It turns out that zsh has a number of additional TRY_RUN calls. We
already set a few with cache variables, add a few more. They are found
based on reading the configure.ac, aczsh.m4, and the configure output.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Phil Eichinger <phil.eichinger@gmail.com>
Cc: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
By default connman periodically saves network interface statistics
into an mmap'd round robin file. These are not accessible over the
D-Bus interface and the only method to interact with this is
ResetCounters() which is marked as experimental.
Continually writing statistics will increase drive wear and may not be
desirable in some devices with limited flash erase cycles, so add an
option to disable this.
Note that connman does not provide any runtime control over this
facility, it can only be disabled via the configure script.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
aplay needs alsa-lib mixer since bump to version 4.0.0 in commit
e843433e18 and
7050c9a818:
In file included from alsa-mixer.c:11:
alsa-mixer.h:16:21: error: unknown type name 'snd_mixer_t'; did you mean
'snd_timer_t'?
16 | int alsa_mixer_open(snd_mixer_t **mixer, snd_mixer_elem_t
**elem,
| ^~~~~~~~~~~
| snd_timer_t
So select BR2_PACKAGE_ALSA_LIB_MIXER instead of building aplay
conditionally to keep backward compatibility
Fixes:
- http://autobuild.buildroot.org/results/d3faac6e49fe9cc21091a5dfa44780b8c63189be
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop fourth patch (already in version)
https://github.com/FreeRDP/FreeRDP/releases/tag/2.8.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Instead of having the user need to figure out that 2 alsa-lib features
are needed for mpv ALSA support, have the top-level mpv option select
the relevant alsa-lib features, when alsa-lib is enabled as already done
for pulseaudio in commit 97cd3680a4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Instead of having the user need to figure out that 2 alsa-lib features
are needed for wine ALSA support, have the top-level wine option select
the relevant alsa-lib features, when alsa-lib is enabled as already done
for pulseaudio in commit 97cd3680a4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Instead of having the user need to figure out that 2 alsa-lib features
are needed for mediastreamer ALSA support, have the top-level pulseaudio
option select the relevant alsa-lib features, when alsa-lib is enabled
as already done for pulseaudio in commit
97cd3680a4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit ea746f3128 forgot to select pcre2
resulting in the following build failure:
Makefile:575: *** pcre2 is in the dependency chain of libmodsecurity that has added it to its _DEPENDENCIES variable without selecting it or depending on it from Config.in. Stop.
Fixes:
- http://autobuild.buildroot.org/results/6528d2611bd1a45c1e94bc6b866de9c33dd90a7b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop patch (already in version)
- Update hash of LICENSE (update in year:
e7ad0370d4)
http://www.netlib.org/lapack/lapack-3.10.1.html
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
pulseaudio needs speexdsp, not speex resulting in the following build
failure since commit 7752afbe4b which
explicitly enable or disable speex:
../output-1/build/pulseaudio-16.1/meson.build:713:2: ERROR: Dependency "speexdsp" not found, tried pkgconfig and cmake
Fixes:
- http://autobuild.buildroot.org/results/8d4c5d5bfd65744753ca75180dd45a01c90f0b91
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Enable MD4 in openssl to avoid the following build failure raised since
the addition of the package in commit
736c4c1655:
In file included from src/lib/md4.c:16:
src/lib/md4.c: In function 'fr_md4_calc':
src/freeradius-devel/md4.h:76:33: error: unknown type name 'MD4_CTX'; did you mean 'FR_MD4_CTX'?
76 | # define FR_MD4_CTX MD4_CTX
| ^~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/a8aa12a8129056391f975820ea3d1d62241ac051
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
PR_CAP_AMBIENT is only available since kernel 4.3 and
58319057b7
resulting in the following build failure since bump to version 1.7 in
commit 07b7f88668 and
9edc5cfc9a:
main.c: In function 'main':
main.c:119:11: error: 'PR_CAP_AMBIENT' undeclared (first use in this function)
prctl(PR_CAP_AMBIENT, PR_CAP_AMBIENT_CLEAR_ALL, 0, 0, 0);
^
Fixes:
- http://autobuild.buildroot.org/results/5a0ad7e1f6de3c37e40c37d8f583fc699a457753
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
the builtin string =~ regexp operator needs to load the regex
module. This operator is used very often in zsh scripts, so
link it statically to avoid the overhead of dynamic loading.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The autoconf scripts seem to assume that no dynamic loader
is available if crosscompiling.
This results in only a small set of modules being enabled
and linked statically.
For comparison, debian patches the fallback to enable
dynamic modules (unconditionally).
This commit enables modules if shared libraries are enabled.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
this directory is used by the rpm package manager, and packages
like systemd will install "macros" for this system.
It should be deleted just like the similar
/usr/share/aclocal directory from Autoconf.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since the source HWDB files are already removed from the target, it
makes little sense to keep the service around. If accidently
triggered it could create an empty database.
The service is installed in both staging and host directory as well and
not removed from there, so a user could craft his own solutions if it's
necessary to update the database.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Up to now, the source files of the hwdb was only cleaned if systemd-hwdb
was used. However, those files should only be used by the hwdb anyway --
otherwise we shouldn't clean them even when the hwdb is enabled.
Therefore, remove them even if hwdb is disabled.
hwdb files can be put in two places: /usr/lib/udev, or /etc/udev. The
former is where systemd-compliant packages would install them, but the
latter is where they were originally placed. In systemd-land, /etc
should only contain local information, so ideally it should be empty in
the rootfs.
The reality, however, is that many packages still install files in /etc.
Thus, there are probably also packages that install hwdb files in
/etc/udev.
Therefore, clean the hwdb files both in /etc/udev and in /usr/lib/udev.
Probably, we should do this cleaning even when systemd is not selected,
since non-systemd packages may install files there which are not
relevant without systemd-hwdb (or eudev). However, that's a bigger
change which needs a separate patch (and a bit more consideration).
While we're at it, get rid of the HOST_EUDEV_SYSCONFDIR variable. This
is a leftover from when udev was still extracted from the systemd
package (i.e. before eudev became a separate package).
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[Arnout: split in two separate commits]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
udevadm has been deprecated for a while for building the HWDB,
systemd-hwdb should be used in its place.
This tool further has a switch to generate the database in
/usr which is a better place for a one-time created file
than the default /etc/udev.
The systemd-hwdb wasn't enabled yet in the host build, so do that.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[Arnout: split in two separate commits]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since many years now, /run is the standard runstate directory for Linux
systems, and Buildroot follows this standard. Encode this as the default
for autotools packages.
Note that the configure script bundled with a package may be generated
with an older version of Autotools, that may not yet support the
--runstatedir option. This will give an "Unsupported arguments" warning
and the option will be ignored. We may have better luck with passing
runstatedir as a variable instead of an option, but chances are that
the configure script doesn't know that variant either (it wouldn't print
a warning in that case). Since the warning is actually preferrable, pass
it as an option after all.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[Arnout: pass as an option instead of an argument after all]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since many years now, /run is the standard runstate directory for Linux
systems, and Buildroot follows this standard. Encode this as the default
for CMake packages.
Note that we don't really care for host packages.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 2e399893b4)
[Peter: drop Makefile change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gdal needs json-c, not libjson, resulting in the following build failure
since the addition of the package in commit
1e64fa2956:
configure: error: could not find json-c/json.h
While at it, also drop unrecognized options:
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --disable-dependency-tracking, --enable-ipv6, --disable-nls, --without-dods-root, --without-fme, --without-grass, --without-libgrass, --without-ingres, --without-jasper, --without-charls, --without-mdb, --without-mongocxx, --without-mrsid_lidar, --without-perl
Fixes:
- http://autobuild.buildroot.org/results/f977675125167806e844a176a4c8c8873557b709
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
license hash is wrong since the addition of the package in commit
1e64fa2956:
ERROR: LICENSE.TXT has wrong sha256 hash:
ERROR: expected: b82e6cca0b13f5db2f22ab667f22254fb1f4b135ea73d5bd6238ef89aff31f6c
ERROR: got : fac0116e799ca4de79b076ee04863b5e2b69541ea3664b9bb108c81a5355f16a
ERROR: Incomplete download, or man-in-the-middle (MITM) attack
Fixes:
- http://autobuild.buildroot.org/results/e443db6d7ff3ae867035d169853b880b5e13d181
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Second newline at the end of licence file was removed upstream, so
update license file hash.
[1] 4c7da65d6f
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There is just a starting year in licence file now (see [1]), but
licence itself did not change.
Also fixup the spacing in the hash file to match the "new" coding
style.
[1] ed24f29e60
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
sortGrid() has been rewritten to dynamically generate stylesheets with
explicit grid-row properties to re-order the rows, instead of removing
and reinserting the cells.
Performance *should* now be comperable to sorttable.js.
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Like all good problems, disparate pieces work together to create
a "synergistically" hairy mess.
The sortGrid() overhaul highlighted a flaw in pkg-stats allowing
for duplicate package class names across rows.
As an example,
boot/barebox/barebox.mk and boot/barebox/barebox/barebox.mk
both get the classname ._barebox and so sortGrid() sticks them on
the same line giving a table with a vestigal row sticking out
of the right side like some kind of appendage.
Also I neglected to add a "_" to the current version column's cells
pkgname class so instead of "._pkgname" we had ".pkgname" and so
the cells were not collected properly as part of the row.
These issues explain the formatting weirdness.
package classnames are now ".path_to_package_makefile" without suffix
(.mk) (so ._boot_barebox_barebox and ._boot_barebox_barebox_barebox
instead of ._barebox) in order to guarantee uniqueness.
and what was *accidentally*
class="centered current_version data .barebox" is now
class="centered current_version data ._boot_barebox_barebox"
just like *all* the other cells in the row. :p
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
nerdctl is a CLI for containerd (package docker-containerd) which is
drop-in compatible with the Docker Daemon CLI.
This allows using the lighter weight containerd daemon directly,
instead of via the additional docker daemon. It also implements
rootless mode.
https://github.com/containerd/nerdctl
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add four new tests for systemd (rw and ro in each case):
- use dbus-broker instead of the original dbus
- use the original dbus, with dbus-broker installed
The first two extend the existing IfUpDown test cases by just enabling
dbus-broker; the second ones extend this further, by explicitly enabling
the original dbus.
For one of the tests, we overload the test_run() function to test that
the dbus-broker daemon is indeed running as root. We need not replicate
that check in the other dbus-broker-only test, and it does not make
sense to test that in tests that have the original dbus enabled.
Presence of the original dbus and dbus-broker on the same system is
valid: the original dbus is used as the default system bus daemon. We do
not test switching between the two at runtime, though as this is really
too corner-case specific. We just test to ensure the original dbus
system bus daemon is not impacted by the presence of dbus-broker.
Note: the 'full' test-case enables all systemd options, and some of them
do pull the original dbus package, so we can't use that to test the
integration of dbus-broker; instead, we extend the ifupdown case, which
does not enable the original dbus.
The default external toolchain for cortex-A9 is the old ARM toolchain
which has kernel headers 4.10 Since dbus-broker needs toolchain headers
>= 4.17, it can't be selected with this toolchain. Switch the systemd
tests to the Bootlin toolchains instead. We switch all of them to make
things easier. Note that we will need to take care in the future that
the headers version used in the bootlin toolchain doesn't get bigger
than the kernel that is used. The kernel is currently 5.10, the headers
in the bleeding edge bootlin toolchain are 5.4.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
dbus-broker fits the bill as a message bus daemon, so only enable the
original dbus if dbus-broker is not enabled.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
dbus-broker is an alternate implementation of a dbus daemon. It can be
used as a drop-in replacement for the system bus daemon, as well as the
session bus daemon.
dbus-broker is (basically, and as far as we're concerned in Buildroot)
split in two components:
- the actual message bus daemon, that relays messages across clients
- a launcher, which is responsible for setting various aspects of the
bus, like setting the policy et al. and opening the socket(s) the
message bus daemon will have to listen on...
The launcher can only be used in a systemd setup (it makes heavy use of
systemd facilities), while the message bus is generic. However, the
message bus daemon is useless without a launcher. There does not exist a
non-systemd launcher, which makes dbus-broker actually a systemd-only
package; this can be revisited when/if a non-systemd launcher appears.
Note, however, that libdbus is not provided by dbus-broker. People who
want to use dbus-broker as the bus daemon, and need libdbus, will have
to enable both.
If only original dbus is enabled, things stay as they are now. This is
for the moment still the default, though we should change that once
dbus-broker has proven to work.
If only dbus-broker is enabled, it installs the necessary socket
activation units and dbus configuration files. The daemon is not
launched at boot time; instead it is socket-activated when a client
connects to the bus the first time.
If both original dbus and dbus-broker are enabled, we have a conflict
with the configuration files, the socket activation file. Also, original
dbus activates the daemon as a service in multi-user.target.wants, so it
is not socket-activated and dbus-broker would never get the opportunity
to start.
Therefore, original dbus is updated to remove the conflicting files and
the activation of dbus-daemon. Since dbus-broker installs some of the
same file that original dbus removes, we have to add a dependency to
make sure that the ones installed by dbus-broker aren't removed.
If both are installed, it is still possible to revert back to using
original dbus as system bus:
- at build-time: by calling systemctl enable/disable from a
post-build script (preferred), or by providing drop-in units
or presets in an overlay (less preferred) or custom skeleton
(as a last resort),
- at runtime (on a RW filesystem): by calling systemctl
enable/disable
Note about the user: the path to the system bus socket is a so-called
"well-known location": it is expected to be there, by spec. Moving it
elsewhere is going to break existing programs. So, the user running the
system bus daemon must be able to create that socket.
As we may have two packages providing a system bus daemon, they have to
be both able to create the socket, and thus must both be able to write
in the directory containing the socket. And since they can be switched
at runtime, they must be running as the same user.
We can't just reference the original dbus user, so we duplicate the
entry. What is important, is that the user be named 'dbus', as that's
what we use in both cases.
If both original dbus and dbus-broker are selected, the dbus user is
included twice, but the specifications are identical so that's fine.
mkusers will create the user only once.
Finally, the licensing terms are pretty trivial for dbus-broker itself,
but it makes use of third-party code that it inherits as git submodules
(that are bundled in the release archive). Thus the licensing is a bit
convoluted... The third-party codes claim to be licensed as "Apache-2.0
and LGP-2.1+" in their AUTHORS files, but at the same time claim
"**Apache-2.0** OR **LGPL-2.1-or-later**" in their README files. The
individual source files (that are used) do not seem to have any
licensing header to clarify the situation. So we represent the situation
with "Apache-2.0 and/or LGPL-2.1+".
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[yann.morin.1998@free.fr:
- don't select systemd; depend on it instead
- only install config files and systemd units without original dbus
- install a user to run the message bus as
- fix licensing info
- entirely reword and extend the commit log
- add myself to DEVELOPERS as well
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Arnout:
- Use dbus-broker as system bus if both are selected.
- Remove conflicting files from dbus installation.
- Simplify symbolic link creation.
- Add comment to remind update of session.conf and system.conf.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The 'rtl8723ds' name, when queried from release-monitoring.org at
https://release-monitoring.org/api/projects/?pattern=rtl8723ds returns
one project, with one "stable_versions" array, which is empty. This
was not expected by the pkg-stats code, causing an exception:
Task exception was never retrieved
future: <Task finished name='Task-764' coro=<check_package_latest_version_get() done, defined at /home/thomas/projets/buildroot/./support/scripts/pkg-stats:558> exception=IndexError('list index out of range')>
Traceback (most recent call last):
File "/home/thomas/projets/buildroot/./support/scripts/pkg-stats", line 566, in check_package_latest_version_get
if await check_package_get_latest_version_by_guess(session, pkg):
File "/home/thomas/projets/buildroot/./support/scripts/pkg-stats", line 544, in check_package_get_latest_version_by_guess
projects[0]['stable_versions'][0],
IndexError: list index out of range
This commit therefore improves the checks done on the results received
from release-monitoring.org to avoid this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pretty straightforward. Adds my name to copyright notice.
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
CSS classes are generated for each package name for sorting purposes,
However some package names start with a number and this is not allowed.
(see https://www.w3.org/TR/CSS2/syndata.html#value-def-identifier)
Fix is to prepend a character to every class name such as "_".
so every ".package" is now "._package".
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This fixes the .version-needs-update class being overridden by .correct class.
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Until now, when BR2_CCACHE=y, ccache support was built into the
toolchain wrapper, and used regardless of whether the toolchain is
using during the Buildroot build itself, or later as part of the SDK.
However, having ccache support forcefully enabled in the SDK can
really be surprising, and is certainly unexpected for a
cross-compilation toolchain. This can be particularly surprising as
the ccache cache directory may be hardcoded in the ccache binary to
point to a folder that does not make sense on the SDK user's machine.
So what this commit does is create a BR2_USE_CCACHE variable, which
when set to 1 tells the toolchain wrapper to use ccache. Not defining
the variable, or specifying any other value that 1 causes the
toolchain wrapper to not use ccache. The main Buildroot Makefile is
modified to export BR2_USE_CCACHE = 1 when ccache support is enabled,
so that ccache is used during the Buildroot build.
However, when someone will use the SDK outside of Buildroot, the
toolchain wrapper will not use ccache.
The BR2_USE_CCACHE variable is only conditionally enabled in the main
Makefile (via ?=) so that it can be overridden in the environment if
one wants to quickly test disabling ccache in a ccache-enabled
Buildroot configuration. This is the scenario that was considered in
commit 792f1278e3 ("toolchain-wrapper:
support change of BR2_CCACHE"), which added the BR_NO_CCACHE variable.
The BR_NO_CCACHE variable is no longer needed, and replaced by this
BR2_USE_CCACHE variable.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
[Thomas: almost entirely rework the implementation and commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Somewhere between binutils 2.35 and 2.37, some functionality was
added in readelf to parse more DWARF information. Unfortunately, as
reported in binutils bug
28981 ("https://sourceware.org/bugzilla/show_bug.cgi?id=28981"), this
feature causes a number of fairly scary warnings to be displayed when
running readelf on binaries built with Clang, such as the pre-built
rustc and rustdoc binaries part of the host-rust-bin package. It
looks like this:
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x23
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Bogus end-of-siblings marker detected at offset 2f in .debug_info section
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Bogus end-of-siblings marker detected at offset 10b in .debug_info section
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Bogus end-of-siblings marker detected at offset 10c in .debug_info section
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Further warnings about bogus end-of-sibling markers suppressed
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x23
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x23
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x23
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x23
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: DIE at offset 0x1da refers to abbreviation number 5827 which does not exist
These warnings are caused by the readelf calls done by the
support/scripts/check-host-rpath script. The annoying thing is that
once host-rust-bin has been installed in $(HOST_DIR), this warning
appears after the installation of every single host package, because
support/scripts/check-host-rpath rescans all binaries every time.
To avoid showing those scary warnings, this commit sends the error
output of readelf to /dev/null.
Of course, it would be nicer to only filter out those warnings, but
filtering the error output without merging the error output into the
standard output is tricky, so let's keep things simple. If there is
really an error, readelf will abort.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since systemd requires a relatively new kernel, we switched to a
self-built 4.19.204 kernel. However, since then, the downloaded kernel
used by the tests has been updated to 5.10, which is certainly recent
enough to support systemd. Switch to this one. This reduces the test
time significantly.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The --testcases option of run-tests says how many test cases to build in
parallel. It automatically derives a jlevel from it by dividing the
number of cores + 1 by the number of parallel testcases. However, this
will typically result in a fractional number. Make doesn't like
fractional numbers as argument to -j.
Convert the number to integer (rounding down).
* br2_jlevel is an int, as multiprocessing.cpu_count() is an int, so it
will be always >=2 (cpu_count() raises an error if it can't determine
the number of CPU, so it will always return at least 1);
* args.testcases is an int, and is checked to be >=1
So br2_jlevel + args.testcases is guaranteed to always be bigger
than or equal to args.testcases, and the division thus bigger than 1.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr:
- ensure division provide at least 1
- drop the test below
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is useful to be able to customize the default env images in post
build scripts.
Signed-off-by: Quentin Barbe <quentin@barbe.me>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We rely on config.toml to be created manually during first boot as
setup stage. Even with an empty config.toml file, the gitlab-runner
needs gitlab registration token to register to a gitlab server.
Use the 14.5.1 release since 14.5.2 and 14.6.0 triggers a build error [1]
due a patch for GO < 1.17.
(helpers/patches/issue_28732/syscall.go:11:2: undefined: syscall.Issue28732Fix)
Tested:
https://gitlab.com/kubu93/buildroot/-/pipelines/442604876
[1] https://gitlab.com/gitlab-org/gitlab-runner/-/issues/28766
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Jérémy Rosen <jeremy.rosen@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Given a .config with:
FOO="1234"
BAR="$(FOO)"
and then:
$(call KCONFIG_SET_OPT,FOO,azerty)
would yield a .config with just:
FOO="azerty"
because \<FOO\> would match the assignment to BAR.
Reported-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: TIAN Yuanhao <tianyuanhao3@163.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The first three lines of all systemd runtime tests are identical, and
they already call into a common function. Therefore, move those lines
into the common function as well.
We need to pass an additional argument for the rootfs type. This changes
the signature, which could create confustion with
InitSystemBase.check_init() that has a different signature. Therefore,
rename the function to check_systemd(). That also allows us to call
self.check_init() directly instead of going through super().
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We currently have no internal and no external toolchain for csky.
The website is down (no https:// available, and the http:// index
page is 404).
This commit removes the architecture entry; remnants will be dropped in
followup changes.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Guo Ren <ren_guo@c-sky.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
