This test is a simple "Hello, World" integration test of the OpenJDK
package.
It compiles the Java app on the host, then runs it on an emulated
AARCH64 target and verifies "Hello, World" is printed.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OpenJDK is a free and open-source implementation of the Java Platform.
This package provides the option to build a client or a server JVM
interpreter.
The default option is the server option, as that is what the majority
of users use. This JVM interpreter loads more slowly, putting more
effort into JIT compilations to yield higher performance.
Unlike most autotools packages, OpenJDK is exceptionally different and
has many quirks, some of which are below:
- X11, alsa, and cups are required to build Java, even if it's a headless build.
See
http://hg.openjdk.java.net/jdk10/jdk10/raw-file/tip/common/doc/building.html#external-library-requirements
for more information.
- host-zip is needed for the zip executable.
- There is no autogen.sh file, instead, a user must call "./configure
autogen."
- OpenJDK ignores some variables unless passed via the environment.
These variables are: PATH, LD, CC, CXX, and CPP.
- OpenJDK defaults ld to the ld binary but passes -Xlinker and -z as
arguments during the linking process, which causes linking failures.
To fix this issue, ld is set to gcc.
- Make -jn is unsupported. Instead, one must use the "--with-jobs="
configure option, and use $(MAKE1).
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[Thomas:
- drop explanations about CC, LD, CXX, etc. be set to their "actual
binaries" instead of ccache: TARGET_CC/TARGET_LD/TARGET_CXX point
to the compiler wrapper, so the usage of ccache is hidden
- make sure at least one of the variants is enabled in Config.in
- drop the submenu for variant selection
- use system zlib instead of the bundled one. This works fine when
BUILD_SYSROOT_CFLAGS and BUILD_SYSROOT_LDFLAGS are passed
- fix minor nits in the Config.in comments]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Prelink-cross emulates a runtime linker for a given sysroot. This is
necessary to allow gobject-introspection to build it's typelib files
during cross-compiling.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: drop Config.in.host file and visible option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This library was previously a part of sunxi-mali.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The package sunxi-mali-mainline is available for recent kernels.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Python library to scan and decode advertised BLE info.
Uses asyncio.
https://github.com/frawau/aioblescan
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig was added in October 2016 and was never updated since
then. It currently fails to build because U-Boot is too old and
doesn't build with host-openssl in version 1.1.x.
On February 13, 2019, the original submitter was notified, but didn't
reply, so let's remove the defconfig for this platform.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/165766194
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OP-TEE performance benchmark tools for the OP-TEE project.
This packages generates embedded Linux based OS materials used
to retrieve execution timing information on invocation of the
OP-TEE secure services.
It is added next to the OP-TEE client package in BR configuration.
This change references in Buildroot the today's latest OP-TEE
revision release tagged 3.4.0.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas:
- drop version selection
- propagate the dependency of optee-client]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OP-TEE test package provide test materials as part of the OP-TEE
project helping platforms to verify their OP-TEE components
against a set of regression and performance tests.
Package is added in the BR package configuration next to the
OP-TEE client package.
This change references in Buildroot the today's latest OP-TEE
revision release tagged 3.4.0 with an added patch to fix an issue
reported by recent GCC toolchains.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas:
- drop version selection
- propagate !BR2_STATIC_LIBS dependency of optee-client
- make sure BR2_TARGET_OPTEE_OS_SDK is selected
- use a patch generated by git format-patch
- simplify the construct to build the examples]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package generates embedded Linux based OS userland client
applications and OP-TEE OS trusted applications all embedded in the
file system. These applications shows how to use the APIs OP-TEE OS is
based on, both in the non secure and secure worlds.
Package is added next to the OP-TEE client package in the BR package
configuration.
This change references in Buildroot the today's latest OP-TEE revision
release tagged 3.4.0 with an added patch to fix an issue reported by
recent GCC toolchains.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas:
- drop version selection
- propagate !BR2_STATIC_LIBS dependency of optee-client
- make sure BR2_TARGET_OPTEE_OS_SDK is selected
- use a patch generated by git format-patch
- simplify the construct to build the examples]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OP-TEE client API library and supplicant daemon from the
OP-TEE project are packaged in package/optee-client. An init script
launches the tee-supplicant deamon. Package is added to the
Security menu of BR configuration.
This change references in Buildroot the today's latest OP-TEE
revision release tagged 3.4.0.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas:
- remove version selection
- add dependency on !BR2_STATIC_LIBS, as it unconditionally builds a
shared library]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Here is the list of the changes compared to the removed mongodb 3.3.4
version:
- Remove patch (not applicable anymore)
- Add patch (sent upstream) to fix openssl build with gcc 7 and
-fpermissive
- Remove 32 bits x86 platforms, removed since version 3.4:
https://docs.mongodb.com/manual/installation/#supported-platforms
- Change license: since October 2018, license is SSPL:
- https://www.mongodb.com/community/licensing
- https://jira.mongodb.org/browse/SERVER-38767
- gcc must be at least 5.3 so add a dependency on gcc >= 6
- Add a dependency on host-python-xxx modules:
https://github.com/mongodb/mongo/blob/r4.0.6/docs/building.md
- Use system versions of boost, pcre, snappy, sqlite, yaml-cpp and zlib
instead of embedded mongodb ones
- Add hash for license files
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
[Thomas:
- add missing depends on BR2_HOST_GCC_AT_LEAST_4_8
- improve comments on depends on
- add missing "comment" for toolchain dependencies
- add missing "depends on BR2_PACKAGE_WPEWEBKIT_ARCH_SUPPORTS" on the
Config.in comment
- add missing "select BR2_PACKAGE_WAYLAND", which is needed to select
BR2_PACKAGE_WAYLAND_PROTOCOLS
- fix typoes in the JIT enabling code that was using
WEBKITGTK_CONF_OPTS instead of WPEWEBKIT_CONF_OPTS]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OP-TEE OS is maintained by the OP-TEE project. It provides an
open source solution for development and integration of secure
services for Armv7-A and Armv8-A CPU based platforms supporting
the TrustZone technology. This technology enables CPUs to
concurrently host a secure world as the OP-TEE OS and a non-secure
world as a Linux based OS.
The OP-TEE project maintains other packages to leverage OP-TEE on
Linux kernel based OSes. An OP-TEE interface driver is available
in the Linux kernel since 4.12 upon CONFIG_OPTEE.
This change references in Buildroot the today's latest OP-TEE
revision release tagged 3.4.0.
https://www.op-tee.org/https://github.com/OP-TEE/optee_os
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas:
- pass CFG_ARM32_core=y when building for ARMv7, otherwise the build
fails
- add a check that verifies that BR2_TARGET_OPTEE_OS_PLATFORM is not
empty
- minor formatting fixes/adjustements.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Paradoxically, building OpenJDK requires a pre-existing JDK. This
pre-existing JDK is called the "boot JDK."
The boot JDK for building JDK major version N should be a JDK of major
version N-1, so for building JDK11, JDK10 would be needed. This
requirement is an issue when building on most distributions, as the
host JDK tends to be JDK8.
The AdoptOpenJDK project provides binaries that can act as the boot
JDK to build the target JDK, which is what this package provides.
Currently, only a x86_64 host is supported, for two reasons:
1) A 32bit x86 binary distribution is not available from AdoptOpenJDK
2) We didn't had access to a host machine using an architecture other
than x86-64
The provided unpack200 has an invalid RPATH and relies on libzlib.
When host-libzlib runs the install step, the following error is
generated:
*** ERROR: package host-libzlib installs executables without proper RPATH:
*** $(HOST_DIR)/bin/unpack200
Because unpack200 is a deprecated tool, removing it after installation
is safe and fixes the issue.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[Thomas:
- fix comments in the code
- use the more usual "cp -dpfr" command to copy files over]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Configuration contains:
- building tpl, spl and u-boot (forked u-boot repository)
- booting from SD card and network via PXE
- working ethernet, usb and uart
- minimal rootfs with busybox
- ready to flash SD card image
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add tool which allows to setup broadcom bluetooth
device via UART.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: add hash for license file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The qtuio package uses the obsolete qt4 package, which we are about to
remove, so remove qtuio as well.
CC: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The python-pyqt package uses the obsolete qt4 package, which we are about to
remove, so remove python-pyqt as well.
CC: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package adds NXP Layerscape and QoriQ reset config word
(RCW) / pre-bootloader (PBL) generation support.
The RCW is used to setup clocking and IO allocations and then launches
the next stage of boot (usually u-boot).
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
GstShark leverages GStreamers newest instrumentation subsystem by
installing a set of custom hooks to the trace points. A variety of
data analytics are extracted and presented to the user in a graphical,
friendly way.
https://developer.ridgerun.com/wiki/index.php?title=GstSharkhttps://github.com/RidgeRun/gst-shark
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: João Victor Oliveira <jv.oliveirag@gmail.com>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Igor Miranda <igorcmiranda3110@gmail.com>
[Thomas:
- fix package prompt to be gtk1-shark in Config.in
- license is LGPL-2.1+, not LGPL-2.1
- add entry to DEVELOPERS file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A free media server.
Stream your media to devices on your home network.
https://gerbera.io
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas:
- fix S99gerbera to be compliant with the init script pattern
that was recently put in place
- add -l option in init script for logging
- license code is GPL-2.0]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
http://autobuild.buildroot.net/results/afd/afdc598b80356a8301d890232466de421f7779d5/
Luacrypto fails to build with openssl 1.1.x. The package has not seen any
functional changes since it was added in 2013 and has no reverse
dependencies.
The upstream repository (https://github.com/starius/luacrypto) explicitly
states:
this project is deprecated, use luaossl
So remove the package.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Utility for testing pluggable authentication modules (PAM) facility.
While specifically designed to help PAM module authors to test their
modules, that might also be handy for system administrators interested
in building a centralised authentication system using common standards
such as NIS, SASL and LDAP.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Peter: drop spelling fix patch]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This tool is used to send commands to imx6 based hardware using NXP's
UTP protocol.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Vincent Prince <vincent.prince.fr@gmail.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains a set of tools to manipulate RTC devices. They
are written and maintained by the RTC subsystem Linux kernel
maintainer, Alexandre Belloni.
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a package for 'shim', an EFI bootloader for secure
boot chain loading.
While gnu-efi supports 32bit ARM, this is currently broken in shim.
Patches to fix this have been submitted upstream but are not included
here for now.
https://github.com/rhboot/shim/pull/162
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: use BR2_PACKAGE_GNU_EFI_ARCH_SUPPORTS, add separate depends
on to exclude ARM32 build.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds the Entertainment Arts Standard Template Library.
The initial version uses the latest hash so that the aarch64 support
is included vs Buildroot having to apply the aarch64 support patch.
Signed-off-by: Maury Anderson <maury.anderson@rockwellcollins.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- add missing BR2_INSTALL_LIBSTDCPP dependency
- use the github helper instead of the git site method, and adjust
hash consequently
- drop INSTALL_TARGET_CMDS, the default cmake-package implementation
works fine]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Ilya Averyanov <averyanovin@gmail.com>
[Thomas:
- add missing dependencies on expat and zlib
- add missing depends on C++ and dynamic library support, and the
corresponding Config.in comment
- add the missing entry to the DEVELOPERS file
- add the missing hash for the license file
- adjust indentation in the Config.in file
- use --disable-unittest instead of --enable-unittest=no.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
His e-mail address is no longer valid. Sending an e-mail to this
address says (yes, the actual text is in French):
Veuillez prendre note que cette adresse n'est plus valide à la suite du départ de l'employé.
which means:
Please take note that this address is no longer valid following the employee departure.
Therefore, it does not make sense to list Sebastien in our DEVELOPERS
file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Vicente is no longer working at Imgtec, and his e-mail is now
bouncing:
<Vincent.Riera@imgtec.com>: host
mxa-00376f01.gslb.pphosted.com[185.132.180.163] said: 550 5.1.1 User
Unknown (in reply to RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Orangepi Lite2 board with below features:
- U-Boot 2018.09
- Linux 4.19.0-rc8
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>