Fixes:
CVE-2015-3991 - denial-of-service and potential remote code execution
vulnerability triggered by IKEv1/IKEv2 messages that contain payloads
for the respective other IKE version.
other IKE version
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2015-3202 - fix exec environment for mount and umount.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2015-3808 CVE-2015-3809 - The LBMR dissector could go into an
infinite loop.
CVE-2015-3811 - The WCP dissector could crash while decompressing data.
CVE-2015-3812 - The X11 dissector could leak memory.
CVE-2015-3813 - The packet reassembly code could leak memory.
CVE-2015-3814 - The IEEE 802.11 dissector could go into an infinite
loop.
CVE-2015-3815 - The Android Logcat file parser could crash.
Patch upstream so drop and disable autoreconf.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 3afbc4f3 (conntrack-tools: uses dlopen(), not available on static
builds) adjusted the dependencies for the comment, but forgot to update the
comment itself.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building ncurses 5.9 with GCC 5.x fails with a syntax error, caused by
earlier preprocessing. This failure is more likely when building for
host (e.g. host-ncurses) that recently updated to GCC 5.x.
This patch is taken from the following link (more information is also
available here):
https://groups.google.com/forum/#!topic/sage-trac/U31shviuqzk
Signed-off-by: Doug Kehn <rdkehn@yahoo.com>
Acked-by: Jaap Crezee <jaap@jcz.nl>
Tested-by: Jaap Crezee <jaap@jcz.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Python setup.py has a function called add_gcc_paths(), which
executes gcc -E -v to get the list of header paths searched by
gcc. However, the logic of setup.py is only valid with the normal
english output of gcc: it doesn't work if a non-english locale is
set. This causes setup.py to not find certain headers (such as zlib.h)
and therefore disabling the build of such extensions.
Reported-by: Bruno Coudoin <bruno.coudoin@gcompris.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Python setup.py has a function called add_gcc_paths(), which
executes gcc -E -v to get the list of header paths searched by
gcc. However, the logic of setup.py is only valid with the normal
english output of gcc: it doesn't work if a non-english locale is
set. This causes setup.py to not find certain headers (such as zlib.h)
and therefore disabling the build of such extensions.
Reported-by: Bruno Coudoin <bruno.coudoin@gcompris.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/7ed/7ed85071bc06b4806e90b278a0736ea70c01b456/
Upmpdcli forgets to take the dependencies of libupnpp into consideration,
breaking static linking, so help it.
Libupnpp unfortunately doesn't provide a .pc file, so manually handle its
dependencies here.
The build system doesn't expand LIBS from the configure step, so manually
pass it to make.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following commit 95a572282e (pkg-infra: move the git download helper to a
script, 2014-07-02), move the comment describing the shallow clone trickery as
well. Merge this comment with the existing helper comment that was added in
7e40a1103a (support/download: convert git to use the wrapper, 2014-08-03).
Rename $($(PKG)_DL_VERSION) to ${cset} to match the helper code context.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When linking statically, the order of libraries on the linker command
line is important, and sconeserver got it wrong.
Also, sconeserver does not use pkg-config, so it misses the private
libs of -lcrypto, which is linking with -lz.
Fix that:
- add a patch to configure.in to fix the order of libraries;
- forcibly pass -lz when linking statically with openssl.
Note: we were already reconfiguring sconeserver, because it comes from
the github repository.
Fixes:
http://autobuild.buildroot.org/results/403/403eac974ecdaacdb66b8241fbdcf19ec5e07480
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop the --disable-optimization option, which makes the libgcrypt configure
remove buildroot's optimization setting passed in from CFLAGS.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gptfdisk cgdisk select nucurses wchar support which is disabled
on bfin with FLAT binary format.
Add the ncurses's reverse dependency to gptfdisk.
Fixes:
http://autobuild.buildroot.net/results/ce3/ce35c072f0b7c3a7a1918cb865a2eecbba8a1b23/
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2015-0847 nbd-server denial of service due to unsafe signal handlers
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since a7134ce674 (libstrophe: bump version), the package does in fact build
and install a shared library, so ensure it also ends up in target so it can
be found at runtime.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libelementary sources include dlfcn.h header when HAVE_FORK symbol is defined;
this is always the case because efl already depends on BR2_USE_MMU.
Fixes:
http://autobuild.buildroot.org/results/07c/07c97918dab24215f5c5130a9cd2788adca0a27d/
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The pcre library bundled in php is not configurable through the usual
--enable/disable options, but wants to be thread-safe by default, so it
wants to use pthreads (uncludes pthread.h and uses pthread_* functions).
So, just override the default configuration to explicitly require the
bundled pcre library be single-threaded when we have no thread and are
not using the external pcre library.
Fixes:
http://autobuild.buildroot.org/results/f50/f50f4e569466ad74e49a3eac9ea2e6cfc4dd30e3/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/c7d/c7d48554d76e39cbdf715721ae51e3516a99f97e/
We're explicitly linking against libintl/libiconv if enabled when linking
statically, but weren't ensuring that those libraries had already been built
before gptfdisk leading to linker issues.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.org/results/04a/04a1c48d484debd7894fd32997ed50d3a0110b93/
Due to weird constructs in the Makefiles, lanplus is always built, even
when explicitly disabled with --disable-lanplus .
So, add a patch to enforce disabling lanplus. We're doing an at-minima
patch just for the upcoming Buildroot release, and to avoid diverging
too far from upstream...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 5504039c4e (neardal: fix readline/libedit detection with static
linking) added the output of pkg-config to the LIBS shell variable without
adding quotes around it, breaking the logic if the output would ever consist
of more than 1 word.
Now, pkg-config --libs ncurses currently only outputs '-lncurses', so
nothing is really broken (for now atleast), but lets add the quotes before
it does or the syntax gets copied somewhere else where it does.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adds functionality to the kconfig infrastructure to merge additional
configuration fragment files to the main configuration file of
kconfig packages, using support/kconfig/merge_config.sh
Typical use-case is when you want your configuration to be
kept in sync with an upstream (def)config file, but do require
some minor local modifications.
Disables -update-config and -update-defconfig targets when
fragment files are set.
[Thomas: take into account comments made by Arnout:
- Minor fixes in the documentation changes
- Add @ before the tests done in the $(1)-update-config and
$(1)-update-defconfig targets.]
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Gergely Imreh <imrehg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise we can end up with various linker issues (E.G. linking shared
against libc for a static build, ..).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The (handwritten) configure script uses pkg-config, so ensure it is
available.
With this in place XT and IPT_LIB_DIR detection works correctly, so drop the
overrides.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use some text from the flashrom website to provide a better Config.in
help text about flashrom.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version adds support for new Intel SoC (e.g. BayTrail) and
spi over usb devices such as pickit2 and ftdi usb-spi.
[Thomas:
- add missing Config.in comment about the thread dependency
- remove 'Requires PCIUtils libraries' from the Config.in help text,
since flashrom now requires more than PCIUtils library, and we
typically don't document such dependencies in Config.in help
texts.]
Signed-off-by: Florent Valette <florent.valette@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch fixes an error during source-check.
Thanks to Thomas for the hint:
http://article.gmane.org/gmane.comp.lib.uclibc.buildroot/116183
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libuuid is picked up by apr when present:
Checking for OS UUID Support...
checking uuid/uuid.h usability... yes
checking uuid/uuid.h presence... yes
checking for uuid/uuid.h... yes
checking for library containing uuid_generate... -luuid
checking for uuid_generate... yes
checking for os uuid usability... yes
$ output/host/usr/bin/i586-buildroot-linux-uclibc-readelf -a output/target/usr/lib/libapr-1.so | grep libuuid
0x00000001 (NEEDED) Shared library: [libuuid.so.1]
[Thomas: move the added chunk a bit further down, and use += instead
of =.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since 1b54fbc925 (qt5base: fix postgresql plugin compile, 2015-02-19)
QT5BASE_CONFIGURE_ENV is never set. Remove it.
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though BR2_PACKAGE_LIBSIGROKCXX is selected, the C++
binding is disabled due to lack of C++11 support in the toolchain.
Configure output:
Enabled language bindings:
- C++............................. no (C++11 compiler required)
So disable libsigrok C++ binding and pulseview for CS powerpc toolchains.
Fixes:
http://autobuild.buildroot.net/results/737/737453011ac0d13ab197258171ffa0f81bc4c368/
[Thomas: use 'depends on !foo && !bar' instead of 'depends on !(foo ||
bar)', seems it looks more logical in this situation.]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add PHP_VERSION_MAJOR variable to php.mk for use by other packages.
E.g. to install the Ioncube loader binary, it is necessary to
know the PHP major version.
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
php-fpm installs a sample status page to $datadir/fpm/status.html
It is not of any use in that directory, so remove it from target.
If someone wants to use it, he can copy it to webroot manually.
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a line to load the opcache extension in php.ini, at the
bottom of the "dynamic extensions" section.
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
aclocal.m4 gets regenerated from acinclude.m4, so patch the last.
Fixes "Extensions are not supported on this platform" error when
loading any external (zend) extension in php.ini.
Was caused by 0001-ditch-unset.patch not being applied to the
correct file, and our ac_cv_func_dlopen=yes env setting being unset.
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#8121
External PHP modules like the OPcache may live in
/usr/lib/php/extensions, so only delete /usr/lib/php/build
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
xtensa gcc is not able to generate correct code when compiling with -O0
enabled by --enable-debug. Instead of disabling package build it with
--disable-debug.
Fixes:
http://autobuild.buildroot.net/results/5d17055027055ffd33fcd28b208130afb26343c9/
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This drops architecture-specific ABI flags, which may be important.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make sure that ntp installs after busybox so that it overrides the busybox
provided ntpd applet.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The comment message shows up if the toolchain has threads instead
of not having threads.
Signed-off-by: Florent Valette <florent.valette@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gpsd always tries to build a shared library, so make it 'depends on
!BR2_STATIC_LIBS'. We also propagate this to the only gpsd reverse
dependency, the location support of sconeserver. While we're at it, we
add a comment indicating the dependencies of this location support,
which was missing.
Fixes:
http://autobuild.buildroot.org/results/f52/f5261a0933f9b5449d1f4e5cab1bb02e7154e683/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 83e29f2656 "gst1-plugins-bad: bump
version" (from 1.2.4 to 1.4.1) removed the configuration options for the
cdaudio and eglglessink plugins as a consequence of their removal in
1.3.1. However, that commit did not remove the corresponding make rules,
so remove them now.
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
uCLibc-ng needs to backport the uClibc commit
de6561f6669308e5d2297589b39a217d4c14df1c to add
PT_GETSIGINFO definition.
This commit is already merged in uClibc-snapshot used by
Buildroot's toolchains for xtensa.
For now, disable ptrace with xtensa uClibc-ng toolchains.
Thanks to Gergely Imreh for the initial investigation and
patch:
http://patchwork.ozlabs.org/patch/470073/
Fixes:
http://autobuild.buildroot.net/results/77b/77b82e5b437d0778b3f6a3813f2c0a5c39b52db9
Reported-by: Gergely Imreh <imrehg@gmail.com>
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building webkit with the SuperH Sourcery toolchain fails with an
assertion in binutils, so let's not allow to select webkit with this
toolchain. We do not need to worry about reverse dependencies, since
we use the existing BR2_PACKAGE_QT_ARCH_SUPPORTS_WEBKIT symbol to add
this new dependency.
Fixes:
http://autobuild.buildroot.net/results/508cdeb67f272b61209f331ab7b990cb56f30817/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This change fixes build of packages depending on opencv and using
pkg-config to get the opencv LDFLAGS, which were wrongly ordered for
static build and included absolute path pointing to the host system
libraries instead of the sysroot ones.
This patch fixes build issues with gst1-plugins-bad and vlc.
This change introduce and new patch to opencv, which is already merged
upstream [1].
Fixes:
http://autobuild.buildroot.net/results/c70/c70f793c7c3b380428d6e2e622a90805cffc4dd1/
... and many others
[1] eceada586b
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fix:
http://autobuild.buildroot.net/results/ce8/ce89ad1ca6aec9f7bb5549301bf4c0dcba9e0e37/
qtwebkit includes qscript headers.
For packages like python-pyqt if webkit is available but not qscript, the
compilation fails with :
buildroot/output/build/python-pyqt-4.11.3/sip/QtWebKit/qwebframe.sip:79:0:
../../../host/usr/i686-buildroot-linux-gnu/sysroot/usr/include/QtWebKit/qwebframe.h:28:36:
fatal error: QtScript/qscriptengine.h: No such file or directory
This problem is not seen with Qt compilation because some relative include
directly from sources are added.
[Peter: also adjust comment]
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
PyQt4 provides two version for some py files: one for python2.x and one for
python3.x. This two versions are installed in TARGET_DIR.
After installing files, python is used to generate all .pyc files, but fails
like :
class ProxyBase(metaclass=ProxyMetaclass):
^
SyntaxError: invalid syntax
This is not a package build failure and this fix is only cosmetic.
This patch suppress directory for not targeted python version.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With NIOS2 toolchain, heirloom-mailx fail to build
due to missing -fPIC when linking with its own getopt.
Since static build for heirloom-mailx is disabled,
always pass -fPIC in CFLAGS.
Fixes:
http://autobuild.buildroot.net/results/333/33346f4555ed403bab7b739dd5d47814efa8eb4c
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
lua-periphery currently clones and builds the c-periphery library by
itself. This causes two problems:
1/ It does not integrate properly with the download infrastructure of
Buildroot, making offline builds impossible since not the entire
source code is downloaded by Buildroot.
2/ It does not use the latest version of c-periphery, which has some
fixes contributed by Vicente to fix c-periphery on MIPS.
This commit fixes:
http://autobuild.buildroot.org/results/0ad/0ad656970b3cbc84b5531b28155ba2f747715fe3/
[Peter: fix minor typo in patch 0001 description]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package is needed as a dependency of lua-periphery. Currently,
c-periphery is automatically cloned by lua-periphery, which causes two
problems:
1/ It does not integrate properly with the download infrastructure of
Buildroot, making offline builds impossible since not the entire
source code is downloaded by Buildroot.
2/ It does not use the latest version of c-periphery, which has some
fixes contributed by Vicente to fix c-periphery on MIPS.
Introducing this package is needed as part of the fix for the
following build failure:
http://autobuild.buildroot.org/results/0ad/0ad656970b3cbc84b5531b28155ba2f747715fe3/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make sure we take into account libgpg-error when linking against
libgcrypt, by adding a patch against xmlstarlet configure.ac. The
handling of static libraries is clearly horrible in this configure.ac
script, using pkg-config would be a lot better, but it's also a lot
more work.
Fixes:
http://autobuild.buildroot.org/results/931/931dede013d94f88fcb5185dac494775603063ec/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 95f9a5c3df fixed the static
linking issue of uboot-tools mkimage against OpenSSL, but in the
process broke the dynamic linking case. This commit adjusts the
uboot-tools patch to make sure both static and dynamic linking work.
An updated version of the patch has been submitted upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes the line endings of the tinyxml2 patches added in
commits 22f5be171c and
0fa452df18. Thanks to Romain Naour for
providing the correct version of the patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 55c83179c4.
Now that binutils bug with --gc-section is fixed this workaroud is no
longer needed.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
elf_xtensa_gc_sweep_hook doesn't correctly unreference symbols that were
made local, that results in link failure with the following message:
BFD (GNU Binutils) 2.24 internal error, aborting at elf32-xtensa.c line
3372 in elf_xtensa_finish_dynamic_sections
elf_xtensa_gc_sweep_hook determines symbol reference type (PLT or GOT) by
relocation type. Relocation types are not changed when symbol becomes
local, but its PLT references are added to GOT references and
plt.refcount is set to 0. Such symbol cannot be unreferences in the
elf_xtensa_gc_sweep_hook and its extra references make calculated GOT
relocations section size not match number of GOT relocations.
Fix it by treating PLT reference as GOT reference when plt.refcount is
not positive.
Fixes:
http://autobuild.buildroot.net/results/3e2e24f697e26c93d4d95782b1cb7799fa620a7a/http://autobuild.buildroot.org/results/97d4c96d6f6cdc1ed4007456f4ab70be9dfa41b5/
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
postgresql currently does not build in BR2_STATIC_LIBS=y
configurations, and since there is little interest in using such a big
piece of software in statically linked configuration, this commit
makes postgresql depends on !BR2_STATIC_LIBS.
Fixes:
http://autobuild.buildroot.net/results/f9ed96d22e91cdba9ad92c4d4ea52e422bf1f1c9/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The acl and attr packages are using autoconf and libtool, but not
automake, which causes all sort of troubles. Some of them are already
worked around in acl.mk and attr.mk, but there is another one: the
libdir variable in the .la file remains empty, which causes libtool to
sometimes be confused about where the acl and attr libraries are
installed.
This was causing build issues with libarchive, but interestingly only
in situations where we had zlib *and* libxml2 also part of the build,
which maybe affects how libtool in libarchive behaves since libarchive
can use zlib and libxml2 as optional dependencies.
So what this patch does is to mungle the libattr.la and libacl.la
files to make sure they contain the right libdir values. Yocto is
doing exactly the same thing.
Upstream attr and acl have been converted fully to automake, so
hopefully the upcoming upstream release will allow us to get rid of
those hacks, but in the mean time, it seems to be the most appropriate
solution.
Here is a minimal defconfig that exhibits the problem, and which
allows to show that this patch fixes it:
BR2_bfin=y
BR2_BINFMT_FLAT=y
BR2_COMPILER_PARANOID_UNSAFE_PATH=y
BR2_INIT_NONE=y
BR2_PACKAGE_LIBARCHIVE=y
BR2_PACKAGE_LIBARCHIVE_BSDCPIO=y
BR2_PACKAGE_ZLIB=y
BR2_PACKAGE_LIBXML2=y
BR2_PACKAGE_ACL=y
Fixes:
http://autobuild.buildroot.org/results/e96/e96c8bec1039d9fe8c6c51fd48b6be0dc8be51d7/
(and many, many similar build failures)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The newly added patch makes sure that gold linker functionality is not
used when doing host builds, since qt5 only tests the availability of
this feature with the target compiler.
Fixes:
http://autobuild.buildroot.net/results/f403a76ac0abbf8488373c0dffb4487f5d98c55d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There are currently two patches with the 0002 sequence number, which
isn't great. Rename one of them to use the 0003 sequence number.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mosquitto triggers the infamous _gp issue with the NIOS 2 toolchains,
so let's not allow mosquitto in such situations.
Fixes:
http://autobuild.buildroot.net/results/b853369452115b0c6f32c6c960af2dbdf71a74af/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The build of boost-log with a uClibc toolchain on PowerPC fails with
some weird C++ issues. Since nobody ever looked into this problem,
let's "fix" the autobuilder issue by not allowing to select boost-log
in such a situation.
Fixes:
http://autobuild.buildroot.net/results/13b43105caf4d3952de70030b51f8d96cf6604ee/
(and many, many similar build failures)
[Peter: also add dependency to comment]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
-q option is missing in BOOST_INSTALL_STAGING_CMDS,
so the build doesn't stop on the first error.
This help to see what happened.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
http://autobuild.buildroot.net/results/d9ec39dc5829aac1b25bfea7484458fcebd68412/
add cstdlib header to ensure EXIT_FAILURE presence
Using some cross-compiling toolchains, EXIT_FAILURE is not always
properly defined without this inclusion.
Patch is upstream:
https://github.com/zeromq/zmqpp/pull/109
[Thomas: use a patch formatted with git format-patch, rather than the
output of 'git show'.]
Signed-off-by: Lionel Orry <lionel.orry@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CMake complains about Policy CMP0037 that reserve some
target name such "test".
So remove the warning by renaming test to xmltest.
Backport an upstream patch:
0b2c22bd46be95b08f234b8b4cb262f72ab3f0e8
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current NIOS 2 toolchains are not capable of building Boost, so
let's disable it and its reverse dependencies. Even though it's not
strictly an architecture dependency, we use the <pkg>_ARCH_SUPPORTS
paradigm for this dependency, since it simplifies a lot handling all
boost reverse dependencies, and is anyway quite similar to an
architecture dependency since we don't display a comment about this
dependency.
Fixes:
http://autobuild.buildroot.net/results/e119b1ef55c546e0d0598b85c46ceefa5c43d5a6/
[Peter: also update mpd comment]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 884af65fd5. Thanks
to the change of the installation path of host-autoconf-archive
macros, host-ola will no longer see them when doing its autoreconf, so
the patch that was added by the commit being reverted here is no
longer needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host-autoconf-archive package was added to provide the necessary
autoconf macros for the libsigrok package, and later also used for the
thrift package.
However, it installs its autoconf macro in
$(HOST_DIR)/usr/share/aclocal, which is part of the include directory
of autoconf macros used for all autoreconf invocations. Unfortunately,
using those macros for all packages is causing a number of
regressions: one on host-ola fixed in commit
884af65fd5, and one in snmpp. Those
packages are autoreconf'ed, but if they are autoreconf'ed with the
autoconf-archive macros installed, they no longer work.
To solve this problem, this commit implements a simple solution that
makes using host-autoconf-archive macros an opt-in mechanism. To
achieve this, the autoconf-archive package is modified to install its
macros in a special directory, and only the packages that really want
to use those macros will have to pass a -I flag pointing to this
directory in their <pkg>_AUTORECONF_OPTS variable.
Fixes:
http://autobuild.buildroot.org/results/712/712c8083b9eeafa41b60790961028c40b28f59ad/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is the most recent version of the package.
Also it fixes static builds (see
http://autobuild.buildroot.net/results/1cc/1ccf0829c13896c000aed1956155a34844207b2f)
with commit http://sourceforge.net/p/arma/code/3569/ that was made right
before 4.400.0 release.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patches touching configure.ac were dropped in 9d9bbf9b79 (rsyslog: bump
to version 8.8.0, 2015-02-25). Remove autoreconf as well.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
--disable-install-libiberty configure option is broken
in gcc 4.8.x, so libiberty.a is always installed in HOST_DIR.
This library broke the host-gdb build due to a fpic/fPIC issue.
Since binutils use a copy of gcc's libiberty sources, it's
affected by the same bug.
binutils-arc-2014.11 which is based on 2.23 branch doesn't have
the PR56780 fixies, so backport them.
Fixes:
http://autobuild.buildroot.net/results/ca4/ca45297aa0ffbc9062ed92dc7ac070b0b33001de/
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Contrary to what commit f5866484f (libnftnl: exclude for CS PPC toolchains)
stated, a missing sa_family_t definition IS specific to the kernel headers
version, and not something particular to the CS toolchains, so instead
require 3.1+ headers.
The specific kernel change fixing the headers is:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=6602a4baf4d1a73cc
The only reverse dependency of libnftnl (nftables) already needs 3.4+, so
this dependency doesn't need to be propagated.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
commit dfbfa6ef (dhcpcd: blacklist Sourcery PowerPC toolchains) blacklisted
specific toolchains, but the issue is actually that the kernel headers
before 3.1 didn't define sa_family_t, so instead require 3.1+ headers.
The specific kernel change fixing the headers is:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=6602a4baf4d1a73cc
The only reverse dependency of dhcpcd (network-manager) already needs 3.7+,
so this dependency doesn't need to be propagated.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For use by packages or post-build/image scripts to fake the current time for
obnoxious programs that insists on adding a timestamp.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The changes are:
d0b4644 mmc-utils: add ability to enable/disable optional eMMC cache
64c2de8 mmc-utils: Add command to set the boot bus conditions
7891236 mmc-utils: add support to create gp partition
4afc8c8 mmc-utils: add check for max enhanced user area
50b6854 fix building errors on Android
f4eb241 Fit usage to 80 cols
c6cb053 mmc-utils: RPMB: add support for 4 rpmb operations
35c31fe mmc-utils: RPMB: add HMAC SHA256 support
a8276f5 fix make handling
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though lxc uses the autotools, it does not use libtool to build
its libraries, and does it manually. It forces building a shared
library. So let's comply with this decision, and mark lxc as not
available in BR2_STATIC_LIBS configurations.
Fixes:
http://autobuild.buildroot.org/results/588/588dc28315a9114374f148bbc64c4ec3d7b4e295/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of hardcoding -lssl -lcrypto as the linker flags to link with
OpenSSL, use pkg-config to fetch those flags. This allows to behave
properly when doing static linking, since pkg-config returns the
entire set of libraries we should link against.
Fixes:
http://autobuild.buildroot.org/results/d71/d710ecfa9ed0a8e3f97d2010d3dabb372485c7f2/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gergely Imreh <imrehg@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a patch to U-Boot to use pkg-config to get the OpenSSL link flags
when pkg-config is available. This allows to make sure that static
linking works properly. The patch requires adding $(TARGET_MAKE_ENV)
so that the Buildroot provided pkg-config is used instead of the host
one.
The U-Boot patch has been submitted upstream.
Fixes:
http://autobuild.buildroot.org/results/a9f/a9f316cd076a74b8730ce4cdcdb8176da4ed9eb3/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gergely Imreh <imrehg@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit aa5254f1a2.
Now that zeromq's pkg-config file is fixed, we no longer need this
workaround for static linking.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These compiler options shouldn't be used when linking statically, and in
particular FLAT binaries cannot use -fPIE and -pie code, so let's teach
libmemcached to not use such flags in those setups.
Fixes:
http://autobuild.buildroot.org/results/8cb/8cbf57f9136cb42be31c88e0f1f32d3d2353e5ff/
and many previous similar build failures
[Peter: rework/reword to do this based on BR2_STATIC_LIBS]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
--disable-install-libiberty configure option is broken
in gcc 4.8.x, so libiberty.a is always installed in HOST_DIR.
This library broke the host-gdb build due to a fpic/fPIC issue.
Note: host-binutils-arc-2014.12 install libiberty.a in HOST_DIR
but it was overwritten by the gcc one. The host-binutils's
libiberty.a also broke the host-gdb build. This should be
fixed in a followup patch.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Qemu doesn't understand sh4a and sh4aeb as separate architectures, it
only knows about sh4 and sh4eb. However, it does support sh4a, since
it emulates the SH7785 CPU which is a SH4A.
Therefore, with this commit, sh4a/sh4aeb are translated as sh4/sh4eb
for Qemu.
Fixes:
http://autobuild.buildroot.org/results/8f9/8f99a776f35d4ab0841d9fd2db509850ef603bd4/
and many previous similar build failures
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds hash file for monolite version 117.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds the hash file for mono 4.0.0.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patch src/Makefile.in to avoid to use autoconf and it's
dependencies.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gnuchess check for libintl library if BR2_NEEDS_GETTEXT_IF_LOCALE is set.
checking for GNU gettext in libintl... yes
checking whether to use NLS... yes
checking where the gettext function comes from... external libintl
checking how to link with libintl... -lintl
But the dependency on gettext package is missing to ensures
reproducible builds.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
--disable-install-libiberty configure option is broken
in gcc 4.8.x, so libiberty.a is always installed in HOST_DIR.
This library broke the host-gdb build due to a fpic/fPIC issue.
Fixes:
http://autobuild.buildroot.net/results/28f/28f3074e99a35f4321dad2fa6c5abdad14d2d2c6/
And many more.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
xtensa trampolines relaxation optimization caused the following build
errors:
Error: operand 1 of 'j' has out of range value '131643'
Error: operand 1 of 'j' has out of range value '4294836162'
Error: operand 1 of 'j' has out of range value '4294836072'
Extra condition 'abs (addr - trampaddr) < J_RANGE / 2' for trampoline
selection results in regressions: when relaxable jump is little longer
than J_RANGE so that single trampoline makes two new jumps, one longer
than J_RANGE / 2 and one shorter, correct trampoline cannot be found.
Drop that condition.
Upstream status: patch submitted.
Fix squashed into the optimization patch.
Fixes:
http://autobuild.buildroot.net/results/5ba7d18262ce6a2dfd69db07d064a971267f1128/
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes: CVE-2015-3414, CVE-2015-3415 and CVE-2015-3416.
For details, see the Debian advisory:
https://www.debian.org/security/2015/dsa-3252
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If those flags are not explicitly passed, the libecore configure
script will include -I/usr/X11R6/include and -L/usr/X11R6/lib in the
compile flags, which are obviously unsafe for cross-compilation.
The fix is similar to 0d9d8984a9 and
da50b6b61c.
Fixes:
http://autobuild.buildroot.org/results/24b/24b578a28455409b7bcc0277abc6b478c51ae67f
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Valgrind fails to build when the host kernel is >=4.0. This patch
backports the commit from upstream that fixes the kernel version
verification. This verification is pointless for buildroot anyway, but
it fixes the building process.
[Peter: rename patch to 0002-* and add SoB, slightly reword commit msg]
Signed-off-by: Christian Artin <christian@gridshowsystems.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Most likely people have already enabled python if they want to use the
bindings for ola, so use depends on instead of select so we don't need to
propagate the dependencies here.
Python already depends on mmu, so drop that here.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Starting from version 5.0 giflib it's no longer compatible with
libungif, also the libungif is now deprecated so just remove the
reference to libungif.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Baruch Siach <baruch@tkos.co.il>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix:
http://autobuild.buildroot.net/results/206/2062208c171207428c9121215971e00c52bf306a/
According to configure-ng.py, PyQt_NoOpenGLES must be added to qtdetail when
QT_OPENGL_ES is set.
[Thomas: add comment to explain the double negation.]
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ax_tls.m4 serial 11 procude a syntax error
in configure scripts.
Fixes:
http://autobuild.buildroot.net/results/619/619339810617212a667fe72278ec727ee992ffbf/
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This optimization alone reduces gnuradio build time for xtensa from 2
hours to 40 minutes.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The configure test runs against LIB_DIR (which is --libdir in configure
parlay) hence it's against the distro openssl version.
On newish openssl versions md2 is disabled by default, and buildroot
doesn't try to enable it (it's obsolete), but if the distro
libcrypto/openssl has it enabled then ipmiutil tries to use it.
Force it off to avoid build breakage. Fixes:
http://autobuild.buildroot.net/results/cd2/cd2e617f8e2b00581ab5936029f85e62ed3259ba/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 7619aba496.
This change causes a number of build issues with poppler / pinentry /
python-pyqt and Qt itself on various architectures, so lets revert it for
now and rework it for the 2015.08 cycle.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The .la fixup handling looks for paths starting with /usr and assumes
that they are missing the installation prefix (i.e. $(STAGING_DIR)). It
already handles the cases that $(STAGING_DIR) itself and $(BASE_DIR)
are under /usr, but it does not yet handle the case that a
pre-installed external toolchain is under /usr (and tracks that fact
in some .la file). For instance, if you use buildroot to generate a
toolchain with HOST_DIR=/usr/local/some_path, this problem will occur.
Fix this in the same way as $(STAGING_DIR) and $(BASE_DIR), but in
addition check that TOOLCHAIN_EXTERNAL_INSTALL_DIR is non-empty. For
internal toolchains, it is empty and the sed expression would fail.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reported-by: Carlos Soto <csotoalonso@gmail.com>
Cc: Carlos Soto <csotoalonso@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libfreeimage fails to build on ARC, due to compiler issues:
Error: invalid register number `63'
This should probably be fixed at the compiler level.
It also fails to build on Blackfin, due to numerous libfreeimage
issues:
1/ Missing LL suffixes in Source/OpenEXR/IlmImf/ImfFastHuf.cpp. This
can be fixed by backporting upstream OpenEXR commit
57ecf581d0.patch.
2/ Invalid characters in libraw_x3f.cpp. This can be fixed by
applying dos2unix on the file.
3/ Usage of too long constants in an unsigned long in
dcraw_common.cpp, in code like "id == 0x4434303430" where id is
an "unsigned long" i.e 32 bits on 32 bits platform.
Due to (3) being apparently unsolved upstream, and causing a build
error on Blackfin, we disable libfreeimage on this
architecture. However, this code seems so broken that making
libfreeimage as entirely broken would maybe be a better option.
Fixes:
http://autobuild.buildroot.org/results/b33/b3372581c82786cc0a87f8cc2e78f047cc079255/ (ARC issue)
http://autobuild.buildroot.org/results/f3b/f3bd6be448cffed3caae7850233168e6d0f6a5bd/ (Blackfin issue)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gdbserver does not build on Blackfin FLAT (undefined reference to
`_td_thr_tlsbase') and while it builds on Blackfin FDPIC, it's pretty
unlikely that it is going to work properly with the cross-gdb provided
by the Analog Devices toolchain: the Analog Devices toolchain provides
a 6.6 cross-gdb, while we use gdb 7.8.2 for gdbserver.
Therefore, let's simply disable gdb completely for Blackfin.
Fixes:
http://autobuild.buildroot.org/results/2e5/2e5310d0e869f036ec70b978c62c7bd9d3d2bd70/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default libcurl uses the C library's DNS resolver which is
synchronous, even if an application is using libcurl's non-blocking mode
of operation.
Configure libcurl to use c-ares if it is selected so that it can resolve
addresses asynchronously if required.
[Peter: explicitly disable c-ares support if not enabled]
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
According to Thomas's remark [1], (e)glibc toolchains provide it's
own argp.h version.
Also, it appears that argp.h from glibc is more up to date should
be preferred to argp-standalone one.
[1] http://lists.busybox.net/pipermail/buildroot/2015-May/127511.html
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In static linking scenarios, poppler doesn't find libtiff because it
doesn't use pkg-config, so it doesn't know which additional libraries
it should link with to test the availability of libtiff. We help
poppler in this work by passing a LIBTIFF_LIBS variable, resulting for
a pkg-config invocation.
Also, since poppler uses pkg-config, we make this dependency explicit
in this patch, even though it was already carried by the fontconfig
dependency.
Fixes:
http://autobuild.buildroot.org/results/be7/be78957dd852233c81bd364ddf664564ce8f0208/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When configuring poppler, a shell error occurs:
./configure: line 19741: test: x: unary operator expected
This is due to an invalid configure test, which is fixed by a newly
added patch. We patch the configure script directly because poppler
doesn't autoreconf properly. A patch on configure.ac has been
submitted upstream so that hopefully we can drop our patch in a future
release of poppler.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux kernel does force compile with -m4-nofpu, which is only
available when building a multilib toolchain.
The interesting part here is, that buildroot use --disable-multilib for
gcc configure, but enables --with-multilib-list=m4,m4-nofpu in
the default configuration for Qemu targeting r2d emulation.
This results in a toolchain, which can be used for the kernel and
for userland without creating a multilib toolchain with different
kinds of libgcc version. In the multilib case there would be
subdirectories created (!m4 and m4-nofpu). As buildroot uses a
short version of toolchain creation, a multilib enabled gcc build
fails when creating libgcc.
So the best solution is to just keep multilib disabled, but always
add --with-multilib-list when sh4/sh4eb/sh4a/sh4aeb is choosen.
Tested with sh4/sh4a toolchain build and qemu defconfig with
gcc 4.8.x/4.9.x (with and without C++ enabled), uClibc and glibc.
Disable sh4a/sh4aeb for uClibc, as it does not implemented, yet.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(ARM and SH4 uClibc toolchain builds)
If those flags are not explicitly passed, the libecore configure
script will include -I/usr/X11R6/include and -L/usr/X11R6/lib in the
compile flags, which are obviously unsafe for cross-compilation.
The fix is similar to "package/efl/libevas: x-includes and x-libraries
must be set for cross-compiling" done by Romain Naour on libecore.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
evas_engine_software_xlib_cflags and evas_engine_software_xlib_libs
contains unsafe libraries paths if x-include and x-libraries are
not set in libevas.mk.
config.log:
evas_engine_software_xlib_cflags='-I/usr/X11R6/include'
evas_engine_software_xlib_libs='-L/usr/X11R6/lib -lX11 -lXext'
Fixes:
http://autobuild.buildroot.net/results/e5f/e5fb1e62cb634b20233751b4ea3b0630de70e9e0/
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cc-tool provides support for Texas Instruments CC Debugger
Signed-off-by: Marcin Bis <marcin@bis.org.pl>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: avoid adding /usr/local to library path]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Set date.timezone in php.ini to match time zone settings.
Prevents a warning being logged about it not being set
each time a PHP date/time method is used.
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove low-level settings from config.txt like arm_freq and sdram_freq.
The defaults should be good for most and differ by Pi model.
E.g. the Pi 2 runs at 900 Mhz by default, setting arm_freq=700
like we had previously would underclock it.
Add short description in comments to options.
Mention initramfs option.
Remove obsolete options from cmdline.txt
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch:
* bumps mono version to 4.0.1.
* Removes no more needed patches included upstream
* Removes profile switches no more present in configure
[Thomas:
- add Config.in.legacy handling for the removed options.
- remove the select that ensured at least one of the .Net runtime
version was enabled.]
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This bump is required for proper compiling mono 4.0.1.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that custom versions are properly excluded from the list, we can add
a hash for the version we package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We can safely reference XENOMAI_SOURCE, even though it is defined later,
because BR_NO_CHECK_HASH_FOR is a recursively-expanded variable, so its
content is only evaluated when the variable is referenced.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, assigning to BR_NO_CHECK_HASH_FOR but referencing variable
assigned to later, fails. Here's a failing test-case, which is the
reduced test-case of how we handle BR_NO_CHECK_HASH_FOR for now (warning
added for test-case):
export BR_NO_CHECK_HASH_FOR
BR_NO_CHECK_HASH_FOR += $(XENOMAI_SOURCE)
XENOMAI_VERSION = 2.6.4
XENOMAI_SOURCE = xenomai-$(XENOMAI_VERSION).tar.bz2
$(warning BR_NO_CHECK_HASH_FOR='$(BR_NO_CHECK_HASH_FOR)')
all:
Run it with simply make:
$ make
BR_NO_CHECK_HASH_FOR=' '
Now, change the first line to read:
export BR_NO_CHECK_HASH_FOR =
And we now get:
$ make
BR_NO_CHECK_HASH_FOR=' xenomai-2.6.4.tar.bz2'
This new behaviour will be needed later for Xenomai, which handles the
version string in an unusual way, so we can exclude its custom versions.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
argp-standalone provide libargp.a and argp.h which are
never used in libpthsem.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
HOST_CONFIGURE_OPTS is a superset of HOST_MAKE_ENV, so there is no need to
pass them both. Also use HOST_CONFIGURE_OPTS for the install step for
consistency, and finally, add host-pkgconf to _DEPENDENCIES as it is
explicitly used (currently gets pulled in by host-libusb though).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
host-imx-usb-loader uses pkg-config to find libusb-1.0, but since it's
a host package, pkg-config needs to be passed the appropriate
environment variables, which are in $(HOST_CONFIGURE_OPTS). Therefore,
we now pass $(HOST_CONFIGURE_OPTS) in the environment when building
host-imx-usb-loader.
Fixes:
http://autobuild.buildroot.org/results/fba/fba11afe003c512ed5c529c417f3a0feb920b0ed/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now network-manager depends on glibc, there is no need anymore for the
wchar and threads dependencies (implied by glibc). So remove them.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
