Small improvements to on-screen use only. CLI -B and GUI 'B' to toggle
boxes around stats. CLI -^ and '^' to change units for Disk I/O KB/s ->
MB/s -> GB/s. This happen temporarily too if the size of the statistic
will not fit on-scree. Code changed to ensure clean compile for GCC 12
which does extra checks but got confused by some perfectly good C code!
Note: updated makefile makefile
https://nmon.sourceforge.io/pmwiki.php?n=Site.CompilingNmon
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop LDFLAGS_EXTRA to fix the following build failure raised since
commit 42f2518023:
/home/buildroot/autobuild/run/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/mipsel-buildroot-linux-gnu/12.3.0/../../../../mipsel-buildroot-linux-gnu/bin/ld: stress-crypt.o: in function `$L17':
stress-crypt.c:(.text+0x2dc): undefined reference to `crypt_r'
Fixes:
- http://autobuild.buildroot.org/results/0c1d2ef59b88ebb3ae10bf8cb986280b4c1283eb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have a template generating an equivalent genimage configuration.
The generated genimage is identical to these +/- file ordering and a
trailing comma / newline that is ignored by genimage, E.G. for rpi3-64:
@@ -8,9 +8,10 @@
"rpi-firmware/cmdline.txt",
"rpi-firmware/config.txt",
"rpi-firmware/fixup.dat",
- "rpi-firmware/start.elf",
"rpi-firmware/overlays",
- "Image"
+ "rpi-firmware/start.elf",
+ "Image",
+
}
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The rpi genimage configurations are all identical, except for the boot
partition files, which include:
- Device tree files (*.dtb)
- rpi-firmware files (rpi-firmware/*)
- Kernel image (Image/zImage)
All of these are quite simple to figure out programmatically based on the
content of BINARIES_DIR, so extend post-image.sh to fall back to generating
a genimage configuration based on genimage.cfg.in if a board specific one
does not exist.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2023-35852: In Suricata before 6.0.13 (when there is an
adversary who controls an external source of rules), a dataset
filename, that comes from a rule, may trigger absolute or relative
directory traversal, and lead to write access to a local filesystem.
This is addressed in 6.0.13 by requiring allow-absolute-filenames and
allow-write (in the datasets rules configuration section) if an
installation requires traversal/writing in this situation.
- Fix CVE-2023-35853: In Suricata before 6.0.13, an adversary who
controls an external source of Lua rules may be able to execute Lua
code. This is addressed in 6.0.13 by disabling Lua unless allow-rules
is true in the security lua configuration section.
- Drop first patch (not needed since
c8a3aa608e)
https://github.com/OISF/suricata/blob/suricata-6.0.14/ChangeLog
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix CVE-2023-38633: A directory traversal problem in the URL decoder of
librsvg before 2.56.3 could be used by local or remote attackers to
disclose files (on the local filesystem outside of the expected area),
as demonstrated by href=".?../../../../../../../../../../etc/passwd" in
an xi:include element.
https://gitlab.gnome.org/GNOME/librsvg/-/blob/2.50.9/NEWS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The COPYING also contains a BSD-3-Clause license. The BSD-3-Clause
applies to "manual page unifdef.1 and the portability support code in
the FreeBSD subdirectory". The BSD-2-Clause applies to everything else.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Reviewed-by: Thomas Devoogdt <thomas@devoogdt.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The tools are not needed at runtime, as they are mosty examples, or as
testing tools, the latter having additional dependencies.
Fixes:
http://autobuild.buildroot.net/results/059/059a8581fb809488ad6fa3183874395ebf3f0926/
This package is not part of any older buildroot release, no backport
necessary.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 84c24ab1b5 (package/nodejs: fix parallel build) made use of
BR2_JLEVEL to set the number of jobs nodejs should use instead of using
the number of CPUs (+2).
However, BR2_JLEVEL can be set to 0 by the user, to let Buildroot detect
the number of CPUs (+1), and stores it in PARALLEL_JOBS, and leaves
BR2_JLEVEL untouched, so 0.
Thus, we can end up spawning a build by passing -j0 to ninja, which it
interprets as "no -limit yolo" and does not limit the number oj jobs it
spawns, which usually ends up in an OOM somewhere...
Fix this by using PARALLEL_JOBS.
Reported-by: Cédric & Co
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix CVE-2023-3341: The code that processes control channel messages sent
to `named` calls certain functions recursively during packet parsing.
Recursion depth is only limited by the maximum accepted packet size;
depending on the environment, this may cause the packet-parsing code to
run out of available stack memory, causing `named` to terminate
unexpectedly. Since each incoming control channel message is fully
parsed before its contents are authenticated, exploiting this flaw does
not require the attacker to hold a valid RNDC key; only network access
to the control channel's configured TCP port is necessary. This issue
affects BIND 9 versions 9.2.0 through 9.16.43, 9.18.0 through 9.18.18,
9.19.0 through 9.19.16, 9.9.3-S1 through 9.16.43-S1, and 9.18.0-S1
through 9.18.18-S1.
https://ftp.isc.org/isc/bind9/9.16.44/CHANGES
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 9266ab06e0)
[Peter: drop Makefile change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Drop patches (already in version) and so drop autoreconf
- Update hash of BSD_LICENSE (update in year:
551657bfbf)
https://github.com/hreinecke/sg3_utils/blob/v1.48/ChangeLog
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 6.4.x series is now EOL upstream, so drop the linux-headers option
and add legacy handling for it.
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Drop all patches (already in version)
- Update hash of LICENSE file (year updated with
f035303b8a)
https://github.com/Cyan4973/xxHash/releases/tag/v0.8.2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changelog:
http://www.gnuplot.info/ReleaseNotes_5_4_9.html
Signed-off-by: Michael Fischer <mf@go-sys.de>
[Peter: use --without-qt for consistency]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>