Remove the patch that's now upstream.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[Peter: drop _AUTORECONF]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove the patch that's now upstream.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
- CVE-2019-14271: In Docker 19.03.x before 19.03.1 linked against the GNU C
Library (aka glibc), code injection can occur when the nsswitch facility
dynamically loads a library inside a chroot that contains the contents of
the container
Signed-off-by: Christian Stewart <christian@paral.in>
[Peter: mention security impact]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
- CVE-2019-14271: In Docker 19.03.x before 19.03.1 linked against the GNU C
Library (aka glibc), code injection can occur when the nsswitch facility
dynamically loads a library inside a chroot that contains the contents of
the container
Signed-off-by: Christian Stewart <christian@paral.in>
[Peter: mention security impact]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
containerd 1.2.9/gRPC:
- CVE-2019-9512: Some HTTP/2 implementations are vulnerable to ping floods,
potentially leading to a denial of service. The attacker sends continual
pings to an HTTP/2 peer, causing the peer to build an internal queue of
responses. Depending on how efficiently this data is queued, this can
consume excess CPU, memory, or both
- CVE-2019-9514: Some HTTP/2 implementations are vulnerable to a reset
flood, potentially leading to a denial of service. The attacker opens a
number of streams and sends an invalid request over each stream that
should solicit a stream of RST_STREAM frames from the peer. Depending on
how the peer queues the RST_STREAM frames, this can consume excess memory,
CPU, or both
- CVE-2019-9515: Some HTTP/2 implementations are vulnerable to a settings
flood, potentially leading to a denial of service. The attacker sends a
stream of SETTINGS frames to the peer. Since the RFC requires that the
peer reply with one acknowledgement per SETTINGS frame, an empty SETTINGS
frame is almost equivalent in behavior to a ping. Depending on how
efficiently this data is queued, this can consume excess CPU, memory, or
both
containerd 1.2.10/runc:
- CVE-2019-16884: runc through 1.0.0-rc8, as used in Docker through
19.03.2-ce and other products, allows AppArmor restriction bypass because
libcontainer/rootfs_linux.go incorrectly checks mount targets, and thus a
malicious Docker image can mount over a /proc director
Signed-off-by: Christian Stewart <christian@paral.in>
[Peter: mention security impact]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerability:
- CVE-2019-16884: runc through 1.0.0-rc8, as used in Docker through
19.03.2-ce and other products, allows AppArmor restriction bypass because
libcontainer/rootfs_linux.go incorrectly checks mount targets, and thus a
malicious Docker image can mount over a /proc directory.
Signed-off-by: Christian Stewart <christian@paral.in>
[Peter: mention security impact]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Added bugfix patch to fix known issue suggested by upstream:
https://github.com/intel/libva/releases/tag/2.6.0
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 5.3.x series is now EOL so remove the option and add legacy
handling for it.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop patch (refused by upstream) and use CLIENT_STATIC_LDADD that has
been added in version 1.6.8 with
6bde209799
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Version 4.11.3 fixes
CVE-2019-14861: Samba AD DC zone-named record Denial of Service in DNS
management server (dnsserver).
CVE-2019-14870: DelegationNotAllowed not being enforced in protocol
transition on Samba AD DC.
Changelog:
https://www.samba.org/samba/history/samba-4.11.3.htmlhttps://www.samba.org/samba/history/samba-4.11.4.html
Removed patches applied upstream, rebased patch 0002.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The hyperv integration services offer convenience features for guest
operating systems running on the microsoft hyperv virtualization
platform. They roughly are for HyperV what openvmtools are for VMWare.
The installed binary names are derived from what seems common in large
distros like RedHat:
linux kernel source name -> installed binary name
hv_vss_daemon -> hypervvssd
hv_kvp_daemon -> hypervkvpd
hv_fcopy_daemon -> hypervfcopyd
Each tool was introduced at different points in the kernel history, so
we need to check each of them.
We provide a single init script that is responsible for starting all
enabled programs. The global status will be the status of the last
program to fail to start, or empty (i.e. success) if they all started
successfuly.
However, we provide one systemd unit per program, because it is not easy
to use a single unit to start (and monitor) more than one executable.
Additionally, we do not provide a template that is filled at tinstall
time either, because it does not gain much (three simple units vs. a
template and some replacement code in the .mk).
Finally, the key-value daemon uses a few helper scripts to get/set the
network config. All are optional (their presence is checked before
running them), but one, hv_set_ifconfig. However, it is not strictly
speaking required either, so we just symlink it to /bin/true to avoid
any warning at runtime. Providing actual helpers is left to the end
user, to adapt to their own environment.
Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
[yann.morin.1998@free.fr:
- aggregate all three tools in a single sub-package
- introduce the main HV option, use a sub-option for each tool
- aggregate the three init scripts into one
- don't install the helpers; symlink the mandatory one
- don't create symlinks for systemd units (systemctl preset-all does
it for us now)
- expand commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some linux tools (e.g. the Microsoft HyperV convenience utilities) will
install programs tostart at boot time, so they need to be able to
install init files (systemd units, sysv init script, or openrc units).
Unlike the other commands, we are redefining the real _INSTALL_INIT_*
macros, rather than use hooks, to let the infra call those at the right
moment.
We must be careful about the openrc support, though: if two tools are
enabled, one which provides sysv scripts but no openrc config, and the
other which provides openrc config, and we are using openrc as init
system, then we want to use the sysv scripts from the former as well as
the openrc config of the latter. Thus we need to duplicate a bit the
openrc logic here.
Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
[yann.morin.1998@free.fr:
- define macros, not hooks
- introduce support for openrc too
- expand commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test-case for python-gitdb2 consists solely in verifying that the
module can indeed be imported.
However, flake8 errors out on unused imports. Furthermore, it also
errors about wildcard imports, as it can detect unused symbols.
Commit d8c86be9cd (support/testing: fix python-gitdb2 test) tried to
address this issue, by explicitly squelching the two errors, F401 and
F403.
While that works on recent distros, the image used by our docker
pipeline is laggign behind and the flake8 there only handles at most a
single error in the noqa list.
Do as is done with the other python samples, and just blindly ignore
all errors.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Small update with several memory leaks fixed.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 9fa2add810 (support/testing: add test for python-avro) added a
test for python-avro but failed to update .gitlab-ci.yml. Do that now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Set AM_CFLAGS to an empty value to avoid the following redefinition
error when building with our custom _FORTIFY_SOURCE:
/accts/mlweber1/rc-buildroot-test/scripts/instance-1/output/host/bin/mips-linux-gnu-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -Werror -Wuninitialized -Wundef -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -D_FORTIFY_SOURCE=1 -Wp,-MMD,3rdparty/hmac_sha/.hmac_sha2.o.d,-MT,3rdparty/hmac_sha/hmac_sha2.o -c 3rdparty/hmac_sha/hmac_sha2.c -o 3rdparty/hmac_sha/hmac_sha2.o
<command-line>:0:0: error: "_FORTIFY_SOURCE" redefined [-Werror]
Fixes:
- http://autobuild.buildroot.org/results/cfef9315441b5f4909b58a6dccd8bea8e67ae992
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If the linux-pam package is selected, add the package to the
dependency list and explicitly set --enable-plugin-auth-pam.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
