It is possible to use ACPI to monitor the battery with the battery
mini-applet. If ACPI is not explicitly enabled, then APM is used if
available; if ACPI is not explcitly enabled and APM is not available,
then the battery applet is not built.
However, APM is not really current nowadays, and possibly missing for a
bunch of architecture...
What is a pity is that there is no way to explicitly enable or disable
the applet; it only relies on auto-detection... :-(
So, forcibly use ACPI on platforms that have it, that is x86 (32- and
64-bit) and AArch64.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
matchbox can use xlib_libXfixes to completely and really hide the
cursor, so build-depend on it if enabled.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
matchbox selects xlib-libXcursor, but does not build-depend on it.
But xlib-libXcursor is only an optional dependency.
Fix that by removing the select, and properly build-depend on it when
it is enabled.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We usually explicitly enforce disabling optional support when it is
possible.
Do so for Cairo.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
xlib-libXft is only needed when building a 'standalone' matchbox, which
means not using matchbox-lib.
But we *are* building matchbox-lib, and we do not support the standalone
mode (and probably won't, as even upstream says it is ugly, by lack of
theming).
Similarly, xlib-libXext is only used for its 'xsync' extension, for
which support is entirely commented-out in matchbox.
So, drop the dependency on xlib-libXft, and make it explicit we're not
building either standalone modes; drop xlib-libXext.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since this is a non-obvious dependency, just select the appropriate
library.
Also, add a comment to act as a separator between matchbox' options
and the other matchbox packages.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We're about to add a few more options, so it now warrants a menu for
itself.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building with the experimental support for compositing is broken:
/home/ymorin/dev/buildroot/O/host/usr/bin/arm-linux-gnueabihf-gcc
-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
-Os -o matchbox-window-manager main.o wm.o base_client.o main_client.o
toolbar_client.o toolbar_client_alt.o dockbar_client.o dialog_client.o
select_client.o desktop_client.o ewmh.o misc.o client_common.o keys.o
list.o stack.o composite-engine.o session.o mbtheme.o xml.o
-lmb -lX11
-L/home/ymorin/dev/buildroot/O/host/usr/arm-buildroot-linux-gnueabihf/sysroot/usr/lib
-lXext -lXcomposite -lXdamage -lXfixes -lXrender
-L/home/ymorin/dev/buildroot/O/host/usr/arm-buildroot-linux-gnueabihf/sysroot/usr/lib
-lX11 -lexpat
-L/home/ymorin/dev/buildroot/O/host/usr/arm-buildroot-linux-gnueabihf/sysroot/usr/lib
-lXfixes
composite-engine.o: In function `gaussian':
/home/ymorin/dev/buildroot/O/build/matchbox-1.2/src/composite-engine.c:65:
undefined reference to `exp'
That's because it forgets to link with -lm.
However, adding "MATCHBOX_CONF_ENV = -lm" does not solve the issue, as
it still does not link with -lm at all.
Furthermore, the package does not autoreconf, since it is missing the
gconf m4 macros, and Buildroot does not have a package for gconf, hence
we can not even patch Makefile.am and autoreconf.
Patching Makefile.in (in addition to .am) could be a solution, but
support for compositing is explicitly marked as being experimental.
So, just forcibly disable it altogether.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot does not have a gconf package, so explicitly disable gconf
support (to avoid it ends up picking the host one).
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Previously, matchbox-startup-monitor was forcibly enabled whenever
startup-notification was. Now that it has a prompt, it merely defaults
to 'y' in this case, leaving the user the possibility to disable it.
This is not very logical.
Instead, invert the logic, and select startup-notification from
matchbox-startup-monitor.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently do not have that many packages without a prompt, and when
we do, they are limited to system-related packages that can't be
selected or are forcibly selected under various system-specific
conditions.
This is clearly not the case for the matchbox sub-packages, so just give
them a prompt, even when they are forcibly selected by the main matchbox
package, and can't be selected without it.
That will at least tell the user those packages exist and are to be
built.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
matchbox-fakekey build-depends on xlib_libXtst, but does not select it.
Fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
matchbox-common can be used by both matchbox-desktop and matchbox-panel,
so it needs to depend on either, not both.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Most of the matchbox packages build-depend on matchbox-lib, but were not
selecting it from their Config.in.
Fix that.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use the package names instead of some fancy human-readable strings. ;-)
Note: the matchbox package is really named matchbox-window-manager by
upstream. However:
- it already is in a section of the menu title 'X window managers'
- users are probably only looking for 'matchbox'
- keeping just 'matchbox' keeps it in sync with the Kconfig variable,
and allows us to not handle a legacy entry (see a previous commit)
- matchbox-window-manager is a bit long. ;-)
So, in this case, the short 'matchbox' prompt is used instead of the
real upstream name.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We usually do not have a sub-directory for a family of related
packages, so move matchbox packages one directory higher, so they
all are in packages/
Also re-order packages alphabetically.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the matchbox entry in the menu is a non-package entry, that
forcibly selects the matchbox-wm package, which is the real matchbox WM.
So, get rid of the current matchbox option, rename the existing
matchbox-wm to simply matchbox, so we have a real package from the
onset.
Since we're re-using the previous option for the WM package, there is no
need for an entry in the legacy menu.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The new home of the matchbox project is with the Yocto project.
The old home was already redirecting to it anyway, but better point
directly to the official location.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that the matchbox package no longer forcibly add entries to the
PACKAGES list, and entirely relies on having proper packages, we can
safely include all matchbox sub-packages .mk files, and the pkg-infra
will take care of building only those that are enabled.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, matchbox-startup-monitor is missing a Kconfig entry, but is
so far solely a build-time dependency of matchbox-panel.
So, make it a real package, and only build-depend on it when enabled.
Fix the condition to build-depend on it.
To keep the existing behaviour, default to 'y' when startup-notification
is enabled.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, matchbox-keyboard is treated as if it were an option of the
matchbox package.
But that's not true, since it is a real package all by itself, with its
own archive and its own buildsystem.
So, make it a real package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, matchbox-fakekey is missing a Kconfig entry, but is so far
solely a build-time dependency of matchbox-keyboard.
So, make it a real package, and select it from matchbox-keyboard.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, matchbox-common is treated as if it were an option of the
matchbox package.
But that's not true, since it is a real package all by itself, with its
own archive and its own buildsystem.
So, make it a real package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, matchbox-desktop is treated as if it were an option of the
matchbox package.
But that's not true, since it is a real package all by itself, with its
own archive and its own buildsystem.
So, make it a real package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, matchbox-panel is treated as if it were an option of the
matchbox package.
But that's not true, since it is a real package all by itself, with its
own archive and its own buildsystem.
So, make it a real package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similarly to what we just did for matchbox-lib, we make matchbox-wm a
real package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the matchbox package is using weird, legacy constructs to
build its different parts.
Notably, it adds matchbox-lib to the list of packages to build, even
though it is not a real package since it does not have a Kconfig entry.
Fix that:
- add a Kconfig entry for matchbox-lib
- select it from the top-level matchbox package
Note that matchbox-common already depends on matchbox-lib.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Nothing more than removing white spaces before '\' characters.
Of course, 'git diff -w' shows no change at all.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2015-4171 - rogue servers with a valid certificate
accepted by the client to trick it into disclosing its username and even
password (if the client accepts EAP-GTC).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The hash file is updated accordingly.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it's a no-op for sh4.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package building script is several years old and unused by buildroot.
opkg users looking for a current version of this script should visit the
opkg-utils repository at http://git.yoctoproject.org/cgit/cgit.cgi/opkg-utils/,
where this script is maintained and versioned.
Signed-off-by: Vanya Sergeev <vsergeev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove "Disable tests and manpages" patch because opkg no longer
builds C tests into libopkg as of commit
ef8ae066cfa898b6366198e429cbeb4c94c92939.
Remove "Fix libtool issue with recent libtool" patch because the patch
comments indicate that it is no longer required with opkg version
0.3.0.
Select libarchive package dependency, as opkg requires it as of
release opkg-0.3.0-rc0 (see the opkg NEWS file).
[Thomas: add missing wchar dependency inherited from libarchive.]
Signed-off-by: Vanya Sergeev <vsergeev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is not needed since BR2_ENABLE_DEBUG does not set this flag
anymore.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is not needed since BR2_ENABLE_DEBUG does not set this flag
anymore.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adding this flag when BR2_ENABLE_DEBUG is activated make several
packages to produce binaries that do not work as expected (e.g., dhcp,
lame, nano). Moreover, the help message of BR2_ENABLE_DEBUG does not
say it is adding this flag. It is supposed to build packages with
debugging symbols enabled. So, let it do that only.
* package/Makefile.in: Do not add --{enable,disable}-debug flags.
* package/pkg-autotools.mk: Remove ENABLE_DEBUG as it is not set
anymore.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop upstream patches #1 and #3. Drop the no longer needed patch #2.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Re-enable parallel builds, it doesn't seem to be affected by the issue
worked around in 5a8c7934 any more.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use the "-s" option to reduce scons output when it is a silent build.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump ccache to minor version 3.2.2.
Also changed download URL to https.
Signed-off-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
uClibc-ng has the required functionality for samba 4.2.x without the
need for any special tricks.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Follow the upstream EOL cycle and mark 3.19 as deprecated for 2015.08.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2015-3991 - denial-of-service and potential remote code execution
vulnerability triggered by IKEv1/IKEv2 messages that contain payloads
for the respective other IKE version.
other IKE version
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2015-3202 - fix exec environment for mount and umount.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2015-3808 CVE-2015-3809 - The LBMR dissector could go into an
infinite loop.
CVE-2015-3811 - The WCP dissector could crash while decompressing data.
CVE-2015-3812 - The X11 dissector could leak memory.
CVE-2015-3813 - The packet reassembly code could leak memory.
CVE-2015-3814 - The IEEE 802.11 dissector could go into an infinite
loop.
CVE-2015-3815 - The Android Logcat file parser could crash.
Patch upstream so drop and disable autoreconf.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 3afbc4f3 (conntrack-tools: uses dlopen(), not available on static
builds) adjusted the dependencies for the comment, but forgot to update the
comment itself.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building ncurses 5.9 with GCC 5.x fails with a syntax error, caused by
earlier preprocessing. This failure is more likely when building for
host (e.g. host-ncurses) that recently updated to GCC 5.x.
This patch is taken from the following link (more information is also
available here):
https://groups.google.com/forum/#!topic/sage-trac/U31shviuqzk
Signed-off-by: Doug Kehn <rdkehn@yahoo.com>
Acked-by: Jaap Crezee <jaap@jcz.nl>
Tested-by: Jaap Crezee <jaap@jcz.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Python setup.py has a function called add_gcc_paths(), which
executes gcc -E -v to get the list of header paths searched by
gcc. However, the logic of setup.py is only valid with the normal
english output of gcc: it doesn't work if a non-english locale is
set. This causes setup.py to not find certain headers (such as zlib.h)
and therefore disabling the build of such extensions.
Reported-by: Bruno Coudoin <bruno.coudoin@gcompris.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Python setup.py has a function called add_gcc_paths(), which
executes gcc -E -v to get the list of header paths searched by
gcc. However, the logic of setup.py is only valid with the normal
english output of gcc: it doesn't work if a non-english locale is
set. This causes setup.py to not find certain headers (such as zlib.h)
and therefore disabling the build of such extensions.
Reported-by: Bruno Coudoin <bruno.coudoin@gcompris.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/7ed/7ed85071bc06b4806e90b278a0736ea70c01b456/
Upmpdcli forgets to take the dependencies of libupnpp into consideration,
breaking static linking, so help it.
Libupnpp unfortunately doesn't provide a .pc file, so manually handle its
dependencies here.
The build system doesn't expand LIBS from the configure step, so manually
pass it to make.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following commit 95a572282e (pkg-infra: move the git download helper to a
script, 2014-07-02), move the comment describing the shallow clone trickery as
well. Merge this comment with the existing helper comment that was added in
7e40a1103a (support/download: convert git to use the wrapper, 2014-08-03).
Rename $($(PKG)_DL_VERSION) to ${cset} to match the helper code context.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When linking statically, the order of libraries on the linker command
line is important, and sconeserver got it wrong.
Also, sconeserver does not use pkg-config, so it misses the private
libs of -lcrypto, which is linking with -lz.
Fix that:
- add a patch to configure.in to fix the order of libraries;
- forcibly pass -lz when linking statically with openssl.
Note: we were already reconfiguring sconeserver, because it comes from
the github repository.
Fixes:
http://autobuild.buildroot.org/results/403/403eac974ecdaacdb66b8241fbdcf19ec5e07480
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop the --disable-optimization option, which makes the libgcrypt configure
remove buildroot's optimization setting passed in from CFLAGS.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gptfdisk cgdisk select nucurses wchar support which is disabled
on bfin with FLAT binary format.
Add the ncurses's reverse dependency to gptfdisk.
Fixes:
http://autobuild.buildroot.net/results/ce3/ce35c072f0b7c3a7a1918cb865a2eecbba8a1b23/
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2015-0847 nbd-server denial of service due to unsafe signal handlers
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since a7134ce674 (libstrophe: bump version), the package does in fact build
and install a shared library, so ensure it also ends up in target so it can
be found at runtime.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libelementary sources include dlfcn.h header when HAVE_FORK symbol is defined;
this is always the case because efl already depends on BR2_USE_MMU.
Fixes:
http://autobuild.buildroot.org/results/07c/07c97918dab24215f5c5130a9cd2788adca0a27d/
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The pcre library bundled in php is not configurable through the usual
--enable/disable options, but wants to be thread-safe by default, so it
wants to use pthreads (uncludes pthread.h and uses pthread_* functions).
So, just override the default configuration to explicitly require the
bundled pcre library be single-threaded when we have no thread and are
not using the external pcre library.
Fixes:
http://autobuild.buildroot.org/results/f50/f50f4e569466ad74e49a3eac9ea2e6cfc4dd30e3/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/c7d/c7d48554d76e39cbdf715721ae51e3516a99f97e/
We're explicitly linking against libintl/libiconv if enabled when linking
statically, but weren't ensuring that those libraries had already been built
before gptfdisk leading to linker issues.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.org/results/04a/04a1c48d484debd7894fd32997ed50d3a0110b93/
Due to weird constructs in the Makefiles, lanplus is always built, even
when explicitly disabled with --disable-lanplus .
So, add a patch to enforce disabling lanplus. We're doing an at-minima
patch just for the upcoming Buildroot release, and to avoid diverging
too far from upstream...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 5504039c4e (neardal: fix readline/libedit detection with static
linking) added the output of pkg-config to the LIBS shell variable without
adding quotes around it, breaking the logic if the output would ever consist
of more than 1 word.
Now, pkg-config --libs ncurses currently only outputs '-lncurses', so
nothing is really broken (for now atleast), but lets add the quotes before
it does or the syntax gets copied somewhere else where it does.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adds functionality to the kconfig infrastructure to merge additional
configuration fragment files to the main configuration file of
kconfig packages, using support/kconfig/merge_config.sh
Typical use-case is when you want your configuration to be
kept in sync with an upstream (def)config file, but do require
some minor local modifications.
Disables -update-config and -update-defconfig targets when
fragment files are set.
[Thomas: take into account comments made by Arnout:
- Minor fixes in the documentation changes
- Add @ before the tests done in the $(1)-update-config and
$(1)-update-defconfig targets.]
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Gergely Imreh <imrehg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise we can end up with various linker issues (E.G. linking shared
against libc for a static build, ..).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The (handwritten) configure script uses pkg-config, so ensure it is
available.
With this in place XT and IPT_LIB_DIR detection works correctly, so drop the
overrides.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use some text from the flashrom website to provide a better Config.in
help text about flashrom.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version adds support for new Intel SoC (e.g. BayTrail) and
spi over usb devices such as pickit2 and ftdi usb-spi.
[Thomas:
- add missing Config.in comment about the thread dependency
- remove 'Requires PCIUtils libraries' from the Config.in help text,
since flashrom now requires more than PCIUtils library, and we
typically don't document such dependencies in Config.in help
texts.]
Signed-off-by: Florent Valette <florent.valette@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch fixes an error during source-check.
Thanks to Thomas for the hint:
http://article.gmane.org/gmane.comp.lib.uclibc.buildroot/116183
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libuuid is picked up by apr when present:
Checking for OS UUID Support...
checking uuid/uuid.h usability... yes
checking uuid/uuid.h presence... yes
checking for uuid/uuid.h... yes
checking for library containing uuid_generate... -luuid
checking for uuid_generate... yes
checking for os uuid usability... yes
$ output/host/usr/bin/i586-buildroot-linux-uclibc-readelf -a output/target/usr/lib/libapr-1.so | grep libuuid
0x00000001 (NEEDED) Shared library: [libuuid.so.1]
[Thomas: move the added chunk a bit further down, and use += instead
of =.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since 1b54fbc925 (qt5base: fix postgresql plugin compile, 2015-02-19)
QT5BASE_CONFIGURE_ENV is never set. Remove it.
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though BR2_PACKAGE_LIBSIGROKCXX is selected, the C++
binding is disabled due to lack of C++11 support in the toolchain.
Configure output:
Enabled language bindings:
- C++............................. no (C++11 compiler required)
So disable libsigrok C++ binding and pulseview for CS powerpc toolchains.
Fixes:
http://autobuild.buildroot.net/results/737/737453011ac0d13ab197258171ffa0f81bc4c368/
[Thomas: use 'depends on !foo && !bar' instead of 'depends on !(foo ||
bar)', seems it looks more logical in this situation.]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add PHP_VERSION_MAJOR variable to php.mk for use by other packages.
E.g. to install the Ioncube loader binary, it is necessary to
know the PHP major version.
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
php-fpm installs a sample status page to $datadir/fpm/status.html
It is not of any use in that directory, so remove it from target.
If someone wants to use it, he can copy it to webroot manually.
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a line to load the opcache extension in php.ini, at the
bottom of the "dynamic extensions" section.
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
aclocal.m4 gets regenerated from acinclude.m4, so patch the last.
Fixes "Extensions are not supported on this platform" error when
loading any external (zend) extension in php.ini.
Was caused by 0001-ditch-unset.patch not being applied to the
correct file, and our ac_cv_func_dlopen=yes env setting being unset.
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#8121
External PHP modules like the OPcache may live in
/usr/lib/php/extensions, so only delete /usr/lib/php/build
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
xtensa gcc is not able to generate correct code when compiling with -O0
enabled by --enable-debug. Instead of disabling package build it with
--disable-debug.
Fixes:
http://autobuild.buildroot.net/results/5d17055027055ffd33fcd28b208130afb26343c9/
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This drops architecture-specific ABI flags, which may be important.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make sure that ntp installs after busybox so that it overrides the busybox
provided ntpd applet.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The comment message shows up if the toolchain has threads instead
of not having threads.
Signed-off-by: Florent Valette <florent.valette@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gpsd always tries to build a shared library, so make it 'depends on
!BR2_STATIC_LIBS'. We also propagate this to the only gpsd reverse
dependency, the location support of sconeserver. While we're at it, we
add a comment indicating the dependencies of this location support,
which was missing.
Fixes:
http://autobuild.buildroot.org/results/f52/f5261a0933f9b5449d1f4e5cab1bb02e7154e683/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 83e29f2656 "gst1-plugins-bad: bump
version" (from 1.2.4 to 1.4.1) removed the configuration options for the
cdaudio and eglglessink plugins as a consequence of their removal in
1.3.1. However, that commit did not remove the corresponding make rules,
so remove them now.
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
uCLibc-ng needs to backport the uClibc commit
de6561f6669308e5d2297589b39a217d4c14df1c to add
PT_GETSIGINFO definition.
This commit is already merged in uClibc-snapshot used by
Buildroot's toolchains for xtensa.
For now, disable ptrace with xtensa uClibc-ng toolchains.
Thanks to Gergely Imreh for the initial investigation and
patch:
http://patchwork.ozlabs.org/patch/470073/
Fixes:
http://autobuild.buildroot.net/results/77b/77b82e5b437d0778b3f6a3813f2c0a5c39b52db9
Reported-by: Gergely Imreh <imrehg@gmail.com>
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building webkit with the SuperH Sourcery toolchain fails with an
assertion in binutils, so let's not allow to select webkit with this
toolchain. We do not need to worry about reverse dependencies, since
we use the existing BR2_PACKAGE_QT_ARCH_SUPPORTS_WEBKIT symbol to add
this new dependency.
Fixes:
http://autobuild.buildroot.net/results/508cdeb67f272b61209f331ab7b990cb56f30817/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This change fixes build of packages depending on opencv and using
pkg-config to get the opencv LDFLAGS, which were wrongly ordered for
static build and included absolute path pointing to the host system
libraries instead of the sysroot ones.
This patch fixes build issues with gst1-plugins-bad and vlc.
This change introduce and new patch to opencv, which is already merged
upstream [1].
Fixes:
http://autobuild.buildroot.net/results/c70/c70f793c7c3b380428d6e2e622a90805cffc4dd1/
... and many others
[1] eceada586b
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fix:
http://autobuild.buildroot.net/results/ce8/ce89ad1ca6aec9f7bb5549301bf4c0dcba9e0e37/
qtwebkit includes qscript headers.
For packages like python-pyqt if webkit is available but not qscript, the
compilation fails with :
buildroot/output/build/python-pyqt-4.11.3/sip/QtWebKit/qwebframe.sip:79:0:
../../../host/usr/i686-buildroot-linux-gnu/sysroot/usr/include/QtWebKit/qwebframe.h:28:36:
fatal error: QtScript/qscriptengine.h: No such file or directory
This problem is not seen with Qt compilation because some relative include
directly from sources are added.
[Peter: also adjust comment]
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
PyQt4 provides two version for some py files: one for python2.x and one for
python3.x. This two versions are installed in TARGET_DIR.
After installing files, python is used to generate all .pyc files, but fails
like :
class ProxyBase(metaclass=ProxyMetaclass):
^
SyntaxError: invalid syntax
This is not a package build failure and this fix is only cosmetic.
This patch suppress directory for not targeted python version.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With NIOS2 toolchain, heirloom-mailx fail to build
due to missing -fPIC when linking with its own getopt.
Since static build for heirloom-mailx is disabled,
always pass -fPIC in CFLAGS.
Fixes:
http://autobuild.buildroot.net/results/333/33346f4555ed403bab7b739dd5d47814efa8eb4c
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
lua-periphery currently clones and builds the c-periphery library by
itself. This causes two problems:
1/ It does not integrate properly with the download infrastructure of
Buildroot, making offline builds impossible since not the entire
source code is downloaded by Buildroot.
2/ It does not use the latest version of c-periphery, which has some
fixes contributed by Vicente to fix c-periphery on MIPS.
This commit fixes:
http://autobuild.buildroot.org/results/0ad/0ad656970b3cbc84b5531b28155ba2f747715fe3/
[Peter: fix minor typo in patch 0001 description]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package is needed as a dependency of lua-periphery. Currently,
c-periphery is automatically cloned by lua-periphery, which causes two
problems:
1/ It does not integrate properly with the download infrastructure of
Buildroot, making offline builds impossible since not the entire
source code is downloaded by Buildroot.
2/ It does not use the latest version of c-periphery, which has some
fixes contributed by Vicente to fix c-periphery on MIPS.
Introducing this package is needed as part of the fix for the
following build failure:
http://autobuild.buildroot.org/results/0ad/0ad656970b3cbc84b5531b28155ba2f747715fe3/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make sure we take into account libgpg-error when linking against
libgcrypt, by adding a patch against xmlstarlet configure.ac. The
handling of static libraries is clearly horrible in this configure.ac
script, using pkg-config would be a lot better, but it's also a lot
more work.
Fixes:
http://autobuild.buildroot.org/results/931/931dede013d94f88fcb5185dac494775603063ec/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 95f9a5c3df fixed the static
linking issue of uboot-tools mkimage against OpenSSL, but in the
process broke the dynamic linking case. This commit adjusts the
uboot-tools patch to make sure both static and dynamic linking work.
An updated version of the patch has been submitted upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes the line endings of the tinyxml2 patches added in
commits 22f5be171c and
0fa452df18. Thanks to Romain Naour for
providing the correct version of the patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 55c83179c4.
Now that binutils bug with --gc-section is fixed this workaroud is no
longer needed.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
elf_xtensa_gc_sweep_hook doesn't correctly unreference symbols that were
made local, that results in link failure with the following message:
BFD (GNU Binutils) 2.24 internal error, aborting at elf32-xtensa.c line
3372 in elf_xtensa_finish_dynamic_sections
elf_xtensa_gc_sweep_hook determines symbol reference type (PLT or GOT) by
relocation type. Relocation types are not changed when symbol becomes
local, but its PLT references are added to GOT references and
plt.refcount is set to 0. Such symbol cannot be unreferences in the
elf_xtensa_gc_sweep_hook and its extra references make calculated GOT
relocations section size not match number of GOT relocations.
Fix it by treating PLT reference as GOT reference when plt.refcount is
not positive.
Fixes:
http://autobuild.buildroot.net/results/3e2e24f697e26c93d4d95782b1cb7799fa620a7a/http://autobuild.buildroot.org/results/97d4c96d6f6cdc1ed4007456f4ab70be9dfa41b5/
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
postgresql currently does not build in BR2_STATIC_LIBS=y
configurations, and since there is little interest in using such a big
piece of software in statically linked configuration, this commit
makes postgresql depends on !BR2_STATIC_LIBS.
Fixes:
http://autobuild.buildroot.net/results/f9ed96d22e91cdba9ad92c4d4ea52e422bf1f1c9/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The acl and attr packages are using autoconf and libtool, but not
automake, which causes all sort of troubles. Some of them are already
worked around in acl.mk and attr.mk, but there is another one: the
libdir variable in the .la file remains empty, which causes libtool to
sometimes be confused about where the acl and attr libraries are
installed.
This was causing build issues with libarchive, but interestingly only
in situations where we had zlib *and* libxml2 also part of the build,
which maybe affects how libtool in libarchive behaves since libarchive
can use zlib and libxml2 as optional dependencies.
So what this patch does is to mungle the libattr.la and libacl.la
files to make sure they contain the right libdir values. Yocto is
doing exactly the same thing.
Upstream attr and acl have been converted fully to automake, so
hopefully the upcoming upstream release will allow us to get rid of
those hacks, but in the mean time, it seems to be the most appropriate
solution.
Here is a minimal defconfig that exhibits the problem, and which
allows to show that this patch fixes it:
BR2_bfin=y
BR2_BINFMT_FLAT=y
BR2_COMPILER_PARANOID_UNSAFE_PATH=y
BR2_INIT_NONE=y
BR2_PACKAGE_LIBARCHIVE=y
BR2_PACKAGE_LIBARCHIVE_BSDCPIO=y
BR2_PACKAGE_ZLIB=y
BR2_PACKAGE_LIBXML2=y
BR2_PACKAGE_ACL=y
Fixes:
http://autobuild.buildroot.org/results/e96/e96c8bec1039d9fe8c6c51fd48b6be0dc8be51d7/
(and many, many similar build failures)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The newly added patch makes sure that gold linker functionality is not
used when doing host builds, since qt5 only tests the availability of
this feature with the target compiler.
Fixes:
http://autobuild.buildroot.net/results/f403a76ac0abbf8488373c0dffb4487f5d98c55d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There are currently two patches with the 0002 sequence number, which
isn't great. Rename one of them to use the 0003 sequence number.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mosquitto triggers the infamous _gp issue with the NIOS 2 toolchains,
so let's not allow mosquitto in such situations.
Fixes:
http://autobuild.buildroot.net/results/b853369452115b0c6f32c6c960af2dbdf71a74af/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The build of boost-log with a uClibc toolchain on PowerPC fails with
some weird C++ issues. Since nobody ever looked into this problem,
let's "fix" the autobuilder issue by not allowing to select boost-log
in such a situation.
Fixes:
http://autobuild.buildroot.net/results/13b43105caf4d3952de70030b51f8d96cf6604ee/
(and many, many similar build failures)
[Peter: also add dependency to comment]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
-q option is missing in BOOST_INSTALL_STAGING_CMDS,
so the build doesn't stop on the first error.
This help to see what happened.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
http://autobuild.buildroot.net/results/d9ec39dc5829aac1b25bfea7484458fcebd68412/
add cstdlib header to ensure EXIT_FAILURE presence
Using some cross-compiling toolchains, EXIT_FAILURE is not always
properly defined without this inclusion.
Patch is upstream:
https://github.com/zeromq/zmqpp/pull/109
[Thomas: use a patch formatted with git format-patch, rather than the
output of 'git show'.]
Signed-off-by: Lionel Orry <lionel.orry@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CMake complains about Policy CMP0037 that reserve some
target name such "test".
So remove the warning by renaming test to xmltest.
Backport an upstream patch:
0b2c22bd46be95b08f234b8b4cb262f72ab3f0e8
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current NIOS 2 toolchains are not capable of building Boost, so
let's disable it and its reverse dependencies. Even though it's not
strictly an architecture dependency, we use the <pkg>_ARCH_SUPPORTS
paradigm for this dependency, since it simplifies a lot handling all
boost reverse dependencies, and is anyway quite similar to an
architecture dependency since we don't display a comment about this
dependency.
Fixes:
http://autobuild.buildroot.net/results/e119b1ef55c546e0d0598b85c46ceefa5c43d5a6/
[Peter: also update mpd comment]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 884af65fd5. Thanks
to the change of the installation path of host-autoconf-archive
macros, host-ola will no longer see them when doing its autoreconf, so
the patch that was added by the commit being reverted here is no
longer needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host-autoconf-archive package was added to provide the necessary
autoconf macros for the libsigrok package, and later also used for the
thrift package.
However, it installs its autoconf macro in
$(HOST_DIR)/usr/share/aclocal, which is part of the include directory
of autoconf macros used for all autoreconf invocations. Unfortunately,
using those macros for all packages is causing a number of
regressions: one on host-ola fixed in commit
884af65fd5, and one in snmpp. Those
packages are autoreconf'ed, but if they are autoreconf'ed with the
autoconf-archive macros installed, they no longer work.
To solve this problem, this commit implements a simple solution that
makes using host-autoconf-archive macros an opt-in mechanism. To
achieve this, the autoconf-archive package is modified to install its
macros in a special directory, and only the packages that really want
to use those macros will have to pass a -I flag pointing to this
directory in their <pkg>_AUTORECONF_OPTS variable.
Fixes:
http://autobuild.buildroot.org/results/712/712c8083b9eeafa41b60790961028c40b28f59ad/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is the most recent version of the package.
Also it fixes static builds (see
http://autobuild.buildroot.net/results/1cc/1ccf0829c13896c000aed1956155a34844207b2f)
with commit http://sourceforge.net/p/arma/code/3569/ that was made right
before 4.400.0 release.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patches touching configure.ac were dropped in 9d9bbf9b79 (rsyslog: bump
to version 8.8.0, 2015-02-25). Remove autoreconf as well.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
--disable-install-libiberty configure option is broken
in gcc 4.8.x, so libiberty.a is always installed in HOST_DIR.
This library broke the host-gdb build due to a fpic/fPIC issue.
Since binutils use a copy of gcc's libiberty sources, it's
affected by the same bug.
binutils-arc-2014.11 which is based on 2.23 branch doesn't have
the PR56780 fixies, so backport them.
Fixes:
http://autobuild.buildroot.net/results/ca4/ca45297aa0ffbc9062ed92dc7ac070b0b33001de/
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Contrary to what commit f5866484f (libnftnl: exclude for CS PPC toolchains)
stated, a missing sa_family_t definition IS specific to the kernel headers
version, and not something particular to the CS toolchains, so instead
require 3.1+ headers.
The specific kernel change fixing the headers is:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=6602a4baf4d1a73cc
The only reverse dependency of libnftnl (nftables) already needs 3.4+, so
this dependency doesn't need to be propagated.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
commit dfbfa6ef (dhcpcd: blacklist Sourcery PowerPC toolchains) blacklisted
specific toolchains, but the issue is actually that the kernel headers
before 3.1 didn't define sa_family_t, so instead require 3.1+ headers.
The specific kernel change fixing the headers is:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=6602a4baf4d1a73cc
The only reverse dependency of dhcpcd (network-manager) already needs 3.7+,
so this dependency doesn't need to be propagated.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
