Currently, the manual uses the last modification date and time of
manual.txt in the generated manual.
This is confusing, especially for long-checked-out repositories where
the top-level manual.txt has not changed since the check out. Moreover,
the manual explicitly states 'generated on', which is confusing at best.
Use the current date and time instead.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If U-Boot patches are nested under BR2_GLOBAL_PATCH_DIR, then the
subdirectory should be called "uboot", and not "u-boot".
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Apache licenses are referred to in a variety of ways; standardise these,
choosing a form which does not contain whitespace.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
PDF files can not be easily embedded in other documents (eg. ODT, or HTML).
Add support for generating PNG graphs, by setting the GRAPH_OUT=pdf|png on
the command line:
make GRAPH_OUT=png graph-build graph-depends
The default is still to generate PDF graphs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Generate the build-time graphs by calling:
make graph-build
This generates the graphs in $(O)/graphs/
It is possible to use the alternate color-scheme by setting the variable
GRAPH_ALT=1 on the command line:
make GRAPH_ALT=1 graph-build
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Updating the documentation to reflect that multiple directories can
now be specified for BR2_GLOBAL_PATCH_DIR. Along with giving an
example use case of how to use multiple global patch directories.
[Thomas: fix minor typo mentionned by Thomas De Schampheleire.]
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Peter: fix s/BUILD_TYPE/SETUP_TYPE/ typo in manual as noted by Samuel]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Shawn Landden <shawn@churchofgit.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To make it clear to the user that these options are external to Buildroot
and no support is provided by the Buildroot community.
With this, there's no need to recommend people to their options inside
a menu, so remove that from the documentation.
Kconfig nicely allows us to hide the menu completely if BR2_EXTERNAL isn't
used, so make use of that to not confuse people. It would be nice if we
could add some help text to explain the BR2_EXTERNAL stuff as well, but
that isn't supported on menus :/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit updates the manual to add details on how to use the
BR2_EXTERNAL feature.
[Peter: minor tweaks, fix asciidoc tag as pointed out by Samuel]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Acked-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit introduces the BR2_EXTERNAL environment variable, which
will allow to keep Buildroot customization (board-specific
configuration files or root filesystem overlays, package Config.in and
makefiles, as well as defconfigs) outside of the Buildroot tree.
This commit only introduces the variable itself, and ensures that it
is available within Config.in options. This allows us to use
$BR2_EXTERNAL in a 'source' statement in Config.in.
Following patches extend the usage of BR2_EXTERNAL to other areas
(packages and defconfigs).
In details, this commit:
* Introduces the BR2_EXTERNAL Kconfig option. This option has no
prompt, and is therefore not visible to the user and also not
stored in the .config file. It is automatically set to the value of
the BR2_EXTERNAL environment variable. The only purpose of this
BR2_EXTERNAL Kconfig option is to allow $BR2_EXTERNAL to be
properly expanded when used inside Kconfig source statements.
* Calculates the BR2_EXTERNAL value to use. If passed on the command
line, then this value is taken in priority, and saved to a
.br-external hidden file in the output directory. If not passed on
the command line, then we read the .br-external file from the
output directory. This allows the user to not pass the BR2_EXTERNAL
value at each make invocation. If no BR2_EXTERNAL value is passed,
we define it to support/dummy-external, so that the kconfig code
finds an existing $(BR2_EXTERNAL)/package/Config.in file to
include.
* Passes the BR2_EXTERNAL into the *config environment, so that its
value is found when parsing/evaluating Config.in files and .config
values.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Tested-by: "Samuel Martin" <s.martin49@gmail.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: splitted from Mischa original commit]
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Python saves a pre-compiled support/scripts/kconfiglib.pyc file
side-to-side with the corresponding .py file.
This does not work if the Buildroot source tree is read-only (but
this is not an error for Python, which keep going OK).
But this may cause issues for out-of-tree builds in case the same
Buildroot source tree is shared by many builds.
Also, 'make clean' currently does not clean this file, and out-of-tree
builds can remove it either, at the risk of causing issues for other
out-of-tree builds running at the same time.
Just tell Python not to generate .pyc files:
- call the script via python, don't use the sha-bang
- thus, make the script non-executable, and remove the sha-bang
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: keep clean comment as pointed out by Arnout]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current TOC level is set to 4, which does not mean 'a 4-level deep TOC',
but really means 'a TOC deep to the 4th level', with the first level being
level 0, which means we have:
12. Appendix
12.1. Makedev syntax documentation
12.2. Makeuser syntax documentation
12.3. Partition table layout description syntax
12.3.1. The global section
Properties for the global section
Which a bit too much. And yet, the fifth level is not shown, since we
don't have any! :-/
Limit the depth of the TOC to three levels, which is just enough to be
usefull, yet not cluttered by low-level titles.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Offer a little bit more visibility to the companies who sponsored us,
either by sponsoring the developer days, or development
boards. Hopefully this will encourage other companies to do the same :)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: drop 'the' before FOSDEM]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Allow user to supply their own step-hooks by passing a variable
on the make command-line:
make BR2_INSTRUMENTATION_SCRIPTS=/path/to/my/script
This can be useful to run site-specific actions at each step of the
build process, such as logging installed, removed or modified files,
do sanity checks on installed files...
It is possible to call more than one script, by passing a space-separated
lists of scripts to call.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also export BUILD_DIR for post-{build,images} hooks, so they do have
a place to store generated files.
Note: this will be more einteresting for the instrumentation of steps,
to come in a later patch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building host-bison needs perl 5.8.7+, as it uses the "-f" option
for site customization scripts. This feature was added in 5.8.7.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Split out the information on hooks to a separate section (and source file).
Not only because the hooks are useful for all infrastructures (and thus
don't really fit specifically in the generic infrastructure section), but
also for clarity when the info on hooks will be expanded in later patches.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
One of the use cases is for the 'local packages' to restore
the SCM info. Some packages use this information to generate
version info during build time. In this case, the local package
can have this hook to restore it by symbolic link for example.
[Thomas: update commit title]
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Mention all supported C libraries by the internal Buildroot toolchain
backend.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: Added ThomasDS Acked-by, which was given on an earlier
version of the same patch.]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
The output extension and the generation messages refer to 'text', but the make
target was confusingly 'txt'. This patch changes the make target for
consistency.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To generate the manual, you need a few tools. If these are not present,
pretty cryptic error messages are given.
This patch adds a simple check for these dependencies, before attempting to
build the manual.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
usage:
# set cache limit size
make CCACHE_OPTIONS="--max-size=5G" ccache-options
# zero statistics counters
make CCACHE_OPTIONS="--zero-stats" ccache-options
[Peter: drop the redundant ifeq]
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
$(BUILD_DIR) is a nice place to put files generated during the build.
With the advent of user-supplied step-hooks, they may want to store
some information on the build.
Export BUILD_DIR to that effect; update manual accordingly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adding more documentaiton based on discussion from the mailing list
in regards the buildroot review process and how patchworks can be
used to pull in patches for testing purposes.
Mailing list discussion:
http://lists.busybox.net/pipermail/buildroot/2013-September/078170.html
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
