Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When a package A depends on config option B and toolchain option C, then
the comment that is given when C is not fulfilled should also depend on B.
For example:
config BR2_PACKAGE_A
depends on BR2_B
depends on BR2_LARGEFILE
depends on BR2_WCHAR
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
This comment should actually be:
comment "A needs a toolchain w/ largefile, wchar"
depends on BR2_B
depends on !BR2_LARGEFILE || !BR2_WCHAR
or if possible (typically when B is a package config option declared in that
same Config.in file):
if BR2_B
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
[other config options depending on B]
endif
Otherwise, the comment would be visible even though the other dependencies
are not met.
This patch adds such missing dependencies, and changes existing such
dependencies from
depends on BR2_BASE_DEP && !BR2_TOOLCHAIN_USES_GLIBC
to
depends on BR2_BASE_DEP
depends on !BR2_TOOLCHAIN_USES_GLIBC
so that (positive) base dependencies are separate from the (negative)
toolchain dependencies. This strategy makes it easier to write such comments
(because one can simply copy the base dependency from the actual package
config option), but also avoids complex and long boolean expressions.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(untested)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_PACKAGE_QT_JAVASCRIPTCORE option was available to force the
activation or disabling of the JIT compiler in the Qt Javascript
interpreter. However, the JIT compiler is not available for all
architectures, so forcing its activation does not always
work. Moreover, Qt knows by itself for which architectures JIT support
is possible, and will automatically enable it if possible.
Therefore, this option was in fact useless, and causing build problems
when enabled on architectures for which the JIT support was not
available. This commit removes this option and there is no
replacement: Qt will enable JIT at compile time when possible.
Fixes:
http://autobuild.buildroot.org/results/aae/aaeb82753b7654eeca679ded5d0211ceebda3ea2/build-end.loghttp://autobuild.buildroot.org/results/367/3670e4f03ff0ce114c90bd7139243d82c427b52a/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
WebKit has some architecture specific support, and therefore is not
necessarily available for all architectures. Make sure the Qt WebKit
option cannot be selected on those architectures that are not
supported.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch lines up the comments in Config.in files that clarify which
toolchain options the package depends on.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Qt translation files are currently created and moved under
$(STAGING_DIR)/usr/translations but not installed on the target.
This patch defines the translations directory to
/usr/share/qt/translations and defines a QT_INSTALL_TARGET_TRANSLATIONS
macro to deploy them from the staging directory to the target directory.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Use the following to test:
/usr/share/qt/examples/opengl/hellogl_es2/hellogl_es2 -qws -display powervr
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Sundareson, Prabindh <prabu@ti.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Sinan Akpolat <sinan@linkas.com.tr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The mysql_client package is only available on architectures having a
MMU, so all packages that are selecting mysql_client should depend on
BR2_USE_MMU.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When selecting the Qt declarative module, all the QML imports was
built and installed to staging, but never installed to the target.
Signed-off-by: Daniel Nyström <daniel.nystrom@timeterminal.se>
Acked-by: Alexander Lukichev <alexander.lukichev@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Precompiled header implementation is buggy in current Qt as described at
http://comments.gmane.org/gmane.comp.lib.qt.devel/5933.
The only known workaround is currently to add -no-pch to configure.
Fixes build failure terminating with error
compiling ../3rdparty/pixman/pixman-arm-neon-asm.S
cc1: fatal error: .pch/release-shared-emb-arm/QtGui: No such file or directory
compilation terminated.
such as:
http://autobuild.buildroot.net/results/648265012591280fa592a239f86ee39aec2d5fa6/build-end.log
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Finally get rid of all := used for variable definitions in packages,
as we suggest in our manual and during the review of new packages.
While I was at it, I also sometimes added a few missing new lines
between the header and the first variable definition.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Qt configure option for specifying a custom qconfig.h
file changed from -config to -qconfig. This makes the
corresponding change in qt.mk.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to solve
http://autobuild.buildroot.org/results/34f6843137efda20626af72714c110280ec577d7/build-end.log,
this patch makes the D-Bus package as well as all the packages that
select the D-Bus package 'depends on BR2_USE_MMU'.
In addition, for the specific case of gvfs, the missing
BR2_TOOLCHAIN_HAS_THREADS dependency is added (threads are required by
D-Bus, so they are also required by gvfs which selects D-Bus).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The problem has to do with const-correctness. This has been resolved
for various architectures, but not for the generic case.
Signed-off-by: Mischa Jonker <mischa.jonker@synopsys.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some parts of alsa-lib correctly use threads only when available, but
some other parts, especially certain PCM plugins, unconditionally
require threads. While it would certainly be possible to fix alsa-lib
to only use threads when available, it probably doesn't make much
sense, since on an embedded system that has audio, we are probably
powerful enough to enable thread support in the C library.
Fixes:
http://autobuild.buildroot.org/results/e14469be7f6171f4c8c0c09c8e32943819f7938b/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As can be seen on the build result at
http://autobuild.buildroot.org/results/20f1078ef7dc5f187b04c63ef70e8b43acf9bb3a/build-end.log,
D-Bus requires thread support in the toolchain.
This commit adjusts the Kconfig dependencies of D-Bus and all its
reverse dependencies to depend on thread support in the toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Qt configuration and installation process is a bit strange, and it
leads the .pc files to contain absolute paths to the staging
directory, while it should only contains paths relative to the staging
directory, because pkg-config already adds the path of the sysroot
automatically to the headers and libraries locations.
This allows the 'pkg-config --cflags' results for Qt libraries to be
correct.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The upstream URL for Buildroot packages is usually visible in the Config.in
file, not in comments in the Makefile.
Moreover, this URL does not point to the correct upstream project.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In fact, not only qt can install stuff in $(STAGING_DIR)/usr/mkspecs,
but also libraries that wish to integrate with qmake, such as
qwt. However, qmake and al. will look inside $(HOST_DIR)/usr/mkspecs,
so the easiest solution is to have a symbolic link between the two
directories, instead of copying things around.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#4297
Tweak qmake.conf to ensure our cross pkg-config is used, instead of
whatever is first in the path. In order to do this, tweak the
QT_QMAKE_SET to be able to handle variables which aren't prefixed with
QMAKE_.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thanks to the pkgparentdir and pkgname functions, we can rewrite the
GENTARGETS macro in a way that avoids the need for each package to
repeat its name and the directory in which it is present.
[Peter: pkgdir->pkgparentdir]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
