This initial support includes:
Linux 5.4
U-Boot 2020.01
Arm Trusted Firmware v2.2
Buildroot default packages.
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Disabled creation of u-boot.imx image as it fails, and is not required.
Final boot image is created from uboot binary and firmwares in post image
script board/freescale/common/imx/imx8-bootloader-prepare.sh
With the bump of the kernel to 4.19, the kernel configuration now needs
host-openssl to build.
Tested-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Laurent GAUTHIER <laurent.gauthier_1@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the kernel to 4.19, the kernel configuration needs host-openssl
to build.
Fixes:
scripts/extract-cert.c:21:10: fatal error: openssl/bio.h: No such file or directory
21 | #include <openssl/bio.h>
Signed-off-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the recent bump of the kernel to 4.19, the kernel configuration
now needs host-openssl to build.
Fixes:
scripts/extract-cert.c:21:10: fatal error: openssl/bio.h: No such file or directory
21 | #include <openssl/bio.h>
Signed-off-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog summary:
- Various fixes all over
- Updated LPDDR4 timings for i.MX8M
- Support of UUU recovery tool
- Added support for i.MX8MMini, i.MX8MNano
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The package imx-seco has been added in the defconfigs.
Signed-off-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Reviewed-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Let's clean up "boards/stmicroelectronics" directory a bit
to have everything in particular directories.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The board support package includes the following components:
- U-Boot 2020.01
- Linux 5.4.26
- Buildroot default packages
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It will be useful for the upcoming introducing stm32mp157a dk2 board.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Instead use generic genimage.sh script.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
optee-os needs host-python-pycrypto build for python3. The only way we can
force building host-python modules for python3 is to select python3 package
for the target.
Since we want to avoid adding more host-python3-<modules>
(host-python-pycrypto host-python-pyelftools), select python3 package
even if it's not used.
This problem will be fixed as soon as python2 is removed.
Fixes:
File "scripts/pem_to_pub_c.py", line 24, in main
from Crypto.PublicKey import RSA
ImportError: No module named 'Crypto'
https://gitlab.com/buildroot.org/buildroot/-/jobs/456818689
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to the fix for the base beaglebone defconfig in commit 38912a61be
(configs/beaglebone: kernel builds needs host-openssl), the qt5 variant uses
the same kernel, so also needs host-openssl.
Fixes:
914 scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
915 #include <openssl/bio.h>
https://gitlab.com/buildroot.org/buildroot/-/jobs/451176891
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 61a813339a (package/bluez_utils: drop package) removed
bluez-utils, but forgot to update the defconfigs. Fix them by changing to
bluez5-utils instead.
Fixes https://gitlab.com/buildroot.org/buildroot/-/jobs/451176867 and many
others.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The current Buildroot defconfigs for qemu_x86 and qemu_x86_64
instantiate a console on tty1, which appears on QEMU's
graphical window. Add a console on the serial port (ttyS0) to
be used later for gitlab testing.
This change is need since the script used for gitlab testing
needs to use a serial output with pexpect.
This change is similar to the one made for raspberrypi [1] to
handle HDMI and serial console:
This requires three changes:
1. have two 'console=' entries in the kernel command line: tty1,
then ttyS0;
2. change BR2_TARGET_GENERIC_GETTY_PORT to "console", so it starts
a getty on the last console= passed to the kernel, ttyS0;
3. add a new getty on tty1 to the generated inittab.
Step 2 is actually obtained by removing BR2_TARGET_GENERIC_GETTY_PORT
entirely from the defconfigs, since "console" is the default value.
Step 3 requires a post-build script since the Buildroot makefiles can
configure only one console.
Note: instead of simply adding a new getty on ttyS0 (which would
work) this patch actually changes BR2_TARGET_GENERIC_GETTY_PORT to
instantiate a console on UART, then adds back tty1 via
post-build.sh. This is done only to avoid the "GENERIC_SERIAL" comment
where we instantiate a console on QEMU graphical window, then
instantiate a really-serial console on another line.
The result is these two inittab lines:
console::respawn:/sbin/getty -L console 0 vt100 # GENERIC_SERIAL
tty1::respawn:/sbin/getty -L tty1 0 vt100 # QEMU graphical window
[1] 20878a1017
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The commit [1] added host-qemu package for each qemu defconfig
for gitlab runtime testing.
[1] 29e1cb8884
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Joel Stanley <joel@jms.id.au>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig was generated by savedefconfig but we usually
use a manually modified defconfig to add some comments for
Kconfig symbols.
No content change intended.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Joel Stanley <joel@jms.id.au>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now based on 4.19.97 (from 4.19.75).
Go back to sha1 version scheme instead of official tag (after
only two tag versions) to get an up-to-date kernel version
(as the offical last tag is for 4.19.94).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2020.01 version and kernel to 5.4.8.
Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2020.01 version and kernel to 5.4.8.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit ada40afb32 updated the raspberrypi*defconfigs to use
-add-miniuart-bt-overlay instead of -add-pi3-miniuart-bt-overlay.
Update raspberrypi0w_defconfig also.
Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now that the metadata_csum ext4 option is disabled, we no longer need
the U-Boot workaround.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The U-Boot ext4 write support doesn't work with the metadata_csum
option, and the stm32mp157 U-Boot defconfig uses an environment stored
in an ext4 filesystem, so we must create the ext4 root filesystem
without the metadata_csum option enabled.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
[Thomas: only disable the metadata_csum option, the 64bit and
dir_index options can be kept enabled]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Linux version is changed to 4.19.91 (the last version of 4.19).
Build- and runtime-tested for aarch64 and x86_64.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
[yann.morin.1998@free.fr: add the test report provided by Philipe on IRC]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Use support/scripts/genimage.sh, instead, which prevents duplicating
TARGET_DIR under ${BUILD_DIR}/genimage.tmp/root.
Use a post-build script to copy uEnv.txt to BINARIES_DIR, as made for
beaglebone.
Drop the post-image script.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
