It was a leftover from the copy-and-paste of the readme.txt file of its
almost twin sister BSH SMM S2 PRO.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Kernel is built without network support, so network utils are useless.
This has a positive impact on the size of busybox and xipImage, making
them smaller.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiegineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds the defconfig file needed to build u-boot, kernel
and rootfs for the Rock 5B. In addition it adds a kernel config
fragment file, which activates the needed ethernet driver support.
It also adds a readme and post image scripts, needed to generate an
sdcard.img file, which can be flashed on an SD card to boot the
Radxa Rock 5B.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
[yann.morin.1998@free.fr:
- drop custom version
- fix shellcheck in post-image script
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Most rpi defconfigs use dtb overlays, but not rpi0 / rpi2 - Making it harder
to use overlays on those boards as the genimage files have to be tweaked.
To fix this, create the rpi-firmware/overlays directory in the post-build
script if needed and unconditionally include it in the genimage files so
rpi0/rpi2 works consistently with the other variants.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch cleans up board/zynqmp shellcheck issues.
Signed-off-by: Neal Frager <neal.frager@amd.com>
[Peter: wrap long lines, use quotes around entire word]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch cleans up board/zynq shellcheck issues.
Signed-off-by: Neal Frager <neal.frager@amd.com>
[Peter: use ${} for variables, quotes around entire word]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ppc-mpc8544ds is the only qemu configuration that requires a kernel patch:
board/qemu/ppc-mpc8544ds/patches/linux/0001-powerpc-Fix-mcpu-options-for-SPE-only-compiler.patch
But this patch doesn't apply after a backport between v6.1.20 and v6.1.21
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=da0beae2449376326086e9f57468fd2b64736d2a
So the patch 0001-powerpc-Fix-mcpu-options-for-SPE-only-compiler.patch doesn't
seem required anymore.
Welcome to Buildroot
buildroot login: root
# uname -a
Linux buildroot 6.1.28 #1 Wed May 24 09:08:27 UTC 2023 ppc GNU/Linux
# cat /proc/cpuinfo
processor : 0
cpu : e500v2
clock : 400.000000MHz
revision : 3.0 (pvr 8021 0030)
bogomips : 800.00
timebase : 400000000
platform : MPC8544 DS
model : MPC8544DS
Memory : 128 MB
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/4306895282https://bugs.busybox.net/show_bug.cgi?id=15581
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Cc: Sebastian Weyer <sebastian.weyer@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Board support package includes the following components:
- mainline Linux kernel 5.15.108
- mainline U-Boot 2023.04
- default packages from buildroot
Note: There is a problem in u-boot display management. It should display
the ST microelectronics logo but "noise" is displayed (like when running
the command dd if=/dev/urandom of=/dev/fb0 in Linux). I also tried to
change version (even the first version in which this feature was
introduced), but without success. Despite this I decided not to disable
the video management configuration to remind us that it needs to be
fixed :).
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Link: https://www.st.com/en/evaluation-tools/32f769idiscovery.html
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Kernel is built without network support. It is useless to compile the
package and then remove it from rootfs.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
After booting Linux the userspace is unusable since every command issued,
that is a symlink to busybox, fails because of no free ram. So let's
disable IIO in linux.config to give some more ram to userspace.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The QEMU board's post-image script will glob through various
`readme.txt` files for an appropriate command line to use. Recent linter
changes [1] prevents this from happening, and results in the following
build error:
>>> Executing post-image script board/qemu/post-image.sh
sed: can't read board/qemu/*/readme.txt: No such file or directory
Reverting part of the shellcheck fixes for the README file arguments and
marking a linter exception.
[1]: b32d7c99c6
Signed-off-by: James Knight <james.d.knight@live.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: also reinstate plural to the variable name]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Virtually all PCs nowadays have a PCI bridge and PCI devices.
All framnebuffer options depend on CONFIG_FB, which default is not 'y',
so also enable that.
The overwhelming majority of PCs nowadays also come with an UEFI
bootloader, that configures a framebuffer usable in early boot, which
the kernel can reuse without needing any hardware-specific driver.
EDID allows retrieving the capabilities of the connected display,
especially the frequencies and so on, to properly drive the display.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr:
- drop cosmetic CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER=y
- rewrite commit log to explain all new options
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Last-minute changes to d9b244d8a3 (board/qemu: define start qemu
script outside of post-image script) were not tested before being
pushed, so they introduced a bug.
As Arnout put it:
[...] multiple expressions need a -e to interpret them as
expressions (now they're interpreted as file names).
Fixes: d9b244d8a3
Reported-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: James Knight <james.d.knight@live.com>
Provides the ability to use a host system's QEMU. While a Buildroot
generated QEMU should work for most cases, a developer may wish to use
the system's QEMU for options which may not have been configured in the
Buildroot's QEMU build (e.g. configuring a different display mode).
Signed-off-by: James Knight <james.d.knight@live.com>
[yann.morin.1998@free.fr:
- use false/true instead of 0/1
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Provides the ability to forward command line options directly to QEMU.
When invoking `start-qemu.sh`, users can forward arguments by adding a
double dash (`--`) into the argument set, and any trailing arguments
will be forwarded into QEMU. For example, `start-qemu.sh -- --help`.
The original implementation supported a "serial-only" command line
argument to help run in a non-graphical mode for some use cases. These
changes try to promote a newly added `--serial-only` argument to drive
this mode; that being said, a `serial-only` argument will still be
accepted for backwards compatibility.
Signed-off-by: James Knight <james.d.knight@live.com>
[yann.morin.1998@free.fr:
- drop the warning: unknown options cause 'exit 1' already, and any
leftover is explicitly for qemu.
- use false/true instead of 0/1
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The following moves the definition of the QEMU board's `start-qemu.sh`
helper script from being inlined in the post-image script into its own
file. This should, in theory, make it easier to maintain the script in
the future.
Signed-off-by: James Knight <james.d.knight@live.com>
[yann.morin.1998@free.fr:
- don't sub-shell in the script
- merge all 3 sed calls into one
- create dest file with the sed, don't cp first
- also substitute HOST_DIR
- fix shellcheck
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump U-Boot to version 2023.04 and remove the patch that has already
been upstreamed.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Linux Kernel 6.1 now being officially promoted to be a LTS, this
commit bump the kernel version of this defconfig to 6.1.14.
A Kernel config fragment "linux.fragment" is now needed as the kernel
no longer enable SBI v0.1 support and the earlycon RISC-V SBI in its
riscv arch defconfig. See [1] [2].
The Spike riscv-isa-sim was updated upstream accordingly [3].
In order to keep a smooth transition, this kernel config fragment
re-enable those options to make sure this kernel will work with
both old Spike versions (not including commit [3] like the v1.1.0
currently included in Buildroot), and newer versions. This commit
was also successfully tested with riscv-isa-sim at commit
0d1a48c0c0.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6f562570b9c5d6a3e30d87aec60a9d8f22a3203c
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=3938d5a2f9369d1ebd56320629fed395ce327e9c
[3] 191634d285
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The kernel config board/qemu/aarch64-sbsa/linux.config has never been in
use by qemu_aarch64_sbsa_defconfig, neither via
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE, nor via
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES.
test_edk2.py is using the kernel config
board/qemu/aarch64-sbsa/linux.config. However, storing a kernel config
that is not used by qemu_aarch64_sbsa_defconfig, in a directory that is
"owned" by qemu_aarch64_sbsa_defconfig, is bound to cause confusion.
Therefore, move the config file to a new subdirectory:
support/testing/tests/boot/test_edk2/
This is similar to how e.g. test_grub.py has a subdirectory:
support/testing/tests/boot/test_grub/
where it keeps the kernel config that is only used by test_grub.py.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ARM SBBR (Server Base Boot Requirements) defines SPCR (Serial Port
Console Redirection Table) as a mandatory ACPI table that specifies
the configuration of a serial console.
In the linux kernel, ARM developers have decided that consoles defined
by SPCR are always enabled when existing, see e.g.:
https://lore.kernel.org/linux-serial/20200430161438.17640-1-alpernebiyasak@gmail.com/T/
Specifying console=ttyAMA0 (which is a serial console) is thus
redundant for an ARM SBSA board. (It also blindly assumes that
the serial console is on ttyAMA0, which might not be true.)
Drop the explicit console=ttyAMA0 on the kernel command line,
such that the kernel can pick up the default console defined
by SPCR.
This is similar to how it is currently done for
board/aarch64-efi/grub.cfg.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Specifying /dev/sda2 is ambigious, and when booting my arm64 machine
this tries to mount the second partition of my ATA drive, instead of
the second partition of the USB-stick, simply because the ATA driver
is probed earlier than the USB controller driver.
To solve this problem, use PARTLABEL=root to specify the root filesystem.
This is similar to how it is currently done for board/aarch64-efi/grub.cfg
and board/qemu/aarch64-ebbr/grub.cfg.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump Linux kernel to v6.1.13 and increase the rootfs size accordingly.
- Bump the FVP in the readme to version 11.20 build 15 and update the
command line.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump Linux kernel version to 6.1.12.
- Bump U-Boot version to 2023.01 and rename config fragment to make it
clearer that it is not a complete config file.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump Linux kernel version to 6.1.12.
- Bump U-Boot version to 2023.01 and follow CONFIG_SYS_TEXT_BASE renaming.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a link to RVspace Documentation Center, which did not exist
when readme.txt was first submitted. It provides datasheet, quick
start, schematics, and so on.
Signed-off-by: Francois Dugast <francois.dugast.foss@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We're not using next branch so let's rename label linux-next to linux.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
During the last U-boot version bump it's not been noted that the TPL
was not prepended to SPL anymore preventing the board to boot, so
let's copy TPL to the image folder, prepend it to u-boot-spl-dtb.bin
and place it at offset 32KB, where RK3288 bootrom expects to find
it. Let's also place u-boot-dtb separated from SPL at offset 8M, where
the SPL expects it to find it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Starting from version 2021.10 only distro booting is supported, as
reported by commit ff8f277e9121 ("ti: am335x_evm: Switch to DISTRO_BOOT only").
The patch allows to update U-Boot to versions later than 2021.10.
Tested on beaglebone black.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If using BR2_LINUX_KERNEL_CUSTOM_DTS_PATH to copy .dts files from
buildroot into the linux tree, these .dts files are copied to
arch/arm64/boot. Unfortunately, the post-image.sh script expects to find
them in arch/arm64/boot/xilinx.
This patch does not require the xilinx/ prefix to be present when
symlinking the device-tree to system.dtb where u-boot expects to find
it.
It is effectively applying the below patch for zynqmp to versal as well:
https://patchwork.ozlabs.org/project/buildroot/patch/20230201195956.1758827-1-gsmecher@threespeedlogic.com/
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If using BR2_LINUX_KERNEL_CUSTOM_DTS_PATH to copy .dts files from
buildroot into the linux tree, these .dts files are copied to
arch/arm64/boot. Unfortunately, the post-image.sh script expects to find
them in arch/arm64/boot/xilinx.
This patch does not require the xilinx/ prefix to be present when
symlinking the device-tree to system.dtb where u-boot expects to find
it.
Signed-off-by: Graeme Smecher <gsmecher@threespeedlogic.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a defconfig to build a 32b ARMv7-A U-Boot based firmware implementing
the subset of UEFI defined by EBBR[1], as well as a Linux OS disk image
booting with UEFI, to run on Qemu.
The generated firmware binary can also be used to install or run another OS
supporting the EBBR specification.
[1]: https://github.com/ARM-software/ebbr
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds support for the BeagleBone Green Wireless to the
existing beaglebone_defconfig, by making sure the relevant Device Tree
is built and installed.
Signed-off-by: Ramon Crichlow <rcrichlow9000@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BSH SMM S2 PRO (SystemMaster S2 Pro) Board is an add-on board which
provide input and output interfaces to a dedicated carrier board. It is
designed mainly to provide graphical/video and connectivity interfaces
to the appliance.
Board support package includes the following components:
- mainline Linux kernel 6.1.6
- mainline U-Boot 2022-07
- Default packages from buildroot
https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/
Add Ariel D'Alessandro and Dario Binacchi as co-maintainer, we work
together on platform mainline
Build and tested using:
docker pull registry.gitlab.com/buildroot.org/buildroot/base:20220105.2314
Cc: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Heiko Thiery <heiko.thiery@gmail.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Tested-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BSH SMM S2 (SystemMaster S2) Board is an add-on board which provide
input and output interfaces to a dedicated carrier board. It is designed
mainly to provide graphical/video and connectivity interfaces to the
appliance.
Board support package includes the following components:
- mainline Linux kernel 6.1.6
- mainline U-Boot 2022-07
- default packages from buildroot
https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/
The smm s2 board is basically the same as the pro except it boots from
NAND instead of eMMC.
Co-authored-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The updated device tree is provided by Acme Systems:
https://www.acmesystems.it/compile_kernel_5_15
It is released under GPLv2 or later.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reduce the configs in the kria/uboot.fragment to only what is necessary.
These 4 configs are already included in the xilinx_zynqmp_virt_defconfig, so
it is redundant to include them in the kria/uboot.fragment file. Applying
this patch has zero impact on the u-boot binaries that are built.
This patch has been build and run tested on a kria kv260 starter kit.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Follow changes to other OrangePi boards, most importantly
orangepi-zero-plus2, which this board support is based on. This includes
switching to extlinux as boot mechanism and dropping custom U-Boot boot
script.
Rootfs image no longer fits into default 60M (mostly due to Linux
modules), so increase it to 120M.
While at it, bump Linux to 6.1.4 and U-Boot to 2023.01.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using the buildroot compiler, it builds the u-boot.itb immediately
after building the fit-dtb.blob. This causes a build failure when using
the CONFIG_MULTI_DTB_FIT build configuration. This patch adds the necessary
dependency to guarantee that the fit-dtb.blob has finished building before
trying to build the u-boot.itb.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3310463281
This patch has been submitted to u-boot mainline:
https://lore.kernel.org/all/20221221075446.47141-1-neal.frager@amd.com/
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
http://freescale.com/ urls are all redirected to the NXP homepage
https://www.nxp.com/
Even if the link is not broken in the sense of a 404 http error, the
pointed resource is not found.
This commit updates the old freescale link to the correct nxp.com
location.
Note: the link now requires a free registration to be accessed.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
http://freescale.com/ urls are all redirected to the NXP homepage
https://www.nxp.com/
Even if the links are not broken in the sense of a 404 http error, the
pointed resources are not found.
This commit updates the old freescale links to the correct nxp.com
locations.
Note: the link to the SABRE for Automotive Infotainment Quick Start
Guide now requires a free registration to be accessed.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
http://freescale.com/ urls are all redirected to the NXP homepage
https://www.nxp.com/
Even if the link is not broken in the sense of a 404 http error, the
pointed resource is not found.
This commit updates the old Freescale link to the correct nxp.com
location.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a defconfig for the Starfive VisionFive2 board, a board built around the
Starfive JH7110 RISC-V 64bit SoC.
This board comes with functional lowlevel and U-Boot bootloaders in SPI
flash. The defconfig reuses these and only builds a (5.15 based) kernel and
rootfs.
The factory shipped U-Boot is hard coded to look at MMC partition 3.
Signed-off-by: Francois Dugast <francois.dugast.foss@gmail.com>
[Peter: add to DEVELOPERS]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Lichee RV Dock is a RISC-V Linux development kits with high integration,
small size and affordable price designed for opensource developer.
https://wiki.sipeed.com/hardware/en/lichee/RV/Dock.html
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Tested-by: Indrek Kruusa <indrek.kruusa@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Lichee RV - Nezha CM is a compute module with modular design, equipped
with Allwinner D1 chip (based on T-Head XuanTie C906 core), 512MB DDR3
RAM.
Board support is based on the nezha defconfig already available in
buildroot.
https://wiki.sipeed.com/hardware/en/lichee/RV/RV.htmlhttps://linux-sunxi.org/Sipeed_Lichee_RV
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Reviewed-by: Indrek Kruusa <indrek.kruusa@gmail.com>
Tested-by: Indrek Kruusa <indrek.kruusa@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is now based on U-Boot 2022.10 and has gained SPL support, so use that
instead of sun20-d1-spl. With this we can also drop the u-boot patch and
patch directory.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes a problem in the vck190 boot.bin generation as it should be
using the u-boot.dtb as the u-boot device tree and not the Linux system.dtb.
While both dtbs are basically the same, it is better not to mix this up.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit
5bbc20154e ("configs/zynqmp_kria_kv260_defconfig:
bump to Xilinx 2022.2"), we're using U-Boot version Xilinx 2022.2,
which already carries the psu_init_gpl.c, causing the build to fail as
our patch doesn't apply.
Fix this by dropping the no longer needed patch.
Fixes: 5bbc20154e ("configs/zynqmp_kria_kv260_defconfig: bump to Xilinx 2022.2")
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit
3c997c457a ("configs/zynqmp_zcu106_defconfig:
bump to Xilinx 2022.2"), we're using U-Boot version Xilinx 2022.2,
which already carries the psu_init_gpl.c, causing the build to fail as
our patch doesn't apply.
Fix this by dropping the no longer needed patch.
Fixes: 3c997c457a ("configs/zynqmp_zcu106_defconfig: bump to Xilinx 2022.2")
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch moves the board/zynqmp/kria/kv260/uboot.fragment file
to the board/zynqmp/kria directory. The reason is that this file
is the same for any kria starter kit and is not specific to the kv260.
By moving the file, it can be logically re-used with the kr260 when
support for this starter kit is added to buildroot.
KR260 Starter Kit:
https://www.xilinx.com/products/som/kria/kr260-robotics-starter-kit.html
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds support for Xilinx Versal VCK190 evaluation board.
VCK190 features can be found here:
https://www.xilinx.com/products/boards-and-kits/vck190.html
The VCK190 is based on the Xilinx Versal family:
https://www.xilinx.com/products/silicon-devices/acap/versal.html
The VC1902 included with the VCK190 evaluation board has Xilinx
AI Engine acclerators designed for accelerating machine learning
applications. Also included is an upgrade from prior Zynq and
ZynqMP families to ARM Cortex-A72 cores.
While the Linux kernel for Versal is quite similar to ZynqMP,
the boot process has significantly changed.
Triple-redundant MicroBlaze cores are used to boot and setup
Versal devices. For this reason, current buildroot support
will download pre-built firmware images and use Xilinx bootgen
to generate the boot.bin for the vck190.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps following packages to the newer version:
- OpenSBI v1.1
- U-boot v2022.10
- Linux 6.0
Linux kernel is hosted on AndesTech Github which includes ethernet,
SD card, DMAC, RTC, WDT drivers support. OpenSBI is based on v1.1
with andes platfrom fdt driver.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch fixes the kv260.sh to generate a working u-boot.itb
now that the CONFIG_MULTI_DTB_FIT u-boot option is no longer used.
This is a follow-up fix of
515319b86f ("board/zynqmp/kria/kv260/uboot.fragment:
remove unnecessary CONFIG_MULTI_DTB_FIT option") to fix the build of:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3310463281
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch removes the CONFIG_MULTI_DTB_FIT u-boot option for the
zynqmp_kria_kv260_defconfig as it is not necessary. The post build
kv260.sh creates the proper u-boot.itb without needing this option.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3310463281
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch migrates the u-boot device tree definition
from uboot.fragment files to use BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS
instead for the zynqmp_kria_kv260_defconfig.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch migrates the u-boot device tree definition
from uboot.fragment files to use BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS
instead for the zynq_zc706, zynq_zed and zynq_microzed defconfigs.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
This defconfig did not even have an entry in the DEVELOPERS file.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499140
Cc: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
This defconfig did not even have an entry in the DEVELOPERS file.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499051
Cc: Filip Skoneczny <fskoneczny@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
This defconfig did not even have an entry in the DEVELOPERS file.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499050
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch migrates the u-boot device tree definition
from uboot.fragment files to use BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS
instead for the zynqmp_zcu102 and zynqmp_zcu106 defconfigs.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add BR2_TARGET_UBOOT_NEEDS_GNUTLS=y and BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y
since this are dependencies for building mkeficapsule u-boot tool.
Change the offset of the rootfs to left enough space for the U-Boot that
has increased.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, the cmdline.txt file is installed in $(BINARIES_DIR) by the
rpi-firmware package. Overriding files in there can not be done with an
overlay (which only applies to $(TARGET_DIR)), and thus requires using
either a post-build or post-image script, which is not always very
practical when a custom file must be used.
Like was done in 689b9ac439 (package/rpi-firmware: rework boot/config
file handling) for config.txt, add an option to allow users to specify
the path to a custom cmdline.txt.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a defconfig to build an AArch64 U-Boot based firmware implementing the
subset of UEFI defined by EBBR[1], as well as a Linux OS disk image booting
with UEFI, to run on Qemu.
The generated firmware binary can also be used to install or run another OS
supporting the EBBR specification.
We do not have Linux 5.19 headers at the moment therefore we rely on 5.17
in the defconfig.
[1]: https://github.com/ARM-software/ebbr
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a defconfig for the Starfive VisionFive board, a board built around the
Starfive JH7100 RISC-V 64bit SoC (same as Beaglev).
This board comes with functional lowlevel and U-Boot bootloaders in SPI
flash. The defconfig reuses these and only builds a (6.0 based) kernel and
rootfs.
The factory shipped U-Boot is hard coded to look at MMC partition 3 and
misses some variables, so we provide a uEnv.txt to fix that up, based on
what is done in provided Fedora image.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update description:
TF-A to v2.4-stm32mp-r1
U-boot to version v2020.10-stm32mp-r2.1
Linux to v5.10-stm32mp-r2.1
This patch also updates U-boot to to use FIP image.
Reference:
https://octavosystems.com/octavo_products/osd32mp1-brk/
The device tree blobs, and the U-boot patches come from Octavo System:
https://github.com/octavosystems/meta-octavo-osd32mp1
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update description:
TF-A to v2.4-stm32mp-r1
U-boot to version v2020.10-stm32mp-r2.1
Linux to v5.10-stm32mp-r2.1
This patch also updates U-boot to to use FIP image.
Reference:
https://octavosystems.com/octavo_products/osd32mp1-red/
The device tree blobs, and the U-boot patches come from Octavo System:
https://github.com/octavosystems/meta-octavo-osd32mp1
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mender-grubenv no longer uses the mender_grubenv* directories, instead opting
to put the mender_grubenv directories in a grub-mender-grubenv top-level
directory. While there is a legacy install mode which keeps the two separate
directories, it is better to move forward and rip the bandaid off before it
becomes too painful to update in the future if the legacy option is removed
entirely.
- Update the license file sha256 sum due to a year change.
- mender-grubenv no longer installs grub.cfg, so mender_grub.cfg must be copied
manually to grub.cfg.
- BOOT_DIR replaces ENV_DIR in the Makefile.
- The sleep grub2 module is now a requirement.
- /etc/mender_grubenv.config file must be present on the system for the
grub-mender-grubenv-{print,set} scripts to work properly.
In addition to the above changes, update the mender example board file to work
with the updated mender-grubenv version.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This uses a newer firmware implementation that is much faster at
booting. It is supported as of Qemu 7.0.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the listed versions to match current status since commit
b4d9b51508 ("configs/solidrun_macchiatobin: bump BSP components").
All components are now from upstream so no need to state that for each
one.
Cc: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Opensbi is now based on 1.1, U-Boot on 2022.07-rc3 and Linux on 5.19-rc1.
We don't yet support 5.19 kernel headers, so use 5.17 instead.
The incompatibility between opensbi and u-boot is now fixed, so drop
0001-arch-riscv-dts-sun20i-d1.dtsi-adjust-plic-compatible.patch.
The updated device tree in the kernel tree no longer specifies a memory
node (and the board exists in 512M/1G/2G variants, so instead use the
(otherwise identical) device tree provided by u-boot, where the memory
node is fixed up based on the detected memory size.
On riscv, the linux kernel unconditionally wants to build its bundled
dtc, so it needs flex and bison, even if it is not going to build any
DTB. We can get flex and bison either via the system ones, or we get
them as they are in LINUX_KCONFIG_DEPENDENCIES. However, relying on this
is a bit fragile, so we keep asking the kernel to build a DTB, so that
we do ensure that our host-{flex,bison} are built and in the dependency
chain of the kernel (for PPD).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr:
- extend on why we keep building a DTB from the kernel
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When enable DM for SPL binary, the DTB part of SPL may not 4 bytes aligned.
If u-boot-spl is not aligned, the offset of the DDR firmware is not 4
byte aligned when u-boot-spl-ddr.bin is created. This causes the ddr
firmware to not be loaded correctly at boot.
See imx-mkimage commit
https://source.codeaurora.org/external/imx/imx-mkimage/commit/?id=bba038d893046b44683182dba540f104dab80fe7
for the imx-mkimage details.
Signed-off-by: Bram Vlerick <bram.vlerick@openpixelsystems.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump the kernel version for all riscv nommu configs from 5.18 to 5.19.
That way, we can remove the one and only riscv nommu patch,
since this patch is included in kernel 5.19.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
nanopi-neo no longer builds, as uboot needs python2 on the host:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2812053540
I no longer have access to that board, so I can't test an update to
either uboot or the kernel anymore.
Drop the board.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The readme.txt contains a make target that does not match the actual
defconfig file name, fix that.
Fixes: 1500b7d5c8 ("configs/broadcom_northstar: new defconfig")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Broadcom Northstar family of SoCs is most commonly used for home
routers. It's an ARM platform with Cortex-A9 CPU(s).
All known Northstar devices come with CFE bootloader which almost
always expects a TRX firmware format (with exception for D-Link). Some
vendors (like Luxul and Netgear) wrap TRX in their own containers.
This board code provides:
1. Minimal kernel with support for on-SoC blocks. It enables Linux
drivers for SoC, watchdog, Ethernet, switch, USB, PCIe, LEDs).
2. Post image script building firmware images. In uses Buildroot
packages tools (lzma_alone, otrx, lxlfw) to build
bootloader-compatible images that can be flashed.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Those components are aligned with NXP BSP lf-5.10.72-2.2.0.
This commit also refresh the readme.txt file:
- update no longer working URLs,
- enhance flashing instructions (use ${mmcdev} uboot variable),
- add "bs=1M" option to dd for better flashing performances.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/2781800735
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Those components are aligned with NXP BSP lf-5.10.72-2.2.0.
This commit also refresh the readme.txt file:
- update no longer working URLs,
- enhance flashing instructions (use ${mmcdev} uboot variable),
- add "bs=1M" option to dd for better flashing performances.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/2781800730
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to version 2022.04 and remove the two patches
that have already been upstreamed.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-By: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The filename was changed from bootloader-BEAGLEV to bootloader-JH7100, update
the documentation for the beaglev board as well.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Buildroot currently has all of the needed packages to use Mender as the primary
update system. However, there isn't any documentation or examples now that
provide a starting point for users. This lack of documentation makes setting up
a Mender based update system difficult and time-consuming.
Provided in this patch series is a mender_x86_64_efi_defconfig of which sets up
an x86_64 EFI based build that is ready to flash to a USB pen drive or use in a
QEMU environment. The system partition schema comprises of two equally sized
root partitions and a data partition that mounts to /var/lib/mender as a
persistent data store partition.
There is a board/mender/readme.txt provided, which gives users documentation on
how to flash the built image or boot the image using QEMU as well.
The post-build and post-image-efi scripts also have four options:
-a --artifact-name:
- The name of the artifact, this is added to /etc/mender/artifact_info
-o --data-part-size:
- The data partition size.
-d --device-type
- The device-type used by mender to catagorize registered devices.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Mikael Bourhis-Cloarec <mikael.bourhis@smile.fr>
[Romain: rebase on master (01.2022)
- update genimage-efi.cfg to use GPT partition table and genimage-15 syntax
- bump the kernel to 5.15.13
- Add host-libelf kernel dependency
- Use BR2_TARGET_GRUB2_BUILTIN_MODULES_EFI after commit 82d1e8c628
(boot/grub2: use none platform when building for host)
- Add regexp grub mandatory module for mender-grubenv
- remove startup.nsh from genimage-efi.cfg after commit 3efb5e31fc
(board, boot, package: remove usage of startup.nsh in EFI partition)]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[Arnout:
- abbreviate sizes and partition uuids, remove implicit ones in genimage.cfg
- change data partition uuid to Linux (instead of x86_64 rootfs)
- fix whitespace and shellcheck errors in scripts
- remove --generate-mender-image option, always create it
- remove empty directory and -O ^64bit when creating data fs
- remove redundant e2fsck
- add -serial stdio option to qemu call
- update kernel to current stable 5.18.14
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This defconfig uses mesa3d's i965 DRI driver, but mesa3d no longer has
any DRI driver now, so this defconfig no longer builds.
Switching to the Gallium driver would require access to an actual board
to test, and that was not available when applying the mesa3d bump.
So, better drop this defconfig, and let an interested party reinstate
it, using the Gallium driver.
Note that we do still have the defconfig for the basic, non-graphical
Minnowbaord Max.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a buildroot configuration file to build a minimal Linux environment
for the Canaan KD233 board.
The configuration file is canaan_kd233_defconfig. It builds a bootable
kernel image with an embedded initramfs root file system. The image
built can be flashed to the board as is and does not require a boot
loader. This configuration uses the tiny busybox configuration defined
in board/canaan/k210-soc/busybox-tiny.config.
U-Boot currently does not support this board, making it impossible to
boot the kernel after loading it from the SD card. However, the SD card
is usable from Linux once booted using the canaan_kd233_defconfig
configuration.
The configuration also enable the kflash and pyserial-miniterm host
tools for flashing image files to the board and opening a terminal
console.
The readme.txt file documents how to build and boot the Canaan KD233
board with this configuration.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add two buildroot configuration files to build a minimal Linux
environment for the Sipeed MAIX Go board. The configurations are:
* sipeed_maix_go_defconfig: Build a bootable kernel image with an
embedded initramfs root file system. The image built can be flashed to
the board as is and does not require a boot loader. This configuration
uses the tiny busybox configuration defined in
board/canaan/k210-soc/busybox-tiny.config.
* sipeed_maix_go_sdcard_defconfig: Build a kernel image with a root
file system on the SD card and using U-Boot as the boot loader. This
uses the default busybox minimal configuration.
Both configurations also enable the kflash and pyserial-miniterm host
tools for flashing image files to the board and opening a terminal
console.
The readme.txt file documents how to build and boot the Sipeed MAIX-Go
board with these configurations.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add two buildroot configuration files to build a minimal Linux
environment for the Sipeed MAIX-Dock board. The configurations are:
* sipeed_maix_dock_defconfig: Build a bootable kernel image with an
embedded initramfs root file system. The image built can be flashed to
the board as is and does not require a boot loader. This configuration
uses the tiny busybox configuration defined in
board/canaan/k210-soc/busybox-tiny.config.
* sipeed_maix_dock_sdcard_defconfig: Build a kernel image with a root
file system on the SD card and using U-Boot as the boot loader. This
uses the default busybox minimal configuration.
Both configurations also enable the kflash and pyserial-miniterm host
tools for flashing image files to the board and opening a terminal
console.
The readme.txt file documents how to build and boot the Sipeed
MAIX-Dock board with these configurations.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add two buildroot configuration files to build a minimal Linux
environment for the Sipeed MAIXDUINO board. The configurations are:
* sipeed_maixduino_defconfig: Build a bootable kernel image with an
embedded initramfs root file system. The image built can be flashed to
the board as is and does not require a boot loader. This configuration
uses the tiny busybox configuration defined in
board/canaan/k210-soc/busybox-tiny.config.
* sipeed_maixduino_sdcard_defconfig: Build a kernel image with a root
file system on the SD card and using U-Boot as the boot loader. This
uses the default busybox minimal configuration.
Both configurations also enable the kflash and pyserial-miniterm host
tools for flashing image files to the board and opening a terminal
console.
The readme.txt file documents how to build and boot the Sipeed MAIXDUINO
board with these configurations.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add two buildroot configuration files to build a minimal Linux
environment for the Sipeed MAIX Bit board. The configurations are:
* sipeed_maix_bit_defconfig: Build a bootable kernel image with an
embedded initramfs root file system. The image built can be flashed to
the board as is and does not require a boot loader. This configuration
uses the tiny busybox configuration defined in
board/canaan/k210-soc/busybox-tiny.config.
* sipeed_maix_bit_sdcard_defconfig: Build a kernel image with a root
file system on the SD card and using U-Boot as the boot loader. This
uses the default busybox minimal configuration.
Both configurations also enable the python-kflash and pyserial-miniterm
host tools for flashing image files to the board and opening a terminal
console.
The readme.txt file documents how to build and boot the Sipeed MAIX-Bit
board with these configurations.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The Linux environment for all boards using the Canaan Kendryte K210 SoC
can be built with the same process, using configurations that differ
only by the device tree used for the build. This patch add the
shared configurations, rootfs overlay and scripts used for all
K210-based boards.
Since the K210 SoC only has 8 MB of SRAM, a special busybox
configuration and rootfs overlay are added to save memory at runtime:
* For configurations using direct kernel boot (no boot loader), the
default busybox configuration busybox-minimal.config is modified
using the fragment file board/canaan/k210-soc/busybox-tiny.config.
This reduces the size of the busybox executable to save memory when
executing shell commands.
* Busybox init system is not used and a special init scripts is provided
using the rootfs_overlay root file system overlay. This init script
simply mounts devtmpfs, /proc and /sys, and exec an interactive shell
after printing a logo. This avoids (1) boot failures due to large
memory allocations by the regular busybox init system (these
allocations fail on the K210 for lack of enough memory) and avoids
(2) keeping the init process sleeping in the background (wasted
memory).
The board/canaan/k210-soc/busybox-tiny.config and the rootfs overlay
files in board/canaan/k210-soc/rootfs_overlay are used for all Canaan
K210 SoC based boards.
For board configurations booting using the U-Boot boot loader, a common
set of linux kernel configuration parameters is provided by the file
board/canaan/k210-soc/linux-sdcard.config. In addition, the post build
script board/canaan/k210-soc/post-build.sh file and U-Boot image
generation configuration file board/canaan/k210-soc/genimage.cfg are
provided. The post-build script creates a generic "k210.dtb" symlink to
the compiled device tree file for the target board. This symlink is used
by the genimage.cfg configuration, making this file common for all
boards.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The genimage.cfg modified by this commit used the partition-type-uuid
c12a7328-f81f-11d2-ba4b-00a0c93ec93b, which identifies the EFI System
Partition, for a partition that isn't the EFI System Partition, but
just a regular FAT partition, for which GUID
ebd0a0a2-b9e5-4433-87c0-68b6b72699c7 is more appropriate.
So we switch these to use partition-type-uuid = F, as it makes more
sense.
Please note that this commit introduces a difference in the resulting
output, as those partitions will now have a different GUID.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This allows to match the recently written rules for
partition-type-uuid values.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit changes to use partition-type-uuid = U instead of
c12a7328-f81f-11d2-ba4b-00a0c93ec93b where relevant for the EFI System
Partition.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The boot partition is not an EFI System Partition, it is a normal FAT
formatted partition, so using type F instead of U makes more sense.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This allows to comply with the recently specified genimage.cfg writing
rules.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The gpt = "true" form is deprecated in genimage, use
partition-table-type = "gpt" instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Like we do in all other genimage configuration files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The patch is required to fix an issue in U-Boot for linking
the mkeficapsule tool against -luuid and -lgnutls.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/2720001065
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds additional uboot build options that are
required for kria k26 soms.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes the DP audio and video PLL configurations for the zynqmp-sm-k26-revA som.
It needs to be applied for both the kv260 and kr260 starter kits.
The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)
- DP system time clock PLL should use RPLL (0x3)
Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.
Register 0xFD1A007C configures the DP system time clock PLL.
This patch was build and run tested on a zynqmp-kria-kv260 target board.
Upstream-Status: submitted (https://lore.kernel.org/all/fa7e9abc419c9d7648405d1c62367dbe701d09b8.1652709736.git.michal.simek@amd.com/)
This patch will be removed from buildroot in a future release when no longer necessary.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch improves the documentation for kria k26 som qspi programming.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
[Peter: drop trailing spaces]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kernel is from upstream with a few extras to reduce the size of
the 'aspeed_g5' zImage because it is too big for the flash layout.
Mainline U-Boot has enough support to load the kernel from the flash
device and from network but it is still behind the OpenBMC branch
where most the development is done.
The main resulting file from the build is a flash image. The partition
layout matches the OpenBMC one for 32M chips. It makes it easier to
update the different partitions from Linux. Intermediate files can be
used to boot from U-Boot over the network or to boot QEMU using
-kernel/-initrd/-dtb.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The kernel is from upstream and U-Boot is from the OpenBMC branch
because mainline doesn't have the required support for HW, yet.
The main resulting file from the build is a flash image. The partition
layout matches the OpenBMC one for 64M chips. It makes it easier to
update the different partitions from Linux. Intermediate files can be
used to boot from U-boot over the network or to boot QEMU using
-kernel/-initrd/-dtb.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch is a temporary fix for the kv260 u-boot.itb generation
until a proper fix has been implemented within u-boot.
The problem is u-boot can only be configured to use the kria k26
som dts configuration at build time, and the kv260 carrier board
overlay is missing from the build. Without this, all of the carrier
board drivers are missing.
This patch will be removed from buildroot once u-boot can build a
correct u-boot.itb for the kria kv260 starter kit including the
carrier board overlay and corresponding drivers:
https://lore.kernel.org/all/20920b0df6b067aca4040459a9677d7d1d6d766a.1615354376.git.viresh.kumar@linaro.org/
Signed-off-by: Neal Frager <neal.frager@xilinx.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
[yann.morin.1998@free.fr: add URL provided by Luca]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now that all of the extlinux.conf files have been removed,
it is no longer necessary to check if the file exists.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch enables the zynqmp_kria_kv260_defconfig to auto-generate the
extlinux.conf file.
The board/zynqmp/kria/extlinux.conf and board/zynqmp/kria/post-build.sh have
been removed as they are no longer necessary.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch enables the zynqmp_zcu102_defconfig and zynqmp_zcu106_defconfig to
auto-generate the extlinux.conf file.
The board/zynqmp/extlinux.conf has been removed as it is no longer necessary.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch uses the BR2_ROOTFS_POST_SCRIPT_ARGS to auto-generate the
extlinux.conf file, so developers will only need to modify the
board_defconfig file to change the console and boot file system locations.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As we're about to remove the nds32 architecture support, remove the
only defconfig that used this CPU architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add RISC-V 64-bit nommu defconfig for QEMU virt machine with MMU
disabled.
Unlike qemu_riscv64_virt, qemu_riscv64_nommu_virt does not use OpenSBI,
since the kernel is running in machine mode (M-mode).
After the build is complete, you can start QEMU using the launcher
script:
$ output/images/start-qemu.sh
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the board/riscv/nommu directory to add a Linux kernel patch used
for all RISC-V NOMMU builds (QEMU and Canaan Kendryte K210 SoC based
boards). The patch is upstream and will be part of the upcoming 5.19
release.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit [1], the MMU support is mandatory for MMU-capable ARM
cores. This includes the arm926t ARM core used the
qemu_arm_versatile_nommu configuration.
From [2]
"I don't think supporting ARMv5 noMMU makes much sense, as
explained in the commit log. Supporting ARMv7-M definitely makes
sense, but not ARMv5 noMMU."
Remove this defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2477067386
[1] 8c925613dc
[2] http://lists.busybox.net/pipermail/buildroot/2022-May/643064.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Switch U-Boot from vendor downstream version to upstream. Since the
upstream U-Boot uses binman to build the bootable binary (flash.bin) the
need for the iMX specifc prepare script is no longer required.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds support for Xilinx Kria KV260 starter kit.
KV260 features can be found here:
https://www.xilinx.com/products/boards-and-kits/kv260.html
While the Kria SOM is based on a ZynqMP SoC, there are some key
boot config differences from the other ZynqMP evaluation boards.
1. There are no boot switches on Kria SOMs. The boot mode is thus
hard configured for QSPI flash. A pre-programmed boot.bin comes
with every Starter Kit. U-Boot can then find the Linux kernel and
file system on the SD card.
Optional instructions for updating the boot.bin in the QSPI flash
can be found in the readme.txt file and the link below.
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM
2. Kria SOMs use UART1 for the console instead of UART0. For this
reason, Kria Starter Kits will use a separate extlinux.conf file
from other ZynqMP evaluation boards.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps configs/zynq_xxx_defconfigs to Xilinx software release 2022.1
which includes the following updates:
- U-Boot bumped to 2022.01
- Linux bumped to 5.15.19
- rootfs changed from CPIO to EXT4
- extlinux.conf for distro boot support
- U-Boot migrated from git clone to tarball for faster builds
This patch has been build and run tested on a ZC706 evaluation board.
This patch has been build tested only for zed, microzed and qmtech boards.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes the DP audio and video PLL configurations for the
zynqmp-zcu106-revA evaluation board.
The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)
Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.
This patch was build and run tested on a zynqmp-zcu106-revA target board.
Upstream-Status: submitted (https://lore.kernel.org/all/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com/)
This patch will be removed from buildroot in a future release when no longer necessary.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When BR2_TARGET_OPTEE_OS=y, mkimage_fit_atf.sh is executed with two additional
variables so that the ITS file contains an additional node for the TEE binary.
Then the TEE binary will be packaged into the ITB in addition to TF-A and
U-Boot.
Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
