The ARC version of gcc does support graphite. It was probably just
forgotten when the BR2_GCC_VERSION_ARC symbol was introduced.
While we're at it, also remove a redundant newline.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: ARC Maintainers <arc-buildroot@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The blind option BR2_GCC_NEEDS_MPC was used to distinguish gcc versions
that rely on the mpc library and the ones that don't. But since a while
already, all the versions we support do need the mpc library. So this
symbol isn't needed anymore.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ExtUtils::MakeMaker is one of the Perl Core modules usually packaged in
Perl package for a Debian/Ubuntu based system.
For a Fedora based system, each Perl Core modules have their own RPM
package. So install only Perl package is not enough.
Fixes:
>>> host-libxml-parser-perl 2.41 Configuring
[...]
perl `which perl` Makefile.PL
Can't locate ExtUtils/MakeMaker.pm in @INC (you may need to install the ExtUtils::MakeMaker module)
Add a new Perl module check in dependency.sh.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: François Perrad <francois.perrad@gadz.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_DEPRECATED logic is a lot less useful than the legacy handling,
because the symbols just disappears without warning to the user. For
example, we had a few defconfigs that were using deprecated symbols
(which were not actually used because BR2_DEPRECATED wasn't set) so
these didn't build the expected code anymore.
Also, the idea behind BR2_DEPRECATED is that you can easily revive it
again if there is interest. However, it is relatively easy to revert
the removal of a package as well.
The deprecation is also more effort because it has to be removed twice:
once when deprecating, and once when really removing.
It doesn't make sense to add a legacy entry for BR2_DEPRECATED. Users
who actually used it will get legacy warnings instead.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated option.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated option.
[Peter: drop binutils patches]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Binutils was locked down to 2.24 because U-Boot 2014.01 didn't build
with more recent binutils. However, this doesn't work anymore because
binutils 2.24 is deprecated.
Current U-Boot 2016.09.01 doesn't work out of the box because the
u-boot-nand.img support has been removed.
Since updating U-Boot is generally not needed anyway, we just remove
the U-Boot support.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Binutils was locked down to 2.24 because U-Boot 2014.01 didn't build
with more recent binutils. However, this doesn't work anymore because
binutils 2.24 is deprecated.
Current U-Boot 2016.09.01 does build successfully, but we don't have a
board anymore to test it.
Since updating U-Boot is generally not needed anyway, we just remove
the U-Boot support.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The official `rapidxml` package release only supports up to GCC 4.6.x
for all capabilities. Implementers attempting to include the file
"rapidxml_print.hpp" will all result in a compilation failure when using
a currently supported Buildroot GCC version (all 4.7+ at this time).
With the provided patch, dependent packages will be able to use all of
rapidxml's capabilities using a generated toolchain from Buildroot (let
alone external toolchains).
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
[Thomas: rework patch so that it contains the proper line endings, and
applies properly without a pre-patch hook to convert the line endings
beforehand.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump kernel revision used by lego_ev3_defconfig to the latest tag from
ev3dev, as suggested by Peter. This is a 4.4 series kernel, which has the
added benefit of not necessitating a specific gcc to boot.
We need a patch to create an empty drivers/lego/Kconfig file for the build
to succeed though, as the ev3dev kernel normally expects a drivers tree to
be checked out there.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Suggested-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit
0924208839 ("configs/arm_juno: use 4.6
mainline kernel"), we're using a mainline kernel for the ARM Juno
board. But we're still fetching it from a Git repository, which is not
really efficient, so let's switch to use a tarball instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kodi segfaults as soon as it tries to load a python module:
Could not find platform independent libraries <prefix>
Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]
ImportError: No module named site
Segmentation fault
Turns out that keeping .py modules (with or without .pyc) fixes the
issue.
Currently, Kodi selects python, but since the format of modules is a
choice, we can not select it.
Fix that by inverting the dependency on python from Kodi:
- turn it into a depends rather than a select,
- add the dependency to ! pyc-only
- update the comment accordingly.
In addition, the !MMU and !static dependencies are updated since they
are no longer needed for Python (we now depend on it rather than
selecting it), but for other packages. The !MMU dependency is moved to
the _ARCH_SUPPORTS symbol as well.
Also, we can no longer "select BR2_PACKAGE_SAMBA4", because samba4
selects python, and we can no longer select python. Therefore, we switch
to a "depends on" dependency for samba4, which is fine as a user willing
to use Kodi with Samba will certainly realize that Samba should be
enabled.
Fixes bug #9221.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas:
- update on latest master
- take care of the !MMU/!static dependencies.
- take care of the samba4 problem.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This configuration allows out-of-the box Digilent Zybo
support. It uses mainline U-boot and Linux kernel.
This configuration generates a SD card image named sdcard.img.
[Peter: rename genimage.cfg, cleanup post-image script, enable VFP support,
use 4.6 kernel headers and add tools needed by genimage]
Signed-off-by: Sebastien Van Cauwenberghe <svancau@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a target configuration for the beaglebone that supports the SGX530
graphics acceleration and builds the qt5 demos with the eglfs backend.
The imagination technologies demos and fbv are also included. The Linux
kernel is based on the omap2plus defconfig, a config fragment adds the
required settings for SGX accelerator support.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch updates the target config for the beaglebone based on the
AM335x CPU. It also supports the beagleboneblack, the TI evm and evmsk.
Device tree blobs for am335x-evm, am335x-evmsk, am335x-bone,
am335x-boneblack will be built and a sd card image is created with a
post-image script. The kernel and driver versions match the
ti-processor-sdk 02.00.00.00. Patches allow the use of old AM335x evm
revisions (1 bit sd card) and JTAG debugging.
Kernel JTAG patch: By default the kernel will disable the JTAG clock,
access via the JTAG port will not work after the kernel booted. The
AM335x-evm has a JTAG header fitted, this patch keeps the JTAG clock
alive.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[Thomas: remove 1-bit MMC patch, it's causing a significant performance
regression for users of BeagleBone, which are 99.99% of the users of
this defconfig.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gcc 5.x introduced a regression in the ARM build, which causes the
s-automata program to consume a very significant amount of RAM during
the gcc build. This causes numerous failures with our Travis-CI based
testing of defconfigs.
In order to address this, this commit backports a commit from the gcc
master branch, to both our gcc 5.x and gcc 6.x support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The wpa_supplicant was in fact no introduced by Peter, but by Gustavo,
and Gustavo is much more active in maintaining this package, so let's
mention Gustavo as the developer for this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Refering to package/gcc/gcc-initial and package/gcc/gcc-final was not a
good idea, as it doesn't notify when gcc patches are
added/removed/modified, so change this to package/gcc so that it catches
all changes.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As explained in
https://wiki.qt.io/New_Features_in_Qt_5.6#Technology_Preview_Modules,
not only qt5quickcontrols2 is a technology preview component in Qt 5.6,
but also qt53d, qt5serialbus.
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
[Thomas: improve commit log with a reference.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
