Non-login users shouldn't have a valid shell so drop it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
AFAIK no package uses it and even if it did it would belong there.
And it's not a standard user either.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
AFAIK no package uses it and even if it did it would belong there.
And it's not a standard user either.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The sshd privilege drop user doesn't belong in the skeleton, it's
exclusively used by OpenSSH.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It belongs to the package.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We dropped the hal package quite some time ago, and it's not even a
properly created user.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
They all depend on having a custom busybox config and/or fully featured
utilities which depend on BR2_PACKAGE_BUSYBOX_SHOW_OTHERS.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even if the main shell is bash /etc/profile is also parsed so it's
redundant.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
That directory has been unused for ages so remove it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Don't blindly install the /etc/nsswitch.conf file, it's useless for
toolchains that aren't (e)glibc-based and misleading.
Make the installation conditional on a (e)glibc toolchain.
[Thomas: use $(INSTALL) instead of cp.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update inittabs (skeleton/busybox & sysvinit) to remove the trailing
REMOUNT_ROOTFS_RW comment used as magic string in system/system.mk to
enable/disable remounting the root filesystem rw or not since it affects
sysvinit in doing so properly as reported in bug #7442.
Instead update the sed expressions to match clean non-commented strings
by searching for "-o remount,rw /" and checking that's the end of the
line as well to avoid affecting possibly other remounts that a user can
have in a custom inittab.
Long-term the startup block of inittab should just move to a S00sysinit
script or similar so that rcS can pick it up directly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Not all our shells do install a pointer to /bin/sh. Besides, between
those that do and multiple ones are enabled, the last one to install
wins the the symlink.
Add a new config choice in the system sub-menu that allows the user to
explicitly select the shell to provide /bin/sh. If busybox is not
enabled, default to using dash, a POSIX shell.
Remove the symlink creation from bash.mk at the same time.
Note: for every shell, we select them, except busybox, on which we
depend, on the assumption that we do not want to force busybox in case
the user decided not to enable it.
[Peter: remove redundant !BR2_PACKAGE_BUSYBOX dependency]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Allow time zone setup and installation for configurations
using custom skeletons as well as default skeletons.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We define the two groups 'nobody' and 'nogroup' in our skeleton, but
they have the same gid, which is not valid.
This breaks the mkuser script, as noticed by Thomas.
Anyway, the user 'nobody' belongs to the group 'nogroup' in any sane
distribution.
So, just remove the spurious 'nobody' group.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Convert "system.mk" recipes to "target-finalize" hooks in order to:
- Ensure an ordering even if top-level parallel make is being used.
- Execute "system.mk" commands after the "target-finalize" initial message
is printed so they can be clearly distinguished from packages
building.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
User "default" with no password has been around for long time, but not
used within buildroot. Since we now have BR2_ROOTFS_USERS_TABLES it is
no longer needed.
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The correct capitalised form appears to be "BusyBox" rather than "Busybox";
fix all references to the latter form. (Most such references occur in the
manual and in commentary in package makefiles.)
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix minor spelling errors that exists in system/Config.in
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A new entry has been added to the "System Configuration" menu to allow
the user to set the location of additional user tables (besides the ones
defined in packages).
A user table is a text file, formatted using the mkusers syntax, which
describes the users on the target system, with their UID/GID, home
directory, password, etc.
The target root file system will be populated according the content of
these files.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[yann.morin.1998@free.fr: use plural TABLES; we need to remove the
intermediate users_table file, as it is no longer generated in
one shot, in case a previous run failed and did not remove it]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Peter: strip quotes/use local TZDATA_LOCALTIME variable]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[alexandre.belloni: move from "tzdata" to "system configuration"]
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[yann.morin.1998@free.fr: move into the BR2_TARGET_TZ_INFO conditionnal block]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Systemd only supports the architectures defined in
src/shared/architecture.h. So via a new parameter named
BR2_PACKAGE_SYSTEMD_ARCH_SUPPORTS, we enable the build of this package
only for those architectures.
Fixes http://autobuild.buildroot.net/results/bcc/bcce95eb0748505c0d62db21a6e420aae3c3181b/
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Systemd requires at least Linux headers 3.0 because it uses:
- setns(2) syscall, introduced in 3.0.
- IFLA_GROUP from if_link.h, introduced in 2.6.39.
Fixes http://autobuild.buildroot.net/results/098/09866da023d527b3c228a98f1fde104e780e1883/
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop old custom CDROM devices from the device table, these are x86-only
and really really old so it would be amazing these would be in working
order.
And they haven't been supported in linux for while.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libblkid library in util-linux uses fork. While it seems
potentially possible to disable the parts of the library that use fork
(the only parts using fork are parts related to LVM and Device Mapper,
which are said to be legacy as they are replaced by sysfs based
scanning, instead of having to fork to run a separate process).
However, since libblkid is used by:
- e2fsprogs, which uses lots of fork all over the place
- udev, which most likely will also need fork
There is not much point in making libblkid fork-less. As a
consequence, this commit makes util-linux/libblkid unavailable on
non-MMU architectures, and propagates the relevant dependency to the
reverse dependencies of libblkid.
This fixes the e2fsprogs build failure seen on Blackfin. The failure
was due to a configure test of e2fsprogs which was trying to link a
small test program against libblkid, which failed because there was an
undefined reference to fork() in the libblkid code.
Fixes:
http://autobuild.buildroot.net/results/ee2c1568d16ac040011dd4d6d8b543ff9e9e2622/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ramfs (which is used instead of tmpfs if CONFIG_SHMEM isn't enabled in the
kernel configuration), defaults to mode 0755 instead of 01777 like tmpfs
uses.
/tmp should be world writable and sticky, so explictly enforce the mode so
ramfs users gets it correct instead of relying on the defaults.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps systemd to v207 but also declares it as a provider for the
udev virtual package.
Starting with systemd 183, udev has been merged into
systemd. The udev daemon is now installed as /lib/systemd/systemd-udevd.
This means that /dev management using udev is only available if systemd
is chosen as init system.
When configuring systemd, the following options are available:
- activation of systemd-journal-gatewayd, to access the journal via
HTTP.
- activation of extra features like journal compression and sealing.
Support for uClibc has also been removed because:
- upstream has no interest in supporting uClibc.
- using a shrinked libc brings no advantage, given the size of all the
programs included in Systemd. So using glibc does not matter.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch converts udev to a virtual package. For the moment, there is only
one provider for the udev features: eudev.
Packages meant to provide udev-like features must select the symbol
BR2_PACKAGE_HAS_UDEV.
Packages depending on BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV or
BR2_PACKAGE_UDEV have been converted to use the new symbol.
[Peter: move legacy symbols under 2014.05]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
eudev is a userspace device management daemon. It is a standalone
version, independent from systemd. It is a fork maintained by Gentoo.
Features:
- No extra configuration options are available: Gudev is build if
libglib2 is selected.
- No dependency on hwdata as the package uses its own hardware
database (as does systemd).
eudev 1.3 is in sync with systemd v207.
[Peter: add BR2_USE_MMU dependency]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
warning: (BR2_INIT_SYSV) selects BR2_PACKAGE_SYSVINIT which has unmet direct
dependencies (BR2_PACKAGE_BUSYBOX_SHOW_OTHERS && BR2_INIT_SYSV)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A custom skeleton may include /etc/issue and/or /etc/hostname, in
which case we do not want to override them.
But those files could also be missing from the custom skeleton, or
the user may want to override their content.
Update the documentation to make it clear that the user can set these to the
empty string to make buildroot not create/overwrite these files.
[Peter: drop the different default values depending on skeleton]
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
[yann.morin.1998@free.fr: change from hiding it behind SKELETON_DEFAULT
to use conditional default values; move below the skeleton choice;
improve help entries]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add /dev/hvc* devices, and add them to securetty. These
are required for ppc64 virtual consoles.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
udev requires the epoll_create1 system call, which is not available on avr32.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes the following whitespace problems in Config.in files:
- trailing whitespace
- spaces instead of tabs for indentation
- help text not indented with tab + 2 spaces
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The option to choose init system was below the one for /dev management.
As Systemd forces the use of udev, it is logical to swap them.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When a package A depends on config option B and toolchain option C, then
the comment that is given when C is not fulfilled should also depend on B.
For example:
config BR2_PACKAGE_A
depends on BR2_B
depends on BR2_LARGEFILE
depends on BR2_WCHAR
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
This comment should actually be:
comment "A needs a toolchain w/ largefile, wchar"
depends on BR2_B
depends on !BR2_LARGEFILE || !BR2_WCHAR
or if possible (typically when B is a package config option declared in that
same Config.in file):
if BR2_B
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
[other config options depending on B]
endif
Otherwise, the comment would be visible even though the other dependencies
are not met.
This patch adds such missing dependencies, and changes existing such
dependencies from
depends on BR2_BASE_DEP && !BR2_TOOLCHAIN_USES_GLIBC
to
depends on BR2_BASE_DEP
depends on !BR2_TOOLCHAIN_USES_GLIBC
so that (positive) base dependencies are separate from the (negative)
toolchain dependencies. This strategy makes it easier to write such comments
(because one can simply copy the base dependency from the actual package
config option), but also avoids complex and long boolean expressions.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(untested)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since debug uart on imx6 sabreauto board is ttymxc3.
Signed-off-by: Abdul Hussain <hussain.abdul@outlook.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This update adds IP protocols created in the last 20 years.
Signed-off-by: Peter Sanford <psanford@nearbuysystems.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch lines up the comments in Config.in files that clarify which
toolchain options the package depends on.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed on the list, devtmpfs is quite a bit nicer default than
the old static /dev, so change it.
Notice that you NEED to enable CONFIG_DEVTMPFS / CONFIG_DEVTMPFS_MOUNT
in the kernel configuration if you manually build a kernel outside
buildroot, otherwise the rootfs won't work.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit introduces a specific BR2_TARGET_GENERIC_GETTY configuration flag.
This eliminates the need for checking if BR2_TARGET_GENERIC_GETTY_PORT is an
empty string or not. It also allows hiding various getty options when getty
isn't enabled.
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since kmod 14, the support for building a static library has been
removed completely from kmod. Therefore, we mark kmod as
!BR2_PREFER_STATIC_LIB, as well as all its reverse dependencies, which
includes the option to use the "udev" /dev management method.
[Peter: show comment for udev when BR2_PREFER_STATIC_LIB is enabled]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since the addition of root password setting support in buildroot, there have
been a few bug reports in this area ([1], [2]). In these cases, the system
mkpasswd did either not work, or did not provide the options we expect, like
-m <method>.
This patch adds a mkpasswd host package, based on the sources from whois. When
a non-empty root password is set, this package is used as a dependency.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[1] http://lists.busybox.net/pipermail/buildroot/2013-July/075771.html
[2] http://lists.busybox.net/pipermail/buildroot/2013-July/075869.html
[Thomas P: use $(INSTALL) instead of install, put -lcrypt at the end
of build command line to allow gcc to find the crypt() function in
lcrypt.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
udev-182 requires several groups to be resolvable at udev startup,
including disk, cdrom, floppy, tape, audio, video, lp, tty, dialout,
and kmem. Only some of these are in the default skeleton's group
file, So let's add the missing groups, and plugdev too.
This avoids getting these logs in /var/logs/messages:
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'dialout' unknown
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'kmem' unknown
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'video' unknown
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'lp' unknown
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'floppy' unknown
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'cdrom' unknown
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'tape' unknown
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It can be useful to have different configuration use the same post-build
and/or post-image scripts as they share a common infrastructure, but yet
have minor differentiation.
This option allows passing zero or more additional arguments to each
post-build or post-image script.
The same set of extra arguments are passed to all scripts, it is not
possible to pass different arguments to each script.
[Peter: fix help text, post-image gets called with the images dir]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Upon logging, dropbear whines if /root is group- or others-writable, and
key-based authentication is attempted, reverting to password-based
authentication:
dropbear[149]: /root must be owned by user or root, and not writable by others
dropbear[149]: Password auth succeeded for 'root' from 192.168.127.35:41566
On my system, /root was 770. Changing to 700 fixed the issue.
Having /root 700 is a good idea, anyway.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We already provide BR2_TARGET_GENERIC_HOSTNAME to set /etc/hostname,
so a default /etc/hostname file isn't needed.
More importantly, if the user has explictly set BR2_TARGET_GENERIC_HOSTNAME
to the empty string, we would still end up with a /etc/hostname containing
'buildroot' which is unlikely to be what the user wanted.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Currently, /home/default is mode 2755 which means it is setgid.
Since /home/default is not group-writable, it is useless.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We ran into a "Login incorrect" problem when running the same rootfs
image across platforms with different loging ports ttyS0/1/2/3.
Simply assignning "console" to BR2_TARGET_GENERIC_GETTY_PORT, which in
turn modifies the /etc/inittab, is not enough because the "console" device
was missing in the /etc/securetty.
While current securetty has enumerated a lot of ttys, this patch should save
some efforts to enumerate more.
[Peter: guard with single quotes]
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Adding ttyPS0 and ttyPS1 to securetty for Zynq.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since the post-image config option uses the plural for "Custom
scripts", do the same for the post-build config option, for
consistency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Just like we have a post-build script mechanism that gets executed
after the build of all packages but before the creation of the
filesystem images, let's introduce a post-image script mechanism, that
gets executed once all filesystem images have been generated.
This can for example be used to call a tool building a firmware image
from different images generated by Buildroot, or automatically extract
the tarball root filesystem image into some location exported by NFS,
or any other custom action.
[Peter: fix image script check]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The filesystem overlay is a tree that is copied over the target fs
after building everything - which is currently usually done in the
post-build script.
[Peter: don't ignore missing directories]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Passwords can be encoded in different ways (from the weakest
to the strongest): des, md5, sha-256, sha-512
Add a choice entry to select the method, defaulting to 'md5'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In case one is using a custom skeleton, the root pasword might already be
set in this case, and should not be overriden.
Just ask for (and set) the root password only for the default skeleton.
Reported-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For some systems, you don't want to run any getty, so allow the option
to be disabled when the empty string is used.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add an option in the menuconfig to specify a root password.
If set to empty, no root password is created; otherwise, the password is
encrypted using MD5 (MD5 is not the default for crypt(3), DES-56 is, but
MD5 is widely available, not-so-strong, but not-so-weak either).
Add a check for 'mkpasswd' as a new dependency.
[Peter: fix typo/capitilization and simplify logic]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This option is useful for cases where the terminal isn't a bare serial
vt100, but e.g. a linux tty with more features.
Signed-off-by: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Toolchain Linaro 2012_09 and possibly other glibc based ones
rely on the existence of nsswitch.conf. If it's missing names
from /etc/hosts are not resolved and thus "localhost" is not
known.
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The /var/www directory is listed in /etc/passwd in the skeleton target
filesystem as the home directory of the www-data user (uid 33).
In the final target filesystem, /var/www should be owned by www-data. This
is important for the lighttpd package, for example.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to solve
http://autobuild.buildroot.org/results/34f6843137efda20626af72714c110280ec577d7/build-end.log,
this patch makes the D-Bus package as well as all the packages that
select the D-Bus package 'depends on BR2_USE_MMU'.
In addition, for the specific case of gvfs, the missing
BR2_TOOLCHAIN_HAS_THREADS dependency is added (threads are required by
D-Bus, so they are also required by gvfs which selects D-Bus).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Using severals post build scripts is usefull to share
script between severals boards/projects.
[Peter: fix trailing spaces in Config.in]
Signed-off-by: Philippe Reynes <philippe.reynes@sagemcom.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This directory groups the following elements:
* the default root filesystem skeleton
* the default device tables
* the Config.in options for system configuration (UART port for
getty, system hostname, etc.)
* the make rules to apply the system configuration options
Even though the skeleton and device tables could have lived in fs/, it
would have been strange to have the UART, system hostname and other
related options into fs/. A new system/ directory makes more sense.
As a consequence, this patch also removes target/Makefile.in, which
has become useless in the process.
[Peter: fixup TARGET_SKELETON settings / documentation to match]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
