Currently, when we need to do a conditional on the type of C library
used, we need to take into account the three toolchain backends. As we
are going to add eglibc support to the Buildroot toolchain backend, it
would become even uglier, so this patch introduces two new hidden
options: BR2_TOOLCHAIN_USES_UCLIBC and BR2_TOOLCHAIN_USES_GLIBC, that
exist regardless of the toolchain backend. The entire Buildroot code
base is converted to use those options.
Note that we have intentionally created only one option
(BR2_TOOLCHAIN_USES_GLIBC) for both glibc and eglibc, since they are
essentially the same, as far as Buildroot is concerned.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit converts gdb to the package infrastructure, and therefore
moves it from toolchain/gdb to package/gdb.
The target package is now visible in "Package selection for the
target" => "Debugging, profiling and benchmark". The main option,
"gdb", forcefully selects the "gdbserver" sub-option by
default. Another sub-option, "full debugger" allows to install the
complete gdb on the target. When this option is enabled, then
"gdbserver" is no longer forcefully selected. This ensures that at
least gdbserver or the full debugger gets built/installed, so that the
package is not a no-op.
The host debugger is still enabled through a configuration option in
"Toolchain". It is now visible regardless of the toolchain type (it
used to be hidden for External Toolchains). The configuration options
relative to the host debugger are now in package/gdb/Config.in.host,
similar to how we have package/binutils/Config.in.host.
Since gdb is now a proper package, it is no longer allowed to 'select
BR2_PTHREADS_DEBUG' to ensure thread debugging is available when
needed. Instead, it now 'depends on
BR2_TOOLCHAIN_HAS_THREADS_DEBUG'. This option, in turn, is selected by
the different toolchain backends when appropriate. The
'BR2_TOOLCHAIN_HAS_THREADS_DEBUG_IF_NEEDED' option is removed, since
we no longer need to know when it is allowed to 'select
BR2_PTHREADS_DEBUG'. Also, the 'BR2_PTHREADS_DEBUG' option is moved to
appear right below the thread implementation selection (in the case of
the Buildroot toolchain backend).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Eclipse plugin at
https://github.com/mbats/eclipse-buildroot-toolchain-plugin allows
users of Eclipse to easily use the toolchain available in
Buildroot. To do so, this plugin reads
~/.buildroot-eclipse.toolchains, which contains the list of Buildroot
toolchains available on the system, and then offer those toolchains to
compile Eclipse projects.
In order to interface with this plugin, this commit adds an option
that allows the user to tell whether (s)he wants the Buildroot project
toolchain to be visible under this Eclipse plugin. It simply adds a
line in this ~/.buildroot-eclipse.toolchains file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Xtensa architecture had been removed because it required special
handling and depended on additional directories and files that became
obsolete over time. This change is more aligned to other architectures.
[Thomas: rebased on top of the "arch: improve definition of gcc mtune,
mcpu, etc." patch].
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_INET_RPC has for a long time been a not very descriptive
configuration option name, and with the advent of non-RPC glibc
toolchains and the apparition of libtirpc, we really need to rename it
to something more sensible, BR2_TOOLCHAIN_HAS_NATIVE_RPC.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As stated in commit 555c2585bf, the
Xtensa architecture has been introduced in 2009 and never changed
since its initial introduction. It requires some special handling that
is a bit annoying, and despite our call to the initial developers, and
the announcement of the deprecation of the architecture during the
2012.05, nothing has happened. Therefore, drop support for this
architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: me
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit ba92d6ef68 made hard float the
default when Cortex-A8 and Cortex-A9. The problem it was trying to fix
is that the newer Linaro toolchains (2012.05 and 2012.06) are
hard-float, so the default selection of soft-float enabled on ARM
doesn't work for those toolchains.
Unfortunately, not selecting soft-float causes problems with
the Crosstool-NG backend at the moment.
As an intermediate solution, make the soft float option disappear when
using external toolchain: the toolchain will decide by itself whether
to generate hard float or soft float code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cortex-A8 and Cortex-A9 ARM cores are guaranteed to provide a hardware
floating point unit, so there's no reason to default to software
floating point for them.
More importantly, the newest Linaro toolchains are hard float
toolchains, so basically an user choosing those toolchains and leaving
the default option of software float would run in compilation issues.
So let's make hard float the default for Cortex-A8 and Cortex-A9.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to use locale support on a Linux system, you need locale data
to be present:
* on a (e)glibc based system, this data is typically in the
/usr/lib/locale/locale-archive file, which can be created and
extended using the localedef program
* on an uClibc based system, the set of supported locales is defined
at build time by an uClibc configuration option.
This patch implements generating locale data for the following cases:
* Internal toolchain
* External toolchain based on (e)glibc. uClibc external toolchains
are not supported, because with uClibc, the set of supported
locales is defined at build time. CodeSourcery and Linaro
toolchains have been tested, Crosstool-NG toolchains are believed
to work properly as well.
* Toolchains built using the Crosstool-NG backend, but only (e)glibc
toolchains.
This feature was runtime tested with internal uClibc toolchain,
CodeSourcery ARM toolchain and Linaro ARM toolchain, thanks to a
simple C program that shows the data and a gettext translated message.
Note that this option differs from the "purge locales" option, which
is responsible for removing translation files and other locale stuff
installed by packages. At some point in the future, we may want to
clarify the respective roles of those options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Newer versions of GDB need pthread debugging support if threads are
enabled, which is always the case for glibc but is a configure option
for uClibc.
We have solved this for internal toolchains by selecting the
BR2_PTHREAD_DEBUG option from the GDB selection if needed, but as this
option isn't available when ctng/external toolchains are used, mconf
prints ugly warnings and the build may fail if an external uClibc
toolchain without pthread debugging support is used.
Fix it by introducing 2 more hidden config options:
- BR2_TOOLCHAIN_HAS_THREADS_DEBUG
- BR2_TOOLCHAIN_HAS_THREADS_DEBUG_IF_NEEDED
The first tells us if the toolchain HAS pthreads debugging support,
and is checked by check_uclibc_feature in helper.mk for external uClibc
based toolchains.
The second tells us if the toolchain is ABLE TO provide pthreads debugging
support if threads are enabled, either because it's an internal toolchain
where we can force enable it or an external glibc/eglibc toolchain or
uClibc with the option enabled.
Crosstool-ng forcibly enables this support, so those will always work.
The preconfigured uClibc-based toolchains we have also all enable it.
Finally, show a comment if this isn't the case so the (external toolchain)
user knows why. This is placed outside the choice option, as menuconfig
has a bug where it doesn't show choice selections which only contain
comments.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove the BR option and enable the configuration setting in the
uClibc defconfigs.
The BR2_PROGRAM_INVOCATION option only adds very little overhead to
uClibc, and we have a number of packages needing it, so simply always
enable it - Simplifying the kconfig logic and the number of choices
users have to make.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Allow the user to specify additional options for the target LDFLAGS.
I use this to pass the -te500v2 option to the linker, when using the
CodeSourcery toolchain for PowerPC. This chooses the correct CRT for e500 hard
float. Otherwise I get errors like
undefined reference to `_save32gpr_31'
undefined reference to `_rest32gpr_31_x'
at final link time.
[Peter: fixup, use qstrip]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Unfortunately, the official Blackfin toolchains are built without the
shadow password support, so our default Busybox configuration fails to
build.
Therefore, we introduce a new hidden knob
BR2_TOOLCHAIN_HAS_SHADOW_PASSWORDS, which is set to yes for Buildroot
internal toolchain, for toolchains generated by the Crosstool-NG
backend, for Glibc external toolchains and for Uclibc custom external
toolchains. It is left unset by the Blackfin toolchain profile.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: don't allow MMU on bfin]
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some packages need to know whether the MMU is in play, so add a toolchain
option to expose the feature to them.
[Peter: only show option on archs where it makes sense]
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
BR2_NEEDS_GETTEXT was already set to y for Buildroot internal
toolchain and external toolchains based on uClibc, but wasn't set for
toolchains based on uClibC built by the Crosstool-NG backend.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The selection of linuxthreads, linuxthreads old or NPTL doesn't make a
lot of sense for external toolchains. So, instead, we :
* Introduce an hidden BR2_TOOLCHAIN_HAS_THREADS option, which must be
selected by toolchain specific options when thread support is
available. Package needing to test thread support should use this
option.
* Move the none/linuxthreads/linuxthreads old/NPTL selection to
Buildroot internal toolchain configuration.
* Add an option in external toolchain to tell if thread support is
available or not in the external toolchain. We assume that glibc
without threads is not possible, as Ulrich Drepper said in
http://sourceware.org/ml/libc-alpha/2005-08/msg00091.html
ffmpeg, dmalloc and openvpn are fixed to use the new
BR2_TOOLCHAIN_HAS_THREADS option. For openvpn, --enable-threads=posix
is no longer used, as the configure script doesn't even understand
this option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_USE_SSP option is only used inside the uClibc build, so only
meaningful for Buildroot internal toolchains. Therefore, the option is
moved to the right location so that it isn't visible when working with
external toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of having BR2_GCC_CROSS_CXX and BR2_INSTALL_LIBSTDCPP, with
BR2_GCC_CROSS_CXX not being visible (and therefore being useless),
let's just keep BR2_INSTALL_LIBSTDCPP to enable C++ in the toolchain
and install C++ libraries on the target.
We also take that opportunity to make BR2_INSTALL_LIBSTDCPP an hidden
option, which is selected by an option in Buildroot toolchain support
or an option in External toolchain support, just as we did for other
toolchain features.
Some work definitely remains to be done :
- The name BR2_INSTALL_LIBSTDCPP is ugly, but we keep it for the
moment in order to avoid changing all packages.
- We should clarify the other language-related options (Fortran,
Java, Objective-C, etc.).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Turn BR2_LARGEFILE, BR2_INET_IPV6, BR2_INET_RPC, BR2_USE_WCHAR,
BR2_ENABLE_LOCALE and BR2_PROGRAM_INVOCATION into hidden options.
Then, for Buildroot toolchains, external toolchains and Crosstool-NG
toolchains, provide visible options that selects the hidden options.
This allows :
* To show a different label and help text in the case of Buildroot
toolchain (do you want to enable feature X ?) and in the case of
external toolchain (is feature X available in your toolchain ?)
* To not show any option when a glibc external toolchain is selected
(since glibc is assumed to support all of largefile, IPv6, RPC,
WCHAR, locale and program invocation) and have them all selected in
that case.
There is some amount of duplication between Buildroot toolchain config
options and Crosstool-NG toolchain config options, because kconfig
doesn't allow to source the same Config.in file twice (even if under
mutually exclusive conditions). This duplication is more readable that
the hack that consists in splitting files in multiple pieces.
However, this commit changes the name of the options visible in the
configuration interface, so existing .config files will have to be
updated accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The problem fixed by 60f945e47a is in
fact not limited to the AVR32 architecture, as reported by Will Newton
on the list. The issue is the combination uClibc 0.9.31 with gcc 4.2,
C++ support and locales.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It fails to build with:
ctype_members.cc: In constructor 'std::ctype_byname<_CharT>::ctype_byname(const char*, size_t) [with _CharT = char]':
ctype_members.cc:59: error: invalid use of incomplete type 'struct __uclibc_locale_struct'
/home/test/avr32-br/usr/avr32-unknown-linux-uclibc/sys-include/bits/uClibc_locale.h:85: error: forward declaration of 'struct __uclibc_locale_struct'
ctype_members.cc:60: error: invalid use of incomplete type 'struct __uclibc_locale_struct'
/home/test/avr32-br/usr/avr32-unknown-linux-uclibc/sys-include/bits/uClibc_locale.h:85: error: forward declaration of 'struct __uclibc_locale_struct'
ctype_members.cc:61: error: invalid use of incomplete type 'struct __uclibc_locale_struct'
/home/test/avr32-br/usr/avr32-unknown-linux-uclibc/sys-include/bits/uClibc_locale.h:85: error: forward declaration of 'struct __uclibc_locale_struct'
make[5]: *** [ctype_members.lo] Error 1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Handle the internal toolchain backend mechanism the
same way we handle other backends.
Signed-off-by: Yann E. MORIN <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
