Since commit c6bca8cef0 removed autocalculation of the ext2 filesystem
size, the default size is now set to 60MB. However, this is just too
small for at91sam9x5ek_mmc_dev_defconfig, which has a lot of extra
packages for development.
Increase the filesystem size to 120000K, which is a nice and round
number and leaves enough space for overhead on a 128MB flash drive.
Only 65MB is used.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit c6bca8cef0 removed autocalculation of the ext2 filesystem
size, the default size is now set to 60MB. However, this is too small
for firefly_rk3288_demo_defconfig. Indeed, the ext2 filesystem contains
the mali blob (90MB) and Qt5 (14MB), totalling to 125MB.
This is a bit too small to fit comfortably on a 128M flash driver, so
increase the size to 250000K (245MB).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit c6bca8cef0 removed autocalculation of the ext2 filesystem
size, the default size is now set to 60MB. However, this is too small
for pc_x86_64_bios_defconfig. Indeed, the ext2 filesystem contains the
kernel (4MB), the wireless modules (4MB), all firmware for wireless
modules (40MB), and the wifi userspace (9MB) and the udev hwdb (5MB)
which brings the total to 70MB.
Increase the filesystem size to 120000K, which is a nice and round
number and leaves enough space for overhead on a 128MB flash drive.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also use "BR2_TARGET_LINUX_CONFIG_FRAGMENT_FILES" instead of
"BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE".
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this patch we add a couple of of-the-tree patches for u-boot.
We have an update in hardware that changed the kick-start slave cores
procedure. So these patches introduce fixes to work with new axs103
version correctly.
They have been already accepted in upstream u-boot so we need to get rid
of them as soon as these updates will get available in buildroot.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this commit we update axs10x defconfigs with the following changes:
- rename "snps_axs101_defconfig" and "snps_axs103_defconfig" to
"snps_arc700_axs101_defconfig" and "snps_archs38_axs103_defconfig",
to reflect the ARC core being used
- bump linux kernel version to 4.10.8
- set up host linux headers to 4.10
- bump u-boot version to 2017.01
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this commit we update snps_archs38_zebu_defconfig the following:
- bump linux kernel version to 4.10.9
- set up host linux headers to 4.10
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the default xserver_xorg-server version 1.19.x, the AIGLX option
is no longer available (cfr. commit ec502ea8e4). In fact, AIGLX is
always enabled. So remove this option.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now we have changed the default ext2/3/4 filesystem size from automatic
to 60MB, the minnowboard_max graphical demo config doesn't fit anymore.
So increase it to double.
The exact number doesn't matter much, it has to be somewhat smaller
than 128MiB, so let's take a round number of 120000K.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit c6bca8cef0, the
auto-calculation logic of the ext4 filesystem size was removed. The
default size of 60MB is too small for the beaglebone_qt5_defconfig,
should it should be increased.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this commit we update snps_archs38_vdk_defconfig with the
following:
- bump linux kernel version to 4.10.8
- set up host linux headers to 4.10
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gx6605s is a nice SOC for dvbs2 DVB product, and C-SKY inside.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
[Thomas: drop post-image script copying the gdbinit file, and suggest
to use gdb -x option instead to point to the gdbinit file in board/.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes the following nommu kernel build issue:
arch/xtensa/kernel/setup.c: In function 'cpu_reset':
arch/xtensa/kernel/setup.c:553:2: error: implicit declaration of function
'local_flush_tlb_all' [-Werror=implicit-function-declaration]
local_flush_tlb_all();
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Linux configs are missing memmap= option that is required for xtfpga
boards configured w/o device tree starting with linux-4.9. Add it.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of downloading a *different* version of the kernel for the
headers as for the headers itself, use the same one.
BR2_KERNEL_HEADERS_AS_KERNEL is the default, but we have to set the
custom version.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kernel headers version used to be default when the default was
still 4.9. Now, however, we switched the default headers version to
4.10 but the beagleboardx15 kernel is still 4.9, so we have to set
the kernel headers version explicitly.
Fixes https://gitlab.com/buildroot.org/buildroot/builds/11700987
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit:
- Adds a development rootfs defconfig for the at91sam9x5ek board for
NAND-based configurations.
- Adds SD-card based configurations for the at91sam9x5ek board, both a
minimal one and development one.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: add at91sam9x5ek_mmc_defconfig to have all four combinations:
NAND minimal, NAND development, SD minimal, SD development.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This bump fix the build failure with gcc5 for barebox.
Some changes were made to the first patch to align to the latest
barebox api.
Also done the following changes:
- Use "BR2_TARGET_BAREBOX_CONFIG_FRAGMENT_FILES" instead of patching
the barebox sources.
- Use "BR2_GLOBAL_PATCH_DIR" instead of
"BR2_TARGET_BAREBOX_CUSTOM_PATCH_DIR".
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The board support package includes the following components:
- U-Boot 2016.11
- Linux 4.9.3
- packages:
- alsa-utils for basic audio usage of the on-board headphone jack
and microphone
- iw and wpa_supplicant for managing the wireless interface
Two Linux patches are necessary to enable audio and wifi support. Both
patches are fetched from the Linux next branch and are probably mainlined in
Linux 4.11.
A Linux configuration fragment enables the wireless device driver, which
is not enabled by default in the mainline defconfig of the board.
The wifi chip needs a NVRAM configuration file which is provided in the
rootfs overlay.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas: remove e2fsprogs from the target packages, add entry in
DEVELOPERS file, remove C++ support.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These defconfigs have been broken due to gcc5 for more than half a year,
and nobody stepped up to fix it. In addition, the rocketboards git
repository used by these defconfigs hasn't been reachable for more than
half a year. Finally, these defconfigs don't even use the
BR2_TARGET_UBOOT_ALTERA_SOCFPGA_IMAGE_CRC option so they are not a
great example for this family of targets.
Remove these defconfigs, as well as the board directory. Both are
removed in a single commit to avoid having an inconsistent readme.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Jan Viktorin <viktorin@rehivetech.com>
Cc: Charles Manning <cdhmanning@gmail.com>
Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig has been broken due to gcc5 for more than half a year,
and nobody stepped up to fix it. Remove it, as well as it board
directory.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Gergely Imreh <imrehg@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The scripts used for the minnowboards were generic for MinnowBoard and
MinnowBoard MAX. Since we removed the original MinnowBoard, this isn't
necessary anymore.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig has been broken due to gcc5 for more than half a year,
and nobody stepped up to fix it. Remove it, as well as the files it
references. Update the readme to remove references to MinnowBoard.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump U-Boot to 2017.01 version and kernel to 4.9.13.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The imx6ul-liteboard dts patches have been upstreamed in kernel 4.10,
so bump to this version and remove the local patches
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
And use same version for header headers as well.
[Peter: explicitly set BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_10 as pointed
out by Thomas]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The imx6sx-udoo-neo dts patches have been upstreamed in kernel 4.10,
so bump to this version and remove the local patches.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Nexbox A95X is a low cost Android STB based around an Amlogic s905(x) SoC
(quad A53), 8/16GB eMMC and 1/2GB RAM.
Both the s905 (gxbb) and s905x (gxl) variant is supported.
This defconfig uses mainline Linux. As the mainline support for s905 is
quite young, use the latest release candidate. There is currently no
support for this board in U-Boot or sources available for the vendor U-Boot,
so the defconfig doesn't build a u-boot and instead uses the existing U-Boot
available in the eMMC. This also means that we need to wrap the kernel as
uImage, which isn't suppported for aarch64. Instead this is done in the
post-build script.
Mainline aarch64 defconfig builds most drivers modular, so add mdev for
module autoloading.
[Peter: explicitly set BR2_cortex_a53=y]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- update to released kernel and U-Boot,
- move the headers config closer to the kernel ones,
- update readme.txt.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2017.01 version and kernel to 4.9.9.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When this qemu nios2 defconfig has been added, the insternal toolchain
used for testing was build with Linux kernel headers 4.9, so
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9 was missing in the defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
this kernel rev has numerous bug fixes, framework upgrades and new
features added.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
