Some RISC-V platforms (such as SiFive HiFive Unleashed) encapsulate
the OpenSBI firmware image inside U-Boot.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add `.stm32` binary format that U-Boot generates for the trusted
configuration of STM32MP platforms.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For consistancy and dependencies between uboot and uboot-tools,
this patch migrates the script creation over in a similar way as
the env image creation.
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Migrating the support for this feature to uboot-tools to gain the
ability to build env files when BR2_TARGET_UBOOT isn't selected.
When _ENVIMAGE_SOURCE is not set, we generate a default environment.
However, this default depends on the U-Boot configuration. Therefore,
this can only be done if uboot itself is built as well, and
host-uboot-tools needs to depend on uboot.
For the same reason, the commands for creating the environment have to
be adapted a little. Take this occasion to drastically simplify them.
Note: This patch creates a circular dependency with uboot until the
similar migration patch is merged for uboot scripts
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
It's easier to locate given format when it's sorted.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Before now, U-Boot SPL could only load the Platform Management Unit
(PMU) by patching the board-specific pm_cfg_obj.c file into the generic
PMU firmware, but that then requires generating a new PMU firmware for
every board configuration. To fix that, Luca Ceresoli added support to
U-Boot to load the pm_cfg_obj[1].
Like the PMU firmware, we need a way to pass the PMU cfg to U-Boot
during build. U-Boot only accepts the binary format of the cfg, so we
must convert the source file with the tool provided with U-Boot.
[1] https://lucaceresoli.net/zynqmp-uboot-spl-pmufw-cfg-load/
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
U-Boot versions newer than 2020.01 use Python 3.x instead of Python
2.x in various scripts.
We already had the BR2_TARGET_UBOOT_NEEDS_PYLIBFDT and
BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS options, but depending on the U-Boot
version, we now need to indicate if Python 2.x or Python 3.x should be
used.
In addition, it turns out that some U-Boot configurations need a
Python interpreter, without needing pylibfdt or pyelftools. Some of
our defconfigs were abusing the BR2_TARGET_UBOOT_NEEDS_PYLIBFDT option
to make sure a Python interpreter was built.
To solve this issue, we introduce a choice, that let the users specify
what, if any, host python version is needed. The default is 'no', to
preserve the previous behaviour, unless any of the pylibfdt or the
pyelftools options is enabled, in which case we hide the 'no' option,
and use python 2 by default. This dfault is guaranteed by the order of
options in the choice.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- explicitly make the choice a bool
- make BR2_TARGET_UBOOT_NEEDS_PYTHON a blind option
- introduce the 'no' option in the choice
- reword the commit log accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add an upstream URL to the help text in Config.in. This
addresses the issue where an incorrect URL is displayed
on the package stats web page.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
It allows you to add the u-boot.itb to the list of U-Boot images that
can be created. Like the others, this one is also copied to the image
folder.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 2c8ff251cb ("boot/uboot: add
option to generate env image from default env"), the possibility of
generating an environment image using the built-in U-Boot environment
as a source was added.
This is meant to happen when the string option
BR2_TARGET_UBOOT_ENVIMAGE_SOURCE is empty, but the original commit
added the Config.in help text to BR2_TARGET_UBOOT_ENVIMAGE, which is a
boolean option, and therefore cannot be empty.
Move the help text to BR2_TARGET_UBOOT_ENVIMAGE_SOURCE, where it
belongs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
U-Boot supports a number of environment variables to pass specific
information. The following patches were submitted in the past to one
some specific Config.in option to pass some of these variables:
- http://patchwork.ozlabs.org/patch/881197/ proposed an option to
pass a custom EXT_DTB= variable
- http://patchwork.ozlabs.org/patch/1018245/ proposed an option to
pass a custom DEVICE_TREE= variable
Instead of adding one Config.in option for each of those variables,
let's provide a generic mechanism to pass arbitrary variables during
U-Boot build step.
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Clemens Gruber <clemens.gruber@pqgruber.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support to extract compiled in default env
via u-boot's get_default_envs script and generate env image from it.
Signed-off-by: Denis Osterland <Denis.Osterland@diehl.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Rockchip rk3399 SOC based boards require python pyelftools library for
parsing dtb files, so lets add it as uboot dependency.
This commit introduces a new config option
BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS to achieve this.
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following check-package warning:
boot/uboot/Config.in:185: attributes order: type, default, depends on, select, help (http://nightly.buildroot.org/#_config_files)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rockchip's rk3328 encapsulates the BL31 part of ATP but it needs
image in ELF format. This is extension to
2c4809e608
This commit introduces a BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF variable
to achieve this.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some U-Boot configurations use lzop, which may not be available on the
build machine since it's not a mandatory dependency of Buildroot.
To solve this, a new option BR2_TARGET_UBOOT_NEEDS_LZOP is introduced,
and handled in a similar way to the existing
BR2_TARGET_UBOOT_NEEDS_OPENSSL option.
This fixes the build of the dra7xx_evm U-Boot defconfig as of U-Boot
2018.07, on a build machine without lzop installed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-Boot SPL configures pinmuxes, clocks and other low-level devices. On
the Xilinx ZynqMP SoCs the code to do this resides in a file called
psu_init_gpl.c which is initially generated by the Xilinx development
tools. Add an option to pass these files from the outside (e.g. in the
board files).
For this to work properly, a patch to U-Boot is needed. However this
patch must be applied by each defconfig using
BR2_TARGET_UBOOT_ZYNQMP_PSU_INIT_DIR. If it were in boot/uboot/ to be
applied unconditionally, it would break the build for configs using a
U-Boot version where the patch is already applied.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Joel Carlson <joelsoncarl@gmail.com>
Reviewed-by: Joel Carlson <JoelsonCarl@gmail.com>
Tested-by: Joel Carlson <JoelsonCarl@gmail.com>
[Thomas: add comment about U-Boot version requirements to use this
option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In order to boot on the Xilinx ZynqMP SoCs, U-Boot SPL requires a
recent PMU firmware loaded. Instruct U-Boot to add pmufw.bin to the
boot.bin file together with U-Boot SPL, and the boot ROM will load
both.
For this to work properly, a patch to U-Boot is needed. However this
patch must be applied by each defconfig that wishes to use
BR2_TARGET_UBOOT_ZYNQMP_PMUFW. If it were in boot/uboot/ to be applied
unconditionally, it would break the build for configs using a U-Boot
version higher than 2018.7-rc1 where the patch is already applied.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Joel Carlson <joelsoncarl@gmail.com>
Reviewed-by: Joel Carlson <JoelsonCarl@gmail.com>
Tested-by: Joel Carlson <JoelsonCarl@gmail.com>
[Thomas:
- indicate that this feature requires U-Boot 2018.07, since commit
c7df098a71e05dc81cee818747759e8060b59626 is needed.
- define UBOOT_ZYNQMP_KCONFIG_PMUFW only once, and instead use a
variable named UBOOT_ZYNQMP_PMUFW_PATH to store the path to the PMU
firmware]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some i.MX boards which use device tree to describe the hardware
for U-Boot generate a u-boot-dtb.imx binary.
Introduce the BR2_TARGET_UBOOT_FORMAT_DTB_IMX option to
handle such case.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
By default, the builsystem for uboot defaults to 'legacy', while the
default version is very well capable of using the 'kconfig' buildsystem
instead.
Having the 'legacy' buildsystem be the default in that case makes it
quite inconvenient for users: they would expect to be able to use e.g.
uboot-menuconfig et al. with the default uboot version.
Switch to using 'kconfig' when we use the latest version. Keep the
'legacy' as default for everything else.
Also, invert the 'legacy' and 'kconfig' entries in the choice: it is
nicer to have the recent and future-proof entry first.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
... to follow the convention: type, default, depends on, select, help.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some ARM64 platforms (such as Allwinner A64/H5) have a boot process
where U-Boot encapsulates the BL31 part of the ARM trusted
firmware. For such platforms, we need to build ATF before U-Boot, and
pass a BL31 variable pointing to ATF bl31.bin to the U-Boot build
process.
This commit introduces a BR2_TARGET_UBOOT_NEEDS_ATF_BL31 variable to
achieve this.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas:
- Rename option to BR2_TARGET_UBOOT_NEEDS_ATF_BL31
- Drop changes to arm-trusted-firmware.mk, they are taken care of by
previous commits.
- Improve Config.in help text
- Add missing dependency on arm-trusted-firmware when
BR2_TARGET_UBOOT_NEEDS_ATF_BL31 is enabled.
- Use bl31.bin from $(BINARIES_DIR) instead of taking it from ATF's
build dir.]
[Peter: depend on toplevel atf option and select bl31 option. Ensure it
cannot be enabled together with ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33
as that would cause circular dependencies]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the BR2_TARGET_UBOOT_SPL_NAME option accepts a space-separated
list of binaries, the same option can be reuses for TPL binaries as
well. This commit updates the string and help text to indicate that
the same option can be used for SPL and TPL.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
U-Boot nowadays also uses kconfig, so we can handle config fragments like we
do for barebox/busybox/linux.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a new config option BR2_TARGET_UBOOT_NEEDS_PYLIBFDT for U-Boot
targets, like sunxi, needing the Python libfdt library.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas: drop bogus selects on BR2_PACKAGE_HOST_{PYTHON,SWIG}.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
More and more of our defconfigs need to generate a U-Boot boot
script. It's a simple call to mkimage, but we already have 12
instances of this logic in board/, and there are patch series waiting
in patchwork adding 3 more boards that need this.
So let's add an option in the U-Boot package to generate such a boot
script image easily.
Note that we assume a single script needs to be generated, and the
output file name is boot.scr. The only platform for which it seems to
not be the case are the Boundary Devices platforms: they generate two
boot scripts, 6x_bootscript and 6x_upgrade, but they are anyway
installed inside TARGET_DIR, not BINARIES_DIR.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similaly to Linux, this patch adds the ability to copy in and build
out-of-source device tree sources during a U-Boot build.
Signed-off-by: James Balean <james@balean.com.au>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
SPL is the name used for spl on i.MX6, so update the same on
BR2_TARGET_UBOOT_SPL_NAME help text.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: rewrap Config.in help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On older SoCFPGA SoCs, there was not enough SRAM to fit the entire
U-Boot, so a SPL model was used. The SPL was therefore the binary that
had to be "prepared" to be loaded by the ROM code using the mkpimage
tool.
With newer SoCFPGA SoCs, there is enough SRAM to fit the entire U-Boot,
and therefore the ROM code directly loads U-Boot. In this case, it's the
real U-Boot image (not the SPL) that needs to be prepared using
mkpimage.
This code adds support for the newer SoCFPGA SoCs, by adjusting the
mkpimage related logic to apply on the SPL if an SPL is enabled, or on
the full U-Boot image otherwise.
Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
