This package has had build failures for a very long time, and these
issues have not been fixed, and it is now the number 1 build failure
reason in our autobuilders. It is time to acknowledge that the package
needs to be removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
bmaptool allows to drastically reduce the amount of data to transfer
when writing to an SD card. Example with a 544 MiB sdcard.img:
$ bmaptool create sdcard.img > sdcard.bmap
$ gzip sdcard.img
$ bmaptool copy sdcard.img.gz /dev/sdc
bmaptool: info: discovered bmap file 'sdcard.bmap'
bmaptool: info: block map format version 2.0
bmaptool: info: 139265 blocks of size 4096 (544.0 MiB), mapped 23918 blocks (93.4 MiB or 17.2%)
bmaptool: info: copying image 'sdcard.img.gz' to block device '/dev/sdc' using bmap file 'sdcard.bmap'
bmaptool: info: 100% copied
bmaptool: info: synchronizing '/dev/sdc'
bmaptool: info: copying time: 7.7s, copying speed 12.1 MiB/sec
So it means that instead of writing 544 MiB, only 93.4 MiB had to be
written.
In terms of implementation details, compared to the target bmap-tools
package, there are fewer "selects" that are needed because:
- The dependency on setuptools is not needed, because the package
uses the setuptools SETUP_TYPE, so host-python-setuptools is
already a build dependency.
- host-python and host-python3 are always built with Expat XML
support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add jh71xx-tools as a new host package, it includes a tool that allows
to recover the bootloader of JH71xx-based platforms, such as the
BeagleV.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[yann.morin.1998@free.fr:
- fix alphabetical order, spotted by Bin
- use LICENSE as license file, update license hash accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is really only for QoriQ SoCs. Also the upstream package - despite
its base name of the git repository - is "qoriq-components/rcw". Thus
rename it to a more specify package name.
Note that there are other rcw implementations for other platforms, and
each implementation only applies to that specific platform; it hus does
not make sense that there are more than one rcw enabled at the same
time; so we keep using /usr/share/rcw as the install location; this also
help backward compatibility with existing post-build scripts.
Signed-off-by: Changming Huang <jerry.huang@nxp.com>
Cc: Michael Walle <michael@walle.cc>
[yann.morin.1998@free.fr:
- rebase on master
- incorporate changes by Michael
- don't move to an 'nxp' sub-directory
- reword the legacy entry; select the new package
- expand commit log to explain why we keep installing in
host/usr/share/rcw/ (thanks to Michael for prompting that)
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Enabling package host build for abootimg so that boot images can be
created for boards which boot from this format.
Signed-off-by: Mike Frampton <mikeframpo@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Install an helper script to setup a build environment based on
Buildroot. It's useful when a developer wants to use a Buildroot
generated SDK to build an external project.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Tested-by: Michael Trimarchi <michael@amarulasolutions.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Maury Anderson <maury.anderson@collins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Curently, host-kmod has no option to enable it, because only
the kernel depends on it, and this is unconditional (because
we can't know if modules will be enabled in the kernel config).
But we're soon to add options to enable various features of
kmod, so we'll need a place where to show those features.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Lucian Buga <lucianbuga@gmail.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The asn1c is a free, open source compiler of ASN.1 specifications into C
source code.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Babeltrace 2 is a trace manipulation toolkit.
The Babeltrace 2 project offers a library with a C API, Python 3
bindings, and a command-line tool which makes it very easy for mere
mortals to view, convert, transform, and analyze traces.
See <https://babeltrace.org/> for more details.
Babeltrace 2 is a major update of Babeltrace 1 (Buildroot package
`lttng-babeltrace`). Both projects are coinstallable. Except for the
command-line tool (named `babeltrace2`), the Babeltrace 2 project is not
backward compatible with Babeltrace 1.
I'm naming this package `babeltrace2` instead of `lttng-babeltrace2`
because, although it can read LTTng traces, the two projects are
independent. All major distributions use `babeltrace2` as the
Babeltrace 2 package's name.
I'm keeping the `lttng-babeltrace` package because, as of this date, we
still add bug and security fixes from time to time, therefore the
project is not in EOL stage. Some external, custom packages could still
depend on the Babeltrace 1 library, for example.
As with `lttng-babeltrace`, you can build and install the host version
of Babeltrace 2 for the workflow where you trace the target, download
the resulting trace (or receive it during the tracing process), and then
read and analyze it with Babeltrace 2.
If you enable the `elfutils` package (`BR2_PACKAGE_ELFUTILS`), then
support for Babeltrace 2's debugging information filter component
class is enabled.
Tested with glibc, uClibc-ng, and musl.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As no package depends on the standalone cargo package, it can be
dropped.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: David Pierret <david.pierret@smile.fr>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ODB is an open-source, cross-platform, and cross-database
object-relational mapping (ORM) system for C++. It allows you to
persist C++ objects to a relational database without having to deal
with tables, columns, or SQL and without manually writing any mapping
code.
ODB supports MySQL, SQLite, PostgreSQL, Oracle, and Microsoft SQL
Server relational databases as well as C++98/03 and C++11 language
standards. It also comes with optional profiles for Boost and Qt
which allow you to seamlessly use value types, containers, and smart
pointers from these libraries in your persistent C++ classes.
This package is used for auto-generating ODB specific header files
into useable code that can be linked against a seperate libodb and a
specific libodb database library. As such, it is only needed as a
host program and is not user selectable.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Kamel: Fix incorrect odb license]
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
[Thomas: add patch fixing gcc10 build, add references to upstream
commits]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
exFAT filesystem userspace utilities
We need a patch to fix:
error: unknown type name ‘ssize_t’
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds EROFS userspace tool erofs-utils to buildroot,
which can be used to generate EROFS images.
Signed-off-by: Gao Xiang <hsiangkao@aol.com>
[yann.morin.1998@free.fr:
- add explicit --enable-lz4
- explain why autoreconf
- add DEVELOPPER entry
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
host-doxygen use std::make_unique which is a C++14 feature and so not
available with host gcc 4.8 so add a Config.in.host for doxygen and add
host gcc 4.9 dependency to host-doxygen and sigrok C++ option
Fixes:
- http://autobuild.buildroot.org/results/3ac78c5d4728287bafdfeb3a54f50eb193934b63
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the infrastructure to build the host version of systemd
* disable all optional features, they can be re-added when needed
* systemd has creative way of dealing with cross compile
we build a "normal" host systemd, but install it in $HOST_DIR
we use systemctl --root to correctly act on TARGET_DIR
* we need to adjust RPATH using patchelf because meson can't do it
correctly by itsel
The first question is: why do we use --prefix=/usr ?
systemd will store its --prefix in all the executables it generates. As
such, systemctl will have a hardcoded 'prefix', where it will manipulate
and create files/symlinks in. When called natively, this is nice and
shinny.
However, for cross-setup, that does not work obviously.
So, systemd has its tools know about the 'root' directory where this
prefix should be related to. We can call systemctl --root=$(TARGET_DIR)
and systemctl wil do the links and such in there.
However, it does so by appending its known prefix to it.
So, if we were to configure host-systemd as we usually do, with
--prefix=$(HOST_DIR), then when we would call host systemctl --root=$(TARGET_DIR)
it would look for files in $(TARGET_DIR)/$(HOST_DIR), which is wrong.
Calling the host systemctl without --root is also wrong, as it would look for
files in $(HOST_DIR)
So, there is no satisfying official support for this case.
The trick then, is to configure systemd with the prefix it would expect
at runtime (on the target!), that is with /usr, but install out-of-tree.
That was it for the first part of the question: why do we use --prefix.
Now, the second question is: why do we need to muck up with the rpath
after installation?
Well, this boils down to meson (and not systemd itself). When it
installs executables, meson will handily insert whatever rpath the
package meson.build would tell it to use. systemd installs libs in
$(prefix)/lib/systemd and has a NEEDED to those libs, so it uses an
RPATH to find those libs, and meson does inject that RPATH into the
installed executables.
However, we Buildroot also want to insert our own RPATH, because systemd
uses util-linux' libs and libcap, installed in $(HOST_DIR), so it needs
our RPATH.
However, meson can not extend the RPATH from the LDFLAGS in the
environment; meson can only set the RPATH from what it knows about from
the package's meson.build.
That, in addition to the --prefix=/usr issue above, means that the
executables installed by host-systemd have an RPATH set to
/usr/lib/systemd. when we would want it to be set to
$(HOST_DIR)/lib:$(HOST_DIR)/lib/systemd
That's what is done in the post-install hook: set the RPATH to the
appropriate values.
Signed-off-by: Jérémy Rosen <jeremy.rosen@smile.fr>
[yann.morin.1998@free.fr:
- reformatting in commit log
- declare host variant after target variant
- simplify comments
- slight reordering of variable (HOST_SYSTEMD_NINJA_ENV moved)
- reformatting for mutli-line variable (HOST_SYSTEMD_HOST_TOOLS)
- don't split HOST_SYSTEMD_CONF_OPTS in two sets
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A C++ library for interacting with sd-bus and a C++ bindings generator.
The host build produces a code generation tool, sdbus++ while the
target build gives libsdbusplus.
The code generator requires host-python-pyyaml, host-python-inflection,
and host-python-mako. Since it isn't built for the target, the target
build does not require them.
The host package includes a code and documentation generation program,
which is useful for including in a buildroot SDK, even if no target
package needs it, so make it a user-selectable host package.
host-autoconf-archive is added as a dependency since configure.ac
uses the AX_PKG_CHECK_MODULES macro.
Signed-off-by: John Faith <jfaith@impinj.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
[Thomas: use host-python3 when BR2_PACKAGE_PYTHON3=y]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
eudev and systemd provide a hardware database (hwdb) as a set of
multiple files. Various other utilities may also use that database.
Those files have to be "compiled" into a binary to be useful; libudev
(and thus all utilities based on it) only use the compiled hwdb.
Compiling the hwdb is done with udevadm, using the hwdb sub-command:
udevadm hwdb --update
Provide a simple host-variant of eudev, so that we can call udevadm at
build time.
When it is configured, eudev will shoehorn its --prefix path as the base
location where the .hwdb file will be searched from, as well as where
the hwdb.bin will be generated in. This means that with the usual
--prefix=$(HOST_DIR), it would look into there.
udevadm also accepts a --root=/path option at runtime, which prepends
/path to all the paths it uses to find and generate files.
Obviously, combining --root=$(TARGET_DIR) and --prefix=$(HOST_DIR) would
not do what we want: all files would be searched for, and generated, in
$(HOST_DIR)$(TARGET_DIR)/ . Avoiding use of --root would not help much
either, as files would still searched in $(HOST_DIR) (we could use a
trick to copy files there, generate and then move the hwdb.bin, but
that's not nice).
However, since we only need udevadm, and since udevadm has no internal
and no external dependency, we can use a less dirty trick and configure
host-eudev with --prefix=/usr (and similar for the other paths), manually
copy udevadm to HOST_DIR, and then use --root when calling it.
Then, we get a udevadm that can read files from, and generate files into
$(TARGET_DIR). We register a target-finalize hook to generate the
hwdb.bin, so that any pakage may install its .hwdb files (currently only
eudev and systemd do, but other packages might (e.g. sane is known to do
so on standard desktop distros))
The *.hwdb source files consume a lot of space, roughly the same as the
generated database, i.e. ~8MiB as of today, and they are totally useless
on the target; only the generated hwdb.bin is useful. So we want to get
rid of them.
However, we also want to be able to complete a build (e.g. make
foo-reinstall to reinstall more hwdb files), so we don't want to
irremediably lose them. As such, we register a pre-rootfs-cmd hook, that
removes them just before assembling the filesystems, when we're only
using a copy of the target directory.
Note that this is the first host package to register a target-finalize
hook, and also the first to register a pre-rootfs-cmd hook. This avoids
duplicating these hooks logic in both eudev and systemd.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some python scripts may be ran in the custom scripts a user can define
in the config. Allow the user to enable host-python explicitly.
If any of those require ssl, they will fail with no possible fix.
Add an option to enable openssl as well. This is made optional because
openssl significantly increases the build time.
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some python scripts may be ran in the custom scripts a user can define
in the config. Allow the user to enable host-python3 explicitly.
If any of those require ssl, they will fail with no possible fix.
Add an option to enable openssl as well. This is made optional because
openssl significantly increases the build time.
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
lld can be used by external packages or by setting BR2_TARGET_LDFLAGS
(though a dependency is missing to make the latter really work). Future
patches will improve the integration in the build.
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This can be useful for Python scripts running on a host machine that
need to connect to a bus on a remote device, e.g. test scripts.
The target dbus-python depends on dbus instead of selecting it because
dbus has dependencies that check that it is supported. Using 'select'
would override those dependencies. For host-dbus, there are no such
checks -- it's assumed the host has the features neeeded to run dbus, so
it is okay to just depend on host-dbus.
The pyexpat dependency is not needed, as it is forced on for
host-python.
Signed-off-by: Brent Generous <bgenerous@impinj.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Sometimes, it is required to call imagemagick from a post-build script
or the likes, so we have to allow the user to enable the host variant
for imagemagick.
Update the linux package to select the host variant now.
Signed-off-by: "Yann E. MORIN" <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Library for using PKCS#11, which includes an engine for OpenSSL that
lets it use PKCS#11 modules. Which is really what this package is
about, not that libp11 library itself, which has no users outside the
of OpenSSL engine.
If p11-kit is enabled, configure the engine to use that as the default
PKCS#11 module. That module is a sort of multiplexer that allows
multiple modules to be used at once, so it makes sense to use it even
if there are other modules present, e.g. softhsm2, nssckbi,
pkcs11-proxy, ykcs11, etc.
A host package is created too, with a host configuration option.
Since this a dynamically loaded module, there is no build time reason
to select it from a host package. It could be used by host openssl,
to allow host rauc to sign a software update bundle using a key from a
HSM with a PKCS#11 interface.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
[Thomas:
- add entry in DEVELOPERS file
- add missing !BR2_STATIC_LIBS dependency
- fix license information, as noticed by Frank Hunleth
- add missing dependency on host-pkgconf, needed by the configure
script to detect openssl
- explicitly pass --with-enginesdir as the value returned by
pkg-config is incorrectly prefixed by the sysroot]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mender-artifact is a host tool to generate update images
in the Mender artifact file format.
This package uses the binary archive from github because it bundles the
external dependencies.
Example usage:
$ mender-artifact write rootfs-image \
--update rootfs.ext4 \
--output-path rootfs.mender \
--artifact-name "release-v1.0.0" \
--device-type "beaglebone"
Above will generate a Mender artifact called "rootfs.mender"
containing the "rootfs.ext4" image along with meta-data.
One can read-out the meta-data with the following command:
$ mender-artifact read rootfs.mender
Mender artifact:
Name: release-v1.0.0
Format: mender
Version: 2
Signature: no signature
Compatible devices: '[beaglebone]'
Updates:
0000:
Type: rootfs-image
Files:
name: rootfs.ext4
size: 52428800
modified: 2018-08-27 09:10:55 +0200 CEST
checksum: e70b113fb0964a810a3043586eb4fc1c48e684ba78b02ba65fead4aa3e540d87
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package adds NXP Layerscape and QoriQ reset config word
(RCW) / pre-bootloader (PBL) generation support.
The RCW is used to setup clocking and IO allocations and then launches
the next stage of boot (usually u-boot).
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This tool is used to send commands to imx6 based hardware using NXP's
UTP protocol.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Vincent Prince <vincent.prince.fr@gmail.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Having a host variant of this package is useful to create f2fs
filesystem images.
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
[Thomas: add explicit --without-blkid and --without-selinux options,
following the review from Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The patch adds the package/swig/Config.in.host file and adds this path
to the package/Config.in.host file.
Signed-off-by: Matt Flax <flatmax@flatmax.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds a new option to build the btrfs toolset for the host, which
can be useful to prepare a btrfs filesystem image for the target.
Signed-off-by: Robert J. Heywood <robert.heywood@codethink.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds host-checksec package support. This tool provides a
script to offline check the properties of a security hardened elf file.
REF: https://github.com/slimm609/checksec.sh
Signed-off-by: Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas: add entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The zstd (de)compression tool may be used in post-image scripts to
compress certain elements of the final image.
In order to allow that, make host-zstd selectable in the 'Host
utilities' menu, and build the binary in addition to the library.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package add support for imx-mkimage for iMX8M.
Currently the only hardware it's tested for.
Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
Signed-off-by: Christopher Dahlberg <crille.dahlberg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Post-build/image scripts may need to extract information from Microsoft
Excel (tm) spreadsheet files.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[Arnout: add package/Config.in.host entry]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This new package provides Cargo, the Rust official package manager.
Cargo is written in Rust and uses Cargo as its build system. It also
depends on other Rust packages.
Normally, a previously installed version of Cargo would be used to:
1. Fetch the dependencies.
2. Build the new version of Cargo, using the available Rust compiler.
But the fetching step prevents offline builds. So instead two features
of Cargo are leveraged: vendoring [1] and local registry.
First, a tarball of the build dependencies generated using `cargo
vendor` is fetched along with Cargo source code.
Then, the build process is as follows:
1. The tarball of the build dependencies is uncompressed in a local
registry.
2. A snapshot of Cargo, provided by cargo-bin, builds the final
version of Cargo.
3. A configuration file telling Cargo how to cross-compile programs for
the target is generated and installed.
Currently, only the host variant is provided.
[1] https://github.com/alexcrichton/cargo-vendor
[Peter: use src.fedoraproject.org, fix comment]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The compiler for the Rust programming language is called rustc.
There is only one reference implementation for it, based on LLVM, from
the Rust project [1]. It can generate code for various architectures so
it can be labeled as a cross-compiler. But, as for GCC, building it
from source takes time.
So it would be sensible to have at least one package which provides it
as a pre-built version, fetched from the upstream project. Later another
package can be added, to build it from source code.
In addition to the compiler, the standard library for the host and/or
the target should also be fetched/built.
So, add a virtual package named rustc to enable support for multiple
providers.
Currently, only the host variant will be available to allow the user to
cross-compile Rust programs for the target.
[1] http://rust-lang.org
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For E.G. post-build / post-image scripts as it generally cannot be expected
to be available on the build host and/or there are some differences in
behaviour between gnupg 1.x / 2.x.
Provide gnupg 1.x instead of 2.x, as it is simpler to build (less
dependencies) and easier to use in post-build / post-image scripts (E.G. no
gpg-agent that keeps running in the background).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building the target google-breakpad requires building the host variant
of google-breakpad. Just like the target google-breakpad only supports
a limited number of architectures, it is the same for the host
google-breakpad.
We therefore introduce a
BR2_PACKAGE_HOST_GOOGLE_BREAKPAD_ARCH_SUPPORTS option that is used
where necessary to prevent the user from choosing Google Breakpad when
building on unsupported host platforms.
Fixes:
http://autobuild.buildroot.net/results/c7c04483508f9e4d629efa54571afeb1feaa5f73/
(build on a powerpc64le machine)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
go-bootstrap is a host package that builds a first stage Go compiler,
later used to build the final Go compiler. However, this first stage
compiler only supports building on x86, x86-64 and arm as host
architectures, so we need to add the relevant architecture
dependencies to avoid having go-bootstrap built on other unsupported
platforms.
We do this by introducing BR2_PACKAGE_HOST_GO_BOOTSTRAP_ARCH_SUPPORTS
in a new package/go-bootstrap/Config.in.host file. This option is then
used by BR2_PACKAGE_HOST_GO_ARCH_SUPPORTS to make sure we can't enable
Go packages when the host architecture doesn't allow building the Go
compiler.
Fixes:
http://autobuild.buildroot.net/results/cbd419c6ab6fa8a6d18dc137c91f895867e53b8a/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While currently there is no in-tree Buildroot package which depends on
host-python-six, it can be needed to build external packages.
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Tested-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
With the addition of the sdk support it may be interesting to build
host-cmake even though no packages need it, so expose it in menuconfig.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
With the addition of the sdk support it may be interesting to build
host-pkgconf even though no packages need it, so expose it in menuconfig.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that we use mkfs to generate ext2/3/4 filesystem image by calling
mkfs directly from fs/ext2/ext2.mk, we can remove this package.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
RAUC is the Robust Auto-Update Controller developed by the folks at
Pengutronix. It supports updating embedded systems from the network
(ex: HawkBit) or from a disk and provides a d-bus interface.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While currently there is no in-tree Buildroot package which depends on
host-python-lxml, we (DATACOM) have some proprietary modules that use it
in their test scripts.
We tested python-lxml as host package and confirmed that it builds and
works correctly. Someone else might require it, so we are proposing its
inclusion.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas: add Config.in.host entry.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
