Parallelizes locale generation based on `BR2_JLEVEL` setting.
Locale generation always runs during the finalize stage and can consume
a significant amount of time. Parallelizing it greatly reduces that time
on multi-core machines.
To parallelize it, we first invoke `localedef` for every locale in
parallel with the `--no-archive` option. This creates the intermediate
locale data instead of writing to the finally archive directly.
Then, we invoke `localedef` again once to create the archive from the
intermediate compiled locale data files.
We have to do it this way because `localedef` does not do any locking
when writing to the archive file, so calling it without `--no-archive`
concurrently could result in a corrupt archive file or an archive file
that is missing some locales.
While we're at it, make two additional improvements:
- Remove locale-archive before adding to it. Otherwise, repeated
applications of target-finalize will keep on growing the file.
- Sort the locales when creating locale-archive so its contents are
reproducible.
We use `find` to collect the installed locales rather than LOCALES. This
makes it possible for something else (skeleton, overlay, custom package)
to create and install additional locales and still have them added to
locale-archive.
Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com>
[Arnout:
- Remove -j$(PARALLEL_JOBS), it's already part of $(MAKE)
- Remove HOST_DIR, TARGET_DIR, STAGING_DIR, they're already exported
- Extend commit message
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Like commit 1f187371d0 for cpe-updates data, also remove pkg-stats
data on clean.
Unlike the rest, those are not nicely located in a directory of their
own, and have no variable name associated with them, so we just need
to repeat their names in the clean rule.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit fd7312940a (Makefile: add new missing-cpe target) added the
rule to generate a set of files to update the NVD.
For an in-tree build, 'make clean' remove the output directory, so
those files are removed. But for an out-of-tree build, the output
directory is not removed, so those files still linger around after a
clean.
Explicitly remove them on clean, to cater for both cases.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Matthew Weber <matthew.weber@collins.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
It invokes the recently introduced gen-missing-cpe script.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 7d17ae2acf (.flake8: fix check for 80/132 columns) introduced a
difference in how flake8 behaves between the automatic checks done in
the CI, where the maximum line length is 132, and the local checks,
where the maximum line length is 80.
The rationale at the time was that we recommend 80 char lines, but that
we accept 132 when it makes sense for readability.
However, this is very annoying when running flake8 locally, because of
two reasons:
1. human reviews on python scripts have not been as thorough as we did
expect; indeed, we've let a lot of long lines slip through; this
causes a lot of spurious failures that hide away the actual errors;
2. when hacking on a python script, the issues reported will not be
caused by the current changes, so the many reported failures
actually hide away the newly introduced issues.
Additionally, our 'make check-flake8' rule already enforces the 132-char
limit, and the issues reported are different than when manually running
flake8 on individual files.
Furthermore, the readability rationale for the 80-char limit is
definitely shattered by the mere rationale of allowing 132-char limit
for... readability...
We've arrived to a point where this separation is causing our checks
around flake8 to become mostly unusable and useless, as they do not
report meaningful issues, and people are no longer paying attention, and
this has caused actual issues to be introduced.
Finally, terminal emulators of today have long lifted the 80-char limit,
and are more than capable of displaying 132-char wide lines.
Switch back to using a 132-char limit.
This reverts commit 7d17ae2acf.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that pkg-stats is not just a maintainer-oriented tool, but a tool
generally useful to users, introduce a make target to run
pkg-stats. Of course, it is run with the newly introduced -c option,
which produces a pkg-stats output for just the selection of packages
of the currently defined configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Although BR2_DL_DIR is indeed a site-local setting, which does not
actually define the target system, we've had it in the tree for a
long time now, and people have been depending on it for a variety
of use-cases.
Furthermore, BR2_DL_DIR is far from the only such site-local setting,
BR2_CCACHE_DIR springs to mind, and in the less-obvious category, we
can also find BR2_JLEVEL, but also BR2_WGET, BR2_SVN, BR2_GIT et al.
as they may be tweaked to set the timeout, number of retries or so on
to work around stupid proxies. But of course, the most local site-local
setting is probably BR2_PACKAGE_OVERRIDE_FILE, with its default value
being explicitly just 'local.mk'.
Ideally, we would like to have a clear separation between the
configuration that actually defines the target system on one hand,
and the site-local settings that drive and control how the build is
performed, on the other hand. This is by far a much bigger endeavour
than just dropping BR2_DL_DIR from the saved defconfig.
This reverts commit 36edacce9c (adapted
to keep the fix from 1a7873ec98).
Closes: #13291
Note: thanks to Thomas; some phrasing above was borrowed from a
discussion with him.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Lance Fredrickson <lancethepants@gmail.com>
Cc: Sven Oliver Moll <buildroot@svol.li>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Adam Duskett <aduskett@gmail.com>
When we savedefconfig, we remove BR2_DEFCONFIG (f71a621d91, savedefconfig:
Remove BR2_DEFCONFIG from saved defconfig file) and BR2_DL_DIR (36edacce9c,
Makefile: exclude BR2_DL_DIR from savedefconfig), because their meaning
is only valid locally.
However, we were not careful to really match the exact variables, so we
could match arbitrary options.
For example, these config options would all be dropped:
BR2_DEFCONFIG="toto"
BR2_DL_DIR="titi"
BR2_PACKAGE_SABR2_DEFCONFIG="tutu"
BR2_PACKAGE_SABR2_DL_DIR=y
While the first two are indeed the ones we want to drop, the last two
are options (whatever their meaning or how poorly named they are) of the
hypothetical 'sabr2' package, and we want to keep those in a defconfig.
When cleaning the just-saved defconfig, be sure to anchor the patterns to
the beginning of the line.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Sven Oliver Moll <buildroot@svol.li>
Cc: Herve Codina <Herve.CODINA@celad.com>
Acked-by: Herve Codina <Herve.CODINA@celad.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Running "make savedefconfig" with BR2_DL_DIR set also saves that
variable, which is only useful in local context.
Signed-off-by: Sven Oliver Moll <buildroot@svol.li>
[yann.morin.1998@free.fr: wrap line]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
[yann.morin.1998@free.fr: drop supperfluous depends on s390x in choice]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Move the code to run check-flake8 into the Makefile, like we have for
check-package, so that it is easy to run locally (and not wait for
someone to report a failure from their Gitlab pipelines).
Compared to the existing check from gitlab-ci.yml, the Makefile check
differs in this respect:
- don't explicitly find *.py files: they are supposed to also be found
as a result of running 'file' on them;
- use git ls-tree instead of find: this is supopsedly faster as it
uses the index rather than readdir();
- don't output the count of warnings or errors: the output is a single
integer, which is confusing when there are errors, and even more so
when there are no, when it is simply '0';
- don't sort: the output is already stable and independent from the
locale;
- don't report the number of processed files: this information is
rather useless, and getting a hold of it would be more challenging
in this new code.
Note: ideally, we would want to use --null, --zero, or similar options,
with utilities that generates or parses a files listing. While git
ls-tree and xargs do support it, it becomes a little bit tricky to use
the --print0 option of file, and then grep in that output (it is not
undoable, but would requires replacing grep+cut with some sed trickery).
Since we do not expect our scripts names to contain funky chars (like
\n or a colon), we just hand-wave away that issue (and the old code was
doing the same assumption too).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As 18f6c26118 just did to silence the file lists commands, switch to
using $(Q) instead of a plain @, to silence the commands.
Using $(Q) will allow to debug the commands with V=1.
We keep @ for the calls to MESSAGE, though.
The commands that are not currently silenced are left as-is, and they
can be converted to being silent in a followup patch, if need be,
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 0e2be4db8a
("package/pkg-generic: make file list logic parallel build
compatible"), the commands executed at the every end of the build
to assemble the list of files installed by the different packages
are visible in the make output. They are quite noisy, and clutter
the output.
The other commands in target-finalize are also hidden using "@",
so we should also do the same for those commands. But that hurts
debuggability, so we use $(Q) (the existing '@'s can be changed
in a followup patch).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: use '$(Q)', not '@']
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
BR2_VERSION_FULL is currently defined as follows:
BR2_VERSION_FULL := $(BR2_VERSION)$(shell $(TOPDIR)/support/scripts/setlocalversion)
This BR2_VERSION_FULL value then gets used as the "VERSION" variable
in the /etc/os-release file.
The logic of "setlocalversion" is that if it is exactly on a tag, it
returns nothing.
If it is on a tag + a number of commits, then it returns only
-XYZ-gABC where XYZ is the number of commits since the last tag, and
ABC the git commit hash (these are extracted from git describe).
This output then gets concatenated to BR2_VERSION which gives
something like 2020.05 or 2020.05-00123-g5bc6a.
The issue is that when you're on a tag specific to your project, which
is not a Buildroot YYYY.MM tag, then the output of setlocalversion is
empty, and all you get as VERSION in os-release is $(BR2_VERSION)
which is not really nice. Worse, if you have another non-official
Buildroot tag between the last official Buildroot tag/version and
where you are, you will get $(BR2_VERSION)-XYZ-gABC, but XYZ will not
correspond to the number of commits since BR2_VERSION, but since the
last tag that "git describe" as found, which is clearly incorrect.
Here is an example: you're on master, "make print-version" (which
displays BR2_VERSION_FULL) will show:
$ make print-version
2020.08-git-00758-gc351877a6e
So far so good. Now, you create a tag say 5 commits "before" master,
and show BR2_VERSION_FULL again:
$ git tag -a -m "dummy tag" dummy-tag HEAD~5
$ make print-version
2020.08-git-00005-gc351877a6e
This makes you believe you are 5 commits above 2020.08, which is
absolutely wrong.
So this commit simplifies the logic of setlocalversion to simply
return what "git describe" provides, and not prepend $(BR2_VERSION) in
the main Makefile. Since official Buildroot tags match official
Buildroot version names, you get the same output when you're on an
official Buildroot tag, or some commits above a Buildroot tag. An in
other cases, you get a sensible output. The logic is also adjusted for
the Mercurial case.
In the above situation, with this commit applied, we get:
$ make print-version
dummy-tag-6-g6258cdddeb
(6 commits instead of 5 as we have this very commit applied, but at
least it's 6 commits on top of the dummy-tag)
Finally, if you're not using a version control system, setlocalversion
was already returning nothing, so in this case, the Makefile simply
sets BR2_VERSION_FULL to BR2_VERSION to preserve this behavior.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since Gitlab 12.9, Gitlab allow to trigger child pipeline with generated configuration file.
See: https://gitlab.com/gitlab-org/gitlab/-/issues/35632
This allow us to stop updating the .gitlab-ci.yml file when a
new defconfig is added to Buildroot.
Remove check-gitlab-ci.yml job since it is now uneeded.
Remove .gitlab-ci.yml make target.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
[ann.morin.1998@free.fr: manual: no longer needed to update at all]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The rule to create the staging symlink has it depend on BASE_DIR, and
the symlink is created in BASE_DIR, which means that when the symlink
is created, BASE_DIR is updated, and thus made more recent than the
symlink itself.
As a consequence, every time one runs 'make', the symlink will be older
than BASE_DIR, and so will be re-created.
Ditto for the host symlink when the user has elected to have an
out-of-tree host dir.
Fix that by changing to using an order-only dependency.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, we delete /usr/share/bash-completion when bash is not enabled.
We need to delete /etc/bash_completion.d too. For example, the jo package
installs files there:
/etc/bash_completion.d/jo.bash
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some toolchains, like the Linaro gcc7 toolchains, now install libstdc++ debug
library symbols to /lib/debug, which can be as large as the library itself.
This commit removes the extra debug content if debugging is not enabled.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When we prepare the release, we generate the manual in various formats,
so that it can be consulted locally without needing the miriads of tools
needed to generate it.
However, this creates the temporary .br2-external.* files in the output
directory, and those end up in the release tarball.
This is not a problem in practice, but is not clean.
Run 'distclean' in the output directory, to get rid of everything but
the generated documentation.
Reported-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Post-build scripts may want to do something based on the list of files
installed by a package. However, since commit
0e2be4db8a the final packages-file-lists.txt
file is only created _after_ the post-build scripts.
Move the assembly of the file lists upwards, before the post-build scripts.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
