4.20.x is not a long term support kernel, but 4.19.x is (supported until end
2020):
https://www.kernel.org/category/releases.html
With the upcoming Buildroot 2019.02 release being a LTS release, default to
4.19.x instead.
Notice: The userspace API breakage in net_stamp.h causing build failures has
now been fixed in 4.19.14 by commit e4a2ffe9029fd (net: Use
__kernel_clockid_t in uapi net_stamp.h)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: add comment in linux/Config.in and
package/linux-headers/Config.in.host so that we don't mistakenly bump
to 4.20+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds a package for 'shim', an EFI bootloader for secure
boot chain loading.
While gnu-efi supports 32bit ARM, this is currently broken in shim.
Patches to fix this have been submitted upstream but are not included
here for now.
https://github.com/rhboot/shim/pull/162
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: use BR2_PACKAGE_GNU_EFI_ARCH_SUPPORTS, add separate depends
on to exclude ARM32 build.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This will be used in packages that depend on gnu-efi, and we take this
opportunity to propagate this dependency where it was missing in
gummiboot and syslinux. In practice, it was not a problem because
gummiboot and syslinux are only available on i386 and x86-64, which is
a subset of the architectures supported by gnu-efi.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds support for StrnCat, needed by shim.
Also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pass TARGET_CONFIGURE_OPTS in the environment instead of on the make command
line, so 'CFLAGS +=' does the right thing in the Makefile without patching.
TARGET_CONFIGURE_OPTS includes TARGET_MAKE_ENV, so drop that.
This does require us to pass CROSS_COMPILE to ensure the native tools are
not used though.
Add a GNU_EFI_MAKE_OPTS and use in both the build and install steps, instead
of repeating the various arguments.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now CMAKE_SYSTEM_VERSION is properly set in toolchainfile.cmake, it is
no longer necessary to set a dummy value in azure-iot-sdk-c.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Nikita Sobolev <Nikita.Sobolev@synopsys.com>
Cc: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Quoting the CMake documentation:
When the CMAKE_SYSTEM_NAME variable is set explicitly to enable cross
compiling then the value of CMAKE_SYSTEM_VERSION must also be set
explicitly to specify the target system version.
Thus, we should also set CMAKE_SYSTEM_VERSION in toolchainfile.cmake. It
is supposed to be set to the value of `uname -r` on the target. We don't
have that exact value available (unless we build the kernel), but the
value of BR2_TOOLCHAIN_HEADERS_AT_LEAST contains the (minimum) version
of the kernel it will run on, so it should be OK for all practical
purposes.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Remove first patch (already in version) and so remove
READLINE_AUTOCONF as configure.ac is not patched anymore
- Use the new --disable-install-examples option and remove
READLINE_PURGE_EXAMPLES
- Remove READLINE_INSTALL_PC_FILE as readline.pc is installed since:
http://git.savannah.gnu.org/cgit/readline.git/commit/Makefile.in?id=8e6ccd0373d77b86ed37a9a7d232ccfea3d6670c
- Remove READLINE_INSTALL_FIXUPS_SHARED (libraries are installed with
correct rights)
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to version 1.15, libsquish can conditionally
build/install its shared library, which makes it possible to re-enable
this package for BR2_STATIC_LIBS configurations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While testing the new supertuxkart 0.10-beta1 version, the build
failed due to missing libsquash shared library.
Indeed, by default (see config file) the shared library is not build
and all symlinks created by LIBSQUISH_INSTALL_{STAGING,TARGET}_CMDS
are curently broken.
To fix that, add USE_SHARED=1 to LIBSQUISH_MAKE_ENV.
Also add a patch to allow reinstall the package.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Brings lots improvements and bug fixes, especially bug #1720[1], which
causes problems on some of our (DATACOM) products.
1. https://github.com/balabit/syslog-ng/issues/1720
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The configure option "--with-pcre-regex=$(STAGING_DIR)/usr" is broken.
PHP will prepend $(STAGING_DIR)/usr to the paths, which will cause a
failure because it won't be able to find pcre, and will then fallback to
searching for pcre2, which won't be installed.
Removing "=$(STAGING_DIR)/usr" from --with-pcre-regex fixes the issue.
Fixes:
http://autobuild.buildroot.net/results/586/586f56e8fcf2d2bbbd3bdf69b1c3befff7ce8bbf
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Tested-by: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
gnuchess is licensed under GPL-3.0+ not GPL-2.0+, also add hash for
license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a minimal RISC-V 32-bit autobuild configuration for the
internal toolchain with glibc.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
releases.nixos.org gives some weird XML pages. The upstream location is
nixos.org/releases.
This side uses HSTS, so switch to https to avoid a needless redirect.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit ec69d3820f (package/lighttpd: bump to version 1.4.52) bumped the
lighttpd version but forgot to adjust the upstream hash comment.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As xenomai release tarballs ship with a configure script, there is only a
need for autoreconfiguring when patches are applied.
The last patch was removed with git commit
de993bc23a but the AUTORECONF line remained.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The v0.1 tag is the first (and only) tag of the project, and has been
done after commit 424b706f990a9eb96dfc19cc8e54f2cd6ce5e186 that we
currently use as a valijson version.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
uClibc-ng in non-NPTL configurations doesn't implement
pthread_setname_np(). Unfortunately grpc assumes that as soon as
__GLIBC__ is defined, pthread_setname_np() is available. It is
particularly sad, because grpc build system uses CMake, so it is
trivial to do such a check.
This commit adds a patch that does just this: check for the
availability of pthread_setname_np(), and use it only if
available. The patch has been submitted upstream.
Fixes:
http://autobuild.buildroot.org/results/47991306abbcd80fb8e6baad0bd7490fa74f696c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream CHANGELOG entry for 4.3.0 lists these fixes:
- CVE-2018-18408 use-after-free in post_args (#489)
- CVE-2018-18407 heap-buffer-overflow csum_replace4 (#488)
- CVE-2018-17974 heap-buffer-overflow dlt_en10mb_encode (#486)
- CVE-2018-17580 heap-buffer-overflow fast_edit_packet (#485)
- CVE-2018-17582 heap-buffer-overflow in get_next_packet (#484)
- CVE-2018-13112 heap-buffer-overflow in get_l2len (#477 dup #408)
Drop tr_cv_libpcap_version and ac_cv_have_bpf; unused in current
configure script.
Make configure script use pcap-config to list library dependencies.
Unfortunately, pcap-config is not entirely correct, so we still need to
set the LIBS variable for static linking.
Use the smaller tar.xz archive.
Add license file hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update x11vnc from 0.9.15 to 0.9.16. For the changes, see
https://github.com/LibVNC/x11vnc/compare/0.9.15...0.9.16
Signed-off-by: Martin Kepplinger <martink@posteo.de>
[Peter: add hash for COPYING]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The hard coded -I/usr/include/efivar has been dropped from the Makefile in
commit 000eb0020c02 (Set pkg-config binary as variable) which is part of
v13, so drop the unneeded (misnamed) EFIBOOTMSR_PATCH_HEADER_PATH workaround.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes an out-of-bounds read, the parsing of some a malformed URIs and a
function that reported 1 more byte than actually needed for IPv4 address
URIs. For additional datails, see
https://github.com/uriparser/uriparser/blob/uriparser-0.9.1/ChangeLog
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following warning:
package/exempi/Config.in:14:warning: multi-line strings not supported
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
