The libav version built into the gst-ffmpeg code produces a bogus
binary on SPARC, which causes the following error of the
check-bin-arch script:
ERROR: architecture for ./usr/lib/gstreamer-0.10/libgstffmpeg.so is Sparc v8+, should be Sparc
ERROR: architecture for ./usr/lib/gstreamer-0.10/libgstpostproc.so is Sparc v8+, should be Sparc
ERROR: architecture for ./usr/lib/gstreamer-0.10/libgstffmpegscale.so is Sparc v8+, should be Sparc
The problem is the following bit of code in
gst-lib/ext/libav/configure:
elif enabled sparc; then
enabled vis && check_asm vis '"pdist %f0, %f0, %f0"' -mcpu=ultrasparc &&
add_cflags -mcpu=ultrasparc -mtune=ultrasparc
I.e, it checks if the architecture supports the pdist
instruction... but forces -mcpu to ultrasparc while doing so. So it's
like "let's see if this Ultrasparc instruction exists when I force the
compiler to think I'm using Ultrasparc", which is non-sensical. This
has been fixed later on in libav upstream:
https://git.libav.org/?p=libav.git;a=commit;h=6aa93689abe8c095cec9fa828c2dee3131008995
However, this commit cannot be backported as-is since the shell
function check_inline_asm did not exist in the old libav version
bundled in gst-ffmpeg.
Therefore, we take the simpler route of disabling the VIS
optimizations on SPARCv8 and Leon3.
Fixes:
http://autobuild.buildroot.net/results/e82d179c3d4f92ad7423693a4b1d42379a3f5411/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for LGPLv2/LGPLv2+ is LGPL-2.0/LGPL-2.0+.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/LGPLv2(\+)?/LGPL-2.0\1/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for LGPLv3/LGPLv3+ is LGPL-3.0/LGPL-3.0+.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/LGPLv3(\+)?/LGPL-3.0\1/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for LGPLv2.1/LGPLv2.1+ is LGPL-2.1/LGPL-2.1+.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/LGPLv2.1(\+)?/LGPL-2.1\1/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for GPLv3/GPLv3+ is GPL-3.0/GPL-3.0+.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv3\>/GPL-3.0/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license strings as much as possible.
SPDX short identifier for GPLv2/GPLv2+ is GPL-2.0/GPL-2.0+.
This change is done by using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv2\>/GPL-2.0/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The internal copy of libav in gst-ffmpeg does not understand the
PKG_CONFIG env variable, so it throws a line like this at the end
of its configuration:
WARNING: .../output/host/usr/bin/i686-pc-linux-gnu-pkg-config not found, library detection may fail.
This patch adds the --pkg-config to let libav know where it is.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Contrary to the ffmpeg package, the gst-ffmpeg package was only
allowing ARMv6 optimizations on ARMv6 platforms. This commit also
allows ARMv6 optimizations on ARMv7 platforms, like the ffmpeg package
does.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Instead of using the Config.in options for each individual ARM core,
use the newly introduced BR2_ARM_CPU_ARM* options, which exist per ARM
architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
change remaining occurrences of _OPT into _OPTS.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain currently doesn't build for nommu ARM and is in need of
serious work.
Problem is there are no emulation targets and real ARM(7TDMI/720T/740T)
hardware that's capable of running linux (enough memory, having a
memory controller...) is VERY rare and uses very old versions to
make it usable.
The ARM nommu focus should go into Cortex M series processors that are
obtainable at reasonable cost on modern hardware that has external
memory controllers.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 7e558aa0d8.
Now that -mtext-section-literals is specified in the xtensa ABI this fix
is no longer needed.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit 6ea49a23df (gst-ffmpeg: Use internal libav instead of external
ffmpeg) gst-ffmpge uses its internal libav. This requires the same fix for
xtensa like ffmpeg got in commit 4ec35e76b8 (ffmpeg: fix build for xtensa).
Fixes
http://autobuild.buildroot.net/results/08a/08a27891fd5336250f00e611a15ea45505985f67/.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Unless it was a group of sub-packages, packages was never regrouped by
category. multimedia/ was an exception to this rule.
This patch move packages/multimedia/ sub-directories to packages/. It
keeps two subdirectories for gstream 0.10 and gstreamer 1.X.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
