If PER_PACKAGE_DIRECTORIES=Y and using host-make package (because
BR2_FORCE_HOST_BUILD=Y or local make is too old) .stamp_dotconfig
target needs per-package/uboot/host/bin/host-make that doesn't
exist yet.
Add host-make into UBOOT_KCONFIG_DEPENDENCIES.
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
since 2021.01, tools/binman is broken.
tools/binman/control.py imports pkg_resources
the module pkg_resources is supplied by setuptools,
so this new dependency is required.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some RISC-V platforms (such as SiFive HiFive Unleashed) encapsulate
the OpenSBI firmware image inside U-Boot.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds CPE ID information for a significant number of
packages.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When using a custom git or mercurial repository for u-boot the error message
indicating a version had not been provided incorrectly stated that the URL was
missing. Update the error message to indicate that it's the version that's
missing.
Signed-off-by: Garret Kelly <garret.kelly@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add `.stm32` binary format that U-Boot generates for the trusted
configuration of STM32MP platforms.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For consistancy and dependencies between uboot and uboot-tools,
this patch migrates the script creation over in a similar way as
the env image creation.
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Migrating the support for this feature to uboot-tools to gain the
ability to build env files when BR2_TARGET_UBOOT isn't selected.
When _ENVIMAGE_SOURCE is not set, we generate a default environment.
However, this default depends on the U-Boot configuration. Therefore,
this can only be done if uboot itself is built as well, and
host-uboot-tools needs to depend on uboot.
For the same reason, the commands for creating the environment have to
be adapted a little. Take this occasion to drastically simplify them.
Note: This patch creates a circular dependency with uboot until the
similar migration patch is merged for uboot scripts
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
U-Boot must use $(BR2_MAKE) as it uses a Make feature from v4.0. We
already use $(BR2_MAKE) in the BUILD_CMDS, but the kconfig commands
still uses $(MAKE). Without this fix, building U-Boot with kconfig will
fail with the following cryptic error.
> Makefile:37: *** missing separator. Stop.
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Before now, U-Boot SPL could only load the Platform Management Unit
(PMU) by patching the board-specific pm_cfg_obj.c file into the generic
PMU firmware, but that then requires generating a new PMU firmware for
every board configuration. To fix that, Luca Ceresoli added support to
U-Boot to load the pm_cfg_obj[1].
Like the PMU firmware, we need a way to pass the PMU cfg to U-Boot
during build. U-Boot only accepts the binary format of the cfg, so we
must convert the source file with the tool provided with U-Boot.
[1] https://lucaceresoli.net/zynqmp-uboot-spl-pmufw-cfg-load/
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The HTTPS URL seems to be more reliable and quicker for download than
FTP. FTP may also be a blocked protocol on some sites and in CI/CD
setups.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-Boot versions newer than 2020.01 use Python 3.x instead of Python
2.x in various scripts.
We already had the BR2_TARGET_UBOOT_NEEDS_PYLIBFDT and
BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS options, but depending on the U-Boot
version, we now need to indicate if Python 2.x or Python 3.x should be
used.
In addition, it turns out that some U-Boot configurations need a
Python interpreter, without needing pylibfdt or pyelftools. Some of
our defconfigs were abusing the BR2_TARGET_UBOOT_NEEDS_PYLIBFDT option
to make sure a Python interpreter was built.
To solve this issue, we introduce a choice, that let the users specify
what, if any, host python version is needed. The default is 'no', to
preserve the previous behaviour, unless any of the pylibfdt or the
pyelftools options is enabled, in which case we hide the 'no' option,
and use python 2 by default. This dfault is guaranteed by the order of
options in the choice.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- explicitly make the choice a bool
- make BR2_TARGET_UBOOT_NEEDS_PYTHON a blind option
- introduce the 'no' option in the choice
- reword the commit log accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We can only know the details of the license files for known versions. For
custom, older or newer versions, the license files may change, or may be
moved around.
So, do for U-Boot as was done for ATF, linux, and linux-headers, and only
define the list of license files for the latest version.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Starting with 2020.01, uboot started using the 'undefine' make
directive, which was only introduced with make 4.0.
In the general case, we do not have a way to know if the uboot
selected by the user is older or later than 2020.01, so we have
no way to know before hand if make >= 4.0 is needed or not. As
such, we have no other option than to always require it.
So, use the existing $(BR2_MAKE_HOST_DEPENDENCY) and $(BR2_MAKE),
both of each will ensure that we do use a make that is at least 4.0.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The original UBOOT_FIXUP_LIBFDT_INCLUDE hook only works for u-boot versions
starting from v2017.11.
As older u-boot versions are still in common use today, e.g. in the
ci20_defconfig, extend the hook to cover a wider range of u-boot versions.
The main code change was proposed by Arnout Vandecappelle in [1].
Testing and comment changes were done by Thomas De Schampheleire.
Additional (build) testing done by Yann.
[1] http://lists.busybox.net/pipermail/buildroot/2019-May/251231.html
This was tested with the following defconfigs, that each excercise one
case:
----.-- No defconfig identified
2010.06 'lib/libfdt/', used to be simply 'libfdt' before upstream commit 0de71d507157...
2013.10 ci20_defconfig
2014.04 'srctree' used to be called 'SRCTREE' before upstream commit 01286329b27b27ea...
2017.05 olimex_a13_olinuxino_defconfig
2017.11 scripts/dtc/libfdt only exists since upstream commit c0e032e0090d6541549b19cc...
2018.01 mx6udoo_defconfig
2018.03 core change is equivalent to upstream commit e0d20dc1521e74b82dbd69be53a04884...
2019.10 nanopi_neo_defconfig
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[yann.morin.1998@free.fr: add the build-test results]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
It allows you to add the u-boot.itb to the list of U-Boot images that
can be created. Like the others, this one is also copied to the image
folder.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-Boot supports a number of environment variables to pass specific
information. The following patches were submitted in the past to one
some specific Config.in option to pass some of these variables:
- http://patchwork.ozlabs.org/patch/881197/ proposed an option to
pass a custom EXT_DTB= variable
- http://patchwork.ozlabs.org/patch/1018245/ proposed an option to
pass a custom DEVICE_TREE= variable
Instead of adding one Config.in option for each of those variables,
let's provide a generic mechanism to pass arbitrary variables during
U-Boot build step.
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Clemens Gruber <clemens.gruber@pqgruber.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support to extract compiled in default env
via u-boot's get_default_envs script and generate env image from it.
Signed-off-by: Denis Osterland <Denis.Osterland@diehl.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Rockchip rk3399 SOC based boards require python pyelftools library for
parsing dtb files, so lets add it as uboot dependency.
This commit introduces a new config option
BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS to achieve this.
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rockchip's rk3328 encapsulates the BL31 part of ATP but it needs
image in ELF format. This is extension to
2c4809e608
This commit introduces a BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF variable
to achieve this.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
At kconfig time, dependencies are not built, and therefore host-ccache
is not ready. Due to this, using $(HOSTCC) as the host compiler in
KCONFIG_OPTS does not work: a "make uboot-menuconfig" invocation from
a clean tree with ccache enabled fails.
This commit fixes this by using $(HOSTCC_NOCCACHE). We cannot rely on
the default value of HOSTCC passed by the kconfig-package
infrastructure, because $(UBOOT_MAKE_OPTS) also contains a HOSTCC
definition that would override the one passed by the kconfig-package
infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We already use $(MKIMAGE) instead of $(HOST_DIR)/bin/mkimage in xvisor, linux,
and cpio; use it here too.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As reported by Jeff Wittrock in bug #11396, the U-Boot environment
image checksum is invalid for big endian targets, because the test on
the BR2_ENDIAN Config.in option doesn't take into account that it is
double quoted.
The fix was provided by Jeff himself on bugzilla.
Fixes bug #11396.
Reported-by: Jeff Wittrock <jwittrock@faultrecorder.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When using the legacy buildsystem, the kconfig parser may still be used,
as reported by Thomas:
>>> uboot 2018.09 Configuring
...]
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
YACC scripts/kconfig/zconf.tab.c
bin/sh: 1: bison: not found
ake[3]: *** [scripts/kconfig/zconf.tab.c] Error 127
ake[3]: *** Waiting for unfinished jobs....
LEX scripts/kconfig/zconf.lex.c
bin/sh: 1: flex: not found
However, in that case, the kconfig parser is only generated during the
'configure' step, so we can add bison/flex as standard dependencies.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-Boot fails to build in a GitLab CI context because the kconfig-package
build stage is unable to find bison or flex even though they are
installed in HOST_DIR.
To fix this, set UBOOT_MAKE_ENV so that UBOOT_KCONFIG_MAKE uses the
correct PATH.
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Recent U-Boot no longer ship the flex/bison generated kconfig parser, as
of commit e91610da7c8a9fe42f3e5a75f06c3d1a0cb5f815 (kconfig: re-sync
with Linux 4.17-rc4).
So, add the conditional kconfig dependencies, as we just did for the
kernel.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some U-Boot configurations use lzop, which may not be available on the
build machine since it's not a mandatory dependency of Buildroot.
To solve this, a new option BR2_TARGET_UBOOT_NEEDS_LZOP is introduced,
and handled in a similar way to the existing
BR2_TARGET_UBOOT_NEEDS_OPENSSL option.
This fixes the build of the dra7xx_evm U-Boot defconfig as of U-Boot
2018.07, on a build machine without lzop installed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-Boot SPL configures pinmuxes, clocks and other low-level devices. On
the Xilinx ZynqMP SoCs the code to do this resides in a file called
psu_init_gpl.c which is initially generated by the Xilinx development
tools. Add an option to pass these files from the outside (e.g. in the
board files).
For this to work properly, a patch to U-Boot is needed. However this
patch must be applied by each defconfig using
BR2_TARGET_UBOOT_ZYNQMP_PSU_INIT_DIR. If it were in boot/uboot/ to be
applied unconditionally, it would break the build for configs using a
U-Boot version where the patch is already applied.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Joel Carlson <joelsoncarl@gmail.com>
Reviewed-by: Joel Carlson <JoelsonCarl@gmail.com>
Tested-by: Joel Carlson <JoelsonCarl@gmail.com>
[Thomas: add comment about U-Boot version requirements to use this
option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In order to boot on the Xilinx ZynqMP SoCs, U-Boot SPL requires a
recent PMU firmware loaded. Instruct U-Boot to add pmufw.bin to the
boot.bin file together with U-Boot SPL, and the boot ROM will load
both.
For this to work properly, a patch to U-Boot is needed. However this
patch must be applied by each defconfig that wishes to use
BR2_TARGET_UBOOT_ZYNQMP_PMUFW. If it were in boot/uboot/ to be applied
unconditionally, it would break the build for configs using a U-Boot
version higher than 2018.7-rc1 where the patch is already applied.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Joel Carlson <joelsoncarl@gmail.com>
Reviewed-by: Joel Carlson <JoelsonCarl@gmail.com>
Tested-by: Joel Carlson <JoelsonCarl@gmail.com>
[Thomas:
- indicate that this feature requires U-Boot 2018.07, since commit
c7df098a71e05dc81cee818747759e8060b59626 is needed.
- define UBOOT_ZYNQMP_KCONFIG_PMUFW only once, and instead use a
variable named UBOOT_ZYNQMP_PMUFW_PATH to store the path to the PMU
firmware]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some i.MX boards which use device tree to describe the hardware
for U-Boot generate a u-boot-dtb.imx binary.
Introduce the BR2_TARGET_UBOOT_FORMAT_DTB_IMX option to
handle such case.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
So the host ncurses includes and library are used instead of a mix of both,
causing corrupted characters. Similar to the linux fix in commit
6d3d09e232 (linux: don't override HOSTCC for kconfig), except that we
pass the linker flags in HOSTLDFLAGS.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use only one space before backslash.
Indent with tabs.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The change in commit bf73334232 only works
for newer uboot source trees. Add a check that scripts/dtc/libfdt
directory exists before making this change.
[Peter: add comment explaining why]
Signed-off-by: Stefan Becker <chemobejk@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When libfdt-devel is installed system-wide, the build of U-Boot host
programs currently fails with lots of:
HOSTCC tools/aisimage.o
In file included from tools/../include/../lib/libfdt/libfdt.h:10:0,
from tools/../include/libfdt.h:1,
from tools/fdt_host.h:11,
from tools/imagetool.h:24,
from tools/aisimage.c:8:
/usr/include/libfdt_env.h:70:30: error: conflicting types for ‘fdt64_t’
typedef uint64_t FDT_BITWISE fdt64_t;
^~~~~~~
In file included from <command-line>:0:0:
././include/libfdt_env.h:19:16: note: previous declaration of ‘fdt64_t’ was here
typedef __be64 fdt64_t;
^~~~~~~
In file included from ././include/libfdt_env.h:12:0,
from <command-line>:0:
/usr/include/libfdt_env.h:90:24: error: expected ‘)’ before ‘x’
static inline uint32_t fdt32_to_cpu(fdt32_t x)
^
This commit adds a fixup in the U-Boot code to fix this problem. The
fixup is equivalent to applying upstream commit
http://git.denx.de/?p=u-boot.git;a=commitdiff;h=e0d20dc1521e74b82dbd69be53a048847798a90a,
but we can't use a patch for the uboot package, since people are using
arbitrary versions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit baae5156ce (uboot: use local fdt headers) changed the uboot logic
to pass the host include directories with -idirafter instead of -I, so
include files local to u-boot would be preferred over host includes.
This unfortunately breaks configurations using
BR2_TARGET_UBOOT_NEEDS_OPENSSL on hosts with incompatible openssl headers
installed in the system default include directories as explained here:
http://lists.busybox.net/pipermail/buildroot/2018-March/214651.html
The problem is that -idirafter directories gets added to the very end of the
search order, AFTER the system default directories.
Instead use -isystem which causes the directories to be added after -I but
before the system default directories. With this in place, the include
directories of u-boot will first be scanned, followed by the host includes
and finally the system default include directories.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 3a6573ccee.
It is no longer necessary after solving the problem differently.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
After commit b8c3e94173 ("package/dtc: qemu system build need libfdt")
changed the dtc install target from 'install-bin' to 'install', uboot
compilation failures occurred because libfdt related headers were now
suddenly taken from output/host/include rather than from the uboot sources
itself.
Commit 3a6573ccee ("uboot: use local libfdt.h") solved this by patching
one specific uboot source file, tools/fdtgrep.c, to replace '<...>'-style
includes by '"..."'-style includes.
However, depending on the uboot version, this may not be enough: there may
be other references to fdt header files. In particular taking into account
that it is not uncommon to have vendor-provided uboot trees which have
custom changes.
The root of the problem is that the uboot.mk file passes the host compiler
as follows:
UBOOT_MAKE_OPTS += \
...
HOSTCC="$(HOSTCC) $(HOST_CFLAGS)" \
...
where HOST_CFLAGS contains the string '-I$(HOST_DIR)/include'
The uboot makefiles then use constructs of the form:
$(CC) $(CPPFLAGS) $(CFLAGS) .....
where CPPFLAGS may contain -I references pointing to local directories.
On the expanded compiler command-line, Buildroot's '-I$(HOST_DIR)/include'
is thus present _before_ any -I to local directories, and thus takes
precedence. And that becomes a problem for header files present both
locally as in the Buildroot host directory, which is the case for libfdt.
To fix this problem without having to patch u-boot sources, use '-idirafter'
rather than '-I' to pass the Buildroot host include directory. '-idirafter'
is basically the same thing, but adds the specified directory at the end
of the include precedence chain, rather than at the beginning.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since 0542bb79e8 (uboot: Support multiple environment source files),
missing user-supplied environment source files is no longer detected.
This is because we cat them all, and feed the concatenation to the stdin
of mkenvimage. So, if one source file is missing, the cat exits in error,
but the compound command exits with the exit code of the last command,
which is that of mkenvimage, which happens to be happy with whatever it
is fed on its stdin, even is empty.
We fix that by creating a temporary file, that we even leave afterward
for the user to inspect.
We also move it out of the _CMDS block and into a macro of its own, so
that it is easier to write and maintain.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Cam Hutchison <camh@xdna.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some ARM64 platforms (such as Allwinner A64/H5) have a boot process
where U-Boot encapsulates the BL31 part of the ARM trusted
firmware. For such platforms, we need to build ATF before U-Boot, and
pass a BL31 variable pointing to ATF bl31.bin to the U-Boot build
process.
This commit introduces a BR2_TARGET_UBOOT_NEEDS_ATF_BL31 variable to
achieve this.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas:
- Rename option to BR2_TARGET_UBOOT_NEEDS_ATF_BL31
- Drop changes to arm-trusted-firmware.mk, they are taken care of by
previous commits.
- Improve Config.in help text
- Add missing dependency on arm-trusted-firmware when
BR2_TARGET_UBOOT_NEEDS_ATF_BL31 is enabled.
- Use bl31.bin from $(BINARIES_DIR) instead of taking it from ATF's
build dir.]
[Peter: depend on toplevel atf option and select bl31 option. Ensure it
cannot be enabled together with ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33
as that would cause circular dependencies]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use of libfdt.h by u-boot is currently using
the <system-path>.
Jan submitted the following upstream
https://patchwork.ozlabs.org/patch/833760/
Resolves a failure like this one observed on uboot-tools
http://autobuild.buildroot.net/results/347cde4b5c0e6ca76d354396385be4ec1294da73
[Peter: only sed if file exists]
CC: Jan Kundrát <jan.kundrat@cesnet.cz>
CC: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
U-Boot nowadays also uses kconfig, so we can handle config fragments like we
do for barebox/busybox/linux.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a new config option BR2_TARGET_UBOOT_NEEDS_PYLIBFDT for U-Boot
targets, like sunxi, needing the Python libfdt library.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas: drop bogus selects on BR2_PACKAGE_HOST_{PYTHON,SWIG}.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Xtensa core configuration must be added to U-Boot before it can be
built for that xtensa CPU variant. Extract configuration files from the
xtensa overlay as is done for other packages that need to be configured
for a specific xtensa core.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/bin' | xargs sed -i 's%$(HOST_DIR)/usr/bin%$(HOST_DIR)/bin%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
