Building with libgcrypt fails since the addition of the package in
commit fbff7d7289:
checking for sparc64-buildroot-linux-gnu-libgcrypt-config... no
checking for libgcrypt-config... no
checking for LIBGCRYPT - version >= 1.5.0... no
configure: error: The selected crypto backend library is not available.
Fix this build failure by helping usbguard to find libgcrypt-config
Fixes:
- http://autobuild.buildroot.org/results/4c19e50a2a5308cb31a62f1b4b538a30353022bb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Don't pass --disable-seccomp and --disable-systemd unconditionally
While at it, also add a space and a new line when needed, and split
the initial CONF_OPTS assignment to have one option per line.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The build of gesftserver in an environment without Python fails with:
checking for Python 2.4 or better... configure: error: cannot find Python 2.4 or better
However, it turns out that Python is only needed for tests, which we
don't run/use in Buildroot, so we can safely build gesftpserver
without Python.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
resiprocate security backend assumes that if openssl is enabled that
it provides DES support. However DES support in openssl has become
optional since commit a83d418 ("package/libopenssl: add option to
enable some features").
Select openssl DES support in wpa_supplicant Kconfig to avoid build
failures.
Fixes:
http://autobuild.buildroot.net/results/f7def0d5706f9e6ab97accc4eaa5f512a11bcb4c
Signed-off-by: Ryan Barnett <ryan.barnett@collins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: check the two files are identical]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch implements a simple test in which a dummy file system image
is created, then `bmaptool create` and `bmaptool copy` are used to copy
it to another file.
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
[Thomas: several reworks, add myself to DEVELOPERS]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: check the two files are identical]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The pre-built vexpress kernel used by the testing infrastructure is a
4.0.0 kernel, which is getting old to be used with reasonably recent
toolchains.
This commit updates the pre-built kernels for both the versatile and
vexpress machines to 5.10.7 (they have already been put online).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
bmaptool allows to drastically reduce the amount of data to transfer
when writing to an SD card. Example with a 544 MiB sdcard.img:
$ bmaptool create sdcard.img > sdcard.bmap
$ gzip sdcard.img
$ bmaptool copy sdcard.img.gz /dev/sdc
bmaptool: info: discovered bmap file 'sdcard.bmap'
bmaptool: info: block map format version 2.0
bmaptool: info: 139265 blocks of size 4096 (544.0 MiB), mapped 23918 blocks (93.4 MiB or 17.2%)
bmaptool: info: copying image 'sdcard.img.gz' to block device '/dev/sdc' using bmap file 'sdcard.bmap'
bmaptool: info: 100% copied
bmaptool: info: synchronizing '/dev/sdc'
bmaptool: info: copying time: 7.7s, copying speed 12.1 MiB/sec
So it means that instead of writing 544 MiB, only 93.4 MiB had to be
written.
In terms of implementation details, compared to the target bmap-tools
package, there are fewer "selects" that are needed because:
- The dependency on setuptools is not needed, because the package
uses the setuptools SETUP_TYPE, so host-python-setuptools is
already a build dependency.
- host-python and host-python3 are always built with Expat XML
support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
[Thomas: numerous reworks, add myself in DEVELOPERS]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The br-arm-internal-glibc.config is generally used as a configuration
to test the bleeding edge versions of components. However, it has been
lagging behind somewhat, so let's bring it up-to-date:
- Binutils 2.36.x
- GCC 11.x
Let the fun begin in the autobuilders!
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We backport an upstream patch that fixes the loading of the native
library by the FFI logic. Without this, "import augeas" doesn't work
as it goes into the ctypes.utils.find_library() logic that tries to
use a compiler on the target to find the augeas native library.
Based on initial work from Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is to make sure that host packages that depend on `host-gawk` and that use
`awk` end up using `gawk`, instead of the `awk` symlink installed on the host
system.
On recent Debian-based distributions, `awk` is still symlinked to `mawk` [1].
[1] https://bugs.launchpad.net/ubuntu/+source/mawk/+bug/1841654
Signed-off-by: Hubert Lacote <hubert.lacote@youview.com>
Co-authored-by: Hubert Lacote <hubert.lacote@youview.com>
Co-authored-by: Vicente Olivert Riera <vincent.olivert.riera@youview.com>
[yann.morin.1998@free.fr: move after the target symlink hook]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Release note:
https://forums.openvpn.net/viewtopic.php?f=20&t=32497
CVE-2021-3606 fixed by this release is only relevant for Windows.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 04a0094f0e (configs/stm32f469_disco: fix kernel bootup) changed
the defconfig to build a vfat image, but forgot to add dosfstools/mtools
host utilities needed for this.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From the release notes:
================================================================================
Redis 6.2.4 Released Tue July 1 12:00:00 IST 2021
================================================================================
Upgrade urgency: SECURITY, Contains fixes to security issues that affect
authenticated client connections. MODERATE otherwise.
Fix integer overflow in STRALGO LCS (CVE-2021-32625)
Read the whole release note on:
https://github.com/redis/redis/blob/6.2.4/00-RELEASENOTES
Signed-off-by: Titouan Christophe <titouanchristophe@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Versions 2.0.11 and 1.6.15 of Mosquitto has been released.
These are a security and bugfix releases.
Read the full announcement on the blog:
https://mosquitto.org/blog/2021/06/version-2-0-11-released/
Signed-off-by: Titouan Christophe <titouanchristophe@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Django 3.2.4 fixes two security issues and several bugs in 3.2.3.
- CVE-2021-33203: Potential directory traversal via ``admindocs``
- CVE-2021-33571: Possible indeterminate SSRF, RFI, and LFI attacks
since validators accepted leading zeros in IPv4 addresses
https://github.com/django/django/blob/3.2.4/docs/releases/3.2.4.txt
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2021-22222: Infinite loop in DVB-S2-BB dissector in Wireshark
3.4.0 to 3.4.5 allows denial of service via packet injection or crafted
capture file
https://www.wireshark.org/security/wnpa-sec-2021-05.html
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libressl defaults to $prefix/etc/ssl for its "openssldir" setting, E.G.
the location where configuration files and certificates are searched:
openssl version -d
OPENSSLDIR: "/usr/etc/ssl"
Change it to /etc/ssl so it matches openssl and the expectations of packages
dealing with certificates (ca-certificates, libcurl, p11-kit)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also, since tinyproxy no longer uses a2x, remove its explicit disabling.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even if gcc 9.x is still maintained for some time (gcc 9.5 will be the
last), switch to gcc 10.x since it has been released since 2020-05-07
and gcc 11.x is available since 2021-04-27.
We have been having toolchains in the autobuilders with gcc 10.x since
mid-January 2021, so the vast majority of the problems should have
already been solved.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch allows to use an external toolchain based on gcc 11.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This new symbol will be used by architectures introduced with gcc 11.
[1] https://gcc.gnu.org/gcc-11/changes.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In order to add gcc 11 support for internal and external toolchain in
follow-up commits, introduce BR2_TOOLCHAIN_GCC_AT_LEAST_11 symbol.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
gcc-11 warns about what appears to be an out-of-range array access but
stop the build due to -Werror added to cflags:
arch/sparc/kernel/mdesc.c: In function 'mdesc_node_by_name':
arch/sparc/kernel/mdesc.c:647:22: error: 'strcmp' reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
647 | if (!strcmp(names + ep[ret].name_offset, name))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/sparc/kernel/mdesc.c:77:33: note: at offset 16 into source object 'mdesc' of size 16
77 | struct mdesc_hdr mdesc;
| ^~~~~
arch/sparc/kernel/mdesc.c: In function 'mdesc_get_property':
arch/sparc/kernel/mdesc.c:692:22: error: 'strcmp' reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
692 | if (!strcmp(names + ep->name_offset, name)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/sparc/kernel/mdesc.c:77:33: note: at offset 16 into source object 'mdesc' of size 16
77 | struct mdesc_hdr mdesc;
| ^~~~~
arch/sparc/kernel/mdesc.c: In function 'mdesc_next_arc':
arch/sparc/kernel/mdesc.c:719:21: error: 'strcmp' reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
719 | if (strcmp(names + ep->name_offset, arc_type))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/sparc/kernel/mdesc.c:77:33: note: at offset 16 into source object 'mdesc' of size 16
77 | struct mdesc_hdr mdesc;
| ^~~~~
cc1: all warnings being treated as errors
The issue was initially reported to gcc [1] where it was analized.
As suggested, change the struct mdesc_elem * accesses from the end
of mdesc to those from the beginning of the data array.
Update the prototype of node_block(), name_block() and data_block()
since the code really seems to want to do is to compute the address
somewhere into the chunk pointed to by hp.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100262
Upstream status: Pending
https://www.spinics.net/lists/sparclinux/msg26385.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This version change does not include functional changes over 1.9.92, but
it is slated as stable (hence the even second version number). Release
notes:
https://wpewebkit.org/release/wpebackend-fdo-1.10.0.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This minor release fixes a build issue when Meson is running under
a version of Python older than 3.6; release notes:
https://wpewebkit.org/release/libwpe-1.10.1.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Always disable tls_check to avoid the following build failure since bump to
version 2.72.0 in commit 8e5f7f1cfc:
../output-1/build/libsoup-2.72.0/meson.build:184:4: ERROR: Can not run test applications in this cross environment.
Indeed, tls_check will run code since
5c45253243
That is the only thing that this option does: it runs code to check that
libgio is built with TLS support.
While at it, also drop glib-networking build-time dependency
Also mark gnutls as a runtime dependency (it already was used as such).
Fixes:
- http://autobuild.buildroot.org/results/9e539dc7185cfb81f18438dd36357cb49ef23a5a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
From this version, tests can be disabled, so we pass
"tests=false" as a Meson option.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Disable -Werror to avoid the following build failure with -DNDEBUG
raised since commit 5a8c50fe05
/srv/storage/autobuild/run/instance-2/output-1/build/openswan-3.0.0/programs/rsasigkey/rsasigkey.c:524:6: error: variable 'success' set but not used [-Werror=unused-but-set-variable]
524 | int success;
| ^~~~~~~
Fixes:
- http://autobuild.buildroot.org/results/327a0f2b8f0c51bcbb3edb1c3671870d593e93b9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The patch introduced in commit
uses "defined(HAVE_SYS_AUXV_H)". However, ffmpeg configure is not GNU
autoconf, and it defines the symbol to 0 when not found. Use
HAVE_SYS_AUXV_H without defined() instead.
Fixes:
http://autobuild.buildroot.net/results/da0/da03909291e97c525eb1f53dfc743a1897f59d6e/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop 0002-meson.build-fix-build-with-uclibc-ng.patch which is not needed
since 0dda1a44a0 which has been merged in
master in commit 8d07baab43
While at it, renumber
0002-meson-fix-getrandom-detection-for-uclibc.patch to
0001-meson-fix-getrandom-detection-for-uclibc.patch (patch number was
wrong since its addition in commit
b003cb5d16) and also renumber remaining
patch
Fixes:
- http://autobuild.buildroot.org/results/4d442c61b137ca1bd2dd32c6802ff0251d39e7a5
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a dependency on wchar as both icu and libunistring needs wchar
Fixes:
- http://autobuild.buildroot.org/results/704d8e6f8b78015180e5b12c132495425637430a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
