While the kernel is built for the target, the build may need various host
libraries depending on config (and kernel version), so use HOST_MAKE_ENV
instead of TARGET_MAKE_ENV.
In particular, this ensures that our host-pkgconf will look for host
libraries and not target ones.
Fixes building scripts/dtc for Buildroot configurations enabling libyaml and
host-pkgconf for kernels after commit 067c650c45 (dtc: Use pkg-config to
locate libyaml).
With this enabled, we can drop the PKG_CONFIG_* variables for the
_NEEDS_HOST_LIBELF conditional, as those are included in HOST_MAKE_ENV.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When 'make' includes a new Makefile, it appends its path to the MAKEFILE_LIST
variable. From that variable, we construct a few set of derivative
variables:
pkgdir = $(dir $(lastword $(MAKEFILE_LIST)))
pkgname = $(lastword $(subst /, ,$(pkgdir)))
Essentially, pkgdir is the full directory where the package is located
(either relative to Buildroot's top directory for in-tree packages, or
absolute for packages in br2-external trees), while pkgname is the last
component of that directory.
pkgdir is in turn used to seed FOO_PKGDIR.
This all happens when we eventually call the package-generic infra,
later down in the file.
When they are parsed, the Makefiles for each linux-extensions are
appended to MAKEFILE_LIST, after the linux.mk one. But since they are
located in the same directory as the main linux.mk, the last component
of MAKEFILE_LIST, which is no longer the main linux.mk, will still yield
the correct values for the linux package.
This is a tough assumption we made there and then.
When we added the support for br2-external linux extensions, we where
very cautious to explicitly scan them from a directory named 'linux', so
that this would yield the correct package name.
And that worked well so far, until someone needed to build an older
kernel, for which our conditional patch is needed, and which just
failed:
/bin/bash: [...]/buildroot-external-linux-test/linux//0001-timeconst.pl-Eliminate-Perl-warning.patch.conditional: No such file or directory
When we scan linux extensions from a br2-external tree, the last
component of MAKEFILE_LIST is no longer in the same directory as the
main linux.mk, and thus the assumption above falls to pieces...
Again, when we added support for linux extensions from br2-external,
although we cared about the package name (pkgname), we completely missed
out on the package directory, and the LINUX_PKGDIR variable.
We do not have a very clean way out of this mess, but we have a nice
dirty trick: Scan the linux extensions from a br2-external tree before we
scan the in-tree ones. That way, the last component of MAKEFILE_LIST is
back to one that is in the same directory as the main linux.mk, and
we're back on tracks.
This is still very fragile, though, but short of a complete overhaul on
how packages are parsed and evaluated, this is the best we can come in
short order.
Reported-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Heiko Thiery <heiko.thiery@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps Linux CIP RT version to 4.19.90-cip16-rt6.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch bumps Linux CIP version to 4.19.94-cip18.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The 5.3.x series is now EOL so remove the option and add legacy
handling for it.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ARC processors have configurable size of MMU page. This configuration
happens during ASIC design and couldn't be changed in final silicone
not to mention runtime changes.
Given PAGE_SIZE macro is used a lot throughout the Linux kernel sources
we just hardcode a required value during the kernel configuration.
We used to support different MMU page sizes for ARC in Buildroot for
quite some time now but so far we only tweaked uClibc on the matter.
That left us with the kernel configured with whatever was in used defconfig.
In most of real cases that's OK because typically we're building firmware
for a particular ASIC which is supposed to have a unique kernel defconfig.
But if we're dealing with FPGA-based boards or even simlators like
Synopsys DesignWare nSIM or QEMU it's possible to have dfferent MMU page
size configured in that target mostly for the sake of testing.
And so we're trying to solve 2 problems here:
1. Make sure both user-space (via libc settings) and the Linux kernel
are "on the same page", i.e. expect to use the same MMU page size.
2. Simplify process of testing different page sizes.
As now we first need to set page size in Buildroot and then in the
kernel via "make linux-configure" or via Kconfig fragment.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
[yann.morin.1998@free.fr: simplify the conditions]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch bumps Linux CIP RT version to 4.19.82-cip14-rt5.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps Linux CIP version to 4.19.88-cip16.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that binutils 2.33.1 has been introduced, and we have moved to
2.32 as the default version, it is time to drop support for binutils
2.30.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds Linux CIP RT, the PREEMPT_RT real-time variant maintained
by the CIP team.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps Linux CIP version to 4.19.82-cip14.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Downloading from https a tarball is faster than cloning a git repo.
If needed, BR2_LINUX_KERNEL_CUSTOM_GIT can be used as a fallback
mechanism to downlad the CIP kernel with git.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The 5.2.x series is now EOL so remove the option and add legacy
handling for it.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bump CIP to version v4.19.75-cip11.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 5.1.x series is now EOL and 5.3.x has been added, so remove the option
and add legacy handling for it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: McCabe, Robert J <robert.mccabe@rockwellcollins.com>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add hash for LICENSE.
This version works with linux kernel 5.0 and newer. It requires
CONFIG_NF_NAT enabled in the kernel configuration, otherwise it fails
to build:
ERROR: "nf_nat_setup_info" [/home/thomas/projets/buildroot/output/build/xtables-addons-3.4/extensions/xt_DNETMAP.ko] undefined!
Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
[Thomas: enable CONFIG_NF_NAT in the kernel configuration.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps Linux CIP to version v4.19.65-cip8.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently the BR2_LINUX_KERNEL_DTB_IS_SELF_BUILT option is only
available to be selected by another config option. This option controls
if the Linux build system should build the DTB itself, or if buildroot
explicitly calls the Linux Makefile like "make something.dtb".
My use case: I want to build an OpenRISC image with a custom device tree
file. OpenRISC does not support appended DTBs, and I'm not using a
bootloader, but link everything into a single kernel (vmlinux) image.
The kernel option CONFIG_OPENRISC_BUILTIN_DTB allows me to specify a dtb
file, which is typically located in the kernel source tree in
arch/openrisc/boot/dts/NAME.dts.
Since my dts file is not part of the upstream kernel, I have two
options: either patch the kernel to include the DTS file, and then
specify it using the CONFIG_OPENRISC_BUILTIN_DTB option.
Or use buildroot's BR2_LINUX_KERNEL_CUSTOM_DTS_PATH config option to
copy any DTS file to the kernel source tree, and then specify this file
with CONFIG_OPENRISC_BUILTIN_DTB as before.
However, the second option also requries the buildroot option
BR2_LINUX_KERNEL_DTB_IS_SELF_BUILT to be set, otherwise I end up with a
"make -C kerneldir NAME.dts" call, which doesn't work (no such target
exists).
Currently the BR2_LINUX_KERNEL_DTB_IS_SELF_BUILT option exists, but it's
not visible/available. Simply making it available solves the problem for
me nicely.
Signed-off-by: Philipp Wagner <mail@philipp-wagner.com>
[Arnout: add help text]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since mdev was switched to the daemon mode introduced in Busybox 1.31.0,
it requires CONFIG_NET to be enabled in the kernel such that the mdev
daemon can listen to netlink events.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps Linux CIP to version v4.19.60-cip7.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Sometimes, it is required to call imagemagick from a post-build script
or the likes, so we have to allow the user to enable the host variant
for imagemagick.
Update the linux package to select the host variant now.
Signed-off-by: "Yann E. MORIN" <yann.morin@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
>From patch [1] included in kernel >= 5.0:
"The upcoming GCC 9 release extends the -Wmissing-attributes warnings
(enabled by -Wall) to C and aliases: it warns when particular function
attributes are missing in the aliases but not in their target.
In particular, it triggers for all the init/cleanup_module
aliases in the kernel (defined by the module_init/exit macros),
ending up being very noisy.
These aliases point to the __init/__exit functions of a module,
which are defined as __cold (among other attributes). However,
the aliases themselves do not have the __cold attribute.
Since the compiler behaves differently when compiling a __cold
function as well as when compiling paths leading to calls
to __cold functions, the warning is trying to point out
the possibly-forgotten attribute in the alias."
Werror is set by default while building ppc kernel [2], but
some warning can be introduced while building current kernel with
newer compiler (for example building kernel 4.19 with gcc 9.1).
For the same reason why we remove Werror in packages's compiler
flags. Building with Werror is not bulletproof when we start
using a newer compiler that introduce new warnings.
This is the case here.
Also this option is a bit strange since it's specific to ppc kernels:
"The intention is to make it harder for people to inadvertantly
introduce warnings in the arch/powerpc code."
Other kernel developers on other arch may be interested by a
similar/more generic option.
So, It's clearly intended for kernel developers.
Instead of backporting this patch [1] to kernel 4.19, select
unconditionally the Kconfig option CONFIG_PPC_DISABLE_WERROR
that allow to disable Werror.
Fixes:
https://gitlab.com/kubu93/toolchains-builder/-/jobs/205435741
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=a6e60d84989fa0e91db7f236eda40453b0e44afa
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=ba55bd74360ea4b8b95e73ed79474d37ff482b36
[3] https://gitlab.com/bootlin/toolchains-builder
Fix-suggested-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The 5.0.x series is now EOL and vulnerable to the "TCP SACK PANIC" issue.
Drop support for it in linux-headers.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To match the default kernel headers we use.
[Peter: drop 5.1.x bump, tweak commit message]
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To support building in (a subset of) the intel-microcode files into the
kernel using the CONFIG_EXTRA_FIRMWARE option, we need to ensure that the
microcode files are installed before the Linux kernel is built.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With an URL Buildroot will be able to download the patch
automatically.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
[Thomas: don't strip file:// in the non-download case]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps CIP to the latest SLTS version v4.19.13-cip1.
Kernel based on 4.4 is not deprecated, it will continue to be supported
as planned by the CIP foundation.
If the 4.4 version is needed, it should be selected manually.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the Linux CIP version to v4.4.176-cip31.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We currently do the Linux build as follows:
make <imagename>
if modules enabled; make modules; fi
However, Clement Léger recently reported that due to us not using the
"all" target, the GDB scripts that the kernel can build when
CONFIG_GDB_SCRIPTS is enabled are not built, since upstream kernel
commit 67274c083438340ad16c1437caebc84e1253b224 (merged in v5.1) moved
that logic to a separate scripts_gdb target, which is a dependency of
the "all" target.
While we could add some more logic to explicit generate the
"scripts_gdb" target, this logic would fail on Linux < 5.1 for which
this make target doesn't exist.
So instead, let's simplify the build logic, and use:
make all <imagename>
The "all" target automatically depends on "modules" if CONFIG_MODULES
is set, so we no longer need to explicit generate the "modules" target
separately.
As a result of this change, we may generate additional kernel images
compared to what was done previously, but such images would anyway not
be installed, and the additional build time is minimal.
We did some research as to why the kernel build was done like this in
Buildroot, and it's been like that since linux/linux.mk was added back
in 2010 by commit 487e21cff6 ("New,
simpler, infrastructure for building the Linux kernel").
Reported-by: Clément Leger <cleger@kalray.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
A patch was added to the Linux kernel in 5.1.0-rc3 which adds a
requirement that the host build environment include pkg-config. Add the
correct host-pkgconf dependency and environment variables to ensure
Linux picks up the correct libraries.
Move the existing LINUX_MAKE_ENV assignment earlier, to simplify the
append-assignment in the libelf conditional block.
Fixes: #11761
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: extend commit message as suggested by Yann]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This sets 5.0 to be the default, moving from 4.19 which was used instead
of 4.20 for the LTS branch.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This sets 5.0 to be the default, moving from 4.19 which was used instead
of 4.20 for the LTS branch.
We need to update linux/linux.hash as part of this commit, because
package/linux-headers/linux-headers.hash is a symlink to
linux/linux.hash.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We will need to build Image files for OpenSBI so allow that now.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We are back with 3 binutils version in Buildroot.
Now CFI support is always present for NIOSII.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the arrival of linux v5.0, we need yet another condition to set
_SITE correctly. Instead of continuing this madness, solve the problem
generically: use v2.6 for 2.6.*, and use the number before the first dot
in the other cases.
While we're at it, remove the comment which has been incorrect since
80d7b68167 (7 years ago).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Tested-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We have virtually no way to know the hashes for user-supplied patches,
so we should just ignore them.
Reported-by: Simon van der Veldt <simon.vanderveldt@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Tested-by: Simon van der Veldt <simon.vanderveldt@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Xenomai has two mutually exclusive cores:
- Cobalt: dual-kernel approach: patched kernel + userland
- Mercury: only userland
In the Cobalt core, not all architectures are supported. This is the source
of the existing ARCH_SUPPORTS variable.
In the Mercury core, there is no imposed architecture restriction.
Rename the XENOMAI_ARCH_SUPPORTS flag to XENOMAI_COBALT_ARCH_SUPPORTS and
move its check from the Xenomai package to the Cobalt core.
Nevertheless, even for Mercury, there are some restrictions:
- pthread_atfork is used, which requires an MMU
- sync functions like __sync_sub_and_fetch and __sync_add_and_fetch are
expected.
As the corresponding 'linux extension' selects Xenomai, we add the
MMU and sync dependencies there too. They may or may not already be covered
by XENOMAI_COBALT_ARCH_SUPPORTS flag.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps the Linux CIP version to v4.4.171-cip30 and updates the
download url to the new official one.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add an option to compile device trees in Linux with symbol generation
such that device tree overlays can be loaded on the target system
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
[Arnout: remove "default n" and move setting of LINUX_MAKE_ENV to the
place where the rest is set.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
linux is a bit different than other kconfig-package, because it has
"toolchain" in KCONFIG_DEPENDENCIES. Thanks to this, host-ccache *is*
ready by the time kconfig invocations are made, so we could use
$(HOSTCC) as the host compiler for kconfig related operations.
However, for consistency with other kconfig-package packages, we chose
to use $(HOSTCC_NOCCACHE) as well.
We cannot rely on the default value of HOSTCC passed by the
kconfig-package infrastructure, because $(LINUX_MAKE_FLAGS) also
contains a HOSTCC definition that would override the one passed by the
kconfig-package infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
4.20.x is not a long term support kernel, but 4.19.x is (supported until end
2020):
https://www.kernel.org/category/releases.html
With the upcoming Buildroot 2019.02 release being a LTS release, default to
4.19.x instead.
Notice: The userspace API breakage in net_stamp.h causing build failures has
now been fixed in 4.19.14 by commit e4a2ffe9029fd (net: Use
__kernel_clockid_t in uapi net_stamp.h)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: add comment in linux/Config.in and
package/linux-headers/Config.in.host so that we don't mistakenly bump
to 4.20+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
According to https://www.kernel.org/category/releases.html, these kernel
versions are no longer supported, so drop them now that we have added 4.20.x
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We need to update linux/linux.hash as part of this commit, because
package/linux-headers/linux-headers.hash is a symlink to
linux/linux.hash.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Processor Counter Monitor (PCM) is an application programming interface
(API) and a set of tools based on the API to monitor performance and
energy metrics of Intel(R) Core(TM), Xeon(R), Atom(TM) and Xeon Phi(TM)
processors.
This package contains a patch on the pmu-query.py script to look for the
pcm-core program at the default path. It's not nice to have a Buildroot
specific patch but let's use one while we look for a solution that is
acceptable upstream.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Peter: Needs C++, force X86_MSR on in linux]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using an initramfs, on the first-pass build, we create a dummy cpio
so that the build succeeeds. The real cpio will come later, and we'll do
a second-pass build to use the actual cpio.
However, when we touch that dummy cpio, the images/ directory may not
yet exist, since commit d0f4f95e39 (Makefile: rework main directory
creation logic) removed its creation at the begining of the build, to
only at the moment we need it, i.e. during the *_INSTALL_IMAGES_CMDS
steps.
However, the linux build is not a _INSTALL_IMAGES_CMDS step, so there is
no guarantee that images/ already exist at that time.
Fix that by explicitly creating images/ before touching the dummy cpio.
Reported-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps the Linux CIP kernel to version v4.4.154-cip28
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Checking for the existence of the dtc binary built by the
non-dependent dtc package may cause instable behaviour when giving more
freedom on the order of how the packages are built (parallelization).
In addidion, when moving to per-package host/target method, the check
would always trigger in the isolated host, leading to linux-dtc always
being installed as dtc.
This in turn may lead to undesired overwriting of the real host-dtc binary
when finally assembling the global host dir.
Thus rework the linux-dtc install condition to be defined by configuration
rather than compile time order.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We already turn on kernel features for several packages, so let's do it
for intel-microcode too, otherwise it's impossible to load the microcode
(by means of iucode-tools).
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We already turn on kernel features for several packages, so let's do it
for audit too, since the daemon is useless and fails to load otherwise.
Notice that we also turn NET on, since AUDIT depends on NET, like we do
for the wireguard package.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a simple way to change the linux bootup logo.
The patch was kept purposely simple to support only the use cause
where a user needs a color linux boot up logo.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Peter: clarify/reword option/help text, automatically enable framebuffer
support, fix convert path]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux tarball checksum was recently updated, including the one for
version 4.9.133. The checksum for this particular version of Linux
misses one character which lead to a build issue as the checksum does
not match:
ERROR: linux-4.9.133.tar.xz has wrong sha256 hash:
ERROR: expected: 3730fc025ba330a6f4908a6a1e4cb86d821000c84167721680ccf1b37b26563
ERROR: got : 53730fc025ba330a6f4908a6a1e4cb86d821000c84167721680ccf1b37b26563
ERROR: Incomplete download, or man-in-the-middle (MITM) attack
This patch fixes it.
Fixes: 0064c7b251 ("{linux, linux-headers}: bump 4.{4, 9, 14, 18}.x series")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added a hash file for the Linux kernel. Hashes have been copied
from the appropriate sha256sums.asc files on kernel.org.
The Linux hash file is also shared with the linux-headers package
via a symbolic link.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
[Thomas: update hashes with recent linux-headers changes.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Starting with linux-4.18, the kconfig from the kernel can call
to the compiler to test its capabilities; see:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/scripts/Kconfig.include
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
host-{flex,bison} are only needed to generate the dtc parser, so we
don't need them if the kernel does not have support for device tree.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rely on the system provided ones if avalable, and only resort to use our
owns if the sytem does not provide them.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The commit that added the dependency on host-{bison,flex} did
so because the pre-generated kconfig parser source files were
removed from the kernel tree, in linux-4.16.
But then, in linux-4.17, the pre-generated dtc parser source
files were in turn removed as well.
So, document the two reasons why they are needed, so we don't
accidentally remove them when we (soon) introduce the kconfig
dependencies.
(Also fix the first assignment to LINUX_DEPENDENCIES to be a
simple assignement, not an append-assignment.)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit replaces the loop copying out-of-tree DTS into the kernel
tree by a make foreach loop instead of a shell for loop. This allows
to error out if one of the DTS file cannot be copied (for example if
it doesn't exist).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the CIP Linux kernel to version v4.4.138-cip25
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc-8 started warning about function aliases that have a non-matching
prototype. This seems rather useful in general, but it causes tons of
warnings in the Linux kernel, where we rely on abusing those aliases
for system call entry points, in order to sanitze the arguments passed
from user space in registers.
See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82435
Disable the attribute-alias warning introduced by gcc-8 by adding
-Wno-attribute-alias to KCFLAGS.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
