The following defconfig:
BR2_x86_i686=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://toolchains.bootlin.com/downloads/releases/toolchains/x86-i686/tarballs/x86-i686--glibc--bleeding-edge-2018.11-1.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_8=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_14=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_INIT_NONE=y
BR2_TARGET_SYSLINUX=y
BR2_TARGET_SYSLINUX_EFI=y
fails to build due to missing setjmp/longjmp definitions, which is a
consequence of a change introduced between gnu-efi 3.0.9 and 3.0.10.
This build failure is fixed by adding another syslinux paytch, which
has been submitted upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some ATF configurations, require a pre-built bare metal toolchain to
build some platforms which host cortex-m series core, for instance
rockchip rk3399 has a cortex-m0 core. Without a pre-built bare metal
toolchain, the build fails:
make[3]: arm-none-eabi-gcc: Command not found
To solve this, this commit implements a
BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN
option. Platforms which have such requirement should enable this
config option.
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When barebox, and thus barebox-aux, are downloaded from a git tree, then
barebox-aux download fails because a hash check is attempted on the
downloaded archive:
Could not fetch special ref 'v2020.03.0'; assuming it is not special.
ERROR: No hash found for barebox-aux-v2020.03.0.tar.gz
This is because we only exclude from the check the archive of the bare
barebox:
BR_NO_CHECK_HASH_FOR += $(BAREBOX_SOURCE)
However, the default name of an archive is based on the package name,
which for barebox-aux is not 'barebox'.
Since barebox-aux really uses the exact same source as the bare barebox,
it should also share the archive name.
This has two direct consequences and advantages:
- the hash check is completely avoided for the barebox-aux archive;
- the barebox-aux archive is not downloaded as it is already
downloaded for barebox.
Reported-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
barebox and barebox-aux are really the same package, from the same URL
and the same version. They deserve being stored in the same directory.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some ATF configurations, such as the ones for the STM32MP1 processor
family, require DTC during the build as Device Tree files are
used. Without dtc, the build fails:
/bin/sh: 1: dtc: not found
dtc version too old (), you need at least version 1.4.4
plat/st/stm32mp1/platform.mk:239: recipe for target 'check_dtc_version' failed
make[1]: *** [check_dtc_version] Error 1
To solve this, this commit implements a
BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_DTC option, in a way that mimics
the BR2_TARGET_UBOOT_NEEDS_DTC option we already have for the U-Boot
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested with qemu_riscv32_virt_defconfig and
qemu_riscv64_virt_defconfig using Buildroot host-qemu 4.2.0.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add missing qstrip wrapping to the new
BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS option.
Signed-off-by: Francois Gervais <fgervais@distech-controls.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We can only know the details of the license files for known versions. For
custom, older or newer versions, the license files may change, or may be
moved around.
So, do for optee-os as was done for other packages in the recent past,
and only define the list of license files for the latest version.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We can only know the details of the license files for known versions. For
custom, older or newer versions, the license files may change, or may be
moved around.
So, do for at91bootstrap3 as was done for other packages in the recent
past, and only define the list of license files for the latest version.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We can only know the details of the license files for known versions. For
custom, older or newer versions, the license files may change, or may be
moved around.
So, do for Barebox as was done for ATF, linux, and linux-headers, and
only define the list of license files for the latest version.
Add the hash for that license file, and align hashes to the new spacing
convention.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We can only know the details of the license files for known versions. For
custom, older or newer versions, the license files may change, or may be
moved around.
So, do for U-Boot as was done for ATF, linux, and linux-headers, and only
define the list of license files for the latest version.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Starting with 2020.01, uboot started using the 'undefine' make
directive, which was only introduced with make 4.0.
In the general case, we do not have a way to know if the uboot
selected by the user is older or later than 2020.01, so we have
no way to know before hand if make >= 4.0 is needed or not. As
such, we have no other option than to always require it.
So, use the existing $(BR2_MAKE_HOST_DEPENDENCY) and $(BR2_MAKE),
both of each will ensure that we do use a make that is at least 4.0.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Allow specifying additional build targets for ATF.
This might be more useful when using a custom git repository.
For example, when using with the ATF repository from NXP QorIQ,
there is a new build target 'pbl' which is used to build the
pbl binary image. Note that in the specific case of the 'pbl'
target, additional build variables also need to be specified
through BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES.
Signed-off-by: Francois Gervais <fgervais@distech-controls.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The original UBOOT_FIXUP_LIBFDT_INCLUDE hook only works for u-boot versions
starting from v2017.11.
As older u-boot versions are still in common use today, e.g. in the
ci20_defconfig, extend the hook to cover a wider range of u-boot versions.
The main code change was proposed by Arnout Vandecappelle in [1].
Testing and comment changes were done by Thomas De Schampheleire.
Additional (build) testing done by Yann.
[1] http://lists.busybox.net/pipermail/buildroot/2019-May/251231.html
This was tested with the following defconfigs, that each excercise one
case:
----.-- No defconfig identified
2010.06 'lib/libfdt/', used to be simply 'libfdt' before upstream commit 0de71d507157...
2013.10 ci20_defconfig
2014.04 'srctree' used to be called 'SRCTREE' before upstream commit 01286329b27b27ea...
2017.05 olimex_a13_olinuxino_defconfig
2017.11 scripts/dtc/libfdt only exists since upstream commit c0e032e0090d6541549b19cc...
2018.01 mx6udoo_defconfig
2018.03 core change is equivalent to upstream commit e0d20dc1521e74b82dbd69be53a04884...
2019.10 nanopi_neo_defconfig
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[yann.morin.1998@free.fr: add the build-test results]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add an upstream URL to the help text in Config.in. This
addresses the issue where an incorrect URL is displayed
on the package stats web page.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When at91bootstrap3 was bumped to 3.9.0 in commit
513899e471, an incorrect hash was set:
it was the hash of the tarball generated by the Git download logic of
Buildroot, and not the hash of the tarball auto-generated by Github,
which is the one that we really download by default.
Fixes:
ERROR: at91bootstrap3-v3.9.0.tar.gz has wrong sha256 hash:
ERROR: expected: 9960b0d18fe42feee566d4c52efa0d7c8251685bf9acfdf343f30a27951ada1e
ERROR: got : e23e6df23b79ca81e412cb73a1f48bd95df8d46c7d52a1d073c2ed9d4f3a1a71
ERROR: Incomplete download, or man-in-the-middle (MITM) attack
Reported-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
[Thomas: improved commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Implement possibility to download AT91Bootstrap from a custom tarball
URL.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds support for GICv3 (such as GIC-500).
Signed-off-by: Jan Kotas <jank@cadence.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch improves the DTB handling, using a parameter
in more recent versions of the bootwrapper.
Signed-off-by: Jan Kotas <jank@cadence.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps the bootwrapper version to the latest.
Signed-off-by: Jan Kotas <jank@cadence.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It allows you to add the u-boot.itb to the list of U-Boot images that
can be created. Like the others, this one is also copied to the image
folder.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, when BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33 is
enabled, the arm-trusted-firmware package assumes that the BL33 image
provided by U-Boot is u-boot.bin. However for some platforms, the name
may be different (for example u-boot-dtb.bin). To support such use
cases, this commit adds a string option
BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_BL33_IMAGE to configure the
U-Boot image name, which defaults to u-boot.bin to preserve backward
compatibility.
Signed-off-by: Jerry Huang <jerry.huang@nxp.com>
Reviewed-by: Sergey Matyukevich <geomatsi@mail.com>
[Thomas: rewrite commit log and Config.in help text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds support for different platforms where the binaries have
different extensions.
Signed-off-by: Michael Schenk <michael.schenk@noser.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump OP-TEE OS package version to OP-TEE release 3.7.0.
This adds host-python-pyelftools to optee-os dependencies
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In commit 2c8ff251cb ("boot/uboot: add
option to generate env image from default env"), the possibility of
generating an environment image using the built-in U-Boot environment
as a source was added.
This is meant to happen when the string option
BR2_TARGET_UBOOT_ENVIMAGE_SOURCE is empty, but the original commit
added the Config.in help text to BR2_TARGET_UBOOT_ENVIMAGE, which is a
boolean option, and therefore cannot be empty.
Move the help text to BR2_TARGET_UBOOT_ENVIMAGE_SOURCE, where it
belongs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump OpenSBI to the latest version. We need a patch for RV32 to avoid
hard/soft float build failures.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The RISCV Proxy Kernel (AKA BBL) isn't being used by most distros so has
very limited testing. It has been replaced by OpenSBI and been
deprecated for awhile, so let's just remove it.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump version of Marvell DDR training software. This update accompanies
update of the ARM Trusted Firmware used on Marvell A8K platforms.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since release 18.12 binaries-marvell repository provides
common firmware supporting both A7K and A8K SoC families.
This commit bumps package version to 18.12 and removes
platform specific binary selections from Config.in.
Single firmware image suitable for both A7K and A8K
platforms is now specified in mk file explicitely.
Legacy handling is not needed, as configs which did have
the option set will continue to work without change.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Arnout:
- Remove BINARIES_MARVELL_IMAGE entirely;
- Add remark about legacy handling;
- Remove the deprecated option from the defconfigs and test that use
it.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since the ts4800_defconfig has been removed, the ts4800-mrboot package
is no longer useful, therefore we drop it.
Cc: Patrick Keroulas <patrick.keroulas@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
U-Boot supports a number of environment variables to pass specific
information. The following patches were submitted in the past to one
some specific Config.in option to pass some of these variables:
- http://patchwork.ozlabs.org/patch/881197/ proposed an option to
pass a custom EXT_DTB= variable
- http://patchwork.ozlabs.org/patch/1018245/ proposed an option to
pass a custom DEVICE_TREE= variable
Instead of adding one Config.in option for each of those variables,
let's provide a generic mechanism to pass arbitrary variables during
U-Boot build step.
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Clemens Gruber <clemens.gruber@pqgruber.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some platform may generate specific boot image files instead of
the generic files tee.bin and tee-*_v2.bin when building OP-TEE OS
package.
This change introduces optee-os configuration directive
BR2_TARGET_OPTEE_OS_CORE_IMAGES that allows board configuration
to specify its expected boot image file names.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas: use the current hardcoded values as the default for the new
config option, to avoid breaking existing setups, and therefore use
$(wildcard ...) to support wildcards]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
[Thomas:
- Config.in: move the BR2_TARGET_OPENSBI_PLAT dependency to a
"depends on", there's no need to have an if...endif block just for
that.
- Config.in: drop the BR2_TARGET_OPENSBI_LIBRARY_ONLY dependency,
since this option doesn't exist
- opensbi.mk: don't use qstrip on BR2_TARGET_OPENSBI_LINUX_PAYLOAD,
since it's a boolean option
- opensbi.mk: use += when adding linux to DEPENDENCIES
- opensbki.mk: refactor the firmware file installation with a loop]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds support to extract compiled in default env
via u-boot's get_default_envs script and generate env image from it.
Signed-off-by: Denis Osterland <Denis.Osterland@diehl.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
