Bump U-Boot to 2019.10 and kernel to version 5.3.4.
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump the kernel to version 5.3.1.
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OMAP kernels use 8250 driver by default. Hence the name of
the console device is not /dev/ttyO0 but /dev/ttyS0.
Use /dev/console in order to handle the console independently
of the selected driver.
Tested in BeagleBone Black board.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux to 5.2, U-Boot to 2019.07, and ATF to armada-18.12.2.
Updated ATF uses updated binaries-marvell package which now
provides common firmware supporting both A7K and A8K. So no
need to specify platform for binaries-marvell anymore.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump Linux to 5.2, U-Boot to 2019.07, and ATF to armada-18.12.2.
Updated ATF uses updated binaries-marvell package which now
provides common firmware supporting both A7K and A8K. So no
need to specify platform for binaries-marvell anymore.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since release 18.12 binaries-marvell repository provides
common firmware supporting both A7K and A8K SoC families.
This commit bumps package version to 18.12 and removes
platform specific binary selections from Config.in.
Single firmware image suitable for both A7K and A8K
platforms is now specified in mk file explicitely.
Legacy handling is not needed, as configs which did have
the option set will continue to work without change.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Arnout:
- Remove BINARIES_MARVELL_IMAGE entirely;
- Add remark about legacy handling;
- Remove the deprecated option from the defconfigs and test that use
it.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add basic support for the Libre Computer "La Frite" SBC.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to the 20190819 snapshot there is now a dedicated dts file
for the rpi0, so use that rather than the rpi-b-plus one:
bd1336d8b6
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes#12816
Commit 42d22f3bdb ({configs/raspberrypi,package/rpi-firmware}: bump
kernel/firmware to 20190819 version) updated the kernel version but failed
to take into consideration that the rpi0w dts file has been renamed:
6f91b5dbfd
Fix it by renaming the dts/dtb file referenced from the kernel build and
genimage.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It's the latest original version. The defconfig and
package/rpi-firmware changes are done in a single patch, as they are
going together.
Signed-off-by: Gergely Imreh <imrehg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There is no option BR2_TARGET_GRUB2_AARCH64_EFI but
BR2_TARGET_GRUB2_ARM64_EFI in grub2 package.
BR2_TARGET_GRUB2_ARM64_EFI was introduced by the commit [1].
[1] 273a27804a
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig tries to build an ARM Trusted Firmware version that
needs an ARM32 toolchain, which is not available as the platform is an
ARM64 one. The correct solution for this is to have a package in
Buildroot for an ARM32 bare-metal toolchain, but this wasn't done in
time for the 2019.08 release.
In order to not release 2019.08 with a broken defconfig, let's remove
it. It can be re-added later once the ARM32 bare-metal toolchain
problem has been resolved.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/278489410
Cc: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig tries to build an ARM Trusted Firmware version that
needs an ARM32 toolchain, which is not available as the platform is an
ARM64 one. The correct solution for this is to have a package in
Buildroot for an ARM32 bare-metal toolchain, but this wasn't done in
time for the 2019.08 release.
In order to not release 2019.08 with a broken defconfig, let's remove
it. It can be re-added later once the ARM32 bare-metal toolchain
problem has been resolved.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/278489367
Cc: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig tries to build an ARM Trusted Firmware version that
needs an ARM32 toolchain, which is not available as the platform is an
ARM64 one. The correct solution for this is to have a package in
Buildroot for an ARM32 bare-metal toolchain, but this wasn't done in
time for the 2019.08 release.
In order to not release 2019.08 with a broken defconfig, let's remove
it. It can be re-added later once the ARM32 bare-metal toolchain
problem has been resolved.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/278489328
Cc: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig tries to build an ARM Trusted Firmware version that
needs an ARM32 toolchain, which is not available as the platform is an
ARM64 one. The correct solution for this is to have a package in
Buildroot for an ARM32 bare-metal toolchain, but this wasn't done in
time for the 2019.08 release.
In order to not release 2019.08 with a broken defconfig, let's remove
it. It can be re-added later once the ARM32 bare-metal toolchain
problem has been resolved.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/278489329
Cc: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig tries to build an ARM Trusted Firmware version that
needs an ARM32 toolchain, which is not available as the platform is an
ARM64 one. The correct solution for this is to have a package in
Buildroot for an ARM32 bare-metal toolchain, but this wasn't done in
time for the 2019.08 release.
In order to not release 2019.08 with a broken defconfig, let's remove
it. It can be re-added later once the ARM32 bare-metal toolchain
problem has been resolved.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/278489325
Cc: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig has been failing to build since we switched the default
gcc version to gcc 8.x, as the Linux kernel version is too old and
doesn't contain the necessary fixes to build with gcc >= 8.x.
Despite several pings to the original submitter of the defconfig
(which is not listed in MAINTAINERS), no fix has been sent, so it is
time to drop this defconfig before the 2019.08 release.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/278489442
Cc: Patrick Keroulas <patrick.keroulas@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The old 3.10.x based vendor kernel does not build correctly with gcc 8.x.
While there is basic s500 support in the mainline kernel, there is not yet a
mmc driver so it isn't quite a replacement yet.
Stick to the vender kernel for now and revert back to gcc 7.x, hopefully
mainline support will be more complete once gcc 7.x gets dropped.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The TS-7680 defconfig does not build with gcc 8.x and 9.x because it
uses an old 3.14 kernel. Technologic Systems, the board manufacturer
recently released an updated 4.9 based kernel on a separate repository
on github.
Bump the kernel release from 3.14.28 to 4.19.186 and update the linux
defconfig name as requested in the TS-7680 documentation [1].
[1] https://wiki.embeddedarm.com/wiki/TS-7680#Linux_4.9.y
Signed-off-by: Julien Grossholtz <julien.grossholtz@openest.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds a minimal defconfig to build a Buildroot system for
the STM32MP157 Discovery Kit, which is the low-cost evaluation
platform for the new STM32MP157 system-on-chip from ST. This
system-on-chip features a single or dual Cortex-A7, a single
Cortex-M4, and a wide variety of peripherals.
This commit includes a custom linux configuration file, because there
is no specific defconfig for this platform in the kernel, only
multi_v7_defconfig supports it, which is really a massive
defconfig. That's why a custom linux configuration file is added.
A small U-Boot config fragment allows to disable the watchdog, so that
userspace by default doesn't need to have a watchdog daemon running.
The vendor U-Boot and Linux trees are used for the moment, but the
platform support is being upstreamed, so switching to upstream
versions will be possible in the relatively near future.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It is not used by any other application selected by those defconfigs.
Tested building all boards and searching recursively for devmem2 in the
target directory.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The kernel configuration used by the bananapi_m64_defconfig needs
host-openssl, otherwise it fails to build with:
scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/269139123
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The kernel configuration used by the bananapro_defconfig needs
host-openssl, otherwise it fails to build with:
scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/269139124
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The U-Boot configuration for the olimex_a33_olinuxino needs pylibfdt,
and therefore needs host-swig. Without this, the build fails with:
unable to execute 'swig': No such file or directory
error: command 'swig' failed with exit status 1
scripts/dtc/pylibfdt/Makefile:27: recipe for target 'scripts/dtc/pylibfdt/_libfdt.so' failed
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/269139202
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The kernel configuration used by the pandaboard_defconfig needs
host-openssl, otherwise it fails to build with:
scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/269139222
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The kernel configuration used by the qemu_ppc_mac99_defconfig needs
host-openssl, otherwise it fails to build with:
scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/269139257
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The odroidc2 defconfig is using gcc 4.9 version in order to build
uboot (2015.01) and kernel (3.14.79) for the board.
We are going to remove gcc 4.9 version in Buildroot and this
defconfig is the only remaining one using this version.
Since we don't have the board, we can't update the defconfig with
newer bootloader and kernel version.
A new defconfig for the odroidc2 board are welcome as soon as
it use a newer uboot and kernel version.
Remove the defconfig from the gitlab yaml.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is based on the pi3 defconfig. There is currently no 64-bit support
since the upstream kernel does not build in this configuration.
Signed-off-by: Michael Cullen <michael@michaelcullen.name>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for the HiFive Unleashed board. This includes
building the firmware, kernel and rootFS for the HiFive Unleashed.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
[Thomas:
- fix the directory name hifive_unleased -> hifive-unleashed
- drop from readme.txt the instructions about manually flashing each
partition, since we have a full SD card image
- drop the custom post-image.sh script]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
Custom u-boot
Linux v5.1
ATF v2.0
Buildroot default packages
Tested-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
[Thomas:
- Use BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_1
- Use final 5.1 kernel
- Use default ext2 filesystem]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
u-boot v2019.04
Linux v5.0
Buildroot default packages
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
[Thomas: use BR2_TARGET_UBOOT_BOOT_SCRIPT to generate the U-Boot
script, instead of doing it in the post-build]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
Linux 5.1
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packages
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
[Thomas:
- Use the headers from the kernel, by using
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_1=y
- Use the default ext2 rootfs size]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
Linux 5.1
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packages
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
[Thomas:
- Use the headers from the kernel, by using
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_1=y
- Use the default ext2 rootfs size]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
Linux 5.1
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packages
Tested-by: Akash Gajjar <akash@openedev.com>
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
[Thomas:
- Use the headers from the kernel, by using
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_1=y
- Use the default ext2 rootfs size]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
Linux v5.2
Custom U-Boot
Arm Trusted Firmware v2.0
Buildroot default packages
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
[Thomas:
- Use the kernel headers from the kernel, by using
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_2=y
- Use the final 5.2 kernel instead of rc1.
- Use the default ext2 rootfs size]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Such config allows to setup gitlab tests for various
qemu architectures (x86, mips, nios2, microblaze, ..., etc)
using the same Qemu version.
Signed-off-by: Jugurtha BELKALEM <jugurtha.belkalem@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The most important change is to use the toolchain compiled by
buildroot itself. We also bump kernel to 5.0 with kernel.org.
Gx6605s' PHYS_OFFSET if 0x10000000 and we make qemu and gx6605s the
same to ease maintaince. This PHYS_OFFSET is also OK for 610 qemu.
In this patch we add gx6605s.dts in board/csky, because linux-5.0
doesn't contain gx6605s.dts in its tree.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Theses defconfig was added at the when gcc 6 was not the default version
used by Buildroot, so the gcc version was explicitely set.
Since then, gcc 8.x is used as the default. So drop BR2_GCC_VERSION_6_X.
Tested with Qemu 2.8.1 (Debian 1:2.8+dfsg-6+deb9u7)
qemu_mips32r6_malta_defconfig
qemu_mips32r6el_malta_defconfig
qemu_mips64r6_malta_defconfig
qemu_mips64r6el_malta_defconfig
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit df7005975e, the linux
configuration requires host-openssl to be built.
Reported-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Only the atmel_sama5d27_som1 board was bumped to linux4sam_6.1 so update
the other boards.
Moreover, display variant device trees are no longer in the linux4sam
kernel tree as we have adopted the DT overlays. In case of interest for those
DTs, please use the Microchip external available here:
https://github.com/linux4sam/buildroot-external-microchip
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
PowerPC kernel developers were after a userspace for testing 32-bit
powerpc kernels. This machine both suits that requirement and has
support in qemu. It's also a fairly common piece of 32-bit ppc hardware.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Tested-by: Daniel Axtens <dja@axtens.net>
[Peter: lock kernel/headers to 5.2.4]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update the i.MX8MM-EVK BSP to match the latest version
referenced on the NXP website.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump the kernel to version 5.2.4.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to version 2019.07 and kernel to version 5.2.4.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The recent change to default to gcc 8 for the internal toolchain broke this
defconfig. Fix it by bumping to the latest 4.19 kernel.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/259853955
The kernel now uses ttySx for the omap serial ports, so adjust the getty
port to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
More entropy is required at boot time for the ssh
daemon to start.
So, enable rngd which feeds the entropy to the kernel
entropy tool.
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2019.07 and kernel to version 5.1.16.
Also
- adjust the U-Boot binary name after DM conversion.
- add missing notes about DFU
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Tested-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also
- adjust the U-Boot binary name after DM conversion.
- add missing notes about flashing U-Boot and SPL
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump Linux and U-Boot versions.
The Linux configuration file and patches are no longer needed.
Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
[Thomas: also use a tarball for U-Boot.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the 32-bit defconfig to use the latest kernel. This requires a
patch to revert a ABI to ensure that the glibc port continues to work.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the 64-bit defconfig to use the latest kernel.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for the SolidRun Armada 8040 based Clearfog GT-8K. This
board has the same processor as the Macchiatobin, so we can reuse the
Macchiatobin U-Boot and image definitions.
The kernel fragment enables drivers that are necessary to make
networking ports work (SFP, Ethernet port, and Ethernet switch).
Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux to 5.1 and U-Boot to version 2019.01.
U-Boot patch is no longer needed, applied upstream.
U-Boot defconfig name for this board has changed to pico-pi-imx7d.
U-Boot now supports distrobootcmd for this board, so add the appropriate
extlinux.conf and use SPL+u-boot.img instead of u-boot.imx. Note that
the common freescale post-image script handles things appropriately
based on the selected options in .config.
dosfstools and mtools are no longer needed to build the image.
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io>
[Arnout: remove BR2_PACKAGE_HOST_DOSFSTOOLS and BR2_PACKAGE_HOST_MTOOLS]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Very similar to orangepi-zero, except that the board has a 16MB SPI flash, a
2nd ethernet port is provided through a Realtek RTL8152 and wifi is provided
through a Realtek RTL8189FTV (no mainline driver, not supported).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following ffbe46a529 ("linux: simplify LINUX_BUILD_CMDS"), the Linux
kernel build for these xtensa qemu builds an image format that needs
mkimage.
Reported-by: Jugurtha BELKALEM <jugurtha.belkalem@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Jugurtha BELKALEM <jugurtha.belkalem@smile.fr>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit bumps Linux & Linux-headers to 5.0 and U-Boot to version 2019.01
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Pierre-Jean Texier <a class="moz-txt-link-rfc2396E" href="mailto:pjtexier@koncepto.io"><pjtexier@koncepto.io></a>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Following ffbe46a529 ("linux: simplify
LINUX_BUILD_CMDS"), the Linux kernel build for
qemu_ppc_virtex_ml507_defconfig builds an image format that needs
mkimage.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/199339544
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Following ffbe46a529 ("linux: simplify
LINUX_BUILD_CMDS"), the Linux kernel build for
qemu_ppc_mpc8544ds_defconfig builds an image format that needs
mkimage.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/199339543
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Following ffbe46a529 ("linux: simplify
LINUX_BUILD_CMDS"), the Linux kernel build for
qemu_nios2_10m50_defconfig builds an image format that needs mkimage.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/199339537
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Following ffbe46a529 ("linux: simplify
LINUX_BUILD_CMDS"), the Linux kernel build for beaglebone_defconfig
builds more things, including some .itb files, which require mkimage
with FIT support.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/199339433
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump of U-Boot to 2019.01, pylibfdt is needed to be able to
build the U-Boot image, so we need to enable
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/199339519
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump of U-Boot to 2019.01, pylibfdt is needed to be able to
build the U-Boot image, so we need to enable
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/199339518
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump of U-Boot to 2019.01, pylibfdt is needed to be able to
build the U-Boot image, so we need to enable
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/199339510
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump of U-Boot to 2019.01, pylibfdt is needed to be able to
build the U-Boot image, so we need to enable
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/199339509
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump of U-Boot to 2019.01, pylibfdt is needed to be able to
build the U-Boot image, so we need to enable
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/199339505
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump of U-Boot to 2019.01, pylibfdt is needed to be able to
build the U-Boot image, so we need to enable
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/199339498
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump of U-Boot to 2019.01, pylibfdt is needed to be able to
build the U-Boot image, so we need to enable
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/199339457
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump of U-Boot to 2019.01, pylibfdt is needed to be able to
build the U-Boot image, so we need to enable
BR2_TARGET_UBOOT_NEEDS_PYLIBFDT.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/199339456
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit ed02414e9c
("configs/raspberrypi*: bump kernel version to 5eeff139ea"), which
updated all RaspberryPi defconfigs to use Linux 4.19,
raspberrypi3_defconfig had its
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19 option updated, but not the
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION, which still pointed to an
older Linux 4.14-based RPi kernel. This caused a build failure due to
the headers being more recent than the actual kernel being built.
This commit fixes that by using the same kernel version as all other
RPi defconfigs.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/199339559
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The default of 60 MB is no longer sufficient to contain all the tools
enabled in this "development" defconfig, so let's increase the ext4
image size to 120 MB.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/199339421
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The default of 60 MB is no longer sufficient to contain all the tools
enabled in this "development" defconfig, so let's increase the ext4
image size to 120 MB.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/199339417
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The default of 60 MB is no longer sufficient to contain all the tools
enabled in this "development" defconfig, so let's increase the ext4
image size to 120 MB.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/199339426
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to Linux 4.19 in commit
ed02414e9c, the number of kernel modules
built has increased significantly, to the point where the default of
60 MB for the ext4 image is no longer sufficient, so let's increase to
120 MB.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/199339561
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to Linux 4.19 in commit
ed02414e9c, the number of kernel modules
built has increased significantly, to the point where the default of
60 MB for the ext4 image is no longer sufficient, so let's increase to
120 MB.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/199339556
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump to Linux 4.19 in commit
ed02414e9c, the number of kernel modules
built has increased significantly, to the point where the default of
60 MB for the ext4 image is no longer sufficient, so let's increase to
120 MB.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/199339555
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The default rootfs image size is too small, causing the following
build failure:
Copying files into the device: __populate_fs: Could not allocate block in ext2 filesystem while writing file "udevd"
mkfs.ext4: Could not allocate block in ext2 filesystem while populating file system
*** Maybe you need to increase the filesystem size (BR2_TARGET_ROOTFS_EXT2_SIZE)
So we increase it to 120 MB.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/199339415
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bumps to linux/linux-headers 5.0 and u-boot version 2019.01
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bumps to linux/linux-headers 5.0 and u-boot version 2019.01
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump to linux/linux-headers 5.0 and u-boot version 2019.01
and use mainline linux.
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Default value of CONFIG_SYS_BOOTM_LEN in u-boot causes board reset for
large uImage files, so add u-boot patch to increase the maximum kernel
image size.
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The board is setup to track upstream Linux as the official
vendor support was complete(depricated) at 4.1 via NXP SDKs.
The target does not build uboot and assumes the user still uses the NXP
suggested prebuilts in the SDK2.0 (last release for PowerPC). If a
uboot is required, the source for SDK2.0 can be found in the following
repo.
http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/tag/?id=fsl-sdk-v2.0-1703
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Arnout: update .gitlab-ci.yml]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add Andes 32-bit defconfig for AE3XX platform.
Signed-off-by: Che-Wei Chuang <cnoize@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Nylon Chen <nylon7@andestech.com>
[Thomas:
- fix commit title to match the defconfig name
- use the external toolchain package]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now based on 4.19.23 (from 4.14.98) and bump linux header
version accordingly and needs host openssl.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bumps to linux/linux-headers 5.0 and u-boot version 2019.01.
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Default value of CONFIG_SYS_BOOTM_LEN in u-boot causes board reset for
large uImage files, so add u-boot patch to increase the maximum kernel
image size.
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bumps to linux/linux-headers 5.0 and u-boot version 2019.01. The
kernel patch is no longer needed, as the Device Tree for the platform
is now upstream.
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bumps to linux/linux-headers 5.0 and u-boot version 2019.01
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bumps to linux/linux-headers 5.0 and u-boot version 2019.01
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bumps to linux/linux-headers 5.0 and u-boot version 2019.01
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bumps to linux/linux-headers 5.0 and u-boot version 2019.01
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bumps to linux/linux-headers 5.0 and u-boot version 2019.01
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bumps to linux/linux-headers 5.0
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This bumps to linux/linux-headers 5.0
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This bumps to linux/linux-headers 5.0
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This bumps to linux/linux-headers 5.0
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This bumps to linux/linux-headers 5.0
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This bumps to linux/linux-headers 5.0.
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In u-boot v2017.09 release, configs/imx6qdl_icore_rqs_mmc_defconfig
was renamed to configs/imx6qdl_icore_rqs_defconfig. So use correct
defconfig file name.
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bumps to linux/linux-headers 5.0.
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In u-boot v2018.03 release, configs/imx6ul_isiot_mmc_defconfig was
removed and afterwards both emmc and mmc use the same
imx6ul_isiot_emmc_defconfig file so fix the same.
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
