Also makes the installation of the init script unconditional.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
AVR32 is using uClibc 0.9.31, which lacks some CAN related definitions
that prevent the gpsd nmea2000 driver from building.
The rest of gpsd, with all options and drivers enabled, builds fine on
AVR32.
Fixes:
http://autobuild.buildroot.org/results/ee2/ee2ec848e893f08fa80caf99a67e68b73b6400e8/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch converts udev to a virtual package. For the moment, there is only
one provider for the udev features: eudev.
Packages meant to provide udev-like features must select the symbol
BR2_PACKAGE_HAS_UDEV.
Packages depending on BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV or
BR2_PACKAGE_UDEV have been converted to use the new symbol.
[Peter: move legacy symbols under 2014.05]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gpsd will fail on an internal compiler error for the microblaze
architecture so disabling it on that architecture.
Fixes:
http://autobuild.buildroot.org/results/42d/42da870722f24e4202d8265597771a0449e74cfd
[Peter: add comment explaining why]
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 3.11 release of gpsd still hasn't materialised. For now, bump the Git
snapshot again, removing local patches that have now been merged upstream.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In the Config.in file of package foo, it often happens that there are other
symbols besides BR2_PACKAGE_FOO. Typically, these symbols only make sense
when foo itself is enabled. There are two ways to express this: with
depends on BR2_PACKAGE_FOO
in each extra symbol, or with
if BR2_PACKAGE_FOO
...
endif
around the entire set of extra symbols.
The if/endif approach avoids the repetition of 'depends on' statements on
multiple symbols, so this is clearly preferred. But even when there is only
one extra symbol, if/endif is a more logical choice:
- it is future-proof for when extra symbols are added
- it allows to have just one strategy instead of two (less confusion)
This patch modifies the Config.in files accordingly.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 3.11 release of gpsd is imminent; in the meantime, backport some patches
from upstream to fix some of the autobuild failures.
Also bump to the most recent Git snapshot.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For gpsd 3.10, the ubx scons option has been renamed to ublox. Update our
makefile accordingly.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the gpsd version bump from 3.9 to 3.10, gpsd has been generating a lot
of autobuild failures. See, for example, the following.
http://autobuild.buildroot.net/results/c8f/c8f2eed70cfbdcb7e7af820977aa531b59f0575a/
A 3.11 release is expected shortly; in the interim, switch to a recent Git
snapshot in which the most serious build problems appear to have been fixed.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The profiling support is not available on AArch64, causing build
failures such as:
http://autobuild.buildroot.net/results/724f8646e1c2c28cf187f2313244d1e3e61b4c25/
According to Will Newton, function profiling will only be added in the
next version of the AArch64 Linaro toolchain. This indicates it is a
rather new feature in AArch64, so for the moment, just disallow
profiling on AArch64. We can revise this later, when this feature has
been made available in Linaro toolchains, and official gcc releases
(for internal toolchain support).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When a package A depends on config option B and toolchain option C, then
the comment that is given when C is not fulfilled should also depend on B.
For example:
config BR2_PACKAGE_A
depends on BR2_B
depends on BR2_LARGEFILE
depends on BR2_WCHAR
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
This comment should actually be:
comment "A needs a toolchain w/ largefile, wchar"
depends on BR2_B
depends on !BR2_LARGEFILE || !BR2_WCHAR
or if possible (typically when B is a package config option declared in that
same Config.in file):
if BR2_B
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
[other config options depending on B]
endif
Otherwise, the comment would be visible even though the other dependencies
are not met.
This patch adds such missing dependencies, and changes existing such
dependencies from
depends on BR2_BASE_DEP && !BR2_TOOLCHAIN_USES_GLIBC
to
depends on BR2_BASE_DEP
depends on !BR2_TOOLCHAIN_USES_GLIBC
so that (positive) base dependencies are separate from the (negative)
toolchain dependencies. This strategy makes it easier to write such comments
(because one can simply copy the base dependency from the actual package
config option), but also avoids complex and long boolean expressions.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(untested)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch lines up the comments in Config.in files that clarify which
toolchain options the package depends on.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, when we need to do a conditional on the type of C library
used, we need to take into account the three toolchain backends. As we
are going to add eglibc support to the Buildroot toolchain backend, it
would become even uglier, so this patch introduces two new hidden
options: BR2_TOOLCHAIN_USES_UCLIBC and BR2_TOOLCHAIN_USES_GLIBC, that
exist regardless of the toolchain backend. The entire Buildroot code
base is converted to use those options.
Note that we have intentionally created only one option
(BR2_TOOLCHAIN_USES_GLIBC) for both glibc and eglibc, since they are
essentially the same, as far as Buildroot is concerned.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a couple of patches submitted by Mike Frysinger to gpsd upstream. One of
these patches (that for the gpsd/dbus interface) fixes autobuild failures
such as the following.
http://autobuild.buildroot.net/results/41ccc838c5d44ab237a7195767940585bbb8b1f6
Note that neither of these patches has yet been accepted upstream.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Version 3.8 of gpsd has been released, which includes some patches sent
upstream by Thomas Petazzoni. This patch bumps the gpsd package version,
and removes the upstreamed patches.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The PPS feature of gpsd depends on the NTP shared memory time hinting feature.
This patch caused the NTPSHM feature to be enabled whenever the PPS feature
is enabled. This should fix build failures such as the following.
http://autobuild.buildroot.net/results/e58a9a9f884acb6834a8afe4a8a3d056dc509359/build-end.log
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The platform.linux_distribution method was introduced in Python 2.6. Some
of the Buildroot autobuilders still use Python 2.5, which is causing build
failures such as the following.
http://autobuild.buildroot.net/results/045f1f69bac170d8e75cb4952a2e5b4e85a677b8/build-end.log
This patch removes the linux distribution check from the gpsd SConstruct file.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that ncurses has been bumped to 5.9, it installs .pc files for
pkg-config, which allows gpsd to find it properly without the need to
specify a custom location for ncurses5-config.
Since gpsd now uses pkg-config to find the ncurses library, we also
add host-pkg-config in the dependencies.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Python support is not cross-compile friendly (uses host compiler,
installs in wrong location, etc.) and nobody needs it at the moment,
so leave that to the first person who will need Python support for
gpsd.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
prefix should always be /usr, and destdir must be passed as DESTDIR,
and in the environment, not as a scons argument. Finally, we pass the
sysroot= argument to scons so that it doesn't add -L/usr/lib
parameters when compiling.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It currently fails to build with:
libgpsd_core.c: In function 'gpsd_poll':
libgpsd_core.c:881: error: 'const struct gps_type_t' has no member named 'min_cycle'
libgpsd_core.c:884: error: 'const struct gps_type_t' has no member named 'min_cycle'
and is probably not a very important feature for normal users of gpsd.
The build problem has been reported to the gpsd-users mailing list.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If the buildroot infrastructure finds a patch file that contains the
$PKG-$VERSION tuple in the filename, it will only apply this kind of
patches, ignoring the rest of the patches in the package directory.
As a result of which, the gpsd-fix-libgpsmm.patch did not apply
because the gpsd-2.95-navcom.patch satisfies the $PKG-$VERSION convention.
The buildroot policy (as discussed during the Buildroot Developer meeting)
is to remove the package version from the patch filename.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
gpsd uses dbus-glib as the dbus interface, so it should only be built if
libglib2 has been selected. To simplify things, build dbus support only
if dbus-glib is selected.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thanks to the pkgparentdir and pkgname functions, we can rewrite the
AUTOTARGETS macro in a way that avoids the need for each package to
repeat its name and the directory in which it is present.
[Peter: pkgdir->pkgparentdir]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that those values are passed at the autotools infrastructure
level, there's no need for every package to pass inconsistent values.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that we have libtool-2.2.x patch support, we can get rid of a bunch
of _LIBTOOL_PATH = NO, fixing (potential) cross link issues.
Notice: php not changed, as it uses a very old 1.5 version for the
embedded sqlite, where our buildroot-libtool-v1.5.patch doesn't apply.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
fix wrong configure symbol name for MTK.
remove default values from most of options and leave only
default y for NMEA protocol (90% of users will need this one)
and features for gpsd to reconfigure device.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
