The option --enable-video-directfb=no was being assigned to
SDL_CONF_OPTS instead of being appended to it when
BR2_PACKAGE_SDL_DIRECTFB was disabled. That would clobber any options
previously added to SDL_CONF_OPTS (namely --enable-video-fbcon=yes|no).
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Autogenerated from rename-patch.py (http://patchwork.ozlabs.org/patch/403345)
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We do not need an X11-capable host SDL, so just disable X11 support.
This currently works if the build machine has the X11 development
packages installed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thanks to the 2 previous patches of the series, BR_PATH contains
all locations in which host-packages may install programs.
This patch replaces the occurrences TARGET_PATH and HOST_PATH with
BR_PATH, everywhere these variables are used in the *.mk files.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The host variant of sdl inherited the dependencies and conf opt from
sdl which could lead to some trouble.
For example:
If you were to build host-sdl and had alsa-lib enabled in your
packages list, it would try to build host-alsa-lib which does not
exists.
This patch define basic dependencies and conf opt for the host variant.
Reported-by: Eric Limpens <limpens@gmail.com>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be sure that host-autoconf dependency is already built move the
call to autogen.sh from SDL_POST_PATCH_HOOKS to SDL_PRE_CONFIGURE_HOOKS.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Host version is needed to build xbmc
[Peter: use _PRE_CONFIGURE_HOOKS like target version]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be sure that host-autoconf dependency is already built move the
call to autogen.sh from SDL_POST_PATCH_HOOKS to SDL_PRE_CONFIGURE_HOOKS.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Context:
The autobuilders were failing on the symbol _XData32 being in conflicts.
A patch had been added to SDL to add a check to the configure.in
Problem:
Sometimes, the build would fail, because of an _XData32 symbol being in
conflicts eventhrough the patch was here.
What was happening:
Following the classic buildroot workflow:
- Extract
- [...]
- Apply 001 patch, which touches configure.in AND configure
- Apply 002 patch, which touches configure.in
- Invoke autogen.sh
- [...]
Right before running autogen.sh, we have configure.in which is more
recent than configure, which is fine.
We then, execute autogen.sh which, basically, runs autoconf.
If your machine was lighty loaded, the time difference between
configure.in and configure was really tiny (ms order), which seems to be
neglected by autoconf.
The results was that the configure was *NOT* generated. And our second
patch was not taken into account.
If your machine was under heavy load, the time difference between the
two files would have been greater and then *maybe* picked up by
autoconf. And then the configure file was re-generated.
When the 0001 patch was introduced, SDL package did *NOT* run it's
autogen.sh, which is why it touches also the configure.
This came later, causing this behavior.
Fixes:
http://autobuild.buildroot.net/results/d1c/d1c36f634dbf6b6e5d18444c2a23dfd129202b80/
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Applying an upstream patch to fix a compilation error with versions of
libX11 since 1.5.99.902. This patch modifies configure.in so we need to
run autogen.sh to make it working correctly. Running autoreconf will
fail because SDL uses bit tricky automake/autoconf configuration.
Upstream patch URL:
http://hg.libsdl.org/SDL/rev/91ad7b43317a
Fixes:
http://autobuild.buildroot.net/results/bf8/bf83466a7bbb0635d97fe279a18778d92f20bea2/
[Peter: add comment why we're doing this, add needed dependencies]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The configure script nicely supports a preconfigured directfb-config
(using ac_cv_path_DIRECTFBCONFIG), except for when it checks the directfb
version where it simply uses whatever directfb-config is in the path,
breaking the build when this isn't available / recent enough.
Fix is to use the correct one instead. As SDL doesn't autoreconf cleanly,
also patch the generated configure script.
Finally move the ac_cv_path_DIRECTFBCONFIG setting under the directfb
conditional as it is only needed there.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Use the <pkg>_CONFIG_SCRIPTS mechanism to handle the sdl-config
script, so that it properly gets removed from the target. However, we
can't completely remove the manual fixup, because it also takes care
of removing the -Wl,-rpath option, which the general
<pkg>_CONFIG_SCRIPTS doesn't do.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thanks to the pkgparentdir and pkgname functions, we can rewrite the
AUTOTARGETS macro in a way that avoids the need for each package to
repeat its name and the directory in which it is present.
[Peter: pkgdir->pkgparentdir]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Ensure alsa-lib gets built before SDL if enabled, so the SDL configure
script correctly detects alsa support.
Noticed by Ayla on IRC.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that we have libtool-2.2.x patch support, we can get rid of a bunch
of _LIBTOOL_PATH = NO, fixing (potential) cross link issues.
Notice: php not changed, as it uses a very old 1.5 version for the
embedded sqlite, where our buildroot-libtool-v1.5.patch doesn't apply.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The ps3 driver is enabled by default on ps3, but depends on spu support,
which most ppc toolchains don't have, so disable it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The post installation hook of SDL was not being executed, due to an
incorrect usage of the infrastructure. Moreover, it did not patch
prefix/exec_prefix in sdl-config as is needed. In addition to that, we
remove the -Wl,-rpath option from sdl-config, since it is not needed.
This fixes at least the build of sdl_image, and probably of other sdl
components as well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make sure --enable-video-directfb=no gets passed to configure
if directfb isn't enabled, so sdl doesn't try to link with the
host version instead (if available).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Changes by Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* Installation to target is the default
* Remove SDL_EXTRA_CFLAGS, unused
* Remove reference to SDL_DIRECTFB_INCLUDES, unused
* Remove strip, done globally
Signed-off-by: cmchao <cmchao@gmail.com>
If SDL is built before tslib, then SDL can't detect it at configure
time and so touchscreen's support in SDL is crappy.
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We have been passing -q to ./configure when using 'make -s' for
packages using Makefile.autotools.in for some time. Do the same
for packages using autotools, but not using the
Makefile.autotools.in infrastructure, taking care to not do it
for packages with hand written configure scripts.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A C library will have been built by the toolchain makefiles, so there is no
need for packages to explicitly depend on uclibc.
Signed-off-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Patch sdl-config rpath setting rather than setting exec-prefix and
using DESTDIR as the SDL makefile uses prefix for some files,
and exec-prefix for others leading to double $(STAGING_DIR) prefix.
