samba4 picks up dbus as dependency if it was built before:
Checking for dbus : yes
Checking for header dbus/dbus.h : yes
Checking for library dbus-1 : yes
There is no configure option to control dbus support so we just make
sure dbus is built before samba4 to have reproducible builds.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch allows building samba4 with uClibc again after rpc support
was removed from uClibc. Building with musl is still broken:
The first error
../nsswitch/wins.c: In function ‘_nss_wins_gethostbyname_r’:
../nsswitch/wins.c:272:15: error: ‘NETDB_INTERNAL’ undeclared (first use in this function)
*h_errnop = NETDB_INTERNAL;
^~~~~~~~~~~~~~
../nsswitch/wins.c:272:15: note: each undeclared identifier is reported only once for each function it appears in
../nsswitch/wins.c:349:14: error: ‘NETDB_SUCCESS’ undeclared (first use in this function)
*h_errnop = NETDB_SUCCESS;
^~~~~~~~~~~~~
could be solved by applying
https://git.alpinelinux.org/cgit/aports/tree/main/samba/netdb-defines.patch
but then the build fails at
../ctdb/tests/src/test_mutex_raw.c: In function ‘main’:
../ctdb/tests/src/test_mutex_raw.c:170:28: error: ‘pthread_mutex_t {aka struct <anonymous>}’ has no member named ‘__data’
printf("pid=%u\n", mutex->__data.__owner);
^~
Therefore we disable musl support until a fix can be found.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas:
- instead of setting SAMBA4_CONF_ENV within the libtirpc condition,
introduce SAMBA4_CFLAGS and SAMBA4_LDFLAGS variables and use them
- add missing dependency on host-pkgconf, needed because we call
pkg-config to get the flags from libtirpc]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that binutils 2.29 has been introduced, and we have moved to
2.28.1 as the default version, it is time to drop support for binutils
2.26.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that binutils 2.29 has been released, it is time to move to
binutils 2.28.x as the default binutils version, instead of 2.27.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Both our target and host gdb depend on ncurses (host-ncurses for
host-gdb, of course). However, while for the target we passs
--with-curses, we are not doing this for the host variant. Due to
this, host-gdb default to using the termcap library: if such a library
is available on the build system, it will be used instead of the
host-ncurses we have built. This causes the host gdb binary to depend
on a library that we do not provide in $(HOST_DIR), breaking the
principle of a standalone SDK (which should only depend on the C
library).
To solve this, we simply pass --with-curses in HOST_GDB_CONF_OPTS,
which forces host-gdb to use the host-ncurses library.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
UTF-8 formatted file breaks installations on some systems:
Traceback (most recent call last):
File "setup.py", line 34, in <module>
long_description=open('README.rst').read() + '\n\n' + open('HISTORY.rst').read(),
File "/home/peko/autobuild/instance-1/output/target/usr/lib/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc2 in position 1125: ordinal not in range(128)
This patch replaces '§' with 'S' meaning 'Section' and hence converts file to plain ASCII.
Fixes:
http://autobuild.buildroot.net/results/4189b2ddcd3d59c629af78e4d455a29c77f8c683/
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: add autobuilder reference.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Our current skeleton is tailored to sysv-like init systems; it is not
fit for systemd-based systems. So, in upcoming changes, we'll add
another skeleton for systemd.
This means we can no longer have the current skeleton default to 'y', or
it would be enabled also for systemd, which would be incorrect.
So, we remove the default to 'y' but have it selected by the default
skeleton choice.
However, we do not yet have a way to directly build (really, install)
the custom skeleton, it is built (really, installed) as a dependency of
the default skeleton. So we must also forcibly select the default
skeleton when using a custom one.
Until we have the means to do only one or the other; i.e. when we have a
virtual skeleton.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Setting the root pasword is done in a target-finalize hook, so we do not
need to enforce a dependency from the skeleton onto host-mkpasswd.
Dropping that dependency will simplify making skeleton a virtual
package (in up-coming changes).
Instead, it is now selected as any other package. As such, it is
guaranteed to be built before target-finalize.
This however introduces a slight change in behaviour: previously,
host-mkpasswd would only be built if we needed to hash the root password
from its plain-text value. Now, host-mkpasswd is always built as soon as
the root password is non-empty, even if already pre-hashed.
Since host-mkpasswd is a really tiny weeny package bundled in Buildroot,
with only two C files, built as a single unit with a single gcc call,
the overhead is really minimal. Compared to the simplifications this
will allow in the skeleton packages (plural: common, sysv, systemd,
custom) to come, this overhead is acceptable.
Yet another simplification, even if small, to ease providing multiple
skeletons.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This resolves a QML issues reported in
https://bugreports.qt.io/browse/QTBUG-61522 that will be fixed in the
5.9.2.
Signed-off-by: Petar Koretic <petar.koretic@qaap.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commmit adds an option to remove admin panel to save
speace if not needed.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
[Thomas: fix indentation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit moves the password generation as a post build step.
This prepares the option to remove the admin panel from
installation.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit exclude some useless files from standard installation to
save space on embedded systems.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since version 0.6, libcodec2 switched buildsystem from autotools to
cmake.
The patches in the libcodec2 directory were removed because they were
only relevant to the autotools build, but another patch was added to
fix the codec2.pc file being installed.
For the cmake package unittests are disabled by default. The download
site is changed to http://files.freedv.org/codec2. An option is added
to be able to install examples to target.
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
[Thomas: switch to 0.7, add patch to fix .pc file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All patches from binutils 2.28 are kept, except patch
0906-microblaze-pr21180.patch, because it has been merged upstream as
of commit bd757ca7bf5886a4025ca02093fca1b8c5ce11a2. Other patches are
slightly adapted to differences that appeared in binutils 2.29.
The patches are now all Git formatted, so instead of having weird
sequence numbers, they have normal sequence numbers starting from 0001
and incrementing.
Since binutils 2.29 is now available as a .tar.xz tarball, we use this
format instead of .bz2 used for previous versions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
binutils 2.28.1 is a bug-fix release of the 2.28.x branch, so let's
switch to it.
Since a xz-compressed tarball is available, we use it instead of the
bz2-compressed one.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default audio backend for qemu is configured at compile time. It
generates annoying warning messages to qemu's stderr when running our
tests, like these:
pulseaudio: set_sink_input_volume() failed
pulseaudio: Reason: Invalid argument
pulseaudio: set_sink_input_mute() failed
pulseaudio: Reason: Invalid argument
Explicitly set the audio backend to "none" at runtime to remove those
messages from our logs. There is no command line argument for this, so
use an environment variable when starting qemu.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sometimes when a test fails in a gitlab pipeline the reason of the
failure cannot be determined using only the logfile.
Add the modified rootfs as an artifact of the job to improve
troubleshooting. To accomplish this, always use -k option from the test
infra, unconditionally add the resulting images to the artifacts, and
let the runner do the cleanup for us.
These artifacts can also be useful when a test fails locally but pass at
gitlab runners.
When the test does not generate a image, this message is displayed in
the runner log:
WARNING: test-output/*/images/*: no matching files
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
lapack does not support in-source builds anymore:
ea081254b4
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream switched to CMake, host-pkgconf is not needed anymore.
Instead of using the latest release 1.1.6 we use current git HEAD
because it contains important patches:
"Support both static and shared library CMake builds."
c756f7f5d9
"Redo CMake configuration", this commit allows to disable building
Snappy's own tests.
be6dc3db83
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
lib in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter l in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter k in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter j in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter i in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter h in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter g in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter f in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter e in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Busybox 1.17.1 has added built-in TLS support. Unfortunately, it fails
to build on i686 with gcc 4.8, with:
networking/tls_pstm_mul_comba.c: In function 'pstm_mul_comba':
networking/tls_pstm_mul_comba.c:82:1: error: 'asm' operand has impossible constraints
asm( \
^
networking/tls_pstm_mul_comba.c:279:4: note: in expansion of macro 'MULADD'
MULADD(*tmpx++, *tmpy--);
^
make[3]: *** [networking/tls_pstm_mul_comba.o] Error 1
make[2]: *** [networking] Error 2
Since TLS support is a new feature in 1.27, and wasn't present until
now, let's disable it to avoid the build failure.
The bug has been reported upstream at
http://lists.busybox.net/pipermail/busybox/2017-July/085713.html.
Fixes:
http://autobuild.buildroot.net/results/d973f9a2fbf0f52104f4943b902183e9dbf163a7/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
[Thomas: minor tweaks in Config.in file, adjust .mk file for
static+shared build.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The SF page redirects to gnome.org.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
