Commit 9696d27756 "package/gpsd: condition python stuff to the proper
kconfig option" changed the condition in which the gpsd python scripts
are installed. After that change, the "gpsfake" command (which is a
python script) is no longer found and the runtime test is failing.
This commit fixes the issue by reflecting the change in the runtime
test Buildroot configuration.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b6f4d79df21b2affa1ccc5133c44647072d21058)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The mysql virtual package was removed in commit 8708f3a23a
"package/mysql: drop virtual package".
The mariadb runtime test was authored before this mysql virtual
package removal, but was merged after it, in commit 5356754d1e
"support/testing: add mariadb runtime test". Due to this, this test
always failed with the error:
Makefile.legacy:9: *** "You have legacy configuration in your .config! Please check your configuration.". Stop.
This commit fixes the issue by removing the legacy
BR2_PACKAGE_MYSQL=y configuration directive.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7540345406
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 3da3361a1b9cafb274dac776693720fe20f6681b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Runtime tests running on test runners are subject to a high
variability in term of performance and timing. Most or the runtime
test commands are executed with a timeout, in pexpect.
Slow or very loaded test runners can use the timeout_multiplier to
globally increase those timeouts.
Some runtime test commands sometimes needs to poll or query a state,
rather than having purely sequential actions. It is sometimes hard to
know, from the test writer point of view, the maximum timeout to set, or
if a retry logic is needed.
In order to help debugging runtime tests failing due very slow
execution, this commit adds extra information on the host test runner
about its load in the run log. Relevant information are: number of
cpus, the load average at the moment the emulator is started and the
current timeout_multiplier.
Note: this change was discussed in:
https://lists.buildroot.org/pipermail/buildroot/2024-July/759119.html
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 7a6edbc7b9166c799b43cf9a9b78422c8e20ccc0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The gpsfake command line has a typo (a missing space), which makes the
next gpsctl command to always fail.
This commit fixes the issue by adding the missing space.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/7391792948
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 49156a0fa4a48d5d80f03c3854f631f312b486d4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2fe638af2632424b826843675311f9a258a57b71)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To give us a chance to catch runtime issues (such as missing
dependencies) more easily, add a test that writes a sample PDF file,
read it back and verify the text that was read.
Like similar packages that lead to a big
rootfs (e.g. python-botocore), this test requires a separate ext2
rootfs to avoid filling the default amount of RAM available
entirely (which would cause missing files from the root filesystem and
in turn, test failures).
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 115e9493b8e3b50cd56b93c47d669319d02698a7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Marcus Hoffmann <buildroot@bubu1.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 21da0df09db09700948c27782d0bb446a0ad66f8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When running a test that uses host-python-setuptools using the Buildroot
Docker image, for example running the following command,
> ./utils/docker-run ./support/testing/run-tests -o output -s -k tests.package.test_python_pytest.TestPythonPy3Pytest
The build fails with the following error,
> File "/home/blmaier/buildroot/output/TestPythonPy3Pytest/build/host-python-setuptools-69.2.0/setuptools/_distutils/dist.py", line 354, in _gen_paths
> yield pathlib.Path('~').expanduser() / filename
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> File "/home/blmaier/buildroot/output/TestPythonPy3Pytest/host/lib/python3.11/pathlib.py", line 1385, in expanduser
> raise RuntimeError("Could not determine home directory.")
> RuntimeError: Could not determine home directory.
>
> ERROR Backend subprocess exited when trying to invoke get_requires_for_build_wheel
Python setuptools is looking for $HOME but failing to find it.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit 4dafb8b5c2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No functional change as we install a python symlink, but use python3 for
consistency with the other scripts.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
(cherry picked from commit ed9288505c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The python-magic-wormhole runtime test can randomly fail on slow
runners, see [1].
The issue is that the sending command is started first in background
_without_ redirecting its output to /dev/null. The receiving command
is started after, expecting the message to be printed on the first
standard output line. On slower systems, the sending command still
print messages while the test controller expect output from the
receiving command. The expected string finally appear, but not on the
first line. This makes the test fail.
This commit fixes the issue by redirecting all outputs (stdout, stderr)
of the sending command to /dev/null. To help even more, the sleep time
is moved from the emulator to the test controller. The sleep time is
also multiplied by the timeout_multiplier.
Fixes: [1]
[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/6888691508
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
(cherry picked from commit 9a734700d7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The lvm2 package now enables the required Kernel configuration. The
Kernel config fragment included in this test is no longer needed.
This commit removes it.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9339343111)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The CPIO filesystem generated by TestPerlDBDmysql is too large, and
doesn't fit as an initramfs in the 256MB of RAM available in the
versatilepb machine. This causes a failure while running a basic
test "perl -MDBI -e '1'" since "/usr/lib/perl5", and many files
being missing from the root filesystem, ultimately causing the test
to fail.
Can't locate DBI.pm in @INC (you may need to install the DBI module)
(@INC entries checked: /usr/lib/perl5/site_perl/5.38.2/arm-linux
/usr/lib/perl5/site_perl/5.38.2 /usr/lib/perl5/5.38.2/arm-linux
/usr/lib/perl5/5.38.2).
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6735654506
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 8937cd065c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the toolchain Bootlin update to 2023.11-1 [1], the arm Linux
kernel build is broken with binutils >= 2.41 with:
arch/arm/mm/proc-v7.S: Assembler messages:
arch/arm/mm/proc-v7.S:640: Error: junk at end of line, first unrecognized character is `#'
A similar issue has already be fixed for qemu m68k [2].
Bump to the latest kernel 4.19 that already include the backport
of 790756c7e022 ("ARM: 8933/1: replace Sun/Solaris style flag on section directive")
[1] 7e0e6e3b86
[2] a1ce9474e4
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6703222383
Signed-off-by: Romain Naour <romain.naour@smile.fr>
(cherry picked from commit 7e126bd38d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The commit [1] updated the u-boot version with the one used by
orangepi_zero_plus2_defconfig but the dependency on openssl
was forgotten.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6703221868
[1] eb16148ddd
Signed-off-by: Romain Naour <romain.naour@smile.fr>
(cherry picked from commit bc75b09b1c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
TestATFVexpress is using vexpress_aemv8a_juno as as u-boot defconfig
but the Buildroot defconfig of this board was removed in 2022.11 [1]
Since both TestATFVexpress and TestATFAllwinner are now using mainline
ATF, we don't really need several ATF test anymore. Initially [2],
several runtime test were added to test ATF/U-Boot combinations when
ATF was provided by a vendor: vexpress (mainline), Allwinner and
Marvell.
Keep TestATFAllwinner as ATF mainline test.
[1] 347c108738
[2] 8cf3ce04e9
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 107bcd536d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
u-boot-2021.04 seems to be broken when pylibfdt support is enabled
and the latest python3/setuptools are used.
Since the TestATFAllwinner is using bananapi_m64 as u-boot defconfig
but the Buildroot defconfig of this board was removed in 2022.11 [1]
update TestATFAllwinner to use a newer BSP. Use the one provided
by orangepi_zero_plus2_defconfig.
[1] daf3c6661f
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6477656317 (TestATFAllwinner)
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit eb16148ddd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the toolchain Bootlin update to 2023.11-1 [1], the arm Linux
kernel build is broken with binutils >= 2.41 with:
arch/arm/mm/proc-v7.S: Assembler messages:
arch/arm/mm/proc-v7.S:640: Error: junk at end of line, first unrecognized character is `#'
A similar issue has already be fixed for qemu m68k [2].
Bump to the latest kernel 4.19 that already include the backport
of 790756c7e022 ("ARM: 8933/1: replace Sun/Solaris style flag on section directive")
[1] 7e0e6e3b86
[2] a1ce9474e4
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/6414160106 (TestFileCapabilities)
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 07ef00df9b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The trace-cmd runtime test has a typo and fails with output:
Traceback (most recent call last):
File "/build/buildroot/support/testing/tests/package/test_trace_cmd.py", line 53, in test_run
self.assertEquals(exit_code, 0)
^^^^^^^^^^^^^^^^^
AttributeError: 'TestTraceCmd' object has no attribute 'assertEquals'. Did you mean: 'assertEqual'?
The issue can be reproduced with the command:
support/testing/run-tests \
-d dl -o output_test \
tests.package.test_trace_cmd
This commit fixes the issue by removing the extra 's'.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 2f507f1da5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
codesourcery arm/aarch64 toolchains are old (2014) and use glibc
2.18/2.20 which are not compatible with 64-bit time_t raising the
following build failure with libcgroup since commit
1c2dbcdcf0:
In file included from ./libcgroup-internal.h:25:0,
from parse.y:21:
/home/buildroot/autobuild/run/instance-3/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/fts.h:41:3: error: #error "<fts.h> cannot be used with -D_FILE_OFFSET_BITS==64"
# error "<fts.h> cannot be used with -D_FILE_OFFSET_BITS==64"
^
Fixes: 1c2dbcdcf0
- http://autobuild.buildroot.org/results/e28f955f2b360f6e7bb231a5a3800cfbd17a23d7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Peter: add Config.in.legacy entries]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 53a8c5150e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As expected by Peter in [1], the hardcoded 3 seconds for waiting the
RAID array to rebuild are not enough on slow test host runners. This
test already failed at least once for that reason, in [2].
In order to fix those failures, this commit adds extra logic to allow
several attempts, before failing. The timeout is currently set at 10
attempts, waiting 3 seconds between each attempts. To help even more,
those 3 seconds are also scaled with the timeout_multiplier.
Fixes: [2]
[1] https://lists.buildroot.org/pipermail/buildroot/2024-February/685034.html
[2] https://gitlab.com/buildroot.org/buildroot/-/jobs/6137469690
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
