The manual has this sentence for the dependency on a C library *and* a
toolchain feature:
foo needs an (e)glibc toolchain, or foo needs an (e)glibc toolchain
w/ C++ support
And then, just below, the comment text for C++ is just 'C++', not
'C++ support'.
Fix that, and add a bit of indentation too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For asciidoc, a string like '+these are some words+' will be displayed in
monospace font. Such sequences are identified by searching for a matching
pair of + signs in the same block.
The string 'C++' also contains such + signs. In most cases, this does not
pose a problem and no escaping is necessary. However, if 'C++' occurs twice
in the same block, the + signs will be matched to each other, and asciidoc
formats all text between them as monospaced text. In this case, escaping of
one of these 'C++' occurances is necessary to get the right formatting.
In one place of the manual, there is a sentence that causes such a problem:
"you only have to tell whether your toolchain supports C++ or not and
whether it has built-in RPC support. If your external toolchain uses
the 'uClibc' library, then you have to tell Buildroot if it supports
largefile, IPv6, RPC, wide-char, locale, program invocation, threads
and C++."
Commit 082dec8ce4 was based on a patch fixing
this problem in one place of the manual, but was incorrectly changed while
committing.
This patch reverts the incorrect changes in that commit, and solves the
problem correctly.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Asciidoc supports two syntaxes for section titles: two-line titles (title
plus underline consisting of a particular symbol), and one-line titles
(title prefixed with a specific number of = signs).
The two-line title underlines are:
Level 0 (top level): ======================
Level 1: ----------------------
Level 2: ~~~~~~~~~~~~~~~~~~~~~~
Level 3: ^^^^^^^^^^^^^^^^^^^^^^
Level 4 (bottom level): ++++++++++++++++++++++
and the one-line title prefixes:
= Document Title (level 0) =
== Section title (level 1) ==
=== Section title (level 2) ===
==== Section title (level 3) ====
===== Section title (level 4) =====
The buildroot manual is currenly using the two-line titles, but this has
multiple disadvantages:
- asciidoc also uses some of the underline symbols for other purposes (like
preformatted code, example blocks, ...), which makes it difficult to do
mass replacements, such as a planned follow-up patch that needs to move
all sections one level down.
- it is difficult to remember which level a given underline symbol (=-~^+)
corresponds to, while counting = signs is easy.
This patch changes all two-level titles to one-level titles in the manual.
The bulk of the change was done with the following Python script, except for
the level 1 titles (-----) as these underlines are also used for literal
code blocks.
This patch only changes the titles, no other changes. In
adding-packages-directory.txt, I did add missing newlines between some
titles and their content.
----------------------------------------------------------------------------
#!/usr/bin/env python
import sys
import mmap
import re
for input in sys.argv[1:]:
f = open(input, 'r+')
f.flush()
s = mmap.mmap(f.fileno(), 0)
# Level 0 (top level): ====================== =
# Level 1: ---------------------- ==
# Level 2: ~~~~~~~~~~~~~~~~~~~~~~ ===
# Level 3: ^^^^^^^^^^^^^^^^^^^^^^ ====
# Level 4 (bottom level): ++++++++++++++++++++++ =====
def replace_title(s, symbol, replacement):
pattern = re.compile(r'(.+\n)\%s{2,}\n' % symbol, re.MULTILINE)
return pattern.sub(r'%s \1' % replacement, s)
new = s
new = replace_title(new, '=', '=')
new = replace_title(new, '+', '=====')
new = replace_title(new, '^', '====')
new = replace_title(new, '~', '===')
#new = replace_title(new, '-', '==')
s.seek(0)
s.write(new)
s.resize(s.tell())
s.close()
f.close()
----------------------------------------------------------------------------
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The manual now features a new section with instructions about how to add a
virtual package.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[yann.morin.1998@free.fr: move down statement about provider's .mk]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages need a host-python interpreter with a version different
from the one installed in the target to run some build scripts (eg.
scons requires python2 to run, to build any kind of packages even if
the python interpreter selected for the target is python3).
In such cases, we need to add the right host-python dependency to the
package using the host-python-package infrastructure, and we also want
to invoke the right host python interpreter during the build steps.
This patch adds a *_NEEDS_HOST_PYTHON variable that can be set either
to 'python2' or 'python3'. This variable can be set by any package
using the host-python-package infrastructure to force the python
interpreter for the build. This variable also takes care of setting
the right host-python dependency.
This *_NEEDS_HOST_PYTHON variable only affects packages using the
host-python-package infrastructure.
If some configure/build/install commands are overloaded in the *.mk
file, the right python interpreter should be explicitly called.
If the package defines some tool variable (eg.: SCONS), the variable
should explicitly call the right python interpreter.
[Thomas:
- fixes to the commit log and documentation suggested by Yann
- rename the variable from <pkg>_FORCE_HOST_PYTHON to
<pkg>_NEEDS_HOST_PYTHON, as suggested by Yann
- do not allow any other value than python2 and python3 in
<pkg>_NEEDS_HOST_PYTHON, as suggested by Yann.]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix to actually use the correct syntax.]
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The manual always uses the format with multiple dependencies. This only
add an example where is a single dependency to show that this format is
applicable regardless of the number of dependencies.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we use Google+ to share our news, this add a logo on the menu bar,
which links to the Buildroot profile.
[Peter: change link to Buildroot account]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the migration of the toolchains to the generic package
infrastructure, it is no longer used.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Because now the toolchain dependency is automatically added by the
package infrastructure the BASE_TARGETS variable is useless so just
remove it.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch updates the commit message template provided in the manual.
The new template emphasizes the importance of providing a description of the
problem, the root cause, and the solution, and the fact that all this should
be wrapped at 72 characters.
Suggested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch makes some minor fixes in the section about reporting bugs.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the manual states that if you send a series and include a
changelog in the introduction mail (0 of x), it is not necessary to include
a changelog on the individual patches.
This is not always convenient: for large patch series it requires going back
to the introduction mail when opening each patch, to understand what
changed.
This patch rewords the paragraph accordingly.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch makes some minor changes to the section about submitting patches.
Content-wise there are little changes.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds a small section about working on items from the TODO list.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch moves the section about patch reviews and the
Tested-by/Reviewed-by/Acked-by tags upwards. Additionally, the first
paragraph is removed and replaced by another one. There are no other changes
in the text.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch moves the section about autobuild fixing up, and expands it with
more details about what autobuilds are, and how you can help with it.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The user-facing variables should be prefixed with BR2_, not BR_.
Also quote the variable in the manual.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds a small section to the manual promoting the reproduction,
analysis and fixing of bug reports.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch expands the introduction of the "Contributing to buildroot"
section. In general, the intention of this and subsequent patches is to
promote non-feature contributions, like autobuild fixes, bug report
analysis, TODO list work, etc.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A new menu and logo for the website, also some of the contents has been
reworked.
This patch also removes files that are no longer used, like the old
stylesheet and a few pages. The content of theses pages has mostly been
merged in other pages or was redudant with the manual.
[Thomas: integrate a few typo fixes noticed by Thomas De
Schampheleire]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add some specific Javascript to display commit and mailing recent
entries. Note that the git commit mail are ignored. Also load Google
Analytics.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add Bootstrap framework, along with JQuery.
Theses files were downloaded from:
- http://getbootstrap.com
- http://jquery.com/
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move the README file from the subdirectory doc to the root.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch updates the manual with more clarified descriptions of tags
Tested-by, Reviewed-by, and Acked-by, as discussed on the Buildroot
developer days in February 2014.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There was one instance of DL_DIR that was left out. Fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit fixes a few minor spelling or grammar mistakes since the recent
additions to the manual (commits 0b100de2cf to
7cbb476661).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: adjust wording as suggested by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ELDK now relies on Yocto, so it no longer has the funky
non-standard way of doing multilib. Also, we didn't mention that Yocto
toolchains/SDK are not suitable for usage with Buildroot. Therefore,
this commit rewords this part of the documentation to explain that
Yocto/OpenEmbedded SDKs cannot be used as external toolchains in
Buildroot, and why.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Replace ADI by Analog Devices, which is clearer for most people, and
remove the Xilinx external toolchains since we have deprecated them.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have eglibc and glibc support in the internal backend, and
no longer marked as experimental, a little bit of rewording is
needed. It is no longer necessary to indicate that uClibc was
historically supported as the only C library, and that the glibc
support is experimental. We also update the rest of the description to
be less uClibc specific.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: adjust wording as suggested by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is no need to tell people that they should remove stamp files: they
should use the make <pkg>-reconfigure and make <pkg>-rebuild make targets
instead. We still keep an explanation about stamp files, just to give the
user an insight on how Buildroot works internally.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using a relative path for O=... has limitations, since it is interpreted
relative to the Buildroot tree, and thus may lead to unexpected results.
For example, running this:
make -C buildroot O=my-O
will not create my-O in the current working directory, but as a
sub-directory of the Buildroot tree, here in buildroot/my-O
Explain this in the manual (as is similarly done for BR2_EXTERNAL).
Also add a note that $(O) will be created if missing.
Also change O=.. and -C .. to O=<...> and -C <...> to make it explicit
this is an ellipse, not a relative path.
Reported-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Although it is possible to use relative paths, there are a few pitfalls
when doing so.
To avoid confusion for a (newcoming) user, use absolute paths in the
manual (as is done in examples for $(O)), since it is guaranteed to be
working without corner cases.
[Peter: s/relatively/relative/ as suggested by Thomas]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It comes up every now and then on the list, so better be prepared to
point at the manual, rather than rehash the same every time.
Most of the chapter is a copy-paste of the report from the Buildroot
Developpers Day in Pragues, 2011-10-28:
http://lists.busybox.net/pipermail/buildroot/2011-November/047229.html
We consider the opinions expressed in that report to be still valid
now, two years later.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a small icon that links the Buildroot home page to our Google+
page.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch updates the /dev management section in the manual with information
about eudev, which replaces udev.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch converts udev to a virtual package. For the moment, there is only
one provider for the udev features: eudev.
Packages meant to provide udev-like features must select the symbol
BR2_PACKAGE_HAS_UDEV.
Packages depending on BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV or
BR2_PACKAGE_UDEV have been converted to use the new symbol.
[Peter: move legacy symbols under 2014.05]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As the e-mail address buildroot@buildroot.org is now enabled, update the
e-mail addresses in the source tree from @uclibc.org and @busybox.net to our
own proper domain.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To make the naming consistent (all user-visible options should be
prefixed with BR2_).
An entry is added to Makefile.legacy to warn users who have set
BUILDROOT_CONFIG but not BR2_CONFIG.
Still export BUILDROOT_CONFIG but pointing to some phony value, to
make sure that scripts that still use it fail in a predictable way.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To make the naming consistent (all user-visible options should be
prefixed BR2_).
An entry is added to Makefile.legacy to warn users who have set
BUILDROOT_DL_DIR but not BR2_DL_DIR.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The manual is a bit vague about whether Config.in and external.mk
are mandatory or optional.
Make it explicit in the manual that they are mandatory.
Reported-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Try to clarify how the wrapper passes arguments and why.
This is mainly because the output you can see when you build, does not
reflect what is invoked by the wrapper.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: s/Hangout/Hangouts/, line wrap]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is not buildroot convention to align the = signs in .mk files, so this
shouldn't be suggested in the manual.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter has just pointed me to the PGP signatures of the release tarballs,
which exist since he's been doing releases.
This was not obvious to me that the releases were signed, as there was
no info about it on the website.
So, add such links on the downloads page.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[yann.morin.1998@free.fr: some cleanups and rephrasing]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported by Ryan, it is not well-known that most tools can deal
efficiently with big sparse files.
Add a section in the manual about this, with tar and cp used as
examples, and a hinting to the man pages for the others.
Reported-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ryan Barnett <rjbarnet@rockwellcollins.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the manual uses the last modification date and time of
manual.txt in the generated manual.
This is confusing, especially for long-checked-out repositories where
the top-level manual.txt has not changed since the check out. Moreover,
the manual explicitly states 'generated on', which is confusing at best.
Use the current date and time instead.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If U-Boot patches are nested under BR2_GLOBAL_PATCH_DIR, then the
subdirectory should be called "uboot", and not "u-boot".
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Apache licenses are referred to in a variety of ways; standardise these,
choosing a form which does not contain whitespace.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
PDF files can not be easily embedded in other documents (eg. ODT, or HTML).
Add support for generating PNG graphs, by setting the GRAPH_OUT=pdf|png on
the command line:
make GRAPH_OUT=png graph-build graph-depends
The default is still to generate PDF graphs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Generate the build-time graphs by calling:
make graph-build
This generates the graphs in $(O)/graphs/
It is possible to use the alternate color-scheme by setting the variable
GRAPH_ALT=1 on the command line:
make GRAPH_ALT=1 graph-build
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Updating the documentation to reflect that multiple directories can
now be specified for BR2_GLOBAL_PATCH_DIR. Along with giving an
example use case of how to use multiple global patch directories.
[Thomas: fix minor typo mentionned by Thomas De Schampheleire.]
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Peter: fix s/BUILD_TYPE/SETUP_TYPE/ typo in manual as noted by Samuel]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Shawn Landden <shawn@churchofgit.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To make it clear to the user that these options are external to Buildroot
and no support is provided by the Buildroot community.
With this, there's no need to recommend people to their options inside
a menu, so remove that from the documentation.
Kconfig nicely allows us to hide the menu completely if BR2_EXTERNAL isn't
used, so make use of that to not confuse people. It would be nice if we
could add some help text to explain the BR2_EXTERNAL stuff as well, but
that isn't supported on menus :/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit updates the manual to add details on how to use the
BR2_EXTERNAL feature.
[Peter: minor tweaks, fix asciidoc tag as pointed out by Samuel]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Acked-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit introduces the BR2_EXTERNAL environment variable, which
will allow to keep Buildroot customization (board-specific
configuration files or root filesystem overlays, package Config.in and
makefiles, as well as defconfigs) outside of the Buildroot tree.
This commit only introduces the variable itself, and ensures that it
is available within Config.in options. This allows us to use
$BR2_EXTERNAL in a 'source' statement in Config.in.
Following patches extend the usage of BR2_EXTERNAL to other areas
(packages and defconfigs).
In details, this commit:
* Introduces the BR2_EXTERNAL Kconfig option. This option has no
prompt, and is therefore not visible to the user and also not
stored in the .config file. It is automatically set to the value of
the BR2_EXTERNAL environment variable. The only purpose of this
BR2_EXTERNAL Kconfig option is to allow $BR2_EXTERNAL to be
properly expanded when used inside Kconfig source statements.
* Calculates the BR2_EXTERNAL value to use. If passed on the command
line, then this value is taken in priority, and saved to a
.br-external hidden file in the output directory. If not passed on
the command line, then we read the .br-external file from the
output directory. This allows the user to not pass the BR2_EXTERNAL
value at each make invocation. If no BR2_EXTERNAL value is passed,
we define it to support/dummy-external, so that the kconfig code
finds an existing $(BR2_EXTERNAL)/package/Config.in file to
include.
* Passes the BR2_EXTERNAL into the *config environment, so that its
value is found when parsing/evaluating Config.in files and .config
values.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Tested-by: "Samuel Martin" <s.martin49@gmail.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: splitted from Mischa original commit]
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Python saves a pre-compiled support/scripts/kconfiglib.pyc file
side-to-side with the corresponding .py file.
This does not work if the Buildroot source tree is read-only (but
this is not an error for Python, which keep going OK).
But this may cause issues for out-of-tree builds in case the same
Buildroot source tree is shared by many builds.
Also, 'make clean' currently does not clean this file, and out-of-tree
builds can remove it either, at the risk of causing issues for other
out-of-tree builds running at the same time.
Just tell Python not to generate .pyc files:
- call the script via python, don't use the sha-bang
- thus, make the script non-executable, and remove the sha-bang
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: keep clean comment as pointed out by Arnout]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current TOC level is set to 4, which does not mean 'a 4-level deep TOC',
but really means 'a TOC deep to the 4th level', with the first level being
level 0, which means we have:
12. Appendix
12.1. Makedev syntax documentation
12.2. Makeuser syntax documentation
12.3. Partition table layout description syntax
12.3.1. The global section
Properties for the global section
Which a bit too much. And yet, the fifth level is not shown, since we
don't have any! :-/
Limit the depth of the TOC to three levels, which is just enough to be
usefull, yet not cluttered by low-level titles.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Offer a little bit more visibility to the companies who sponsored us,
either by sponsoring the developer days, or development
boards. Hopefully this will encourage other companies to do the same :)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: drop 'the' before FOSDEM]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Allow user to supply their own step-hooks by passing a variable
on the make command-line:
make BR2_INSTRUMENTATION_SCRIPTS=/path/to/my/script
This can be useful to run site-specific actions at each step of the
build process, such as logging installed, removed or modified files,
do sanity checks on installed files...
It is possible to call more than one script, by passing a space-separated
lists of scripts to call.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also export BUILD_DIR for post-{build,images} hooks, so they do have
a place to store generated files.
Note: this will be more einteresting for the instrumentation of steps,
to come in a later patch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building host-bison needs perl 5.8.7+, as it uses the "-f" option
for site customization scripts. This feature was added in 5.8.7.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Split out the information on hooks to a separate section (and source file).
Not only because the hooks are useful for all infrastructures (and thus
don't really fit specifically in the generic infrastructure section), but
also for clarity when the info on hooks will be expanded in later patches.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
One of the use cases is for the 'local packages' to restore
the SCM info. Some packages use this information to generate
version info during build time. In this case, the local package
can have this hook to restore it by symbolic link for example.
[Thomas: update commit title]
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Mention all supported C libraries by the internal Buildroot toolchain
backend.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: Added ThomasDS Acked-by, which was given on an earlier
version of the same patch.]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
The output extension and the generation messages refer to 'text', but the make
target was confusingly 'txt'. This patch changes the make target for
consistency.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To generate the manual, you need a few tools. If these are not present,
pretty cryptic error messages are given.
This patch adds a simple check for these dependencies, before attempting to
build the manual.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
usage:
# set cache limit size
make CCACHE_OPTIONS="--max-size=5G" ccache-options
# zero statistics counters
make CCACHE_OPTIONS="--zero-stats" ccache-options
[Peter: drop the redundant ifeq]
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
$(BUILD_DIR) is a nice place to put files generated during the build.
With the advent of user-supplied step-hooks, they may want to store
some information on the build.
Export BUILD_DIR to that effect; update manual accordingly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adding more documentaiton based on discussion from the mailing list
in regards the buildroot review process and how patchworks can be
used to pull in patches for testing purposes.
Mailing list discussion:
http://lists.busybox.net/pipermail/buildroot/2013-September/078170.html
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the comments in Config.in files when depending on toolchain
options are not at all lined up. This patch adds a section to the
documentation that explains which format is to be used.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The original titles did no longer correspond with the actual menu names.
Additionally, choose a name that better reflects the fact that this is a
list.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Converting the external toolchain logic into a package raises a very
special use case that wasn't handled by the package infrastructure:
the Blackfin toolchain is delivered as two tarballs instead of
one. Unfortunately <pkg>_SOURCE only allows to pass one tarball name.
However, we really want both tarballs to be known by the package
infrastructure, so that the normal 'source' and 'external-deps'
mechanism work fine.
In order to achieve this, we add a <pkg>_EXTRA_DOWNLOADS variable,
which allows a package to list other stuff it would like to see
downloaded, but that are otherwise not used by the package
infrastructure itself: it is up to the package to do it by itself.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: remove a few more ctng references in customize-store.txt]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a 'Known issues' chapter, which lists the exceptions I have
currently in the autobuilder scripts to avoid known problems from
occuring. I believe it is more useful to document them rather than
keeping them hidden in my autobuilder script.
[Peter: s/either/either use/]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In case there are many arguments passed to the tools, the command line
can get very long, and difficult to parse visually.
For example, the Linux kernel passes a lot of arguments to gcc (at least
45, which gives 53 with our hard-coded args). Looking at such a command
line is daunting.
So, add the possibility to print each argument on its own line.
Also, enclose all args between single quotes, so the command line
can be safely copy-pasted without special chars (spaces, $) being
inrerpreted by the shell.
Add blurb about toolchain-wrapper to documentation at the same
time.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When generating the manual, you see following messages:
>>> Generating HTML manual...
>>> Generating Split HTML manual...
>>> Generating PDF manual...
>>> Generating Text manual...
>>> Generating EPUB manual...
and with this patch the capitalization is changed so that it becomes:
>>> Generating HTML manual...
>>> Generating split HTML manual...
>>> Generating PDF manual...
>>> Generating text manual...
>>> Generating ePUB manual...
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make consistent the capitalization and punctuation of Signed-of-by examples.
Signed-off-by: Ralph Siemsen <ralphs@netwinder.org>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: leave change xz tarball format to not end up with circular deps]
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make 3.82 no longer sort the result of wildcards (see
http://comments.gmane.org/gmane.comp.gnu.make.bugs/4260). This may break
build reproducibility.
This patch sort results of wildcards to ensure reproducibility.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: A.R.D. <contact@team-ard.com>
Cc: Willy Lambert <lambert.willy@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Improve the contribute manual section by adding an explanation about patch
review and version.
The section now provides advices in how to respond maintainers requests and how
to proceed on replying them.
[Thomas: further small modifications.]
Signed-off-by: Vinicius Tinti <viniciustinti@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Samuel: add precision about non-tar archive]
[Thomas: reword with more details. Fix commit title]
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It can be useful to have different configuration use the same post-build
and/or post-image scripts as they share a common infrastructure, but yet
have minor differentiation.
This option allows passing zero or more additional arguments to each
post-build or post-image script.
The same set of extra arguments are passed to all scripts, it is not
possible to pass different arguments to each script.
[Peter: fix help text, post-image gets called with the images dir]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The udhcp.busybox.net site is gone, it's now pointing to bugzilla.
udhcp has been a part of busybox for some time now.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
linuxdevices.com has been dead for some time now when it was bought out.
Switch to linuxgizmos.com which is the new page of the author.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: update manual to match]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since there is no need to edit the generated list, we don't need
to keep the files under git control, so remove the existing lists.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The generated lists are automatically updated when building the manual.
[Peter: fix typos]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: indentation, remove temp dir, intro to host utils]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: one more stuff->feature fixup]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Packages that install daemons may need those daemons to run as a non-root,
or an otherwise non-system (eg. 'daemon'), user.
Add infrastructure for packages to create users, by declaring the FOO_USERS
variable that contain a makedev-syntax-like description of the user(s) to
add.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Cam Hutchison <camh@xdna.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
awk, bison, flex, makeinfo, gettext should be built as dependencies of
packages when needed. In practice, even the toolchain build doesn't
need any of these, and only a few packages do require them.
It is not needed to list gzip and bzip2 since they are already checked
through ${DL_TOOLS}: whenever a package needs gzip or bzip2 for its
extraction, the dependency is added.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
At the Buildroot Developers Meeting (4-5 February 2013, in Brussels) a change
to the patch logic was discussed. See
http://elinux.org/Buildroot:DeveloperDaysFOSDEM2013
for details. In summary:
* For patches stored in the package directory, if
package/<pkg>/<version>/ does exist, apply package/<pkg>/<version>/*.patch,
otherwise, apply package/<pkg>/*.patch
* For patches stored in the global patches directory, if
$(GLOBAL_PATCH_DIR)/<pkg>/<version>/ does exist, apply
$(GLOBAL_PATCH_DIR)/<pkg>/<version>/*.patch, otherwise, apply
$(GLOBAL_PATCH_DIR)/<pkg>/*.patch
This patch adds the new BR2_GLOBAL_PATCH_DIR configuration item, and reworks
the generic package infrastructure to implement the new patch logic.
[Peter: fixup doc nits as pointed out by Thomas]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* update post-build scripts mechanism that now support several scripts
* fix formatting
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: Drop *.patch.<arch> description as noted by Thomas]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
