Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
[yann.morin.1998@free.fr:
- move before skeletons
- select the custom 'mine' skeleton, not the sysv one
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
[yann.morin.1998@free.fr:
- alphabetical order (skeleton before toolchain)
- leave the list of choices 'open'
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add documentation about how to use SELinux in Buildroot, and what are
the available mechanisms to extend and customize the SELinux policy.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
[Thomas: misc improvements.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The manual has a section on adding board support to upstream buildroot,
but it fails to mention some of the things we expect. Add more of them.
- Internal toolchain.
- Beautify defconfig file.
- Fixed versions for components.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr:
- use +monospace+ for the variables
- use _italic_ for sections in defconfig
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
There is no debug profile on cargo. The available profiles are: dev
(enabled by default), release, test and bench.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since Gitlab 12.9, Gitlab allow to trigger child pipeline with generated configuration file.
See: https://gitlab.com/gitlab-org/gitlab/-/issues/35632
This allow us to stop updating the .gitlab-ci.yml file when a
new defconfig is added to Buildroot.
Remove check-gitlab-ci.yml job since it is now uneeded.
Remove .gitlab-ci.yml make target.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
[ann.morin.1998@free.fr: manual: no longer needed to update at all]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As Cargo is either installed by host-rust or host-rust-bin, the
Cargo-based packages should depend on host-rustc.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
[Arnout: also select HOST_RUSTC in Config.in]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: David Pierret <david.pierret@smile.fr>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Describe release engineering and development phases of the project.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the linux kernel will apply some fixups on its .config file,
based on whether some packages are enabled or not. That list of
conditional fixups is getting bigger and bigger with each new package
that needs such fixups, culminating with the pending firewalld one [0].
Furthermore, these fixups are not accessible to packages in br2-external
trees.
Add a new per-package variable, that packages may set to the commands to
run to fixup the kernel .config file, which is added at the end of the
linux' own fixups.
This opens the possibility to write things like;
define FOO_LINUX_CONFIG_FIXUPS
$(call KCONFIG_ENABLE_OPT,BLA)
endef
Of course, it also opens the way to run arbitrary commands in there, but
any alternative that would be declarative only, such as a list of
options to enable or disable (as an example):
FOO_LINUX_CONFIG_FIXUPS = +BAR -FOO +BUZ="value"
.. is not very nice either, and such lists fall flat when a value would
have a space.
For packages that we have in-tree, we can ensure they won't play foul
with their _LINUX_CONFIG_FIXUPS. For packages in br2-external trees,
there's nothing we can do; users already have the opportunity to hack
into the linux configure process by providing LINUX_PRE_CONFIGURE_HOOKS
or LINUX_POST_CONFIGURE_HOOKS anyway...
.. which brings the question of why we don't use that to implement the
per-package fixups. We don't, because _PRE or _POST_CONFIGURE_HOOKS are
run after we run 'make oldconfig' to sanitise the mangled .config.
[0] http://lists.busybox.net/pipermail/buildroot/2020-March/278683.html
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix a few punctuation mistakes. The removed link is redundant, see the
previous sentence.
Signed-off-by: Merlin Büge <merlin.buege@tuhh.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With autoconf packages, we often specify ac_cv_func_... cached values to
avoid runtime checks during configure. With meson the equivalent is
setting properties in cross-compilation.conf which we cannot do in
Buildroot at the moment.
For example, libglib2 used to set ac_cv_func_printf_unix98 and
ac_cv_func_vsnprintf_c99 so that the system printf could be used, but
with the conversion to meson these checks fail and the gnulib fallback
is used.
Add infrastructure in the same way as FOO_MESON_EXTRA_BINARIES to allow
per-package modification to the cross-compilation properties.
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr: do a single substitution as in a1e3c7b693]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This provides generic functions for Qt5 qmake based packages. It will
make it possible to remove lots of redefinition of
QT5_xxx_{CONFIGURE|BUILD|INSTALL_STAGING}_CMDS. Additionally it
provides a generic target install method which will make most of the
package specific commands obsolete.
This is done by re-running the install step of the qmake generated
Makefile with the package build directory prepended (to the
staging/host path). Even though this does create lengthy pathes it
allows for easy separation of the staging files from the host destined
files by just omitting the resulting BUILD_DIR+HOST_DIR path from the
following rsync call to the real target folder. The cleanup of many
files we dont want in target is deferred to the target-finalize
step. In addition to what's being removed already, we also have to
cleanup some Qt5 specific files (prl) and the documentation directory.
This approach was chosen over copying all files recorded in the pkg-files-list
after some discussion which Thomas Petazzoni summed up:
"We don't yet use pkg-files-list really as part of the build
process anywhere, I feel a bit more comfortable at this point with what
Andreas is proposing."
Thanks to this infrastructure, it will be possible to get rid of the
many conditional install commands because qmake already takes care of
this when generating the Makefile install targets with the given or
autodetected configure options of each package.
However, custom install steps may have to remain in cases where a
particular Buildroot option has no corresponding setting in the
packages configuration options.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Unlike <PKG>_DEPENDENCIES, <PKG>_PATCH_DEPENDENCIES only guarantees
extract and patch of listed dependencies, not build. Make this subtlety
more explicit in the documentation.
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[yann.morin.1998@free.fr: slight fix]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Package optional or choice config symbols are usually prefixed with the
package config symbol name. Rename BR2_PACKAGE_CURL to
BR2_PACKAGE_LIBCURL_CURL to conform.
Update references to the old name.
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The seperation of the fields in the hash file should be 2 spaces for
consitency
Update the manual accordingly.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr:
- drop the notes part, reword the first hunk
- update the examples
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This list dates back to 2012. Since a long time now Buildroot saves the
patches applied as well as the actual source code for some external
toolchains. Update the manual accordingly.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds a new manual section that captures an overview
of the run-tests tool, how to manually run a test and where to
find the test case script.
A brief set of steps is included to go through how to add a new
test case and suggestions on how to test/debug.
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[yann.morin.1998@free.fr:
- switch the creating and debugging sections
- minor reformatting
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update dependency documentation to detail the order-only relationship
associated with the DEPENDENCIES variable. See the thread at [1] for
details.
[1] http://lists.busybox.net/pipermail/buildroot/2019-October/262685.html
Signed-off-by: Dan Walkes <danwalkes@trellis-logic.com>
[yann.morin.1998@free.fr: indentation & slight rephrasing]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
since v234 upstream recommands using systemctl preset-all to enable units.
* add a buildroot specific preset file
* use that file to disable getty@tty1
* make systemd depend on host-systemd
* remove all link-creating code that systemd does for us.
Most packages will not be affected by this change, but a few packages
were installing units without manually enabling them. Those packages
will now be automatically enabled.
The fact that those packages were not enabled is almost certainly a bug,
but it is a change of behaviour that needs to be reported
host-systemd also builds udevadm for the host. That means we no longer
need to depend on host-eudev to provide udevadm (that would conflict).
Signed-off-by: Jérémy Rosen <jeremy.rosen@smile.fr>
[yann.morin.1998@free.fr:
- also remove the hwdb sources on fs generation
- fix check-package errors
- few typoes and reformatting in commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As suggested by Arnout Vandecappelle, this commit adjusts the
generic-package documentation to document the effect of per-package
directory support on HOST_DIR, STAGING_DIR and TARGET_DIR.
Suggested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: change version reference to Buildroot 2020.02]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update the documentation for the output/host/ directory to mention
that it contains the sysroot for the target toolchain, as well as the
host tools required for running buildroot.
Update the staging/ documentation to reflect that it is a link to the
target toolchain sysroot in the host/ directory.
Signed-off-by: Michael Drake <michael.drake@codethink.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Laurent reported that a short tutorial was missing in the manual to
explain how to reuse a Buildroot toolchain as external toolchain.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Laurent Guillier <laurent.guillier@smile.fr>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas: completely rewrite the thing]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit 6eacea5a (support/kconfig: bump to kconfig from Linux
4.17-rc2), xconfig uses Qt5, so update prerequisite.txt to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, the formatting we impose on the _LICENSE variable requires
that we also use the rarely used := assignment operator, which makes
the _LICENSE variable the only variable that users have to write with
this operator.
This really departs from the simplicity and consistency of using the
append-assignment, which we use for every other variable.
This is because the append-assignment operator surreptiously
introduces a space between the original value and the appended one. But
we can use this knowledge, to match any instance of a space followed by
a comma, and turn it into a single comma.
This allows users to now have a consistent use of the '=' and '+='
operators we use everywhere else in .mk files.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, we only require a gcc 4.4 version, which now is pretty old
(released in April 2009). This requirement is not even tested nowadays,
with our oldest autobuilder having a 4.7 version only.
And even then, 4.7 is still old enough that it prevents us from
upgrading some packages. For example cmake 3.10+ requires C++11
constructs that were only added in gcc 4.8 (when C++11 support was
finally completed in gcc).
So, update our requirements for gcc to at least 4.8.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since <package>-rebuild implies <package>-reinstall and
<package>-reconfigure implies <package>-rebuild, it is confusing
to mention the make and make <package> commands when describing
the restart of the configuration, compilation and installation of
the package.
Therefore remove the ", followed by +make+ or +make <package>+"
portions in the "8.3. Understanding how to rebuild packages" section,
and add a new paragraph clarifying how to include the rebuilt package
in the filesystem image, if that is necessary.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Back in commit 025b863e6f, the option
BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS was introduced, to
separate the option that host packages needing Rust should depend on
(BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS) from the option that target
packages needing Rust should depend on
(BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS).
Since the example in the manual is showing a target package, we must
use BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Sam Voss <sam.voss@gmail.com>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
meson does not allow passing path to helper programs (e.g. pkgconfig)
using variables in the environment. Instead, it insists that those paths
be defined in the cross-compilation.conf file, in the [binaries]
section [0]
As such, allow packages to declare such a list of arbitrary entries to
add in the [binaries] section.
[0] https://github.com/mesonbuild/meson/issues/3327 for the LLVM_CONFIG
example, which we'll address in a follow-up patch.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: McCabe, Robert J <robert.mccabe@rockwellcollins.com>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add an OpenRC service that starts and stops sysv-init scripts. We order
that script 'after local' so that it is started after all other native
openrc services.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
[yann.morin.1998@free.fr:
- don't propagate the micro optimisation for running .sh scripts
- use spaces, not TABs
- stop services in reverse order
- reword commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If follow through the customize-outside-br.txt with how to add external
toolchain in br-ext tree then one thing is missing - inclusion of
*.mk file with external toolchain package description.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Python packages should no longer depend on BR2_PACKAGE_PYTHON in their
config file, unless they are only compatible with Python 2.
Signed-off-by: Raphaël Mélotte <raphael.melotte@essensium.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, the packages are sorted smallest first, and biggest last
(with unknown and others second-to-last and last, resp.).
Add an option to invert the ordering (but keeping unknown and others at
their current positions).
This has the nice side effect that we can now control the colours
assigned to the biggest package(s), as the colours are cycled from the
first to the last. Currently, the biggest packages gets a redish colour,
which is appropriate, but the second gets a greenish one, which is not
as appropriate (but changing that can come later).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When dealing with embedded devices, storage is more often than not some
kind of flash device, on which the memory is usually counted as powers
of 1024 instead of powers of 1000. As such, people may prefer reports
using IEC prefixes [0] instead of the SI prefixes.
Add an option to that effect.
We use argparse's ability to use custom actions [1] [2], to provide a
set of options that act on a boolean, but has a single help entry and
internally ensures consistency of the settings. We could have been using
the more conventional store_true/store_false actions instead, but that
would have meant either two help entries, one for each set of options,
and/or some logic after parse_args() to check the validity of the
settings.
[0] https://en.wikipedia.org/wiki/Binary_prefix
[1] https://docs.python.org/2/library/argparse.html#action
[2] https://docs.python.org/2/library/argparse.html#argparse.Action
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
