genext2fs is built only if the user selected an ext2 root filesystem.
However, some use-cases can't live with the full target/ dir on the
root filesystem, and requires separate partitions (eg. for /usr).
In this case, the user would not select an ext2 root fs in the
Buildrooot menu, and would only generate a tarball of the rootfs.
This tarball would then be used from a post-image script to build
the actual required FSes.
But then, genext2fs is not built, since the ext2 root FS was not
selected.
As for the other filesystem generators, provide a host variant of
genext2fs (genext2fs is already host-package aware, so only needs
adding a Kconfig entry).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump version to get a few new firmware files for some WiFi adapters.
In the rtl81xx familly, it's hard to differentiate each members: I have
a USB stick that identifies itself as TRL8188CUS, but is handled by the
rtl8192ce driver. So I moved all of rtl81xx firmwares under the same
option to avoid confusion.
It will be the responsibility of the user to eventually get rid of
unwanted firmware files in a post-build script, if needed.
Ditto for rtl87xx.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There are a buncha fixes that are not available in a release yet.
Needs refreshing our patches.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The following patch adds support for ecryptfs-utils.
http://ecryptfs.org/
[Peter: needs host-intltool, fix typo in help text]
Signed-off-by: Marcin Bis <marcin@bis.org.pl>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Added support for mysql and sqlite plugins. Configuration is based on qt package.
[Peter: strip trailing spaces]
Signed-off-by: Wojciech Slenska <wojciech.slenska@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This forces bmake to call the wrapper, not itself.
Also, use consistent "${0/*}" instead of "${0/pmake}".
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When qt5 is built with EGLFS support, libQt5OpenGL library should be copied to
target.
Signed-off-by: Wojciech Slenska <wojciech.slenska@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In preparation for the out-of-tree support, it is important that all
packages have the same patch hooks for the host variant and the target
variant (because the source tree will be shared between host and
target variants when doing out-of-tree build).
In the case of gutenprint, the patch hook executed for the target just
creates one directory which is needed for autoreconf to work, and the
host variant is not autoreconf'ed. So there is no harm in also
applying this patch hook to the host variant.
[Peter: autoreconf for host as pointed out by Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In preparation for the out-of-tree support, it is important that all
packages have the same patch hooks for the host variant and the target
variant (because the source tree will be shared between host and
target variants when doing out-of-tree build).
In the case of the xlib_libX11 package, the post-patch hook removes
some flags from the build of the makekeys utility, so that when
xlib_libX11 is built for the target, the build of makekeys for the
host works properly. This modification can be applied to the host
variant of xlib_libX11 without any problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There used to be a post-patch hook to apply a patch only on the host
variant of libgtk2. However, after the reorganization of the patch
naming policy, this was no longer working properly, so
dd1848bc73 changed this by a patch that
works on both the target and host variants.
We can therefore get rid of the useless post-patch hook.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When a Xtensa specific patch needs to be applied, it should be applied
both when doing the target and the host build.
This change is part of the effort to remove the differences between
host and target post-extract and post-patch hooks, that are
problematic for the out-of-tree support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, the gettext source code was being patched differently for
the host and the target build, which is going to be incompatible with
out-of-tree build. The difference is that the gettext tools could be
disabled in the target build, but are always enabled on the host
build.
Therefore, this commit switches the gettext package to using proper
patches against the relevant configure.ac and Makefile.am
files. gettext is now being autoreconfigured. Configuration options
are also passed for the host variant, in order to disable the build of
a large number of things we don't care about.
Finally, the two existing patches are renamed to include a number in
their filename.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
this adds the libopenmax virtual package for hardware based video acceleration
[Peter: fix openmax-without-any-backends check]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
adds webm multimedia support and the VP8 encoder/decoder library.
http://www.webmproject.org/
[Peter: strip trailing spaces, wrap help text]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
I believe the original intent was to make it that the configure step
for the opengl virtual packages fails if there is not at least one
dependency. This patch fixes the logic so that it actually fails if
dependency list is empty
Signed-off-by: Will Wagner <will_wagner@carallon.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes the following compilation problem when building with 'make -s'
Unknown option "-q".
See ./configure --help for available options.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This bug caused udev to fail to load any module, crashing with Illegal
instruction.
The patch was taken from upstream and should be integrated in the next
version of kmod (version 14)
Signed-off-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The v8 Javascript virtual machine that is the core of qt5jsbackend is
only available on certain architectures. At the moment, only ARM, x86,
x86-64 and mipsel are supported.
Fixes:
http://autobuild.buildroot.org/results/a2e/a2e62e2deaa28ec9d4d957523a00ee0b7a634950/build-end.log
[Peter: also add dependency for qt5graphicaleffects]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libtirpc fails to build with the Blackfin external toolchains provided
by Analog Devices, because their uClibc configuration doesn't include
AI_ADDRCONFIG. In order to prevent such build failures to happen, we
simply prevent libtirpc from being selected when such toolchains are
used. This is not a big problem, since they provide native RPC
support.
Also, since they provide native RPC, we don't have to propagate this
new dependency to the reverse dependencies of libtirpc, because they
all use native RPC when available. The exception to this rule is the
rpcbind package, which can only use the libtirpc implementation of
RPCs, and not the native one of C libraries. Therefore, the dependency
is propagated to the rpcbind package.
Fixes:
http://autobuild.buildroot.org/results/58b/58b16449065c16afce11ba120db56839efb2b1ea/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
czmq fails to build with the Blackfin external toolchains provided by
Analog Devices, because their uClibc configuration doesn't include
AI_ADDRCONFIG. In order to prevent such build failures to happen, we
simply prevent the selection of czmq or one of its reverse
dependencies when such toolchains are used.
This fixes:
http://autobuild.buildroot.org/results/821/82140fac4c2a2cef3f38f06cada8f17fd7f0078b/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This upstream version (the latest available at the time of this
writing) contains
http://cgit.freedesktop.org/NetworkManager/NetworkManager/commit/?id=6b64e4db2f3c9cfc0e0e240cf0bc58f3b3e90c1f
which fixes a build issue of network-manager against recent kernel
headers.
We also remove our patch against network-manager, because it has been
merged upstream as commit cbf72aeb34a6f1fd1bcd7f78ae88985154dc85af.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Just like we do for many other GNOME-hosted tarballs, use a
<pkg>_VERSION_MAJOR variable for network-manager.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch adds a new package for the OpenGL, OpenVG and EGL
proprietary implementations specific to the Vivante GPU of i.MX6
processors.
[Peter: show comment on uClibc toolchains, tweak help text]
Signed-off-by: Henk Fijnvandraat <h.fijnvandraat@inter.nl.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit bumps both imx-lib and firmware-imx to version 1.1.0.
Signed-off-by: Henk Fijnvandraat <h.fijnvandraat@inter.nl.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
