Just like we have AUTOMAKE, AUTOCONF or QT_QMAKE, let the scons
package provide a SCONS variable that points to the scons host binary.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix for CVE-2012-2688 (potential overflow in _php_stream_scandir),
CVE-2012-3365 (SQLite open_basedir bypass) and other misc bugfixes.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All the defconfig files used by the autobuilders that use
pre-installed external toolchains are making the assumption that the
default for a custom external toolchain is "pre-installed". We keep
this default for now, since changing it breaks the autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
create mode 100644 package/tar/tar-1.26-no-gets.patch
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
create mode 100644 package/m4/m4-1.4.16-no-gets.patch
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
HOST_CONFIGURE_OPTS allows to pass the correct CC, CXX, CFLAGS,
CXXFLAGS, etc. For example, it allows the elftosb build process to
properly use ccache when available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-By: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds a new config option BR2_PRIMARY_SITE_ONLY that, when set,
restricts package downloads to the specified BR2_PRIMARY_SITE. If the package
is not present on the primary site, the download fails.
This is useful for project developers who want to ensure that the project can
be built even if the upstream tarball locations disappear.
[thomas.petazzoni@free-electrons.com:
Extend config option help message with more details coming from the
commit log. Added a dependency on the fact that a primary site has
been defined. Without any primary site (the default configuration),
this new option does not make any sense.]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cortex-A8 and Cortex-A9 ARM cores are guaranteed to provide a hardware
floating point unit, so there's no reason to default to software
floating point for them.
More importantly, the newest Linaro toolchains are hard float
toolchains, so basically an user choosing those toolchains and leaving
the default option of software float would run in compilation issues.
So let's make hard float the default for Cortex-A8 and Cortex-A9.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check_glibc function verifies that the C library of the external
toolchain is glibc. To do so, it verified that a file matching
ld-linux*.so.* or ld.so.* was found in the lib/ directory of the
toolchain's sysroot. However, with the Linaro 2012.05 toolchain, the
lib/ directory contains two links named ld-linux-armhf.so.3 and
ld-linux.so.3, which means that the first ld-linux*.so.* wildcard
expression expands to two files, which generates a syntax error for
the "test" program. We replace that with a more elaborate find+wc
combination to determine whether at least one matching file is
present.
The check_arm_abi function verifies the ABI of an ARM toolchain. For
EABI, it tested that the target name ends with eabi. However, with
Linaro 2012.05, the tuple is now arm-linux-gnueabihf (for hard float),
so we have to adjust the logic to accept this additional "hf"
specification in the tuple.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Line-up with changes from commit 3367d5ce77
"external-toolchain: run checks even on extracted toolchains"
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds the possibility to download a custom external
toolchain, in addition to the existing support of preinstalled custom
external toolchains.
With the modified configuration, the user is presented with the
following options:
- Toolchain type: Buildroot toolchain | External toolchain | Ct-ng toolchain
In case of External toolchain:
- Toolchain: the CodeSourcery toolchains | Custom toolchain
- Toolchain origin: Toolchain to be downloaded and installed | Pre-installed toolchain
In case of Toolchain to be downloaded, the user is presented with:
- Toolchain URL
In case of Pre-installed toolchain, the users sees:
- Toolchain Path
For CodeSourcery toolchains, the toolchain URL field is not used (the
URLs are directly coded in ext-tool.mk).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When using one of the package infrastructures, the DOWNLOAD function
uses $(PKG)_SITE_METHOD to determine the appropriate download method,
which is autodetected based on the URI if none was explicitly set.
When the DOWNLOAD function is called directly, for example when
downloading a toolchain, or from a package that does not use one of
the package infrastructures, the SITE_METHOD is not autodetected,
and thus the download defaults to wget.
This patch adds URI scheme detection directly to the DOWNLOAD method,
in case no SITE_METHOD was detected yet.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The localfiles download method uses $($(PKG)_SITE))) and
$($(PKG)_SOURCE) instead of $(1) and $(2). This means that it can only
be used for package downloads (through gentargets, autotargets, ...)
and not for other downloads like external toolchains.
This patch changes localfiles to allow this, just as the wget and scp
download methods already did.
For the version control download methods, nothing changes.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix the indentation of the external toolchain Config file, where tabs
and spaces are mixed as indentation even within the same block.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MXS platforms (imx23 and imx28) are relying on bootlets as their first
stage bootloaders, that can then either start a regular second stage
bootloader or directly a Linux kernel. However, the Makefile allows
only to build u-boot and linux images at the same time, which is
not very convenient as we will more likely use only one of them,
so we need to duplicate a bit what is already done so that we are able
to choose what we want to generate.
thomas.petazzoni@free-electrons.com:
* Remove incorrect dependency on BR2_PACKAGE_ELFTOSB
* Each board configuration option is for one board, not multiple
boards, so use singular.
* The i.MX28 support is for i.MX28 EVK only, reflect that in the
option prompt and the option name.
* Use 'generic-package' instead of GENTARGETS
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Elftosb is a Freescale toolset to build binary image files (like U-Boot.sb)
to be used with CPUs imx23, imx28, stp37xx
thomas.petazzoni@free-electrons.com:
* Add -m 0755 when installing binaries
* the _CLEAN_CMDS is not supposed to uninstall things from the
HOST_DIR.
* Use 'host-generic-package' instead of 'GENTARGETS,host'
Signed-off-by: Eric Jarrige <eric.jarrige@armadeus.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
slightly adjust the installation process to just do a loop of calls
to $(INSTALL).]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[thomas.petazzoni@free-electrons.com:
add patch that creates a standard setup.py file. This allows the
.pyc files to be generated at build time, and installed into the
target. This is important because by default, Buildroot removes all
.py files from the target, to keep only the .pyc files. The
python-nfc.mk file was changed to use this setup.py standard build
process.]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Installation of host-lua was failing because it was the first package
to be built, and $(HOST_DIR)/usr/lib didn't exist. Therefore, use
install -D everywhere so that intermediate directories are created as
needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gcc 4.6 has become more sensitive about option ordering, especially
libraries. It requires the -l flags to be placed after the object
files that need that library. See for example
http://nick.zoic.org/art/etc/gcc-linker-libs.html. We had -llua at the
beginning of the link command line, causing build issues (here on gcc
4.6 with host-lua).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit ad6af5819f removed the
HOST_LUA_DEPENDENCIES assignement to the empty variable, so from that
commit, the dependencies of host-lua are automatically computed from
the dependencies of lua. Since lua can depend on readline and ncurses,
it means that host-lua can depend on host-readline and host-ncurses,
and the host-readline package does not exist in Buildroot. Since there
is no reason to build host-lua with readline/ncurses support, just
re-add the HOST_LUA_DEPENDENCIES variable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Francois Perrad <fperrad@gmail.com>
This patch adds the libnfc-llcp package.
This package requires a minium libnfc version of 1.6. A separate patch has
been submitted to bump the libnfc version; that patch should be regarded as
a prerequisite for the present patch.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps the libfreefare package from version 0.3.2 to version 0.3.4.
Version 0.3.4 requires a minium libnfc version of 1.6. A separate patch has
been submitted to bump the libnfc version; that patch should be regarded as
a prerequisite for the present patch.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
bwm-ng can monitor not only network bandwidth but also disk-io
bandwidth, so it is more appropriate to put bwm-ng into System tools.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
