Fix the following build failure raised since commit
69284b6700:
Checking for program 'pkg-config' : not found
The above check failed, but the checkee is required for --alsa.
Indeed, before this commit, host-pkgconf was pulled by libsndfile
dependency
Fixes:
- http://autobuild.buildroot.org/results/cbdc251980f5571f75281202ebffc04ddecbf28d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Disable example tools (enabled by default since bump to version 1.9.20
in commit 26ca7fec04 and
508d95a97e)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Explicitly disable or enable opus and readline which have been added by
commits 055cf58842 and
f658b1934f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the following build failure raised on uclibc and musl since the
addition of libexecinfo package in commit
eea8ba446c:
/home/peko/autobuild/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/10.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: dbus/sigsegv.c.17.o: in function `signal_segv':
sigsegv.c:(.text+0x98): undefined reference to `backtrace'
Fixes:
- http://autobuild.buildroot.org/results/dca49cb9b3e66fac921601560e9358bcce9acffc
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
host-python was listed in jack2 dependencies, but is actually
not needed. Also tested with an experimental python3 based
Waf package infrastructure, so we can exclude that jack2
"accidentally" uses the host-python2 pulled in by Waf.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove celt051 package as celt has been merged into the IETF Opus codec
and is now obsolete (see http://celt-codec.org/).
The only reverse dependency of celt051 is spice. Opus support on spice
has been added upstream 6 years ago with:
ce9b714137
Spice disabled celt by default since version 0.14.1 and:
72b0d603e1
Spice evens error out, by default, if Opus is missing but not explicitly
disabeld since:
f522473842
This will also fix a static build failure on spice with celt051 and opus.
Fixes:
- http://autobuild.buildroot.org/results/96c786f85d35f33508e9c71778043d16b87f72cd
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: slight rephrasing in legacy help]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
On Github, a large number of projects name their tag vXYZ (i.e v3.0,
v0.1, etc.). In some packages we do:
<pkg>_VERSION = v0.3
<pkg>_SITE = $(call github foo,bar,$(<pkg>_VERSION))
And in some other packages we do:
<pkg>_VERSION = 0.3
<pkg>_SITE = $(call github foo,bar,v$(<pkg>_VERSION))
I.e in one case we consider the version to be v0.3, in the other case
we consider 0.3 to be the version.
The problem with v0.3 is that when used in conjunction with
release-monitoring.org, it doesn't work very well, because
release-monitoring.org has the concept of "version prefix" and using
that they drop the "v" prefix for the version.
Therefore, a number of packages in Buildroot have a version that
doesn't match with release-monitoring.org because Buildroot has 'v0.3'
and release-monitoring.org has '0.3'.
Since really the version number of 0.3, is makes sense to update our
packages to drop this 'v'.
This commit only addresses the (common) case of github packages where
the prefix is simply 'v'. Other cases will be handled by separate
commits. Also, there are a few cases that couldn't be handled
mechanically that aren't covered by this commit.
Signed-off-by: Victor Huesca <victor.huesca@bootlin.com>
[Arnout: don't change flatbuffers, json-for-modern-cpp, libpagekite,
python-scapy3k, softether]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Patches downloaded from Github are not stable, so bring them in the
tree.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for LGPLv2.1/LGPLv2.1+ is LGPL-2.1/LGPL-2.1+.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/LGPLv2.1(\+)?/LGPL-2.1\1/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license strings as much as possible.
SPDX short identifier for GPLv2/GPLv2+ is GPL-2.0/GPL-2.0+.
This change is done by using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv2\>/GPL-2.0/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Wojciech M. Zabolotny <wzab01@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In this case in particular it's $(TARGET_CONFIGURE_OPTS), which includes
$(TARGET_MAKE_ENV).
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With gcc version 6, we get the following error when building jack2:
../tests/iodelay.cpp:170:49: error: narrowing conversion of '-1' from 'int' to 'jack_nframes_t {aka unsigned int}' inside { } [-Wnarrowing]
jack_latency_range_t capture_latency = {-1, -1};
^
../tests/iodelay.cpp:170:49: error: narrowing conversion of '-1' from 'int' to 'jack_nframes_t {aka unsigned int}' inside { } [-Wnarrowing]
../tests/iodelay.cpp:171:50: error: narrowing conversion of '-1' from 'int' to 'jack_nframes_t {aka unsigned int}' inside { } [-Wnarrowing]
jack_latency_range_t playback_latency = {-1, -1};
^
../tests/iodelay.cpp:171:50: error: narrowing conversion of '-1' from 'int' to 'jack_nframes_t {aka unsigned int}' inside { } [-Wnarrowing]
This is fixed by grabbing an upstream commit,
ff1ed2c4524095055140370c1008a2d9cccc5645
Fixes:
http://autobuild.buildroot.net/results/8a8/8a8d533a0f785591fee10f1c09c9294f892ef7f7/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The optinal dependency on celt is not added, because we only have
celt-0.5.1 and jack2 requires celt >= 0.5.2 (even though it does look
for celt >= 0.5.0, it does not build with celt- < 0.5.2). Since we
cannot upgrade celt (for now), we just never make jack2 depend on
celt051, and it won't find it either, as it just searches for celt.pc
and we have celt051.pc.
As well, the dependency on eigen is only useful in conjunction with
gtkiostream, for which we do not have a package. So, we don't need to
depend on eigen.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
jack2 allows to use three modes:
- A legacy jackd service alone.
- A DBUS jackd service alone.
- A mixture between the standalone jackd and the DBUS jackd.
This patch adds the possibility to choose between these three modes,
while the legacy jackd was the only option before.
In addition, the jack_control tool is removed when the DBUS jackd is not
available, as this tool is used to control it.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
[yann.morin.1998@free.fr:
- rebase
- only use two booleans, not a choice
- python is a runtime-only dependency
- use python3 if enabled, fallback to python
- simplify post-install condition
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: fix minor typo.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
jack2 installs some headers and libraries that can be used by other
applications, so it makes sense to install it to the staging
directory.
Signed-off-by: Pieter De Gendt <pieter.degendt@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
jack2 uses Waf 1.6.11. The waf configure program combines a part of
python script with a compiled blob. According to Waf documentation,
waf currently supports python interpreter from version 2.3 to 3.1.
However, Buildroot provides python-3.4. So, let's uses host python2
interpreter for building jack2.
This patch also cleanup whitespace, replacing wrongly used spaces with
tabs.
Fixed:
http://autobuild.buildroot.net/results/913/913bb1836076be9f201bf6641c7614708d6916bc/
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: use github download helper, small improvements to Config.in]
Signed-off-by: Wojciech M. Zabolotny <wzab01@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
