The script was changed via modernize utility. The only manual
made part was the handling of StringIO.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When generating a random configuration, also check the host
dependencies for that configuration and error out if it fails.
This is mainly intended for the autobuilders, so they don't try to
build a configuration for which the necessary host packages are not
installed.
Instead of erroring out, we could also generate a different random
config. However:
- When called for the autobuilders, the autobuild-run script will
anyway just attempt another build. The only difference is that a
warning will be printed in this autobuild log now. This warning
is in fact quite useful to hint that the autobuilder could benefit
from intalling this additional host package.
- When called manually, the user may in fact want to install the
missing host package and continue with the saved random config.
Fixes:
http://autobuild.buildroot.net/results/d7c/d7c12e873a71fef1e0b5e19cfad45024050614e1http://autobuild.buildroot.net/results/a0a/a0a105c1ec2d0517112b02932a85831d4b597b9fhttp://autobuild.buildroot.net/results/96c/96cc6cedc64c777e993671204809599a1498472a
and many others...
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix these warnings:
E101 indentation contains mixed spaces and tabs
E128 continuation line under-indented for visual indent
E231 missing whitespace after ','
E261 at least two spaces before inline comment
E302 expected 2 blank lines, found 1
E305 expected 2 blank lines after class or function definition, found 1
W191 indentation contains tabs
Ignore these warnings:
E402 module level import not at top of file
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix these warnings:
E202 whitespace before ']'
E203 whitespace before ':'
E302 expected 2 blank lines, found 1
E305 expected 2 blank lines after class or function definition, found 1
E711 comparison to None should be 'if cond is None:'
E741 ambiguous variable name 'l'
F401 'sys' imported but unused
W391 blank line at end of file
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Ignore these warnings:
F401 'lib.ConsecutiveEmptyLines' imported but unused
And remove comments that are not needed anymore.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Depending on how setup.py reads requirements files empty elements can occur.
This patch takes care, that such elements will be ignored and don't crash
the scanpypi script.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Store the list of detected licence files in the main object and
automatically add their sha256 checksums when creating *.hash file.
Bonus: fix wrong indentation.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use spdx_lookup package to compare packages' license file texts
with SPDX database.
This feature is optional.
Bonus: fix wrong indentation.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of limiting it to the package under test, we run it globally.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When package installation fails it is good to know what happened.
Signed-off-by: Alexey Roslyakov <alexey.roslyakov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Just AUTORECONF = NO is redundant.
Just HOST_AUTORECONF = NO is redundant.
But the combination of AUTORECONF = YES + HOST_AUTORECONF = NO is valid.
So basically for all variables that have inheritance between target and
host, having the host variant of the variable set the variable value
back to its default is correct if the target variable is set.
Instead of increasing complexity of the script to fully detect this
case, ignore the host flag set to its default value as it can be
overriding a non-default value inherited from the equivalent target
flag.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Reported-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation for the addition of comments in the CSV file listing
toolchain configurations, we filter out such lines when reading the
CSV file in utils/test-pkg.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation for the addition of comments in the CSV file listing
toolchain configurations, we filter out such lines when reading the
CSV file in utils/genrandconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Diffconfig is a simple utility for comparing two configuration files.
See usage in the script for more info.
Borrowed from the Linux kernel source code and adapted to Buildroot.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Default prefix is set to `BR2_` but may be overidden by setting
BR2_PREFIX.
Example usage:
Enable `BR2_PACKAGE_GNUPG`:
./utils/config --package --enable GNUPG
Check state of config option `BR2_PACKAGE_GNUPG`:
./utils/config --package --state GNUPG
y
Enable `BR2_PACKAGE_GNUPG`:
./utils/config --package --disable GNUPG
Set `BR2_TARGET_GENERIC_ISSUE` to "Welcome":
./utils/config --set-str TARGET_GENERIC_ISSUE "Welcome"
Copied from the Linux kernel (4.13-rc6) source code and adapted to
Buildroot.
Thanks to Andi Kleen who is the original author of this script.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
[Arnout: merge the two tr invications]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The DEVELOPERS file lists file patterns, but the get-developers script
only supports getting packages and CPU architectures. Some files are
neither of those, e.g. defconfigs, support files, package infras, ...
Add a '-f' option that allows to give a list of files for which to get
the developer(s).
Note that the DEVELOPERS file contains directories as well as files,
and the directories are not expanded into individual files. Therefore,
we have to use f.startswith(devfile) to match a directory. This assumes
that the directory name ends with /, otherwise 'package/python' would
also match 'package/python-foo'. Since we make sure that directories do
end with / in the DEVELOPERS file, and since false positives are not
much of an issue in this case, this isn't a problem.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When testing a package with test-pkg, it may be useful to override the
set of toolchains used. For example:
- to test with toolchains used in your company;
- to test against a subset that is known to be problematic;
- to use only toolchains you already have available locally when you
have no network access.
Add an option to use an alternate CSV file containing the config
fragments of toolchains to try.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It is supposedly more robust than just concatenating.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now we have the toolchain config fragments in the buildroot directory
itself, it is no longer necessary to fetch it from the toolchain URL.
The --toolchains-url option is renamed to --toolchains-csv.
The paths in the toolchains_csv file should be either absolute, or
relative to buildrootdir.
After this change, the script should be called from autobuild-run as:
subprocess.call([os.path.join(srcdir, "utils/genrandconfig"),
"-o", outputdir, "-b", srcdir,
"--toolchains-csv", kwargs['toolchains_csv']],
stdout=devnull, stderr=log)
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now we have the toolchain config fragments in the buildroot directory
itself, it is no longer necessary to fetch it from the toolchain URL.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This has a number of side-effects which must be handled.
The lines in minimal.config may be overridden by the random lines added
by amending the configuration, so is_toolchain_usable() shouldn't take
those into account, or indeed the random lines added. Therefore, make
a copy of the config before appending minimal.config and the random
lines. While we're at it, rename the variable to the more appropriate
toolchainconfig.
minimal.config sets BR2_INIT_NONE=y, but we really also want to test
with BR2_INIT_BUSYBOX=y. Therefore, add a random line to use the
busybox init system. We set its probability rather high. The
probabilities of systemd and eudev are increased since they're now
in the else branch of BR2_INIT_BUSYBOX, which halves the probability
that we even get there.
We now also generate configurations without busybox. Previously,
busybox was almost always selected due to BR2_INIT_BUSYBOX=y. Only if
systemd is selected there was a chance to build without busybox.
We now set BR2_SYSTEM_BIN_SH_NONE=y, the other /bin/sh options are
never tested. However, this is not really something that is relevant
to test in the autobuilders.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When outputdir is 'output' (the default), genrandconfig didn't work
correctly because it expects the configfile in outputdir, while
Buildroot puts it in the buildroot directory.
Fix this by explicitly checking if outputdir == buildrootdir/output.
Because abspath is used for both paths, string comparison works
reliably.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The path to the .config file is calculated in several places - replace
it with a single calculation, and pass configfile as an argument
to is_toolchain_usable and fixup_config. These functions also don't
need outputdir any more.
This makes it easier to fix the case when configfile is not in
outputdir.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The --instance argument is just an artifact of genrandconfig's
history as part of autobuild-run. It is much more logical to pass
the output directory and the buildroot directory as arguments, with
sane defaults.
This also allows us to remove the hack of creating a symlink in the
instance directory if it doesn't exist yet.
Note that the default outputdir 'output' doesn't work yet, because in
that case Buildroot will put the config file in the buildroot directory
instead of the output directory. This will be fixed in a follow-up
patch.
After this change, the script should be called from autobuild-run as:
subprocess.call([os.path.join(srcdir, "utils/genrandconfig"),
"-o", outputdir, "-b", srcdir,
"--toolchains-url", kwargs['toolchains_url']],
stdout=devnull, stderr=log)
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This prepares for passing buildrootdir as an argument.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This prepares for passing outputdir as an argument.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The output of genrandconfig is currently very terse, which is annoying
for debugging the script or generally seeing what is going on. Also the
timing information added by log_write isn't very useful when the script
is used stand-alone.
In the new setup, (verbose) output goes to stdout and error output goes
to stderr. Also the "INFO: generate the configuration" message is
eliminated - it should go in the autobuild-run script.
We also add an explicit message when a toolchain can't be used after
the first defconfig, otherwise autobuild-run will just silently
restart.
Note that, since the output of make is no longer redirected to
/dev/null, we get one more message on stderr that will be recorded in
the autobuilder's log file: KCONFIG_SEED=0xXXXXXXXX.
This approach allows us to optimise the error handling to use
exceptions, where appropriate, which can be caught at the top level and
converted to an error message to stderr. This, in turn, allows us to use
subprocess.check_call, which eliminates a lot of conditions.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The SystemInfo class is instantiated globally and passed down to all
functions, but it is really only used in fixup_config. So instead,
instantiate it there.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
kwargs is a left-over from the use of docopt, it's better to use
argparse's Namespace object directly.
In addition, most functions use just one or two fields of args, so
these can just as well be passed directly as arguments to the function.
Particularly for outputdir it doesn't make sense to reconstruct it all
the time.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Warnings fixed:
E731 do not assign a lambda expression, use a def
-> urlopen_closing is defined with a def. urlopen is not used
elsewhere so inlined.
E302 expected 2 blank lines
E501 line too long
-> long lines due to a long string are NOT split
E701 multiple statements on one line (colon)
E722 do not use bare except'
-> use "except Exception", so KeyInterrupt and SystemExit are still
passed. We never intended to catch those.
E741 ambiguous variable name 'l'
-> variable name is replaced with the much more descriptive
toolchains_csv
E271 multiple spaces after keyword
E231 missing whitespace after ','
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Popen is more complicated and more difficult to understand.
check_output raises an exception if the exit code is non-zero, but
that's probably what we want if ldd can't be executed.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This script will be used by the autobuild-run script to generate the
configuration to test. It is put in the utils directory because it can
also be called directly to allow users to test things.
For now, it is a direct copy of the relevant functions from the
autobuild-run script. The only changes are:
- unneeded import statements are removed;
- code/decode wrappers are limited to decode_byte_list;
- __main__ handling is added.
For now, the only supported arguments are the ones needed for
autobuild-run. Follow-up patches will refactor things and also change
the way the script is called. In this version, it can be called from the
autobuild-run script as:
subprocess.call([os.path.join(srcdir, "utils/genrandconfig"),
"-i", str(kwargs['instance']),
"--toolchains-url", kwargs['toolchains_url']],
stdout=log, stderr=log)
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This minimal configuration is also very useful outside test-pkg. In
addition, it will simplify the config merge in a later patch.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
'if __name__ == "__main__"' idiom typically calls main function that
doesn't take any arguments in most cases. We shouldn't pass any tuple to
it.
I've tested the script with python-idna-2.5 and now it works with this
little change.
Signed-off-by: Alexey Roslyakov <alexey.roslyakov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the stdout and stderr streams are redirected, it is not
immediately obvious when a build failed, even though brmake really exits
with the same error code as make did.
When there is an error, print the exit code after the elapsed time.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we check that the filenames in hash lists do not contain
a slash '/' character, because all we are checking so far are the
downloaded archives, and we explicitly need the filename to not contain
a directory component at all.
However, we're soon to also check the hashes of the license files in
packages sources, and those license files may be at any arbitrary
directory-depth in the packages source tree.
[Peter: Remove reference to files with same basename]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A few typos sneaked into the new utils readme...
Additionally, I formulated the list of use cases a bit differently.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When getdeveloperlib.parse_developers doesn't find anything, the script
tries sys.exit(1) but sys is not imported.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
scancpan's help text refers to its location, so update it after the
move to utils/.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After some discussion, we found out that "tools" has the four first
letters identical to the "toolchain" subfolder, which makes it a bit
unpractical with tab-completion. So, this commit renames "tools" to
"utils", which is more tab-completion-friendly.
This has been discussed with Arnout and Yann.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
