Also include new boot scripts to match standard distro uboot commands.
Our previous 6x_bootscript and 6x_upgrade used custom variables and
their naming don't make sense now that we target more than i.MX6 CPU.
Therefore those old scripts are marked as legacy and kept for now but
the goal is to deprecate and remove them later.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently based upon 4.9.74 stable release.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Here are the main U-Boot modifications:
- Rebase on top of mainline 2017.03 release
- Fix sparse image flashing issues
Here are the main Linux modifications:
- Add mma8451 driver support
- Fix possible TiWi spurious interrupts issue
- Fix Ethernet interrupt parent issue
- Add USB Type C TUSB320 controller support
- Add SOM2 i.MX6DL and i.MX6QP variants
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Here are the main U-Boot modifications:
- Fix second Ethernet port for SoloX
- Fix LCD disable sequence
- Fix LVDS2 as primary display
Here are the main Linux modifications:
- Rebase on top of NXP 4.1.15_2.0.0 branch
- Fix touch screens interrupt conflicts
- Backport tw686x features from mainline
- Fix multiple ft5x06 touch instantiation
- Fix dirty cow vulnerability
- Various improvements to TC358743 driver
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Here are the main U-Boot modifications:
- Add Spansion flash support
- Add secure boot (HAB) support
Here are the main Linux modifications:
- Add HDMI2CSI 75Hz support
- Add KD024FM display support
- Fix PCIe reset gpios in device tree
- Backport xhci fixes from mainline
- Fix SOM PHY address bug
- Enable IPU Prefetch engine for 6QP
- Fix ft5x06 touch bug
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also adding the '-m4' device tree blobs which allow to disable the
peripherals that are used by the Cortex-M4.
The 6x_bootscript is already setup to load the '-m4' dtb if m4enabled
u-boot variable is set to 1.
The FreeRTOS BSP for both Nitrogen6SX and Nitrogen7 can be found here:
https://github.com/boundarydevices/freertos-boundary
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since quite some time, the kernel and bootloader communities consider
zImage as the default format for kernel images on ARM, replacing
uImage. The load address information in uImage is no longer needed,
since the kernel is position-independent in terms of physical address,
except on a few old platforms. For most people, using zImage is simply
better/simpler, so let's switch to zImage as the default image format
on ARM.
All defconfigs are updated: 46 defconfigs no longer need to select
explicitly zImage because it's the default, and 16 defconfigs now need
to explicitly select uImage because that's no longer the default.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Matt Weber <matt@thewebers.ws>
Acked-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It didn't make sense to keep the U-Boot scripts and post build/image
scripts under the nitrogen6x folder since they apply for all our
platforms.
Also update the readme.txt to make it clearer which defconfig should
be used depending on the platform targeted.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This board is using a different kernel and u-boot branch than the
other Boundary Devices platforms since NXP forked the 3.14 kernel to add
i.MX7 support (see imx_3.14.38_6ul7d_beta branch).
Next kernel version, 3.14.52, will be the same for all i.MX platforms.
https://boundarydevices.com/product/nitrogen7/
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
