As stated in commit 555c2585bf, the
Xtensa architecture has been introduced in 2009 and never changed
since its initial introduction. It requires some special handling that
is a bit annoying, and despite our call to the initial developers, and
the announcement of the deprecation of the architecture during the
2012.05, nothing has happened. Therefore, drop support for this
architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: me
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
BR2_SPARC_TYPE is a hidden configuration option that is only used for
the configuration of uClibc, therefore, we move it from
target/Config.arch.in to toolchain/uClibc/Config.in.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
BR2_ARM_TYPE is a hidden configuration option that is only used for
the configuration of uClibc, therefore, we move it from
target/Config.arch.in to toolchain/uClibc/Config.in.
We also add a comment that explains that this stuff is only useful for
uClibc <= 0.9.32. Starting from 0.9.33, uClibc build process simply
uses the compiler flags to find the ARM processor that should be
used. So, someday, we'll be able to remove this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Practically speaking, MIPS has three useful ABIs:
* o32 is for 32-bits CPUs, or 64-bit CPUs running only a 32-bit subset
of the instruction set.
* n32 is for 64-bits CPUs only. It has 32-bits pointers and long
integers.
* n64 is for 64-bits CPUs only. It has 64-bits pointers and long
integers.
See http://www.linux-mips.org/wiki/MIPS_ABI_History and
http://www.linux-mips.org/wiki/WhatsWrongWithO32N32N64 for more
details.
So, this commit reworks the Buildroot MIPS support by:
* Add separate mips64/mips64el top-level architectures.
* Renaming the n32 ABI option to BR2_MIPS_NABI32, for consistency
with BR2_MIPS_OABI32.
* Renaming the n64 ABI option to BR2_MIPS_NABI64, for consistency
with BR2_MIPS_OABI32.
* Make the n32 and n64 ABI selections select the BR2_ARCH_IS_64,
since those ABIs are valid on 64-bits CPUs only.
* Removing the o64 ABI, which is practicaly never used.
* Removing the "none" ABI, which really doesn't make sense.
* Introduce the mips64 and mips64el architecture names when a 64-bits
MIPS ABI is choosen. This will fix build issue like
http://autobuild.buildroot.org/results/9b8c5ea86c953a89e85e7b67e9221de41773f652/build-end.log
where gmp was confused by the fact of having a 32 bits architecture
(detected by the mips- architecture part of the tuple) but 64 bits
integer size when compiling.
* Adjust the uclibc.mk logic to support the new mips64/mips64el
architecture names, and take into account the renaming of the ABI
options.
This has been build tested by generating Buildroot toolchains and
compiling a few packages for MIPS o32, MIPS n32 and MIPS n64.
This work is originally based on prior work done by Gustavo Zacarias.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Can be usefull if a local package provides an init procedure.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of having two separate list of choices for select the target
architecture variant for i386 and x86_64, with many CPU choices
duplicated (because all modern x86 CPUs can be both used as i386 or
x86_64), merge them into a single list. In the x86_64 case, all the
x86 CPUs that do not support the 64 bits instruction set are hidden.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we have now two uncompatible init systems, and we want only one of
them at the same time in use in the rootfs, we need to select a
particular init system. This patch also adds $(PKG)_INSTALL_INIT_SYSTEMD
and $(PKG)_INSTALL_INIT_SYSV hooks that are called when the matching
init systems are selected to install properly the init scripts of the
package.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_mmix and BR2_arm_dunno configuration options do not exist, so
there is no chance for these values to be useful in any way.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Selecting the target subarchitecture variant automatically selects the
appropriated set of features.
[thomas.petazzoni@free-electrons.com:
removed depends on inside hidden options, not needed.
removed SSE41/SSE42 options, not used.]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MIPS EABI is a bare-metal ABI so remove it.
Also fix uClibc to really work with N32 ABI, which used the EABI knob
previously.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Block unsupported processors according to gcc version.
Also remove the comments since we now hide them according to this.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The FLAT (Separate Data) and FLAT Shared ABIs are rarely used, and the
FLAT Shared ABI requires the user to manually assign an unique ID to
each shared library, which we will never support in
Buildroot. Therefore, restrict ourselves to FLAT and FDPIC.
In addition to this, ensure that when FLAT is selected, only static
libraries are produced, because this is what FLAT supports. It will
fix problems such as
http://autobuild.buildroot.org/results/2d756d75162e8737e99df8189bde93ed1a09feef/build-end.log.
Moreover, we make FDPIC the default ABI, since if someone is using
Buildroot, it's most likely to generate a fairly elaborate embedded
Linux system, on which shared libraries are probably useful.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
gcc 4.3/4.4/4.5 accept the following arguments for --with-abi=
"" | 32 | o64 | n32 | 64 | eabi)
So, the "n64" argument coming from buildroot should be changed to "64"
so that gcc's ./configure step does not error out.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Busybox 1.20.0 add functionality to execute scripts from if-post-up.d
and if-pre-down.d, so add the missing directories to the device table to
get them created and avoid unnecessary warnings if not.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add gcc 4.7.0 to the toolchain options.
[Peter: drop 0001-toolchain-gcc-add-4.7.x-series.txt]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: fixup s/big-endian/big endian/ as pointed out by Thomas]
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Tested-by: Stephan Hoffmann <sho@relinux.de>
Tested Microblaze LE on a clean install
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There are a couple of Renesas SH devices with 8 serial ports used.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This allows to easily select the corresponding Atom multilib variant
in the Sourcery CodeBench toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the Sourcery CodeBench IA32/AMD64 toolchain, the proper -march=
switch must be passed. So, on x86_64, we make sure that
BR2_GCC_TARGET_ARCH gets defined to the correct value, just as we do
on x86.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changes:
- Linux kernel requirement: 2.6.34 and above (devtmpfs is mandatory)
(this also applies to the chosen toolchain, because of Kernel headers)
- optional dependency on libusb and usbutils removed
- added dependency on kmod
- added dependency on util-linux for libblkid
- install in /lib/udev instead of /usr/libexec/udev
- udevd moved to /lib/udev
- fixed path to pci.ids and usb.ids
- persistent rules generator is disabled by default, so option
is introduced to enable this option if desired
[Peter: fix build on uClibc, Config.in tweaks]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Xenomai used to have commented out devices to be created in the device
table that the user had to uncomment. Use the new infrastructure to do
just that.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Busybox used to declare and create files even if the package was not
enabled through the device table. Remove the entries for busybox in the
device table and move them to the package declaration.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the ability for buildroot to build an SPE ABI enabled toolchain.
This is mandatory for e500v1/v2 cores since they don't support classic
FPU mode as the e500mc does.
Useful for Freescale's PowerQUICC III and single/dual-core QorIQ
line of processors.
The new TARGET_ABI variable is used rather than TARGET_CFLAGS for
uclibc's UCLIBC_EXTRA_CFLAGS to avoid breakish CFLAGS leaking in, a
good example being -mthumb for ARM.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Fixes by Thomas, including comments from Arnout:
* Use AUTOTARGETS instead of GENTARGETS
* Use $(KERNEL_ARCH) instead of $(BR2_ARCH) as argument to the
prepare-kernel.sh script. This allows the arch name to be fixed
with the usual sed expressions and the quotes to be stripped.
* Add the --verbose option to prepare-kernel.sh. This allows to get
some clear error message when no Xenomai patch has been found for
the current kernel version.
* Improve the help texts as suggested by Arnout, and remove the
now useless README file.
* Add a BR2_PACKAGE_XENOMAI_SMP option, instead of poking inside the
kernel configuration to find out whether SMP is enabled or
not. This cannot work because: 1) the kernel might be built
outside of Buildroot and 2) if the kernel is built inside
Buildroot, it is built *after* Xenomai, so the kernel
configuration file is typically not yet present.
* Simplify the ARM subarchitecture selection as suggested by Arnout.
* Remove the documentation and development files according to
Buildroot standards (using BR2_HAVE_DOCUMENTATION and
BR2_HAVE_DEVFILES).
* Simplify the /etc/ld.so.conf modification logic.
]
[Peter: whitespace fixes]
Signed-off-by: Benoit Mauduit <benoit.mauduit@openwide.fr>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove the BR option and enable the configuration setting in the
uClibc defconfigs.
The BR2_PROGRAM_INVOCATION option only adds very little overhead to
uClibc, and we have a number of packages needing it, so simply always
enable it - Simplifying the kconfig logic and the number of choices
users have to make.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As discussed here:
http://lists.busybox.net/pipermail/buildroot/2011-May/043251.html
Add BR2_ROOTFS_STATIC_DEVICE_TABLE for the extra device table file(s)
to create device nodes in /dev, rather than complicated logic in
BR2_ROOTFS_DEVICE_TABLE, making it complicated to move between static
and dynamic modes.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
sh2eb and sh2a_nofpueb gnuconfig targets are no longer supported
in Buildroot. This patch replaces these Buildroot targets with sh2
and sh2a respectively, and adds sh4a targets as these are widely
used.
To build for devices without an fpu, the relevant toolchain flags
will have to be specified.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The i586 was introduced almost 20 years ago, and some software
(NPTL, libstdc++, ..) doesn't work nicely with i386 anymore, so
it is time to move on.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of the current mix between system config and filesystem menus.
At the same time rename 'Target filesystem options' menu to
'Filesystem images' as it now only contains options about image formats.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The special marker in etc/inittab might not be present with a custom
skeleton. At the same time make the option always active, remove the
hardcoded tty1/tty2 gettys and reword the option description slightly.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This allows to have a device table for all directories/files and
another device table for the device files themselves. Both are needed
for static /dev, but only the first one is needed when
devtmpfs/mdev/udev are used.
We take this opportunity to move the documentation of the device table
format in a common location, package/makedevs/README.
[Peter: simplify code slightly, fix indentation]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: don't allow MMU on bfin]
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add ttyAM support for the ARM AMBA serial ports on the Cirrus EP93xx.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It's really not very useful, all it does is install a target
strace and ldd in a target_utils directory in staging.
While at it clean up the strace makefile a bit.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
BR2_TARGET_GENERIC_GETTY_PORT has now a string type instead of choice.
This makes port configuration flexible and compact.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This default configuration did not even build a kernel image, which is
the main point of having board default configuration. So remove it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
