This tests valdates that we can publish a message and read it back.
Signed-off-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr:
- don't manually start mosquitto, there's a startup script for that
- don't pass custom timeout
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit bf0d8c9659)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes flake8 errors:
support/scripts/pkg-stats:1013:133: E501 line too long (164 > 132 characters)
support/scripts/pkg-stats:1018:36: F541 f-string is missing placeholders
support/scripts/pkg-stats:1110:199: E261 at least two spaces before inline comment
For the first and the last one, we chose to split the long lines rather
than adding noqa: 501. Indeed, the long lines make it very unreadable,
and there are relatively natural places where the line can be broken.
Also split a line just below the second one in a similar way.
The f-string on 1018 doesn't need to be an f-string.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This is done either by switching to single quoted f-strings, triple
double quoted f-strings when needed, or simply single-quoted strings.
The renderer HTML is exactly identical before/after this commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-By: Sen Hastings <sen@phobosdpl.com>
Acked-By: Sen Hastings <sen@phobosdpl.com>
Within single-quoted f-strings, and within triple double quoted
strings, escaping all the double quotes is completely useless and
makes the code more difficult to read. Get rid of all this useless
escaping.
The renderer HTML is exactly identical before/after this commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-By: Sen Hastings <sen@phobosdpl.com>
Acked-By: Sen Hastings <sen@phobosdpl.com>
The python installer package isn't able to overwrite files of packges
that already exist, this causes problems when doing a rebuild or
update without a full clean.
To fix this we can use functionality from importlib to identify and
remove any conflicting python package files before installation.
We also need to use internals from python-installer, as we want to use
the same logic as pyinstaller uses internally for getting the scheme so
that we ensure we clean the correct package scheme (we want it to be the
same as the one we're installing)
Fixes:
Traceback (most recent call last):
File "/home/buildroot/buildroot/support/scripts/pyinstaller.py", line 69, in <module>
main()
File "/home/buildroot/buildroot/support/scripts/pyinstaller.py", line 61, in main
install(
File "/home/buildroot/buildroot/output/host/lib/python3.10/site-packages/installer/_core.py", line 109, in install
record = destination.write_file(
File "/home/buildroot/buildroot/output/host/lib/python3.10/site-packages/installer/destinations.py", line 207, in write_file
return self.write_to_fs(scheme, path_, stream, is_executable)
File "/home/buildroot/buildroot/output/host/lib/python3.10/site-packages/installer/destinations.py", line 167, in write_to_fs
raise FileExistsError(message)
FileExistsError: File already exists: /home/buildroot/buildroot/output/target/usr/lib/python3.10/site-packages/tinycss2/__init__.py
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Tested-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
[yann.morin.1998@free.fr:
- extend commit log about the use of the installer internals (the
symbols prefixed with '_')
- check path.files against explicitly None
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The python installer cli isn't able to overwrite files of packages
that already exist, this causes problems when doing a rebuild or
update without a full clean.
Since we need to add functionality to our pyinstaller.py script to fix
this issue we must also use pyinstaller.py for host python packages.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Tested-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 7652817c93 updated the
documentation but forgot to update support/dependencies
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
It includes a simple test for the full cpio image, and a test of the
dracut image. To validate that the dracut image is a subset of the full
image, 'pv' is added to the image, and the test verifies that pv is not
part of the image. Note that the real rootfs is not mounted at the
moment, so pv is never available in the running image.
Systemd and other init systems are currently untested.
Signed-off-by: Thierry Bultel <thierry.bultel@linatsea.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The CPIO filesystem generated by the test_python_s3transfer test is
too large, and doesn't fit as an initramfs in the 256MB of RAM
available in the versatilepb machine. This causes a "Initramfs
unpacking failed: write error" when booting, and many files being
missing from the root filesystem, ultimately causing the test to fail.
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884635126
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop superfluous# BR2_TARGET_ROOTFS_TAR is not set
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The CPIO filesystem generated by the test_python_botocore test is too
large, and doesn't fit as an initramfs in the 256MB of RAM available
in the versatilepb machine. This causes a "Initramfs unpacking failed:
write error" when booting, and many files being missing from the root
filesystem, ultimately causing the test to fail.
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884635042
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop superfluous# BR2_TARGET_ROOTFS_TAR is not set
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The CPIO filesystem generated by the test_python_boto3 test is too
large, and doesn't fit as an initramfs in the 256MB of RAM available
in the versatilepb machine. This causes a "Initramfs unpacking failed:
write error" when booting, and many files being missing from the root
filesystem, ultimately causing the test to fail.
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884635041
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop superfluous# BR2_TARGET_ROOTFS_TAR is not set
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In commit
9267b0f14d ("package/f2fs-tools: bump to
version 1.15.0"), f2fs-tools was bumped from 1.14.0 to 1.15.0.
It turns out that this version bump causes the output of dump.f2fs to
slightly change.
In version 1.14.0, it looked like this:
Info: Segments per section = 1
Info: Sections per zone = 1
Info: sector size = 512
Info: total sectors = 262144 (128 MB)
Info: MKFS version
"Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 2022"
Info: FSCK version
from "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
to "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
Info: superblock features = 0 :
Info: superblock encrypt level = 0, salt = 00000000000000000000000000000000
Info: total FS sectors = 262144 (128 MB)
Info: CKPT version = 70c101c3
Info: checkpoint state = 181 : trimmed nat_bits unmount
In version 1.15.0, it looked like this:
Info: MKFS version
"Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 2022"
Info: FSCK version
from "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
to "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
Info: superblock features = 0 :
Info: superblock encrypt level = 0, salt = 00000000000000000000000000000000
Info: Segments per section = 1
Info: Sections per zone = 1
Info: total FS sectors = 262144 (128 MB)
Info: CKPT version = b89f8bb
Info: checkpoint state = 181 : trimmed nat_bits unmount
You will notice that the message "Info: total sectors = 262144 (128
MB)" is no longer present, and only "Info: total FS sectors =
262144 (128 MB)" is not present.
Except our test case was precisely looking for this "Info: total
sectors" string in the output, causing the test to fail.
We fix this by simply matching on "Info: total FS sectors" now.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884634814
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Octave package test can occasionally fail due to timeout while testing
some octave modules. This commit slightly increase the timeout value
to reduce those failures.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit makes sure that the python-crossbar package pulls in the
right dependencies, based on the requirements-min.txt.
It does so by:
- Changing the 0002-Remove-idna-requirement patch by a more thorough
patch that drops all indirect dependencies from
requirements-min.txt, making it easier to have a 1:1 mapping
between lines in requirements-min.txt and Buildroot selects.
- Changing the
0003-crossbar-webservice-wap-use-markupsafe-instead-of-we patch to
update requirements-min.txt to indicate the new MarkupSafe
dependency. Here again, to have a 1:1 mapping between lines in
requirements-min.txt and Buildroot selects.
- Updating the Buildroot selects to match requirements-min.txt, with
relevant comments when it does not.
- Fixing up the Crossbar test case to no longer force autobahn to use
umsgpack. Instead, we now use the default of msgpack that is
expected by autobahn.
Fixes bug #14556, https://bugs.busybox.net/show_bug.cgi?id=14556.
Signed-off-by: Emile Cormier <emile.cormier.jr@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
python-scipy is moving to a meson build infrastructure, and requires
fortran cross-compilation. This commit extends the cross-compilation
configuration file generated for use by meson to add the "fortran",
"fortran_args" and "fortran_link_args" properties.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
construct is a Python library for declarative serialization/
deserialization of structured binary data.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Test the scipy::io module, to demonstrate that runtime dependencies
are correct.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Importing the scipy module in the Python interpreter running in Qemu
takes quite a while on slow machine, so a timeout extension to 30
seconds is needed to make sure the test has the time to run.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds an optional linebreak at the vendor attribute in the CPE ID.
It should be noted this is purely for formatting/layout purposes
and does not actually insert any additional characters
(newline or otherwise) into the rendered text.
This means that even though the text renders across two lines,
copy-pasting will still yield one line of text.
example: https://sen-h.github.io/pkg-stats/c245575.html
see also: https://developer.mozilla.org/en-US/docs/Web/HTML/Element/wbr
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Change the test into a characterization test for all warnings and errors
get-developers can return when parsing the DEVELOPERS files.
It will be helpful when changing the behavior of get-developers to bail
out on all syntax checking warnings.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test relies on the OLA Dummy plugin presenting a test device
and port. It starts the daemon, performs few configuration commands,
covers the Python bindings and also test the OLA web interface.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Arnout:
- Indent hash file with two spaces.
- Bump to 1.7.3 to fix build failure with recent GCC.
- Get from github instead of PyPI.
- Add host-meson and host-python-pythran dependencies.
- Properly propagate Config.in dependencies.
- Correct usage of BR2_INSTALL_LIBSTDCPP symbol.
- Remove F77, no longer used.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Guillaume:
- -lnpymath: npymath.ini localization problem
- -lnpyrandom resolution problem
- fix legal-info for latest version LICENSE.txt
- zlib is a scipy::io module runtime requirement
- update serie for scipy 1.8.1 (latest)
]
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
[Thomas:
- add runtime test
- drop dependency on OpenBLAS, which is not needed in a minimal
configuration
- remove PYTHON_SCIPY_NPY_PKG_CONFIG_PATH logic as it is no longer
needed
]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This attempts to re-implement the "sortable_hint" feature without
relying on words. The column headers and CVE expand/contract buttons
change color and cursor style on hover.
If Javascript is enabled:
Just like [PATCH 1/3] more rules are applied to the
generated stylesheet before content is loaded.
If Javascript is disabled:
The headers stay pearly white. :-)
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Sometimes a package can have a lot of CVEs.
Rather than have the CVE cell make a really tall row
(that means you have to scroll a bunch) this collapses the CVE
cell to a fixed size scrollable element with a
sticky button that lets you expand and collapse it.
If Javascript is enabled:
A stylesheet is generated and appended before content rendering,
amending the cells style to have a fixed height and overflow.
Also, the expand/contract button is unhidden.
This means the CVE cells are rendered in a collapsed state
instead of being rendered in an expanded state and then
slamming shut.
This avoids a "flash" and *helps* (vertically at least) manage CLS
(cumulative layout shift).
see: https://web.dev/cls/
If Javascript is disabled:
The cells stay fully open and the expand/contract button stays hidden.
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit c4e6d5c8be (core: implement per-package SDK and target)
introduced leading TABs in that otherwise-space-indented script.
Convert all to spaces, for homogeneity
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Back many years ago, we developed an Eclipse plugin that simplified
the usage of Buildroot toolchains. Enabling the BR2_ECLIPSE_REGISTER=y
was registering the Buildroot toolchain into a special file in your
HOME folder that the Eclipse plugin would recognize to allow to
directly use the Buildroot cross-compiler.
This Eclipse plugin has not been maintained for years. The last commit
in the repository dates back from September 2017. Since then Eclipse
has moved on, and the plugin is no longer compatible with current
versions of Eclipse.
Also, Eclipse is probably no longer that widely used in the embedded
Linux space, as other more modern IDEs have become more popular.
All in all, it's time to say good bye to this Eclipse integration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a simple test importing pyalsa, showing alsa library version and
attempting to list cards.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It's time to finally switch over globally to the new spacing format
that we have agreed on for the hash file, with 2 spaces as a separator
between fields.
This commit was mechanically generated using:
find . -type f -name '*.hash' | xargs sed -i 's%^md5[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%md5 \1 \2%'
find . -type f -name '*.hash' | xargs sed -i 's%^sha1[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%sha1 \1 \2%'
find . -type f -name '*.hash' | xargs sed -i 's%^sha256[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%sha256 \1 \2%'
find . -type f -name '*.hash' | xargs sed -i 's%^sha512[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%sha512 \1 \2%'
This commit can easily be backported on the LTS branch by re-running
the same commands, if needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 2e399893b4)
[Peter: drop Makefile change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sortGrid() has been rewritten to dynamically generate stylesheets with
explicit grid-row properties to re-order the rows, instead of removing
and reinserting the cells.
Performance *should* now be comperable to sorttable.js.
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Like all good problems, disparate pieces work together to create
a "synergistically" hairy mess.
The sortGrid() overhaul highlighted a flaw in pkg-stats allowing
for duplicate package class names across rows.
As an example,
boot/barebox/barebox.mk and boot/barebox/barebox/barebox.mk
both get the classname ._barebox and so sortGrid() sticks them on
the same line giving a table with a vestigal row sticking out
of the right side like some kind of appendage.
Also I neglected to add a "_" to the current version column's cells
pkgname class so instead of "._pkgname" we had ".pkgname" and so
the cells were not collected properly as part of the row.
These issues explain the formatting weirdness.
package classnames are now ".path_to_package_makefile" without suffix
(.mk) (so ._boot_barebox_barebox and ._boot_barebox_barebox_barebox
instead of ._barebox) in order to guarantee uniqueness.
and what was *accidentally*
class="centered current_version data .barebox" is now
class="centered current_version data ._boot_barebox_barebox"
just like *all* the other cells in the row. :p
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add four new tests for systemd (rw and ro in each case):
- use dbus-broker instead of the original dbus
- use the original dbus, with dbus-broker installed
The first two extend the existing IfUpDown test cases by just enabling
dbus-broker; the second ones extend this further, by explicitly enabling
the original dbus.
For one of the tests, we overload the test_run() function to test that
the dbus-broker daemon is indeed running as root. We need not replicate
that check in the other dbus-broker-only test, and it does not make
sense to test that in tests that have the original dbus enabled.
Presence of the original dbus and dbus-broker on the same system is
valid: the original dbus is used as the default system bus daemon. We do
not test switching between the two at runtime, though as this is really
too corner-case specific. We just test to ensure the original dbus
system bus daemon is not impacted by the presence of dbus-broker.
Note: the 'full' test-case enables all systemd options, and some of them
do pull the original dbus package, so we can't use that to test the
integration of dbus-broker; instead, we extend the ifupdown case, which
does not enable the original dbus.
The default external toolchain for cortex-A9 is the old ARM toolchain
which has kernel headers 4.10 Since dbus-broker needs toolchain headers
>= 4.17, it can't be selected with this toolchain. Switch the systemd
tests to the Bootlin toolchains instead. We switch all of them to make
things easier. Note that we will need to take care in the future that
the headers version used in the bootlin toolchain doesn't get bigger
than the kernel that is used. The kernel is currently 5.10, the headers
in the bleeding edge bootlin toolchain are 5.4.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The 'rtl8723ds' name, when queried from release-monitoring.org at
https://release-monitoring.org/api/projects/?pattern=rtl8723ds returns
one project, with one "stable_versions" array, which is empty. This
was not expected by the pkg-stats code, causing an exception:
Task exception was never retrieved
future: <Task finished name='Task-764' coro=<check_package_latest_version_get() done, defined at /home/thomas/projets/buildroot/./support/scripts/pkg-stats:558> exception=IndexError('list index out of range')>
Traceback (most recent call last):
File "/home/thomas/projets/buildroot/./support/scripts/pkg-stats", line 566, in check_package_latest_version_get
if await check_package_get_latest_version_by_guess(session, pkg):
File "/home/thomas/projets/buildroot/./support/scripts/pkg-stats", line 544, in check_package_get_latest_version_by_guess
projects[0]['stable_versions'][0],
IndexError: list index out of range
This commit therefore improves the checks done on the results received
from release-monitoring.org to avoid this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pretty straightforward. Adds my name to copyright notice.
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
CSS classes are generated for each package name for sorting purposes,
However some package names start with a number and this is not allowed.
(see https://www.w3.org/TR/CSS2/syndata.html#value-def-identifier)
Fix is to prepend a character to every class name such as "_".
so every ".package" is now "._package".
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This fixes the .version-needs-update class being overridden by .correct class.
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Somewhere between binutils 2.35 and 2.37, some functionality was
added in readelf to parse more DWARF information. Unfortunately, as
reported in binutils bug
28981 ("https://sourceware.org/bugzilla/show_bug.cgi?id=28981"), this
feature causes a number of fairly scary warnings to be displayed when
running readelf on binaries built with Clang, such as the pre-built
rustc and rustdoc binaries part of the host-rust-bin package. It
looks like this:
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x23
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Bogus end-of-siblings marker detected at offset 2f in .debug_info section
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Bogus end-of-siblings marker detected at offset 10b in .debug_info section
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Bogus end-of-siblings marker detected at offset 10c in .debug_info section
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Further warnings about bogus end-of-sibling markers suppressed
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x23
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x23
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x23
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x23
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: Unrecognized form: 0x22
readelf: /home/thomas/projets/buildroot/output/host/bin/rustc: Warning: DIE at offset 0x1da refers to abbreviation number 5827 which does not exist
These warnings are caused by the readelf calls done by the
support/scripts/check-host-rpath script. The annoying thing is that
once host-rust-bin has been installed in $(HOST_DIR), this warning
appears after the installation of every single host package, because
support/scripts/check-host-rpath rescans all binaries every time.
To avoid showing those scary warnings, this commit sends the error
output of readelf to /dev/null.
Of course, it would be nicer to only filter out those warnings, but
filtering the error output without merging the error output into the
standard output is tricky, so let's keep things simple. If there is
really an error, readelf will abort.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since systemd requires a relatively new kernel, we switched to a
self-built 4.19.204 kernel. However, since then, the downloaded kernel
used by the tests has been updated to 5.10, which is certainly recent
enough to support systemd. Switch to this one. This reduces the test
time significantly.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The --testcases option of run-tests says how many test cases to build in
parallel. It automatically derives a jlevel from it by dividing the
number of cores + 1 by the number of parallel testcases. However, this
will typically result in a fractional number. Make doesn't like
fractional numbers as argument to -j.
Convert the number to integer (rounding down).
* br2_jlevel is an int, as multiprocessing.cpu_count() is an int, so it
will be always >=2 (cpu_count() raises an error if it can't determine
the number of CPU, so it will always return at least 1);
* args.testcases is an int, and is checked to be >=1
So br2_jlevel + args.testcases is guaranteed to always be bigger
than or equal to args.testcases, and the division thus bigger than 1.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr:
- ensure division provide at least 1
- drop the test below
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The first three lines of all systemd runtime tests are identical, and
they already call into a common function. Therefore, move those lines
into the common function as well.
We need to pass an additional argument for the rootfs type. This changes
the signature, which could create confustion with
InitSystemBase.check_init() that has a different signature. Therefore,
rename the function to check_systemd(). That also allows us to call
self.check_init() directly instead of going through super().
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As for the Buildroot testsuite, multiply every emulator timeout by 10
to avoid sporadic failures in elastic runners.
qemu_arm_vexpress_tz_defconfig tested locally with sucess.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/1970084046
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, glibc depends on !BR2_STATIC_LIBS in all the toolchain
variants.
However, for some architectures, glibc is the only supported libc. In
commit 3b3105328e ("Config.in: only
allow BR2_STATIC_LIBS on supported libc/arch"), we implemented a fix
to avoid configurations were BR2_STATIC_LIBS=y with an architecture
already supported by glibc, because these configurations are
impossible. This commit 3b3105328e
prevents from selecting BR2_STATIC_LIBS=y when the C library used for
the internal toolchain backend is glibc.
However, it introduces a discrepency between how this topic is handled
for internal and external toolchains:
- For internal toolchains, we prevent BR2_STATIC_LIBS=y if glibc is
chosen.
- For external toolchains, we allow BR2_STATIC_LIBS=y in all cases,
and it's each glibc toolchain that has !BR2_STATIC_LIBS
This commit addresses this discrepency by preventing BR2_STATIC_LIBS=y
if glibc is chosen in all cases.
Thanks to this, we can remove the !BR2_STATIC_LIBS dependency on both
the glibc package, and all glibc external toolchains.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=14256
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: update to master, fix the gen-bootlin-toolchains script, add
a comment in the static/shared choice to indicate that static is
supported only with uclibc or musl]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
cmp from diffutils is part of the host system requirements, so check
for it. It is used in package/pkg-generic.mk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit is based on earlier work from Łukasz Stelmach
<l.stelmach@samsung.com> to add support for different page sizes on
ARM64.
In his initial submission, Łukasz took an approach similar to this
one, i.e make it ARM64-specific. Following the feedback on the mailing
list, his second version [1] tried to generalize the logic to
configure the page size between architectures. But the general
consensus during the review process was that there wasn't much to
generalize in the end.
So, this new iteration is back to a simpler approach:
* We have new options in Config.in.arm to configure the page
size. Only 4 KB and 64 KB are supported, because our testing in
Qemu and real hardware has not allowed to get a successful setup
for 16 KB pages. We can always re-add support for 16 KB later if
that is resolved.
* The logic to define the ARCH_TOOLCHAIN_WRAPPER_OPTS options is
moved from the ARC-specific file to arch/arch.mk, and extended to
cover ARM64.
* The appropriate logic in uclibc.mk and linux.mk is added to tweak
the relevant configuration options.
* A test case is added in the runtime test infrastructure to test
building and booting under Qemu a 64 KB configuration, with all 3 C
libraries.
For the regular configuration of 4 KB pages, this commit makes one
functional change: on ARM64, -Wl,-z,max-page-size=4096 is now passed in
the compiler flags of the wrapper.
[1] https://patchwork.ozlabs.org/project/buildroot/list/?series=275452
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When compiling Qt6 applications for the target, CMake needs to have
two variables defined to find the host installation of Qt. These two
variables are unconditionally defined, regardless of whether Qt6 is
enabled in the configuration or not, as they do no harm when Qt6 is
not present/used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: José Pekkarinen <jose.pekkarinen@unikie.com>
[Thomas: add test case, add missing dependencies]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When we use the statistics output to generate a CVE/CPE customer
report showing whether a product is affected by CVEs, we are primarily
interested in whether they are relevant to the target
system. Currently we cannot see if the package is configured for the
build (infra==host) and/or the target system (infra==target).
Therefore this commit extends the pkg-stats script to leverage the
information available in "make show-info" output to tweak the list of
package infrastructures for each package. Thanks to this commit, the
script now has a more consistent behavior:
* When pkg-stats is run without -c, i.e without a defined Buildroot
configuration, it continues to operate as it did, i.e it lists all
package infrastructures supported by the package (such as autotools
host+target, or kconfig target, etc.)
* When pkg-stats is run with -c, i.e with a defined Buildroot
configuration which defines the list of packages that should be
considered, then for each package it now lists only the package
infrastructures used by the package in that current
configuration. For example if you have a package with a host and
target variant, but only the host variant is used in your
configuration, now the pkg-stats output will only say that the host
variant of this package is used;
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[Thomas: pretty much rework the entire implementation and how the
result is presented.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It's been ages (5 years at the next release) that we've not installed
host packages in $(HOST_DIR)/usr, but we still have a few packages that
reference it or install things in there.
Drop all of those in one fell swoop.
The run-time test still succeeds, and the following defconfig, which
should exercise all touched packages [*], does build:
BR2_x86_i686=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_INIT_NONE=y
BR2_SYSTEM_BIN_SH_NONE=y
# BR2_PACKAGE_BUSYBOX is not set
BR2_PACKAGE_GAWK=y
BR2_PACKAGE_GETTEXT=y
BR2_PACKAGE_ABOOTIMG=y
BR2_PACKAGE_DBUS_PYTHON=y
BR2_PACKAGE_OLA=y
BR2_PACKAGE_JIMTCL=y
BR2_PACKAGE_LUA=y
# BR2_PACKAGE_LUA_32BITS is not set
BR2_PACKAGE_ARGPARSE=y
BR2_PACKAGE_PERL=y
BR2_PACKAGE_PHP=y
BR2_PACKAGE_PHP_APCU=y
BR2_PACKAGE_PHP_LUA=y
BR2_PACKAGE_PHP_PAM=y
BR2_PACKAGE_PHP_PECL_DBUS=y
BR2_PACKAGE_PYTHON3=y
BR2_PACKAGE_PYTHON_CRYPTOGRAPHY=y
BR2_PACKAGE_PYTHON_PLY=y
BR2_PACKAGE_PYTHON_PYBIND=y
BR2_PACKAGE_LIBVA=y
BR2_PACKAGE_BIND=y
BR2_PACKAGE_BIND_SERVER=y
BR2_PACKAGE_BIND_TOOLS=y
BR2_PACKAGE_APPARMOR=y
BR2_PACKAGE_APPARMOR_BINUTILS=y
BR2_PACKAGE_APPARMOR_UTILS=y
BR2_PACKAGE_APPARMOR_UTILS_EXTRA=y
BR2_PACKAGE_APPARMOR_PROFILES=y
BR2_PACKAGE_REFPOLICY=y
BR2_PACKAGE_URANDOM_SCRIPTS=y
BR2_PACKAGE_BASH=y
# embiggen-disk to exercise go
BR2_PACKAGE_EMBIGGEN_DISK=y
BR2_TARGET_GRUB2=y
BR2_TARGET_GRUB2_I386_PC=y
BR2_TARGET_GRUB2_I386_EFI=y
[*] exceptions:
- zfs was not tested: it needs a kernel to be built;
- compiler-rt was not tsted: it needs llvm to be built, that takes
ages, and other packages already reference the correct location for
llvm-config, so it was assumed that is OK.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Cc: Anisse Astier <anisse@astier.eu>
Cc: Antoine Tenart <atenart@kernel.org>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Christian Stewart <christian@paral.in>
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Cc: Francois Perrad <francois.perrad@gadz.org>
Cc: Guillaume William Brs <guillaume.bressaix@gmail.com>
Cc: Hervé Codina <herve.codina@bootlin.com>
Cc: James Hilliard <james.hilliard1@gmail.com>
Cc: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Cc: Julien Boibessot <julien.boibessot@armadeus.com>
Cc: Julien Olivain <ju.o@free.fr>
Cc: Matt Weber <matthew.weber@collins.com>
Cc: Nicolas Carrier <nicolas.carrier@orolia.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Vadim Kochan <vadim4j@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
---
Changes v1 -> v2:
- fix new instance that have crept in (Romain)
Commit f1bcb2a45c introduced a number of
flake8 errors. Fix these by:
- adding noqa to the multi-line string containing tabs;
- replacing other tabs with spaces;
- removing space after opening parenthesis;
- splitting the long lines.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit adds four test cases for Grub:
- Grub i386 legacy BIOS
- Grub i386 UEFI
- Grub x86-64 UEFI
- Grub AArch64 UEFI
There is some overlap with the ISO9660 filesystem test cases, some of
which use Grub, but we found it relevant to have separate test cases
for Grub, which were useful to test Grub in non-ISO9660 situations.
The Grub ARM UEFI case is not tested, as it requires Grub to be
chain-loaded by U-Boot. Implementing this test case is left as an
exercise for the reader.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- use EDK2 to build the OVMF blurbs from source, instead of the
binary blobs
- add host-dosfstools
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This migrates pkg-stats.html from html tables to CSS grid, allowing
the use of newer, simpler javascript that is short enough to be
inlined, instead of relying on externally hosted javascript.
Javascript sorting function was rewritten from scratch in ~55 lines,
short enough to be inlined directly in the html.
Tables were redone in CSS grid, but with care taken to mimic existing
"look and feel" of prevous implementation, albeit with slightly
better responsive behavior and default styling characteristics.
Column labels are now "sticky" and stay stuck to the top of the
viewport as you scroll down the page.
Also, css was rewritten in fewer lines and table elements were changed
to divs (for grid support).
Other small misc fixes include quoted hrefs and document language
declarations to make the w3c html validator happy.
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Previously, we used support/scripts/pycompile.py to generate the pyc
files for the python libraries.
While the script worked, it did not follow the PEP 3147 layout
requirements for py+pyc deployments.
Now, use the package's own compileall.py script. This will follow
PEP 3147 guidelines. It also supports "legacy" pyc only deployments as
described here:
https://peps.python.org/pep-3147/#case-4-legacy-pyc-files-and-source-less-imports
With this change, we no longer need to hack support for side-by-side pyc
files because files will be deployed as appropriate.
This also has the added benefit of not requiring python3 on the host to
build host-python3.
Fixes: #14911
Signed-off-by: Vincent Fazio <vfazio@xes-inc.com>
[yann.morin.1998@free.fr:
- build-tested in a python-less environment
- build+run-tested with the runtime-test infra
]
Tested-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Our current python3 builds only tests the pyc-only case, so add two new
tests, one for py-only and one for py+pyc. For orthogonality, rename the
current test.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that we only have python3, we will never have to test a
python2-based build, so we can drop python2 compatibility
cruft.
In python3, print already is a function, we don't need to
import it from the future.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a runtime test in order to detect undesired changes in behavior of
the get-developers script.
The test uses a .patch file generated against the buildroot tree as a
fixture to check how get-developers operates when called to check it.
The test also overrides the DEVELOPERS file in order to be fully
reproducible and a -d option is added to get-developers in order to
allow this. Since get-developers only looks to already committed
files to compare against patch files, the fixture uses a package that
is very unlikely to be removed from buildroot tree: binutils.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Thomas: extracted from a larger patch from Ricardo, submitted at
https://patchwork.ozlabs.org/project/buildroot/patch/20220528014832.289907-1-ricardo.martincoski@gmail.com/]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that we have a working mechanism to validate the DEVELOPERS file
with the get-developers -v option, let's use it.
This brings back proper validation of the DEVELOPERS file, as
get-developers without argument no longer did any validation following
commit 45aabcddc5 utils/get-developers: really make it callable from
elsewhere than the toplevel directory".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a new rudimentary test inspired by the examples from jmespath's
README file ([1]).
[1]: https://github.com/jmespath/jmespath.py/blob/develop/README.rst
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
[Thomas: add entry in DEVELOPERS file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Many actual tests require network usage, so just import the module to
check that at least that part works.
Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
zerofree is a utility which scans the free blocks in an ext2 filesystem
and fills any non-zero blocks with zeroes.
https://frippery.org/uml/
The ext2fs/ext2fs.h header guards the inclusion of <sys/types.h> behind
HAVE_SYS_TYPES_H, which is an autotools-defined macro that is only
supposed to be defined by the package itself, i.e. e2fsprogs, and that
should not leak into installed headers. However, e2fsprogs does leak it,
so we work it around, liek gentoo does.
Tested-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- fix MMU dependency for comment; reword comment
- fix multi-line assignment of ZEROFREE_CFLAGS
- do not add comment trailing after assignment
- extend commit log to explain why we need the workaround
- use TARGET_CONFIGURE_OPTS, drop explicit CC=
- install to explicit destination file
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a simple test to verify that msr-tools are working.
The test needs to build a custom x86_64 kernel with support for CPUID and
MSR.
As the TSC_AUX MSR is emulated on qemu we can use it to test that a value
written with wrmsr can indeed be read back with rdmsr.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a simple compress-uncompress test to verify that pixz is working.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Buildroot documentation section 9.2.1.6 "Additional kernel extensions"
indicates support for kernel extensions defined in external buildroot
trees but unfortunately, there didn't seem to be any support in
br2-external script.
This patch copies 'init' code support to include external kernel
extensions defined in 'linux' dir at the br2-external root directory as
explained in documentation.
Signed-off-by: Nicolas POIROT <ni.poirot@laposte.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds a test case that
1) Builds the complete LLVM and CLANG set of host tools
2) Cross-compiles the compiler-rt runtime using CLANG
3) Builds a cross-compiled application using CLANG and the libfuzzer
compiler-rt library.
4) Executes the fuzz application (part of the libfuzzer package) on
target and checks expected output for a heap-buffer-overflow.
Note: The libfuzzer package is just a tutorial example of how to use
the toolkit provided by llvm (Thus not adding it as a full
Buildroot package).
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Romain Naour <romain.naour@smile.fr>
[Arnout: add Matt to DEVELOPERS]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some packages such as libclc need to override cmake toolchain
variables, to avoid errors caused by trying to set overriden
variables ensure that they are not defined before being set.
This prevents difficult to debug silent dropping of overriden
variables.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As we're about to remove the nds32 architecture support from
Buildroot, drop the toolchain-external-andes-nds32 external toolchain
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This Bootlin toolchain has been available for a while, but was not
supported until now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
These toolchains have been marked obsolete by toolchains.bootlin.com
as they are replaced by the mips64-n32 toolchains. See commit:
121e78806b
Will allow to fix:
http://autobuild.buildroot.net/results/d13b35ba5a0f68f72e6592bdd9218b625a3c6554/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The "arches" dict lists the architectures for which Bootlin toolchains
are available, along with the corresponding Buildroot conditions for
those architecture variants.
However, there is nothing that checks that such architectures really
have Bootlin toolchains available. Even if no toolchain is available,
the architecture is considered as support, and will be listed in the
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARCH_SUPPORTS option, making menuconfig
believe that some Bootlin toolchain is available for the selected
architecture variant.
This is currently the case with the "mips64" architecture (as
identified by the Bootlin toolchains project). Such toolchains have
been made obsolete in toolchains.bootlin.com and replaced by the
mips64-n32 toolchains. But "mips64" is still listed in "arches",
causing this architecture to be considered as having Bootlin
toolchains available.
To avoid this to happen in the future, this commit adds a check that
verifies that an architecture listed in "arches" really has at least
one toolchain available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The microblazeel, microblazebe and openrisc toolchains need to select
this option as they don't have any gdb/gdbserver.
Helps in fixing:
http://autobuild.buildroot.net/results/6315ef7b66ee4ae8f870c92186bc674d65f62f2c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The Bootlin i686 toolchain was already made available only on BR2_i386
with !BR2_x86_i486 && !BR2_x86_i586 && !BR2_x86_1000. However, this
was not sufficient as a few other architecture variants of BR2_i386
are "lower" than i686, and they need to be excluded as well.
Allows to fix:
http://autobuild.buildroot.net/results/56ac1a8fa5b34a9ca10eef98ae9fb090b8c762c4/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The current description of the Bootlin ARM toolchains allows them to
be selected for ARM big endian configurations, which obviously doesn't
work as these Bootlin ARM toolchains are little endian only.
We fix this by adding BR2_arm in the list of conditions for those
toolchains.
Will allow to fix:
http://autobuild.buildroot.net/results/7befbb686bb972016ba4e742976dcdb3fed1be11/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit allows to get a proper description of the dependencies for
the RISC-V 64-bit toolchain, that includes the BR2_USE_MMU dependency.
Fixes:
http://autobuild.buildroot.net/results/d6aee9b275b1ec399aea59758ac8f69fdc5691fc/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We now support both MMU-enabled and MMU-less RISC-V 64-bit
configurations. However, the Bootlin toolchain for RISC-V 64-bit only
supports MMU-enabled configurations, but the current logic in
toolchain/toolchain-external/toolchain-external-bootlin/ does not take
this into account, and allows selecting the Booltin toolchain for
MMU-less RISC-V 64-bit configurations.
To fix this, the gen-bootlin-toolchains script is modified to add the
BR2_USE_MMU dependency to the description of the RISC-V 64-bit
toolchain.
However, the BR2_USE_MMU dependency was also added for glibc and musl
toolchains unconditionally, so to avoid duplicating the dependency, we
now only add it only if not already present in the list of
dependencies for this toolchain.
This will allow to fix:
http://autobuild.buildroot.net/results/d6aee9b275b1ec399aea59758ac8f69fdc5691fc/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The Config.in options created for each toolchain were properly taking
into account the !BR2_STATIC_LIBS dependency of glibc
toolchains. However, this dependency was not taken into account into
the main BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARCH_SUPPORTS
option. Consequently, if an architecture is only supported by glibc,
but BR2_STATIC_LIBS is enabled, the main "Bootlin toolchain" option
was visible... but with no selectable toolchain.
We fix this by making sure that
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARCH_SUPPORTS is only true for all
architectures supported, taking into account the fact that some
architectures can only be supported if !BR2_STATIC_LIBS, when the only
available C library is glibc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some constraints on a setup ended up with a plus sign in the path
for historical reasons and would then fail to match on the comparison
of the host/lib dir match. So, the =~ for bash can be augmented
with a double quote expansion to preserve the literal value of
the characters in the variable.
Example Path: /home/vagrant/test+buildroot/per-package
Signed-off-by: Charles Hardin <ckhardin@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
BR2_TARGET_ROOTFS_OCI_ENTRYPOINT_ARGS option has been
replaced by BR2_TARGET_ROOTFS_OCI_CMD in commit [1].
Since BR2_TARGET_ROOTFS_OCI_ENTRYPOINT_ARGS contains
only one item, we can safely replace by
BR2_TARGET_ROOTFS_OCI_CMD in the defconfig fragment
used by the test_oci test case.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2491321058
[1] 08d65d81d8
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yann E. MORIN <yann.morin@orange.com>
Cc: Sergio Prado <sergio.prado@e-labworks.com>
Cc: Matthew Weber <matthew.weber@collins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For the new patch, adding block size options (commit 555f8dfd),
Yann E. MORIN requested updated testcases that specifically ensure
the extreme blocksizes (4K and 1024K) don't cause issues.
This patch splits the current test case in 2, testing with both
block sizes and ensuring the block size was applied in the same
fashion as for the specified compression.
Signed-off-by: Linus Kaschulla <linus@cosmos-ink.net>
[yann.morin.1998@free.fr: keep exisitng test with default size]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
While building the kernel tools, libelf header is missing:
output/TestZfsGlibc/build/linux-5.15.35/tools/objtool/include/objtool/elf.h:10:10: fatal error: gelf.h: No such file or directory
10 | #include <gelf.h>
Select BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF to build host-libelf.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2429014008
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The commit [1] introcuded TestZfsBase as a common function
between all Zfs tests. But TestZfsBase test is executed
as a test itself.
Rename test_run() to base_test_run() to avoid this issue.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2429014006
[1] 593e8cb71f
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As reported by [1], the lxc test is broken since lxc >= 4.0.11.
A patch was added to lxc 4.0.11 to use the new mount api for devpts
setup [2] but the fall back code doesn't work when this new mount
API is not supported. This API was added in kernel 5.6.
(kernel 5.5)
DEBUG conf - conf.c:lxc_setup_devpts_child:1682 - No new devpts instance will be
mounted since no pts devices are required
lxc-start lxc_iperf3 DEBUG conf - conf.c:lxc_setup_dev_console:1966 - Cleared
all (0) mounts from "/dev/console"
lxc-start lxc_iperf3 ERROR mount_utils - mount_utils.c:mount_at:661 - No such
file or directory - Failed to mount "/proc/self/fd/44" to "/proc/self/fd/43"
lxc-start lxc_iperf3 ERROR conf - conf.c:lxc_setup_dev_console:1988 - No such
file or directory - Failed to mount "10(/dev/pts/0)" on "43"
lxc-start lxc_iperf3 ERROR conf - conf.c:lxc_setup_console:2143 - No such file
or directory - Failed to setup console
(kernel 5.6)
lxc-start lxc_iperf3 TRACE mount_utils - mount_utils.c:can_use_mount_api:582 -
Kernel supports mount api
lxc-start lxc_iperf3 TRACE mount_utils - mount_utils.c:move_detached_mount:328
- Attach detached mount 45 to filesystem at 43
lxc-start lxc_iperf3 TRACE conf - conf.c:lxc_setup_dev_console:1990 - Setup
console "/dev/pts/0"
Bump the kernel to the current LTS 5.15.38 version that fully support the
mount API needed by lxc.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2429013708
[1] http://lists.busybox.net/pipermail/buildroot/2022-January/635251.html
[2] be606e16fd
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add TestZfsBase that contains the common parts of the test.
Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
GNU Octave is a high-level language, primarily intended for numerical
computations. It provides a convenient command line interface for
solving linear and nonlinear problems numerically, and for performing
other numerical experiments using a language that is mostly compatible
with Matlab. It may also be used as a batch-oriented language. Octave
has extensive tools for solving common numerical linear algebra
problems, finding the roots of nonlinear equations, integrating
ordinary functions, manipulating polynomials, and integrating ordinary
differential and differential-algebraic equations. It is easily
extensible and customizable via user-defined functions written in
Octave's own language, or using dynamically loaded modules written in
C++, C, Fortran, or other languages.
https://www.octave.org/
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Removed 0001-Correct-a-flaw-in-the-Python-3-version-checking.patch
because is already merged.
Select libcurl as required dependency, because keylocation now
supports https. OpenSSL was already a dependency, so libcurl will be
built with https support.
Add upstream patch to support uClibc.
We update the test cases to use the latest LTS kernel, 5.15.x.
Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
pkg-stats currently uses the services from support/scripts/cpedb.py to
match the CPE identifiers of packages with the official CPE database.
Unfortunately, the cpedb.py code uses regular ElementTree parsing,
which involves loading the full XML tree into memory. This causes the
pkg-stats process to consume a huge amount of memory:
thomas 1310458 85.2 21.4 3708952 3450164 pts/5 R+ 16:04 0:33 | | \_ python3 ./support/scripts/pkg-stats
So, 3.7 GB of VSZ and 3.4 GB of RSS are used by the pkg-stats
process. This is causing the OOM killer to kick-in on machines with
relatively low memory.
This commit reimplements the XML parsing needed to do the CPE matching
directly in pkg-stats, using the XmlParser functionality of
ElementTree, also called "streaming parsing". Thanks to this, we never
load the entire XML tree in RAM, but only stream it through the
parser, and construct a very simple list of all CPE identifiers. The
max memory consumption of pkg-stats is now:
thomas 1317511 74.2 0.9 381104 152224 pts/5 R+ 16:08 0:17 | | \_ python3 ./support/scripts/pkg-stats
So, 381 MB of VSZ and 152 MB of RSS, which is obviously much better.
The JSON output of pkg-stats for the full package set, before and after
this commit, is exactly identical.
Now, one will probably wonder why this isn't directly changed in
cpedb.py. The reason is simple: cpedb.py is also used by
support/scripts/missing-cpe, which (for now) heavily relies on having
in memory the ElementTree objects, to re-generate a snippet of XML
that allows us to submit to NIST new CPE entries.
So, future work could include one of those two options:
(1) Re-integrate cpedb.py into missing-cpe directly, and live with
two different ways of processing the CPE database.
(2) Rewrite the missing-cpe logic to also be compatible with a
streaming parsing, which would allow this logic to be again
shared between pkg-stats and missing-cpe.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- add missing import of requests
- import CPEDB_URL from cpedb, instead of duplicating it
- fix flake8 errors
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some upstream sites are very slow to respond, and the default timeout
of 300 seconds of the aiohttp.ClientSession() is too long. Let's
reduce it to 15 seconds.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is useful when debugging/developing the pkg-stats script.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is useful when debugging/developing the pkg-stats script.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
