Use linux headers same as kernel (5.9 series).
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/917539050
Incorrect selection of kernel headers: expected 5.10.x, got 5.9.x
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
weston does not work on the ti-sgx SDK, so switch to using KMS directly,
and drop the wayland-related config options.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr: split into its own patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When tags was added by commit 011206b2bf
to detect the qemu command line, the qemu_arm_vexpress_tz_defconfig
was ignored due to a build issue.
This build issue has been fixed by previous patches, so we can
enable the runtime testing by adding the tag in the readme.txt
and the post-image script in the defconfig.
Since Qemu from HOST_DIR is now executed directly from BINARIES_DIR,
we can remove all the string before "qemu-system-*".
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump to the latest kernel v5.9.11 and require openssl.
- Switch to PSCI for bringing up the secondary CPUs.
- Switch to GICv3.
- Update the instruction in the readme.txt to use the latest FVP v8
Foundation Platform 11.12 build 38, and to start 4 cores in SMP.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux kernel to 5.9.11 and U-Boot to 2020.10.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump Linux kernel version to 5.9.11.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since Qemu 5.1, this defconfig doesn't boot due to the to small SD card image size (60MB).
qemu-system-arm: sd_init failed: Invalid SD card size: 60 MiB
SD card size has to be a power of 2, e.g. 64 MiB.
You can resize disk images with 'qemu-img resize <imagefile> <new-size>'
(note that this will lose data if you make the image smaller than it currently is).
qemu-system-arm: sd_init failed
From [1]:
"While the possibility to use small SD card images has been seen as
a feature, it became a bug with CVE-2020-13253, where the guest is
able to do OOB read/write accesses past the image size end."
The qemu_arm_vexpress_tz_defconfig doesn't trigger such issue since
it doesn't use the same filesystem support (i.e doesn't use
-drive file=output/images/rootfs.ext2,if=sd,format=raw).
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/766482935
[1] https://git.qemu.org/?p=qemu.git;a=commitdiff;h=a9bcedd15a5834ca9ae6c3a97933e85ac7edbd36
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qemu_arm_versatile doesn't use SD card interface but SCSI, so there is no
need to increase the image size.
The change was for qemu_arm_vexpress_defconfig instead (notice the
name of the defconfig used in gitlab).
This reverts commit cb62a8e0a2.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Select BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y to fix the following
build error:
scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
#include <openssl/bio.h>
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/831421064
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Tested-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Select BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y to fix the following
build error:
scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
#include <openssl/bio.h>
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/831421063
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Tested-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
New U-Boot versions (such as 2020.07 being used) need Python 3.x for
pylibfdt.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/831421210
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
New U-Boot versions (such as 2020.07 being used) need Python 3.x for
pylibfdt.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/831421100
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
New U-Boot versions (such as 2020.10 being used) need Python 3.x for
pylibfdt.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/831421115
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Orangepi Zero Plus board:
- U-Boot 2020.10
- Linux 5.7.19
- Default packages from buildroot
This patch is based on Orangepi Zero Plus2 board support, so genimage
configuration and description is copy pasted. One difference is that
newer Linux and U-Boot are selected. Another difference is Ethernet
support (Plus) instead of WiFi (Plus2).
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As we are about to bump the optee-test package to 3.11.0, which
requires C++ support, let's enable C++ support in the
qemu_arm_vexpress_tz_defconfig, which uses optee-test.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Broke since introduction of linux kernel series 5.9.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
U-Boot 2020.10 no longer provides boot command in default environment for
Udoo Quad/Dual board. Boot script needs to be added to the image. In order
to keep using common infrastructure for freescale boards, move boot files
to root filesystem and add boot script there. Also switch Udoo Neo board
to common freescale infrastructure to simplify maintenance.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
After BSP update Udoo Quad/Dual board once again hangs on boot. On a
new kernel disabling CONFIG_USB option is not enough to work around
the troublesome usb host on Udoo Quad/Dual board. So in order to be
future-proof it makes sense to disable usbh1 block in device tree
rather than fine-tune kernel configuration after BSP updates.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux kernel to 5.8.13 and U-Boot to 2020.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and kernel to the NXP BSP 5.4.24_2.1.0 versions.
On 5.4.24_2.1.0 the revC board is supported by default.
In case an older revB board is used, then the following step in U-Boot is
needed:
=> setenv fdt_file imx8mm-evk-revb.dtb
=> saveenv
=> reset
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and kernel to the NXP BSP 5.4.24_2.1.0 versions.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When using the imx8 NXP kernel, it is preferred to use the imx_v8_defconfig
instead of the generic arm64 defconfig, as the NXP defconfig selects more
imx8 specific drivers.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use a fixed kernel version to have a reproducible and tested
configuration.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since kernel 5.7 is EOL now, this upgrades it to version 5.8.13.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit changes the stm32mp1 configurations to use the TF-A ->
U-Boot boot flow (called "trusted boot flow" by ST) instead of the
U-Boot SPL -> U-Boot boot flow. ST recommands this trusted boot, and
it's also the only one that allows to use the STM32 Cube Programmer
for reflashing devices.
As part of this, the genimage configuration file is now generated, as
it contains some file names that depend on the platform. Removing
partition-type from genimage.cfg is mandatory, since it would cause a
hybrid MBR partition table to be created, which itself would prevent
ATF from finding the ssbl parition.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux kernel to 5.8.13 and U-Boot to 2020.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
as the current kernel version used for this board is 5.7,
make sure that the host kernel version is the same to prevent
build failure due to version miss match.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/779210973
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
now, the build requires host-swig
which is given by BR2_TARGET_UBOOT_NEEDS_PYLIBFDT
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Starting with linux kernel v5.9 all required configuration options are
available in the default config.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since 2020.04 version, the enumeration of MMC has changed, so the boot
script must be updated
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the chromebook elm configuration to use v5.9 instead of an
intermediate release candidate.
At the latter stages of the v5.9 release, a patch was added which
broke the Chromebook Elm HDMI. Therefore add a revert patch to get rid
of this problem. The fix (and the revert) are already on the mailing
list (https://lkml.org/lkml/2020/10/10/32) and should become available
with v5.10
Signed-off-by: Bilal Wasim <bilal.wasim@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2020.10 and kernel to version 5.8.13
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For defconfigs that create a boot envimage, add the host package
uboot-tools and update the script variable names.
Add BR2_PACKAGE_HOST_UBOOT_TOOLS=y just before the existing
BR2_TARGET_UBOOT_ENVIMAGE option. Note that for the defconfigs that are
not manually formatted (i.e. just the result of 'make savedefconfig'),
this puts them in the wrong place. However, it's easier this way, and
it's more consistent in general to have the definition of the envimage
close to BR2_TARGET_UBOOT itself.
Related to 78559d699a
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
For defconfigs that create a boot script, add the host package
uboot-tools and update the script variable names.
Add BR2_PACKAGE_HOST_UBOOT_TOOLS=y just before the existing
BR2_TARGET_UBOOT_BOOT_SCRIPT option. Note that for the defconfigs that
are not manually formatted (i.e. just the result of 'make
savedefconfig'), this puts them in the wrong place. However, it's easier
this way, and it's more consistent in general to have the definition of
the script close to BR2_TARGET_UBOOT itself.
Special cases:
- nanopi_* had the definition of the _SCRIPT variable in a weird place.
These are moved to close to BR2_TARGET_UBOOT.
- Same for orangepi_plus.
- orangpi_pc_* already had BR2_PACKAGE_HOST_UBOOT_TOOLS=y so it's not
added there.
Related to db2b684126
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since Qemu 5.1, this defconfig doesn't boot due to the to small SD card image size (60MB).
qemu-system-arm: sd_init failed: Invalid SD card size: 60 MiB
SD card size has to be a power of 2, e.g. 64 MiB.
You can resize disk images with 'qemu-img resize <imagefile> <new-size>'
(note that this will lose data if you make the image smaller than it currently is).
qemu-system-arm: sd_init failed
From [1]:
"While the possibility to use small SD card images has been seen as
a feature, it became a bug with CVE-2020-13253, where the guest is
able to do OOB read/write accesses past the image size end."
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/766482935
[1] https://git.qemu.org/?p=qemu.git;a=commitdiff;h=a9bcedd15a5834ca9ae6c3a97933e85ac7edbd36
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
[yann.morin.1998@free.fr:
- don't force network range
- don't forward TCP port
- drop post-build script to add tty1
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit adds supports for building buildroot kernel + rootfs
for MT8173 Elm board, also known as Chromebook Elm
(https://www.acer.com/ac/en/US/content/series/acerchromebookr13).
Though Chrome-OS is officially supproted on this board, the
mainline kernel works as well (benchmarks + conformance), and so
the 5.9 kernel is used. As the 5.9 kernel isn't yet released, we
use the 5.9-rc5 for now, which will be up-revd to 5.9 once its
released.
Using the mainline kernel means that we have to apply certain patches
to get the HDMI screen working. These patches are lying in the
"drm-misc-next" list and will make it to the kernel after 5.9. At that
time, we will remove the patches and point Buildroot to use the latest
kernel (hopefully, 5.10).
This commit also adds an ITS file (for creating FIT images), an ARGS
file (for providing kernel args) and a "sign.sh" script to generate
signed kernel images. Though the "sign.sh" is very similar to the
coresponding file under board/chromebook/snow, it cannot be shared
between both boards, as the script requires access to the board
specific its / args file.
Additionally a readme & defconfig is added to help the user get started.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The same script is going to be used by the Chromebook Elm to generate
a bootable SD / USB image. Therefore, move the script out of the snow
folder to one level above (board/chromebook/snow -> board/chromebook).
Update the chromebook_snow_defconfig to reflect the new location of
the script.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
