Similar to the other compressors. Notice that we use the -l (legacy format)
for Linux kernel initrd compatibility.
Lz4 decompression is supported by the Linux kernel since 3.11.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, to register a filesystem, one has to call:
$(eval $(call ROOTFS_TARGET,blabla))
This is very unlike the package infrastructure, where the name of the
package is automatically guessed by the infra.
It turns out that we can now do that for the filesystem infra too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the ubifs-in-ubi-image ("UBI image" thereafter) filesystem
is half an option of the ubifs filesystem, half a filesystem on its
own: the config options are options of the ubifs filesystem, but the
.mk code is in a separate .mk and registers a real filesystem.
Make it a full filesystem on its own, in its own directory tree.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It needs mkzftree from zisofs-tools, so we add a dependency to it, and
we call that one explicitly (to avoid using the one from the host in
PATH).
It also needs the the uncompressed kernel image, but because it is
already in target/ so it gets compressed by mkzftree. We have two
options:
- compress everything but the kernel image,
- compress everything, kernel included, and recopy it later.
We choose the latter, because it is the simplest solution. So, we always
define the kernel-copy hook, but only register it when needed.
Finally, it needs a kernel with support for transparent
(de)compression, so we update the existing test config.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: rename option to BR2_TARGET_ROOTFS_ISO9660_TRANSPARENT_COMPRESSION.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This line has been sitting there unchanged for years now, but it does
not follow current best pratices, that is:
- do not use imediate assignment,
- split lines longer than ~80 chars.
Fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some filesystems have PRE_GEN hooks that create a directory structure
under the temporary directory.
For example, iso9660 will create a sub-directory where it stores the
kernel (in case of initramfs or initrd).
So, we must run the PRE_GEN hooks after we cleanup/create the temporary
directory.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/42835965https://gitlab.com/buildroot.org/buildroot/-/jobs/42835967
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that they are in their own directory and no longer pollute the build
dir, there is no point in removing them.
Furthermore, a follow-up patch will require that those files survive
when more than one filesystem image is generated.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use the newly-introdued $(FS_DIR) location to store temporary files.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we create a bunch of temporary files in $(BUILD_DIR), while
assembling the filesystem images.
Move those files to their own sub-directory.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove it just before generating the filesystem image.
This way, removing-and-recreating the file encloses the actual
image generation as tightly as possible.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The only users of post-target rules were ext2, cpio and initramfs.
Of those, ext2 and cpio were changed to use post-gen hooks, while
initramfs was not even using the generic rootfs infra and was fixed
to no longer reference post-target rules.
Besides, the comment in the infra was really misleading: it referenced
initramfs implying it was the sole user of that feature, even though
initramfs was not using the fs infra.
Furthermore, using post-target rules was inherently broken for top-level
parallel builds, because filesystems had to ensure the ordering by
themselves. Of the two real users of post-target rules (cpio and ext2),
one did enforce rules ordering (apparently correctly), while the other
forgot to do so.
We can get rid of post-target rules altogether, now.
Add a legacy check, to catch out-of-tree (e.g. br2-external) users of
post-target rules, and instruct them to switch to post-gen hooks instead.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We already have a mechanism for running stuff after the filesystem is
generated, and that's called post-gen hooks.
Use those hooks.
Note: for cpio (and unlike ext2 previously), the dependency chain was
correct, in that the post-target rule correctly depended on the image
rule. Nonetheless, we still want to fix it for consistency.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
post-target rules are probably not resilient to parallel builds, given
that they do not depend on the image being generated first.
Beside, we already have a mechanism for running stuff after the
filesystem is generated, and that's called post-gen hooks.
Use those hooks.
Note: this basically reverts 75b6303 (rootfs-ext2: make the symlink as a
_POST_TARGET) since we've now re-introduced post-gen hooks.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
rootfs-initramfs is not using the generic fs infrastructure, because
there is virtually nothing to do to build the initramfs image: there is
no actual image to be built to begin with.
The only purpose of rootfs-initramfs is to ensure the rootfs.cpio image
is built and then that the Linux kernel is rebuilt with that rootfs.cpio
as initramfs source.
Using variables of the fs infra like if it were used is misleading. It
looked nice as long as there was the possibility that rootfs-initramfs
would one day use the fs infra. But there's no way that will happen any
time soon.
Furthermore, the linux' rule linux-rebuild-with-initramfs now already
depends on rootfs-cpio by itself, so we need not duplicate this
dependency in rootfs-initramfs.
Still, we want to advertise that the dependency is on rootfs-cpio, so
we get nice dependency graphs (and not expose the internal
linux-rebuild-with-initramfs rule to the users).
So, remove the variables and directly define the rules.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When multiple hooks are registred, both pre-a and post-command hooks'
foreach loops need to have a separator at the end in order for the
code to work as intended. Without the separator all hooks end up as a
one single line command thus making all but the first hook into
no-ops.
Fixes: 4628b6f3b4 ("fs: add pre- and post-command hooks")
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In case we're using an initrd, we create an empty "root" directory that
will contain only the bootloader stuff, not the actual root filesystem,
because it is in an initrd (standalone or initramfs).
We have to ensure that the directory is empty before assembling the
filesystem (to avoid any file lingering from a previous run, like the
sequence "make; make"). So we first remove it before we create it, so
that on each build (especially not-from-scratch builds) we get the exact
expected content without any leftover.
However, the macro responsible for that, although defined since 7080eef9,
was never called.
Fix that by registering it as a pre-gen hook.
Note: the directory need not be created, as there are quite a few
"install -D" commands that ensure it is created. Yet, we prefer to
create it explicitly to avoid any confusion.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
By default, mksquashfs uses all the CPUs available, like us with
BR2_JLEVEL=0.
However, by setting BR21_JLEVEL to non-zero, a user volutarily limits
the number of jobbs allowed to run concurrently (for various reasons,
like this is not a priority task on the machine; or like the
autobuilders, to spread the load accross multiple runs without
overloading the machine).
So, propagate tthe parallelisn settings down to mksquashfs, to repect
the user's will.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Tested-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In some cases, the directory structure we want in the filesystem is not
exactly what we have in target/
For example, when systemd is used on a read-only rootfs, /var must be a
tmpfs. However, we may have packages that install stuff in there, and
set important rights (via the permission-table). So, at build time, we
need /var to be a symlink to the remanent location (/usr/share/factory)
while at runtime we need /var to be a directory.
One option would have been to have /var as a real directory even during
build time, and in a target-finalize hook, move everything out of there
and into the "factory" location. However, that's not possible because
it's too early: some packages may want to set ownership and/or acces
rights on directories or files in /var, and this is only done in the
fakeroot script, which is called only later during the assembling of the
filesystem images.
Also, there would have been no way to undo the tweak (i.e. we need to
restore the /var symlink so that subsequent builds continue to work) if
it were done as a target-finalize hook.
The only solution is to allow packages to register pre- and post-hooks
that are called right before and right after the rootfs commands are
executed, and inside in the fakeroot script.
We can however not re-use the BR2_ROOTFS_POST_FAKEROOT_SCRIPT feature
either because it is done before the filesystem command, but there is
nothing that is done after. Also, we don't want to add to, and modify a
user-supplied variable.
So, we introduce two new variables that packages can set to add the
commands they need to run to tweak the filesystem right at the last
moment.
Those hooks are not documented on-purpose; they are probably going to
only ever be used by systemd.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we now request that the user sets the exact size of the ext2/3/4
filesystem, we've had quite a few users wondering what was going on when
they enable too much and the default 60M are no longer enough.
When mkfs.ext2 fails, print a hint that the user should check the size
setting.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
[Arnout: Add *** and redirect to stderr]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
And add myself to the DEVELOPPERS for squashfs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This change deprecates the ext2/3/4 rootfs size in blocks symbol in
favor of one that mimic the fs-size argument behavior of mkfs (i.e.
size in a human readable format accepting k, m, g or t suffix or their
upper-case variants).
This change also updates the defconfigs that used to set
BR2_TARGET_ROOTFS_EXT2_BLOCKS symbol.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/share' | xargs sed -i 's%$(HOST_DIR)/usr/share%$(HOST_DIR)/share%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/sbin' | xargs sed -i 's%$(HOST_DIR)/usr/sbin%$(HOST_DIR)/sbin%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/bin' | xargs sed -i 's%$(HOST_DIR)/usr/bin%$(HOST_DIR)/bin%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mkfs is now capable of generating rootfs images. Use mkfs instead of
genext2fs.
If not set, we now let mkfs calculate the block size and the number of
inodes needed.
This change also adjusts the options to meet those of mkfs.
Notes:
* Passing a null inode number to mkfs triggers its automatic calculation.
* Passing a fs-size with no unit suffix to mkfs is interpreted as using
1K block size.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: don't pass PATH when calling mkfs.ext, just call it directly
from $(HOST_DIR)/usr/sbin, as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Soon, the ext{2,3,4} rootfs image will no longer be generated with
genext2fs, but using mke2fs instead which has no support for the extra
inode number option.
So, deprecate the BR2_TARGET_ROOTFS_EXT2_EXTRA_INODES option and
recommend, in lieu, to set the total inode number, taking account of
the extra ones if needed.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ext filesystems can use a block size of 1024, 2048, or 4096 bytes, the
former being interesting to store small files, while the latter being
more intersting to store bigger files.
So far, we were using the default, which was to use a 1024-byte block.
Continue doing so (for now...).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
No option is conditional anymore, so just collate them into a single
assignment.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The previous default, zero, just meant "use the default value of the
filesystem generator", which happened to be 5% (the traditional value
for all ext-creating tools we've ever seen).
So, change the new default accordingly to 5%.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
... since passing an empty string is equivalent to not setting a label.
And fix the syntax highlighting in some editors...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
... since zero also means auto for the mke2img script, now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Auto-calculation of the rootfs size cannot be done in a reliable way
as it depends on the host filesystem and is broken on non ext4 host
(see bugs [1] [2]). So let the user specify the size he wants for his
rootfs.
[1] https://bugs.busybox.net/show_bug.cgi?id=8831
[2] https://bugs.busybox.net/show_bug.cgi?id=9496
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: as suggested by Arnout, use 60 MB as the default size instead
of 64 MB.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The iso9660 generation for grub2 assumes that grub-eltorito.img is
available. However, this image is only available for the i386-pc target
(i.e. legacy BIOS). An EFI-bootable iso9660 requires a different layout.
Since we currently can't generate the EFI-bootable iso9660 layout,
require the i386-pc target to be selected in grub.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reported-by: arnaud.miche@orange.com
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The tar --no-recursion option is position sensitive. It only affects following
file listing options. Move --no-recursion before the -T option to make it
effective. This fixes duplication of entries in the generated rootfs.tar
archive.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, when there is no syztem device table (permissions or static
devices) defined, then package permissions are not applied, because they
are guarded by the check on the system device tables being non empty.
Fix that by narrowing the guarding condition.
Note that the dependency on host-makedevs was not conditional; we always
build it even if we don't need it. Making it conditional is not
possible, because we don't know all the packages permissions by the time
the fs infra is parsed (packages from br2-external are parsed after it).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rev0 is very old (E.G. from before Linux was maintained in git), the kernel
prints a scary warning when used:
EXT4-fs warning (device sda): ext4_update_dynamic_rev:746: updating to rev 1
because of new feature flag, running e2fsck is recommended
And rev0 support is broken in u-boot 2016.11:
http://lists.denx.de/pipermail/u-boot/2016-December/275916.html
So default to rev1 instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 8035ceb56c.
Moving to pseudo brought a number of issues (and longer compilation time),
so lets stick with fakeroot now that the reported ubi issue has been worked
around.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#9386
GNU sed -i misbehaves on systems with SELinux enabled, as it tries to copy
to the SELinux security context (xattr) from the source file to to the new
destination file, which fails under fakeroot and leaves the file with 000
permissions, causing ubinize to fail when it cannot read to configuration
file.
So as a workaround, combine the install and tweak steps in a single
sed with a redirect to the destination file instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make sure all files in $TARGET_DIR have a defined modification time
before to generate filesystems.
This work was sponsored by `BA Robotic Systems'.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to make tar images reproducible, force files order in tarball.
This work was sponsored by `BA Robotic Systems'.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the commit 6dd7bbb591, the label does
not need anymore to be quoted. Even worse it *must* not be simple-quoted,
unless the label will contain the double-quotes from the config variable
BR2_TARGET_ROOTFS_EXT2_LABEL.
The commit mentionned above has replaced echo by printf:
- echo "$$(ROOTFS_$(2)_CMD)" >> $$(FAKEROOT_SCRIPT)
+ $$(call PRINTF,$$(ROOTFS_$(2)_CMD)) >> $$(FAKEROOT_SCRIPT)
Since this commit the rootfs label contains extra double-quotes.
$ blkid
/dev/mmcblk0: LABEL=""BR 2016.08"" UUID="xxx"
^ ^
With this fix, the extra double-quotes have disappeared:
/dev/mmcblk0: LABEL="BR 2016.11-rc2" UUID="yyy"
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit 41f0688d91 ("fs/iso9660:
convert to the filesystem infrastructure"), the is9660 logic uses the
common filesystem infrastructure, so the dependency on host-fakeroot is
no longer needed, and has actually become bogus since we switched to
host-pseudo.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
fakeroot misbhaves when there are SElinux contexts, as reported in #9386,
and further detailed in https://bugzilla.redhat.com/show_bug.cgi?id=1238802
A proposal in the FC bug is to use pseudo instead of fakeroot. Pseudo is
a from-scratch re-implementation of fakeroot; it is used in Poky/OE
instead of fakeroot.
Fixes#9386.
Reported-by: Andrey Yurovsky <yurovsky@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Andrey Yurovsky <yurovsky@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some users have the need to be able to tweak the content of the target
rootfs with root-like rights, that is, from inside the fakeroot script.
Add a new system option to allow those users to provide a list of
scripts, like the post-build and post-image scripts, that will be run
from our fakeroot script.
[Peter: pass TARGET_DIR to scripts, tweak help text]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Cam Hutchison <camh@xdna.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Move TAR_OPTS so that long options (or any option with an initial '-')
may be passed to tar. Since TAR_OPTS is at the front of the list, single
letter options still work.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We directly running this script, so it should start with a sha-bang (not
sure why/how it works today...).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When that was added (in 975e30b, fs/squashfs: fix image file
permissions), the reasons were not quite explicit.
We are now forcing the umask, and various tests have shown that the mode
on the generated image file are correct without the chmod.
Remove it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We can now properly use multi-line commands, so use that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we can properly printf a multi-line command, there is no need
to use a single command to gnerate the squashfs image.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we can properly printf a multi-line command, there is no need
to use a single command to gnerate the jffs2 image.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use the newly-introduced PRINTF macro to generate printf formats
that do "The Right Thing (TM)".
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
.. and add the missing newline-at-end-of-file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixed comment typos as to improve clarity.
Signed-off-by: Brian 'redbeard' Harrington <redbeard@coreos.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We will need the users and groups to get defined before we can use them
from makedevs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add two options to the ext2 filesystem, one to add extra free space, one
to add extra free inodes.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Advanced XIP File System is a Linux kernel filesystem driver that
enables files to be executed directly from flash or ROM memory rather
than being copied into RAM. It has the ability to store individual
*pages* in a file uncompressed/XIP or compressed/Demand Paged.
This commit only adds support for 'XIP all' mode, so all the files that
have the execute attribute set will be XIP'ed.
At the moment, the FS is not supported in Linux mainline (v4.3-rc5), so
the kernel has to be built with the axfs patches to be able to read it.
Patches can be found here: https://github.com/jaredeh/axfs
[Thomas: rewrap Config.in help text.]
Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Probably a leftover from our last fs infra reworking a couple of years
ago.
Incidentally, also added a newline at the end of the file.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
lz4 offers a high compression mode. A minimalistic file system shrinks by about 15%.
[Peter: Unconditionally use hc mode for lz4 instead of introducing another option]
Signed-off-by: Matthias Weisser <m.weisser.m@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Replace Grub-specific "menu.lst" with "menu config" in the
BR2_TARGET_ROOTFS_ISO9660_BOOT_MENU Kconfig entry text, and mention
missing grub.cfg for Grub 2.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The common filesystem infrastructure already supports a
<fs>_PRE_GEN_HOOKS variable, which allows filesystem makefiles to
register some actions to be done before the root filesystem image is
generated.
This commit adds a similiar <fs>_POST_GEN_HOOKS variable, which will
allow filesystem makefiles to do some actions after the filesystem
image has been generated. It will initially be used by the iso9660
filesystem to delete the temporary directory it creates.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Noé Rubinstein <nrubinstein@aldebaran.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This installs every module selected by the BR2_TARGET_SYSLINUX_C32.
This is useful when using a custom Isolinux configuration file that may use
comboot modules.
Signed-off-by: Noé Rubinstein <nrubinstein@aldebaran.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The code in fs/common.mk properly triggers the build of host-mkpasswd
when at least one package specifies a <pkg>_USERS variable. However,
when no selected package specifies a <pkg>_USERS variable but the user
uses a custom users table through BR2_ROOTFS_USERS_TABLES, then we
forget to build host-mkpasswd, leading to build failures if you don't
have mkpasswd installed in your machine.
This commit fixes that by taking into account both the package users
table and the custom users table when deciding to depend or not on
host-mkpasswd.
Reported-by: Auke Willem Oosterhoff <oosterhoff@baopt.nl>
Cc: Auke Willem Oosterhoff <oosterhoff@baopt.nl>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Currently, the generated rootfs will be called rootfs.iso9660, but the
temporary directory we create while building it is called
rootfs-iso9660.tmp. They are in different directories so it's not so
obvious, but still to be consistent it's better to call the temp dir
rootfs.iso9660.tmp.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After having extended the iso9660 support to allow isolinux as an
alternative to grub, this commit adds grub2 as a third
alternative. With the previous work done to support isolinux, adding
support for grub2 is fairly trivial.
[Thomas: set timeout to 10 seconds and not 5 seconds, in order to
match the configuration used for grub.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit adds a new option, which allows, when isolinux is used as
the bootloader, to generate an "hybrid" ISO image. Such images can
either be booted from CD-ROM or from USB keys. It simply uses the
isohybrid tool provided by syslinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
After all the preparation commits, this commit finally adds the
iso9660 support itself. Besides adding a new Config.in entry, a little
bit of .mk code and the isolinux.cfg default configuration, not much
is needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In preparation to the introduction of the support for other
bootloaders than Grub, this commit switches from having the iso9660
support "select" the necessary bootloader to using a "depends on".
The main motivation is that the isolinux bootloader support will
really need to do a "depends on", due to the need of having a certain
option enabled, but this option being a kconfig "choice".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In preparation to the introduction for the support of other
bootloaders than Grub, this commit adds a "choice ... endchoice" block
with just the Grub option, and adds some conditionals in the
iso9660.mk code for the Grub specific parts.
Of course, for now those conditionals are a bit useless with just this
commit, but they become useful with the followup commits.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In preparation to the introduction of the support for other
bootloaders that Grub, this commit introduces two new variables:
- ROOTFS_ISO9660_BOOTLOADER_CONFIG_PATH, which gives the full path to
the bootloader configuration file
- ROOTFS_ISO9660_BOOT_IMAGE, which gives the relative path of the
main bootloader image, as needed by genisoimage's -b option.
There are no functional changes made, as the variables are for now
always set to the same value.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Until now, the iso9660 filesystem handling only supported using an
initrd/initramfs to store the root filesystem, which is very different
from what we do with the other filesystems.
This commit changes the iso9660 logic to also allow using directly an
iso9660 filesystem to store the root filesystem. A new option,
BR2_TARGET_ROOTFS_ISO9660_INITRD, is created to tell the iso9660 that
we want to use an initrd and not directly the root filesystem in
iso9660 format. This option defaults to 'y' to preserve the existing
behavior.
After this commit, we therefore have three possibilities:
* BR2_TARGET_ROOTFS_ISO9660=y, with BR2_TARGET_ROOTFS_INITRAMFS and
BR2_TARGET_ROOTFS_ISO9660_INITRD disabled. In this case, the
iso9660 filesystem is directly the contents of the root filesystem
(since is possible thanks to the Rockridge extensions that were
already enabled using the -R option of genisoimage). Obviously, it
means that the root filesystem is read-only.
* BR2_TARGET_ROOTFS_ISO9660=y and BR2_TARGET_ROOTFS_INITRAMFS=y (the
value of BR2_TARGET_ROOTFS_ISO9660_INITRD doesn't matter). In this
case, the root filesystem is already linked into the kernel image
itself, as an initramfs. So the iso9660 filesystem doesn't contain
the root filesystem as is, but just the bootloader and the kernel
image.
* BR2_TARGET_ROOTFS_ISO9660=y, BR2_TARGET_ROOTFS_ISO9660_INITRD=y and
BR2_TARGET_ROOTFS_INITRAMFS disabled. In this case, a separate
initrd is used. The iso9660 filesystem only contains the
bootloader, the kernel and the initrd.
In order to support the first case out of the box, root=/dev/sr0 is
added on the kernel command line in the example Grub configuration
file, so that the kernel knows where the root filesystem is
located. This argument is ignored when initrd/initramfs are used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The iso9660.mk modifies the menu.lst file from Grub to set the correct
initrd/kernel image locations. However, with the upcoming support of
other bootloaders for iso9660 filesystems, we need to modify a bit
this logic.
Instead of relying on the specific details of the grub menu.lst
syntax, we introduce the __KERNEL_PATH__ and __INITRD_PATH__ magic
keywords, which iso9660.mk will replace by the appropriate
values. They can therefore be used where needed in grub menu.lst, and
in similar configuration files of other bootloaders, as will be
supported in the following commits.
Also, in order to be consistent with the soon to be introduced support
for having the root filesystem itself as iso9660, this commit changes
the installation location of the initrd and kernel. Instead of being
/initrd and /kernel, they become /boot/initrd and
/boot/$(LINUX_IMAGE_NAME).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Instead of using directly the splash image from the Buildroot source
directory boot/grub, this commit changes the iso9660 logic to use the
splash image installed in $(TARGET_DIR)/boot/grub.
This effectively allows a user to use a custom splash image by
installing it to $(TARGET_DIR) through a rootfs overlay or using a
post-build script.
Suggested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In order to simplify the introduction of the support for using ISO9660
as the real root filesystem, this commit changes the location of the
grub splash image. This makes it match where the splash image is
located in $(TARGET_DIR), so that regardless of whether the
initrd/initramfs solution or the real iso9660 filesystem solution are
used, the splash image is installed at the same location.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
For consistency reasons, this commit renames all internal variables of
iso9660.mk to use the ROOTFS_ISO9660 prefix.
While we're at it, replace a useless ':=' by '='.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
We already enable the Rockridge extension by default when building
ISO9660, so let's also enable the Joliet extension which allows to
support Unicode file names and long file names.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit converts the iso9660 logic to the common rootfs
infrastructure. What previously prevented it from being converted is
that the iso9660 logic needed to remove a temporary folder after the
image has been created.
However, since Buildroot typically keeps build artefacts around, this
commit changes the logic to keep this temporary folder around. Thanks
to this change, converting to the common rootfs infrastructure becomes
possible.
In addition, the temporary folder is renamed from $(BUILD_DIR)/iso9660
to the more descriptive $(BUILD_DIR)/rootfs-iso9660.tmp.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In preparation to the addition of numerous additional options to the
iso9660 filesystem logic, use a if ... endif block instead of a
depends on for the only option that currently exists.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Fixes#8186
Mkfs.jffs2 accepts a --pagesize parameter, which allows specifying the size
of the virtual memory page size of the target machine, where the image will
be used. (This is the value of the PAGE_SIZE macro in Linux.) In most cases
the parameter doesn't need to be set as the default value of 4 kB is usually
correct.
The parameter was used incorrectly in Buildroot -- it was set to the page
size of flash memory chip -- this commit fixes this problem. Now the
--pagesize parameter is not used at all (unless the user explicitly chooses
to use a custom value during configuration). All existing defconfigs were
corrected to match the new configuration variable names.
[Peter: reword, add Config.in.legacy handling]
Signed-off-by: Michał Leśniewski <mlesniew@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 4570dbcb14
("4570dbcb14b394d8f3c97baf4c9e5f4f225d1d37") added the dependencies of
rootfs building logic to PACKAGES, only thinking about the case where
rootfs building logic actually depends on real, normal packages
(host-mtd, host-genext2fs, etc.). But some file systems (rootfs-ubi)
depend on other filesystem images (rootfs-ubifs). And such targets
should not be added to PACKAGES, otherwise an incorrect circular
dependency is created.
This commit fixes that by only adding the rootfs building logic
dependencies that do *not* start with rootfs- to the global PACKAGES
variable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The logic for creating most of the filesystem images requires a
certain number of host packages to be built. However, those packages
are not currently listed in the global PACKAGES variables, and they
are not dependencies of any other package listed in the PACKAGES
variable.
While it does not have any practical implications, it makes sense to
have those packages listed in the global PACKAGES variable, which this
commit implements.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit improves the filesystem handling code to declare its
various targets as PHONY when appropriate.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When a filesystem image is xz-compressed, the XZ variable is used to refer
to the xz compression tool, but it is not necessarily available. Add a
proper dependency to fix that.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the generated fakeroot script has no error checking causing
make to continue building even if some of the fakeroot script commands
have failed. This can cause e.g. using an invalid device tables to go
unnoticed.
So add a "set -e" to the start of the fakeroot script so it will exit
with a failure code as soon as one of the script commands fails.
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If a target user is asigned a UID (e.g. 1000) that happens to also exist
on the build machine, tar will happily store the username for that user.
This can be seen by some as potential information disclosure.
Instruct tar to just store the numeric uid/gid.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Filesystems of the ext familly can carry a filesystem label.
Add an option for the user to specify such a label.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Károly Kasza <kaszak@gmail.com>
Tested-by: Karoly Kasza <kaszak@gmail.com>
Reviewed-by: Karoly Kasza <kaszak@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And get rid of the old genext2fs.sh wrapper.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Karoly Kasza <kaszak@gmail.com>
Reviewed-by: Karoly Kasza <kaszak@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we are using a shell script called genext2fs, that
impersonates the real genext2fs. But that script does much more than
just call genextfs: it also calls tune2fs and e2fsck.
Because it impersonates genext2fs, we can not easily add new options,
and are constrained by the genext2fs options.
But it turns out that, of all the options supported by the real
genext2fs, we only really care for a subset, namely:
- number of blocks
- number of inodes
- percentage of blocks reeserved to root
- the root directory which to generate the image from
So, we introduce a new host package, mke2img, that is intended to
eventually replace genext2fs.sh.
This new script is highly modeled from the existing genext2fs.sh, but
was slightly refreshed, and a new, supposedly sane set of options has
been choosen for the features we need (see above), and some new options
were added, too, rather than relying on the arguments order or
environment variables:
-b <nb-blocks> number of blocks in the filesystem
-i <nb-inodes> number of inodes in the filesystem
-r <pc-reserved> percentage of reserved blocks
* -d <root-dir> directory containing the root of the filesystem
* -o <img-file> output image file
-G <ext-gen> extfs generation: 2, 3, or 4 (default: 2)
-R <ext-rev> ext2 revision: 0 or 1 (default 1)
-l <label> filesystem label
-u <uid> filesystem UUID; if not specified, a random one is used
* Mandatory options
Since the upstream e2fsprogs are expected to release a new mke2fs that
will be able to generate a filesystem image from a directory, we then
will be able to replace all the logic in mke2img, to use mke2fs instead
of the (relatively fragile) combination of the three tools we currently
use.
An entry is added for it in the "Host utilities" menu, so it can be
selected for use by post-{build,image} scripts. The ext2 filesystem
selection is changed to select that now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Karoly Kasza <kaszak@gmail.com>
Reviewed-by: Karoly Kasza <kaszak@gmail.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This way we don't depend on the permissions of files under boot/ or fs/,
which aren't tracked.
While we're at it, change all 'cp' usages into 'install' with the
correct mode for each file.
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The "iso image" rootfs target is a special one, as it does not use the
ROOTFS_TARGET infrastructure. The absence of ROOTFS_*_DEPENDENCIES
variable makes "make source" to skip this target's dependencies
(namely host-cdrkit and it's children) obstructing an offline build.
[Thomas: add the rootfs-iso9660-show-depends target, so that 'make
graph-depends' doesn't break when iso9660 is selected.]
Signed-off-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Buildroot coding style defines one space around make assignments and
does not align the assignment symbols.
This patch does a bulk fix of offending packages. The package
infrastructures (or more in general assignments to calculated variable
names, like $(2)_FOO) are not touched.
Alignment of line continuation characters (\) is kept as-is.
The sed command used to do this replacement is:
find * -name "*.mk" | xargs sed -i \
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*$#\1 \2#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\]\+\)$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\ \t]\+\s*\\\)\s*$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\(\s*\\\)#\1 \2\3#'
Brief explanation of this command:
^\([A-Z0-9a-z_]\+\) a regular variable at the beginning of the line
\([?:+]\?=\) any assignment character =, :=, ?=, +=
\([^\\]\+\) any string not containing a line continuation
\([^\\ \t]\+\s*\\\) string, optional whitespace, followed by a
line continuation character
\(\s*\\\) optional whitespace, followed by a line
continuation character
Hence, the first subexpression handles empty assignments, the second
handles regular assignments, the third handles regular assignments with
line continuation, and the fourth empty assignments with line
continuation.
This expression was tested on following test text: (initial tab not
included)
FOO = spaces before
FOO = spaces before and after
FOO = tab before
FOO = tab and spaces before
FOO = tab after
FOO = tab and spaces after
FOO = spaces and tab after
FOO = \
FOO = bar \
FOO = bar space \
FOO = \
GENIMAGE_DEPENDENCIES = host-pkgconf libconfuse
FOO += spaces before
FOO ?= spaces before and after
FOO :=
FOO =
FOO =
FOO =
FOO =
$(MAKE1) CROSS_COMPILE=$(TARGET_CROSS) -C
AT91BOOTSTRAP3_DEFCONFIG = \
AXEL_DISABLE_I18N=--i18n=0
After this bulk change, following manual fixups were done:
- fix line continuation alignment in cegui06 and spice (the sed
expression leaves the number of whitespace between the value and line
continuation character intact, but the whitespace before that could have
changed, causing misalignment.
- qt5base was reverted, as this package uses extensive alignment which
actually makes the code more readable.
Finally, the end result was manually reviewed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Yann E. Morin <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The linux-* mirror targets of linux26-* have been added a very long time ago
(2010) and linux 2.6 is now considered 'old' anyway. It no longer makes
sense to support these linux26-* targets, so this patch removes them.
This is a simplification introduced in preparation of the kconfig-package
infrastructure.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The inner-xxx-targets in the buildroot package infrastructures are
evaluated using $(eval) which causes variable references to be a bit
different than in regular make code. As we want most references to be
expanded only at the time of the $(eval) we should not use standard
references $(VAR) but rather use double dollar signs $$(VAR). This includes
function references like $(call), $(subst), etc. The only exception is the
reference to pkgdir/pkgname and numbered variables, which are parameters to
the inner block: $(1), $(2), etc.
This patch introduces consistent usage of double-dollar signs throughout the
different inner-xxx-targets blocks.
In some cases, this would potentially cause circular references, in
particular when the value of HOST_FOO_VAR would be obtained from the
corresponding FOO_VAR if HOST_FOO_VAR is not defined. In these cases, a test
is added to check for a host package (the only case where such constructions
are relevant; these are not circular).
Benefits of these changes are:
- behavior of variables is now again as expected. For example, setting
$(2)_VERSION = virtual in pkg-virtual.mk will effectively work, while
originally it would cause very odd results.
- The output of 'make printvars' is now much more useful. This target shows
the value of all variables, and the expression that led to that value.
However, if the expression was coming from an inner-xxx-targets block, and
was using single dollar signs, it would show in printvars as
VAR = value (value)
while if double dollar signs are used, it would effectively look like
VAR = value (actual expression)
as is intended.
This improvement is for example effective for FOO_DL_VERSION, FOO_RAWNAME,
FOO_SITE_METHOD and FOO_MAKE.
The correctness of this patch has been verified using 'make printvars',
'make manual' and 'make legal-info' before and after applying this patch,
and comparing the output.
Insight-provided-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the symlinks in the generated filesystems will have the
UID of the user running the build, because 'chown' does not change
the ownership of symlinks, by default.
Although the implications are limited, some may not want that UID
to leak in the generated filesystems.
So, use 'chown -h' so even symlinks get properly chowned.
Reported-by: Angelo Dureghello <angelo@barix.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Closes#7160
Since f46f81de13 (Don't build host-xz needlessly), host-xz is no longer
unconditionally built when xz fs compression is requested, so don't
explicitly refer to it.
Instead, rely on our check-host-xzcat logic to ensure xz is available and
set the path to ensure our host variant gets picked up if not available on
the build machine.
While we're at it, get rid of the now unused XZ variable.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using the tar filesystem method, the build output shows at the end:
echo " tar -c""f <br>/output/images/rootfs.tar -C <br>/output/target ." >>
<br>/output/build/_fakeroot.fs
The inner set of quotes can be easily removed by properly stripping the tar
options (coming from the buildroot configuration).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
export PATH=$(BR_PATH) so that the fakerooted script uses our
own tools before any of the host-system ones.
Reported-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Export PATH=$(BR_PATH) so that our own mkpasswd is found before
any existing host-system one.
Reported-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A new entry has been added to the "System Configuration" menu to allow
the user to set the location of additional user tables (besides the ones
defined in packages).
A user table is a text file, formatted using the mkusers syntax, which
describes the users on the target system, with their UID/GID, home
directory, password, etc.
The target root file system will be populated according the content of
these files.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[yann.morin.1998@free.fr: use plural TABLES; we need to remove the
intermediate users_table file, as it is no longer generated in
one shot, in case a previous run failed and did not remove it]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: remove BR2_TARGET_ROOTFS_YAFFS_PATH option, rename to yaffs2
instead of yaffs.]
Signed-off-by: Will Wagner <willw@carallon.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thanks to the 2 previous patches of the series, BR_PATH contains
all locations in which host-packages may install programs.
This patch replaces the occurrences TARGET_PATH and HOST_PATH with
BR_PATH, everywhere these variables are used in the *.mk files.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit d1f325f554 (xzcat: treat as host prerequisite and build if
needed) host-xz is always built when the host does not have xz installed.
Removed all other host-xz dependencies.
[Peter: don't drop for host-squashfs, as that needs libxz development files]
Cc: Thomas De Schampheleire <patrickdepinguin+buildroot@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to the "fs/initramfs: fix initramfs support" commit the same
problem applies to iso9660 in a different way. By adding iso9660 to
TARGETS it gets called before target-finalize with obvious consequences.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On commit a24877586a TARGETS_ROOTFS was
introduced, however fs/initramfs/initramfs.mk was never updated, hence a
show-targets would be rootfs-initramfs with rootfs-cpio afterwards hence
never rebuilding the kernel with a proper cpio archive since TARGETS is
always before rootfs-* as stated in the commit description.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be able to use top-level parallel make we must not depend in a rule
on the order of evaluation of the prerequisites, so instead of relyng on
the left to right ordering of evaluation of the prerequisites add an
explicit rule to describe the dependencies.
Add explicit rules to describe the following dependency chain:
$(TARGETS) -> target-finalize -> rootfs-* -> target-post-image
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default, the UBI FS target creates a ubinize configuration
file on-the-fly, for a single volume. Add an option to specify
a custom config file.
E.g., one might want to deploy a system with a volume for the
built ubifs image, a volume for a future upgrade image, and a
volume for user data.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If the Buildroot tree is read-only, then $(TARGET_DIR_WARNING_FILE) is
copied read-only into target/ but we may want to remove it during the
build process.
This poses no real problem, since target/ itself is guaranteed to be
writable, but for good measure, force $(TARGET_DIR_WARNING_FILE) to be
writable itself.
Reported-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using a custom rootfs skeleton, the host-mkpasswd target is not
automatically built, even if some packages add users (i.e. when
PACKAGES_USERS is not empty).
In this case, the rootfs generation may fail because the mkpasswd
provided by some distribution does not support all options used in the
mkusers script.
This patch avoids such trouble by automatically adding the host-mkpasswd
package to the dependency list of the rootfs targets if users needs
to be created.
[Peter: minor rewording of commit message]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: remove now unused BR2_DEPRECATED_SINCE_2010_05 symbol]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to keep better track of when a feature got deprecated, and hence
when it can be removed, a new set of symbols BR2_DEPRECATED_SINCE_xxxx_xx is
introduced. These symbols are automatically selected when BR2_DEPRECATED is
selected, and thus are transparent to the user.
A deprecated feature will no longer depend on BR2_DEPRECATED directly, but
rather on the appropriate BR2_DEPRECATED_SINCE_xxxx_xx. If that symbol does
not yet exist, it has to be created in Config.in.
When removing a deprecated feature, one should also check whether this was
the last feature using the BR2_DEPRECATED_SINCE_xxxx_xx symbol, in which
case the latter can be removed from Config.in.
A followup patch will make sure the overview is added to the list of
deprecated features in the manual, so that a buildroot core developer can
easily determine which features to remove in a given development cycle.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cset 7a58a4e (e2fsprogs: bump to version 1.42.9) broke the generation
of ext4 filesystems.
This is because, in ext4, some metadata are dependent on the UUID.
If changing the UUID of an ext4 filesystem, tune2fs now exits with
exit-code 1, and prints a message to run fsck, to avoid trashing the
filesystem.
This condition is of utmost importance on a mounted filesysten (which
is not our case) to avoid corruption (yes, it is possible to change
the UUID of a mounted filesystem).
But the error is not valid for us, since we are working on an unmonted
filesystem image in the first place.
Since we change the UUID after we convert the filesystem (to ext4),
tune2fs just bails out.
We can not just ignore the exit code of tune2fs, since we still want
to catch any other failure.
It turns out that, changing the UUID before converting the filesystem
is just the way to go.
Fixes#6752.
Reported-by: Daniel Mentz <daniel@exxm.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Daniel Mentz <daniel@exxm.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When Grub is built with splashscreen support, copy the splashscreen
image to the ISO9660 filesystem. Otherwise, disable the splashscreen
in the grub menu.lst file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When using initramfs built into the kernel, it is useless to put an
initrd in the iso image. This patch makes the image to only contain
the kernel image, and also removes the initrd line from menu.lst
Signed-off-by: Thierry Bultel <thierry.bultel@wanadoo.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The fs/iso9660 logic assumes that the Grub bootloader is
used. Therefore, it should make sure that Grub is configured with the
support for the ISO9660 filesystem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The ISO9660-specific Grub menu.lst contains two entries: one entry to
chainload the bootloader available in the first hard drive, and
another entry to boot the Buildroot system.
However, it defaults to booting the first entry, i.e chainloading
what's on the first hard drive. For a Buildroot generated system, this
is quite odd: we're not even booting the system built by Buildroot.
So, switch the two entries, and put the Buildroot boot entry first.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tab instead of spaces
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch lines up the comments of packages that need a Linux kernel to be
built by buildroot, to the format:
foo needs a Linux kernel to be built
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes the following whitespace problems in Config.in files:
- trailing whitespace
- spaces instead of tabs for indentation
- help text not indented with tab + 2 spaces
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adds U-Boot image support for cpio root filesystems. This allows you to
use the bootm command in U-Boot to load the rootfs. It makes it possible to
verify the CRC of the initramfs before booting the kernel.
[Spenser: wrote first version of the patch.]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Previously, a symlink was created to the uncompressed filesystem,
which made it a bit useless in case compression was chosen.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This makes the compression extension available in a variable, so it
can be used by the fs-specific commands. In this patch, it is used
by iso9660. Following patches show more use cases.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This will allow us to remove the unused ROOTFS_$(FSTYPE)_POST_GEN_HOOKS.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When a package A depends on config option B and toolchain option C, then
the comment that is given when C is not fulfilled should also depend on B.
For example:
config BR2_PACKAGE_A
depends on BR2_B
depends on BR2_LARGEFILE
depends on BR2_WCHAR
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
This comment should actually be:
comment "A needs a toolchain w/ largefile, wchar"
depends on BR2_B
depends on !BR2_LARGEFILE || !BR2_WCHAR
or if possible (typically when B is a package config option declared in that
same Config.in file):
if BR2_B
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
[other config options depending on B]
endif
Otherwise, the comment would be visible even though the other dependencies
are not met.
This patch adds such missing dependencies, and changes existing such
dependencies from
depends on BR2_BASE_DEP && !BR2_TOOLCHAIN_USES_GLIBC
to
depends on BR2_BASE_DEP
depends on !BR2_TOOLCHAIN_USES_GLIBC
so that (positive) base dependencies are separate from the (negative)
toolchain dependencies. This strategy makes it easier to write such comments
(because one can simply copy the base dependency from the actual package
config option), but also avoids complex and long boolean expressions.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(untested)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some Config.in(.host) files have constructs like:
config FOO_VERSION
string
default "1.0" if FOO_1_0
default "2.0" if FOO_2_0
default $FOO_CUSTOM_VERSION if FOO_CUSTOM
The dollar sign here is not needed and confusing, so can be removed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Triggered by the 'some comment required here', this patch updates the Config.in
comments for the ubifs filesystem image options. This includes:
- 'erase block' --> 'eraseblock' (following mtd online documentation)
- remove 'UBI' prefix to make options uniform. Sometimes the option is not a
property of UBI but rather of the flash. Also, line up the name of the option
with the help of mkfs.ubifs.
- add help text on all options, referring to the mkfs.ubifs/ubinize options
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make 3.82 no longer sort the result of wildcards (see
http://comments.gmane.org/gmane.comp.gnu.make.bugs/4260). This may break
build reproducibility.
This patch sort results of wildcards to ensure reproducibility.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Initramfs compression does not make much sense for the architectures
that support compressed kernel images because in this case the data
would be compressed twice. This will eventually result in a bigger
kernel image and time overhead when uncompressing it.
The only reason to use compressed initramfs is to reduce memory
usage when the kernel prepares rootfs, and both the unpacked
filesystem and initramfs.cpio are present in the memory.
Buildroot attempts to force GZIP compression for initramfs,
however it doesn't always work because initramfs compression mode
depends on RAM disk compression supported by the kernel.
Thus, CONFIG_INITRAMFS_COMPRESSION_GZIP depends on CONFIG_RD_GZIP.
If CONFIG_RD_GZIP is not set, setting GZIP initramfs compression
will have no effect.
Besides, the kernel also supports other compression methods,
like BZIP2, LZMA, XZ and LZO. Forcing the good old GZIP does not
really make much sense any more.
This removes initramfs compression settings from Buildroot,
so that the default value preset in the kernel config is used,
which is CONFIG_INITRAMFS_COMPRESSION_NONE.
If initramfs compression is still needed, it can be set
in the kernel config (using make linux-menuconfig)
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
