Commit Graph

61 Commits

Author SHA1 Message Date
Gustavo Zacarias
eca77d0429 apply-patches.sh: avoid reversed/already applied patches
Disable reversed/already applied patches fallout from commit
5871b79199
Reverse patches are bad, they may unfix things with version bumps and
just sneak under the radar with pure batch mode.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-09-17 23:07:34 +02:00
Peter Korsgaard
8d22c1bab7 apply-patches.sh: Go back to only warn about unsupported file types
Fixes http://autobuild.buildroot.net/results/868/8687be8ec029486d9c5e2224cde542134f72884b/

The recent (d245fbb41d: apply-patches.sh: detect missing patches)
change to apply-patches.sh causes a number of regressions with packages
using downloadable tarballs of patches (typically from Debian), as
those contain additional files besides just the patches (ChangeLog's,
debian/rules, ..).

This use case is arguably abusing the _PATCH handling, but it used to
work so people might rely on it so go back to only warn about this
instead of erroring out.

At the same time reword the warning message.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-09-16 22:51:40 +02:00
Ralph Siemsen
d245fbb41d apply-patches.sh: detect missing patches
The "patch" command returns an error code only if patches fail
to apply. Therefore the pipleline "cat <patchfile> | patch ..."
does not fail, even if <patchfile> is missing. Fix this by
adding an explicit check for patch file existence.

Based on feedback from buildroot mailing list, also change the
existing check for unsupported patch format into a fatal error.

Signed-off-by: Ralph Siemsen <ralphs@netwinder.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-09-15 22:08:46 +02:00
Jerzy Grzegorek
c403fedbc7 pkg-stats: update set of files to skip
In BR sub-directory boot/ linux/ and package/ there are a few .mk files which
aren't <package>.mk files. These files shouldn't be taken into account
in package statistics.

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-09-11 13:00:58 +02:00
Peter Korsgaard
33699aac06 setlocalversion: sync with Linux kernel version (2.6.34)
Brings a number of fixes, and most importantly no longer tries to figure
out if the tree contains uncommitted changes when using svn, as that can
be very slow.

This only syncs with setlocalversion as of 2.6.34 as later kernel versions
aren't directly compatible with our use cases since 09155120c (kbuild:
Clean up and speed up the localversion logic).

We still have one delta from the kernel version (setlocalversion: fix i18n
issue with svn), as that has only later been fixed in the kernel version.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-09-04 11:58:12 +02:00
Peter Korsgaard
13d917aaff gen-manual-lists.py: fixup after 2440385 (config: reorder top-level menu)
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-08-30 00:29:27 +02:00
Arnout Vandecappelle
5871b79199 apply-patches: run patch in batch mode
If the file to be patched is missing, then `patch' will interactively
ask for a file to be patched. This is annoying in e.g. the autobuilders
because they have to wait for a timeout instead of failing.

Giving the '-t' (batch mode) option to patch fixes this: it will skip the
missing file, and return a non-zero exit code. So the build cleanly
fails.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-08-27 22:28:32 +02:00
Thomas Petazzoni
12d1aa4b69 Remove BR2_HAVE_DEVFILES
This finally removes the BR2_HAVE_DEVFILES option, that was used to
install/keep development files on target. With the recent migration of
the internal backend to the package infrastructure, we had anyway lost
the ability to build gcc for the target, and install the uClibc
development files on the target.

[Peter: also remove support/scripts/copy.sh]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-07-04 09:06:33 +02:00
Peter Korsgaard
15ceab14b4 apply-patches.sh: ensure a fixed (and simple) sorting order is used
So we always apply patches in the samme order.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-06-12 23:01:46 +02:00
Peter Korsgaard
1ba51d2fbd Merge branch 'next' 2013-06-02 16:33:05 +02:00
Tzu-Jung Lee
d67b3a54af skeleton: add default login port to /etc/securetty
We ran into a "Login incorrect" problem when running the same rootfs
image across platforms with different loging ports ttyS0/1/2/3.

Simply assignning "console" to BR2_TARGET_GENERIC_GETTY_PORT, which in
turn modifies the /etc/inittab, is not enough because the "console" device
was missing in the /etc/securetty.

While current securetty has enumerated a lot of ttys, this patch should save
some efforts to enumerate more.

[Peter: guard with single quotes]
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-05-26 23:00:30 +02:00
Danomi Manchego
bfca77e7f7 graph-depends: ignore the 'target-purgelocales' target
Otherwise, graph-depends tries to call 'make target-purgelocales-show-depends',
which does not exist, as 'target-purgelocales' is not an actual package.

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-05-16 13:05:04 +02:00
Luca Ceresoli
13c367f827 graph-depends: fix program path in comment
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-05-15 16:04:48 +02:00
Luca Ceresoli
b193c1264a graph-depends: ignore the 'target-generic-dont-remount-rw' target
The graph-depends script tries to call 'make target-generic-dont-remount-rw',
which doesn't exist since 'target-generic-dont-remount-rw' is not a package.

See also the comments for commit 72bd61e5b8c2094378.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-05-15 16:04:35 +02:00
Samuel Martin
a10041ea9a support/scripts: add gen-manual-lists.py
Script generating the target and host package tables, and the deprecated
stuff list as well. These tables and lists are generated parsing the
Config.in files.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: no leading dot, no menu path for host-utils]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-05-04 12:31:46 +02:00
Samuel Martin
7016cb0445 support: add kconfiglib python module
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: rename readme so it is obvious it's about kconfiglib]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-05-04 12:27:00 +02:00
Yann E. MORIN
1f3af04db7 packages: add ability for packages to create users
Packages that install daemons may need those daemons to run as a non-root,
or an otherwise non-system (eg. 'daemon'), user.

Add infrastructure for packages to create users, by declaring the FOO_USERS
variable that contain a makedev-syntax-like description of the user(s) to
add.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Cam Hutchison <camh@xdna.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-04-25 22:56:42 +02:00
Jerzy Grzegorek
cc0fd417d4 apply-patches.sh: applying xz-ed patches
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
[yann.morin.1998@free.fr: space-damage]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-03-26 23:35:48 +01:00
Thomas Petazzoni
a9ba807c58 graph-depends: ignore the 'target-post-image' target
Since the introduction of the post-image mechanism, the graph-depends
script is broken: it tries to call 'make
target-post-image-show-depends', which doesn't exist since
'target-post-image' is not a package.

So we should simply ignore this 'target-post-image'.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-03-06 21:10:24 +01:00
Thomas Petazzoni
12ccc43fb7 package/customize: remove
This mechanism of root filesystem customization has been deprecated
since a long time, so let's remove it now.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-02-08 22:06:41 +01:00
Thomas Petazzoni
d671715c10 eclipse support: document script and add checks
As requested by Peter, add a bit of documentation in the
eclipse-register-toolchain script, and add a few more checks (even
though this script is not intended to be executed manually, which is
also now mentionned in the documentation).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-01-14 21:45:09 +01:00
Thomas Petazzoni
217ef08a97 Integration with Buildroot Toolchain Eclipse plugin
The Eclipse plugin at
https://github.com/mbats/eclipse-buildroot-toolchain-plugin allows
users of Eclipse to easily use the toolchain available in
Buildroot. To do so, this plugin reads
~/.buildroot-eclipse.toolchains, which contains the list of Buildroot
toolchains available on the system, and then offer those toolchains to
compile Eclipse projects.

In order to interface with this plugin, this commit adds an option
that allows the user to tell whether (s)he wants the Buildroot project
toolchain to be visible under this Eclipse plugin. It simply adds a
line in this ~/.buildroot-eclipse.toolchains file.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-01-14 16:33:30 +01:00
Thomas Petazzoni
d7dde090f4 xorg-release: ignore some X.org packages
Following Gustavo's removal of two X.org drivers for old hardware
unlikely to be used in embedded contexts, the xorg-release script now
reports those two X.org packages as "to be added": they exist in
X.org, but not in Buildroot.

So, we add a small list, XORG_EXCEPTIONS, in our xorg-release script,
to list the X.org packages we don't want to hear about. Of course,
packages that exist in X.org, and that are not part of this exception
list, and are not packaged in Buildroot are still listed as "to be
added".

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-01-05 22:51:30 +01:00
Thomas Petazzoni
8afc3e684e support/scripts: add xorg-release.py script
This script generates a report on the packaging status of X.org
releases in Buildroot. It does so by downloading the list of tarballs
that are part of a given X.org release, and compare that with the
packages that are available in Buildroot.

[Peter: drop .py suffix, make executable]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-01-05 13:45:14 +01:00
Yann E. MORIN
d946a1af93 graph-depends: add to exclusion list
Add the root-password internal target to the exclusion list.

Fixes failures like:
    Getting dependencies for [... 'target-root-passwd' ...]
    Error getting dependencies [... 'target-root-passwd' ...]

Which is easily singled out with:
    $ make target-root-passwd-show-depends
    make[1]: *** No rule to make target `target-root-passwd-show-depends'.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-01-02 22:00:00 +01:00
Thomas Petazzoni
1063539c53 graph-depends: remove support for "unknown" packages
The "unknown" packages mechanism was used to render packages that did
not implement the make <pkg>-show-depends target, i.e the packages
that were not yet converted to one of the package infrastructures.

Since now all packages have been converted, we can remove this
"unknown" packages feature.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-01-02 19:00:04 +01:00
Thomas Petazzoni
58cd46aa04 graph-depends: update copyright
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-01-02 18:59:43 +01:00
Thomas Petazzoni
393d2a7858 graph-depends: fix comment
Since 9bc7b1d4ae, all X.org .mk files
are parsed unconditionally, even if BR2_PACKAGE_XORG7 is disabled.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-01-02 18:59:31 +01:00
Thomas Petazzoni
4359685e14 graph-depends: optimize execution speed
Until now, graph-depends was calling "make <pkg>-show-depends"
individually for eack package, which was very slow. Now, it calls
"make <pkg1>-show-depends <pkg2>-show-depends ... <pkgN>-show-depends"
for all packages it knows, and then does that recursively. It reduces
the number of make invocations to the deepest dependency chain in the
current configuration, instead of having a number of make invocations
equal to the number of enabled packages.

For a configuration with xvkbd enabled (which brings a significant
number of X.org dependencies) and a tar root filesystem, the time to
execute graph-depends was:

real	5m14.944s
user	4m53.590s
sys	0m14.069s

After our optimizations, it is now:

real	0m33.096s
user	0m30.878s
sys	0m1.472s

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-01-02 18:58:24 +01:00
Thomas Petazzoni
41af66ef39 graph-depends: use a separate TARGET_EXCEPTIONS variable
In preparation for more graph-depends improvements, use a
TARGET_EXCEPTIONS list to list all the targets that should be ignored
while building the dependency graph.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-01-02 18:57:51 +01:00
Thomas Petazzoni
2404c0db7f graph-depends: remove redundant dependencies
When doing a full graph of the dependencies, graph-depends starts by
doing a "make show-targets", which lists all the packages registered
in the $(TARGETS) variable. This variable contains all packages that
are enabled according to the .config file. Then, for each of those
packages, we used to create a "all" -> "package" dependency, even if
in fact most of some packages are already dependencies of other
packages. This creates a needlessly complex dependency graph.

This patch modifies graph-depends so that it filters out the unneeded
"all" -> "package" dependencies when "package" is already the
dependency of another package.

For example, if you have a configuration with libpng (which selects
zlib), "make show-targets" displays "libpng zlib", so graph-depends
used to create the following dependencies: (all -> libpng, all ->
zlib, libpng -> zlib). However, the (all -> zlib) dependency is not
really needed, as zlib is already the dependency of libpng. Those
dependencies are now filtered out.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-01-02 18:57:45 +01:00
Luca Ceresoli
f54752b673 pkg-stats: fix the broken "results" link
At the top of the output html page there is a dangling "results" link.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-11-05 09:17:24 +01:00
Yann E. MORIN
a293d4ab33 support/graph-depends: fix out-of-tree usage
graph-depends calls make to get the list of packages, and the
dependencies of each package.

When called out-of-tree, the Makefile is a wrapper that calls
the real Makefile, so make will spit out a line like:
  make -C /path/to/buildroot O=/path/to/build-dir show-targets

which graph-depends wrongly believes is part of the target list.

Be silent when calling make, as we really only want the target
and dependency lists.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-08-14 15:09:21 +02:00
Thomas Petazzoni
58dbdce29e pkg-stats: statistics about license files information
Since on some packages we are adding <pkg>_LICENSE but not necessarily
<pkg>_LICENSE_FILES, let's add a separate statistic to track these
informations. This will allow us to improve both the number of
packages covered by <pkg>_LICENSE and <pkg>_LICENSE_FILES.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-08-05 11:50:10 +02:00
Thomas Petazzoni
f1f580731b pkg-stats: support <pkg>_LICENSE = lines with spaces
For alignement reasons, we sometimes add spaces between <pkg>_LICENSE
and the equal sign. Take this into account in pkg-stats.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-08-05 11:44:52 +02:00
Thomas Petazzoni
697f034f58 pkg-stats: ensure infratype is reset for every package
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-07-31 21:38:16 +02:00
Thomas Petazzoni
1ed1a83f1c pkg-stats: add license information, rework information displayed
Now that most packages have been converted over to package
infrastructures, keep only one column to show the package
infrastructures.

A new column, showing of the package has license information, has been
added. This will help in increasing the number of packages having
license metadata.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-07-31 21:32:25 +02:00
Arnout Vandecappelle (Essensium/Mind)
46fa5cbfb8 Rename XXXTARGETS to xxx-package
With the introduction of a specific macro for host targets, it was decided
to also make the names of the macros more intuitive: generic-package,
autotools-package and cmake-package.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
2012-07-17 20:22:41 +02:00
Arnout Vandecappelle (Essensium/Mind)
c98337911c pkg-infra: add host-xxx-package macro
Create host-generic-package, host-autotools-package and
host-cmake-package macros.  Such a macro is more intuitive to use than
the $(call ...,host) construct.  Also it speeds things up by having
one less $(call ...) evaluation.

Also includes documentation update, but not for buildroot.html.

This brings the time for 'make -qp' (which is used by bash-completion)
down from 1.85s to 1.35s on my laptop.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-07-17 20:17:33 +02:00
Thomas Petazzoni
8278ed43ef graph-depends: ignore a few more uninteresting targets
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2012-07-17 19:44:26 +02:00
Ludovic Desroches
38b1ba3681 apply-patches.sh: add documentation
Signed-off-by: Ludovic Desroches <ludovic.desroches@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-05-19 20:57:55 +02:00
Ludovic Desroches
7c717bbfff apply-patches.sh: patch pattern was expanded prematurely
The patch pattern was expanded before being into the patch directory so the
expansion can add incorrect files.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-04-16 23:19:08 +02:00
Ludovic Desroches
64ac719952 apply-patches.sh: add recursivity when scanning patchdir
Recursivity is needed with some tarballs containing debian patches:
.
  debian
    changelog
    control
    patches
      02-COPYRIGHT.patch
[...]

Since we can find some files which are not patches in those directories, only
consider .patch* and .diff* files as valid patches.
Due to recursivity, strip-components option is no more necessary so it has
been removed.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-03-21 13:47:27 +01:00
Ludovic Desroches
6c29e50c94 apply-patches.sh: use series file to apply patches in proper order
If a series file is present use it to determine the proper order to apply
patches instead of using ls sorting order.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
add a series file with a wrong patch order into an archive containing several
patches whose correct order is the alphabetical one
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-03-21 00:06:26 +01:00
Ludovic Desroches
4f9e82da2a apply-patches.sh: change archive management
The way archives were managed was incorrect because the uncompressed archives
were sent directly to the patch command. It means that alphabetical patch
order was not respected.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
with an armadeus_apf9328_defconfig build
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-03-21 00:04:47 +01:00
Ludovic Desroches
1b58957a96 apply-patches.sh: directories are no more considered as overlays
When a directory is found in patchdir, it is skipped.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
with an armadeus_apf9328_defconfig build
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-03-20 23:52:29 +01:00
Ludovic Desroches
1b671d477b apply-patches.sh: cleanup
Add quoting and remove redundant command.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
with an armadeus_apf9328_defconfig build
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-03-20 23:51:10 +01:00
Ludovic Desroches
a7773ea412 apply-patches.sh: rename targetdir to builddir
targetdir is not the output/target directory as it can suggest.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
with an armadeus_apf9328_defconfig build
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-03-20 23:49:20 +01:00
Ludovic Desroches
39bd61c6f3 apply-patches.sh: remove any rejects before applying patches
[Peter: .rej files might be in subdirs, so just do find .. | xargs rm]
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com>
with an armadeus_apf9328_defconfig build
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-03-14 23:28:57 +01:00
Luca Ceresoli
8661ae32ad pkg-stats: update list of packages to be skipped
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2012-02-26 19:46:58 +01:00