Commit 2eaa6d0f36 (boot/uboot: fix uboot building host tools on x86
architecture) added use of $(PKG_CONFIG_HOST_BINARY), but forgot to add
the corresponding build-ordr dependency.
Add this missing depenency now.
Additionally, the associated test had an explicit host pkgconf enbled in
its configuration. This is superfluous now that uboot properly depends
on host-pkgconf, so drop that from the test.
Note: it hapenned to work, because host-pkgconf, when explicitly enabled
in the configuration, and without per-package directories, would build
before uboot and thus be available. This would fail with PPD, though,
and thus would break for TLPB.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The make all command run the tools/makefile on the process.
This makefile use "pkg-config" command to support static link.
The issue is the use of pkg-config configured for crosscompiling
to build binaries tools for host architecture.
To fix it, I add pkg-config environment variable to configure it for host.
Add a test to avoid future regress on the build of U-boot.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr:
- fix mixed space-TAB indentation
- fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If PER_PACKAGE_DIRECTORIES=Y and using host-make package (because
BR2_FORCE_HOST_BUILD=Y or local make is too old) .stamp_dotconfig
target needs per-package/uboot/host/bin/host-make that doesn't
exist yet.
Add host-make into UBOOT_KCONFIG_DEPENDENCIES.
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
since 2021.01, tools/binman is broken.
tools/binman/control.py imports pkg_resources
the module pkg_resources is supplied by setuptools,
so this new dependency is required.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some RISC-V platforms (such as SiFive HiFive Unleashed) encapsulate
the OpenSBI firmware image inside U-Boot.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds CPE ID information for a significant number of
packages.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When using a custom git or mercurial repository for u-boot the error message
indicating a version had not been provided incorrectly stated that the URL was
missing. Update the error message to indicate that it's the version that's
missing.
Signed-off-by: Garret Kelly <garret.kelly@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add `.stm32` binary format that U-Boot generates for the trusted
configuration of STM32MP platforms.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For consistancy and dependencies between uboot and uboot-tools,
this patch migrates the script creation over in a similar way as
the env image creation.
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Migrating the support for this feature to uboot-tools to gain the
ability to build env files when BR2_TARGET_UBOOT isn't selected.
When _ENVIMAGE_SOURCE is not set, we generate a default environment.
However, this default depends on the U-Boot configuration. Therefore,
this can only be done if uboot itself is built as well, and
host-uboot-tools needs to depend on uboot.
For the same reason, the commands for creating the environment have to
be adapted a little. Take this occasion to drastically simplify them.
Note: This patch creates a circular dependency with uboot until the
similar migration patch is merged for uboot scripts
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
It's easier to locate given format when it's sorted.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-Boot must use $(BR2_MAKE) as it uses a Make feature from v4.0. We
already use $(BR2_MAKE) in the BUILD_CMDS, but the kconfig commands
still uses $(MAKE). Without this fix, building U-Boot with kconfig will
fail with the following cryptic error.
> Makefile:37: *** missing separator. Stop.
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Before now, U-Boot SPL could only load the Platform Management Unit
(PMU) by patching the board-specific pm_cfg_obj.c file into the generic
PMU firmware, but that then requires generating a new PMU firmware for
every board configuration. To fix that, Luca Ceresoli added support to
U-Boot to load the pm_cfg_obj[1].
Like the PMU firmware, we need a way to pass the PMU cfg to U-Boot
during build. U-Boot only accepts the binary format of the cfg, so we
must convert the source file with the tool provided with U-Boot.
[1] https://lucaceresoli.net/zynqmp-uboot-spl-pmufw-cfg-load/
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The HTTPS URL seems to be more reliable and quicker for download than
FTP. FTP may also be a blocked protocol on some sites and in CI/CD
setups.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-Boot versions newer than 2020.01 use Python 3.x instead of Python
2.x in various scripts.
We already had the BR2_TARGET_UBOOT_NEEDS_PYLIBFDT and
BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS options, but depending on the U-Boot
version, we now need to indicate if Python 2.x or Python 3.x should be
used.
In addition, it turns out that some U-Boot configurations need a
Python interpreter, without needing pylibfdt or pyelftools. Some of
our defconfigs were abusing the BR2_TARGET_UBOOT_NEEDS_PYLIBFDT option
to make sure a Python interpreter was built.
To solve this issue, we introduce a choice, that let the users specify
what, if any, host python version is needed. The default is 'no', to
preserve the previous behaviour, unless any of the pylibfdt or the
pyelftools options is enabled, in which case we hide the 'no' option,
and use python 2 by default. This dfault is guaranteed by the order of
options in the choice.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- explicitly make the choice a bool
- make BR2_TARGET_UBOOT_NEEDS_PYTHON a blind option
- introduce the 'no' option in the choice
- reword the commit log accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We can only know the details of the license files for known versions. For
custom, older or newer versions, the license files may change, or may be
moved around.
So, do for U-Boot as was done for ATF, linux, and linux-headers, and only
define the list of license files for the latest version.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Starting with 2020.01, uboot started using the 'undefine' make
directive, which was only introduced with make 4.0.
In the general case, we do not have a way to know if the uboot
selected by the user is older or later than 2020.01, so we have
no way to know before hand if make >= 4.0 is needed or not. As
such, we have no other option than to always require it.
So, use the existing $(BR2_MAKE_HOST_DEPENDENCY) and $(BR2_MAKE),
both of each will ensure that we do use a make that is at least 4.0.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The original UBOOT_FIXUP_LIBFDT_INCLUDE hook only works for u-boot versions
starting from v2017.11.
As older u-boot versions are still in common use today, e.g. in the
ci20_defconfig, extend the hook to cover a wider range of u-boot versions.
The main code change was proposed by Arnout Vandecappelle in [1].
Testing and comment changes were done by Thomas De Schampheleire.
Additional (build) testing done by Yann.
[1] http://lists.busybox.net/pipermail/buildroot/2019-May/251231.html
This was tested with the following defconfigs, that each excercise one
case:
----.-- No defconfig identified
2010.06 'lib/libfdt/', used to be simply 'libfdt' before upstream commit 0de71d507157...
2013.10 ci20_defconfig
2014.04 'srctree' used to be called 'SRCTREE' before upstream commit 01286329b27b27ea...
2017.05 olimex_a13_olinuxino_defconfig
2017.11 scripts/dtc/libfdt only exists since upstream commit c0e032e0090d6541549b19cc...
2018.01 mx6udoo_defconfig
2018.03 core change is equivalent to upstream commit e0d20dc1521e74b82dbd69be53a04884...
2019.10 nanopi_neo_defconfig
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[yann.morin.1998@free.fr: add the build-test results]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add an upstream URL to the help text in Config.in. This
addresses the issue where an incorrect URL is displayed
on the package stats web page.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
It allows you to add the u-boot.itb to the list of U-Boot images that
can be created. Like the others, this one is also copied to the image
folder.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 2c8ff251cb ("boot/uboot: add
option to generate env image from default env"), the possibility of
generating an environment image using the built-in U-Boot environment
as a source was added.
This is meant to happen when the string option
BR2_TARGET_UBOOT_ENVIMAGE_SOURCE is empty, but the original commit
added the Config.in help text to BR2_TARGET_UBOOT_ENVIMAGE, which is a
boolean option, and therefore cannot be empty.
Move the help text to BR2_TARGET_UBOOT_ENVIMAGE_SOURCE, where it
belongs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
U-Boot supports a number of environment variables to pass specific
information. The following patches were submitted in the past to one
some specific Config.in option to pass some of these variables:
- http://patchwork.ozlabs.org/patch/881197/ proposed an option to
pass a custom EXT_DTB= variable
- http://patchwork.ozlabs.org/patch/1018245/ proposed an option to
pass a custom DEVICE_TREE= variable
Instead of adding one Config.in option for each of those variables,
let's provide a generic mechanism to pass arbitrary variables during
U-Boot build step.
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Clemens Gruber <clemens.gruber@pqgruber.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support to extract compiled in default env
via u-boot's get_default_envs script and generate env image from it.
Signed-off-by: Denis Osterland <Denis.Osterland@diehl.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes:
>>> uboot 2019.07 Collecting legal info
ERROR: No hash found for Licenses/gpl-2.0.txt
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rockchip rk3399 SOC based boards require python pyelftools library for
parsing dtb files, so lets add it as uboot dependency.
This commit introduces a new config option
BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS to achieve this.
Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following check-package warning:
boot/uboot/Config.in:185: attributes order: type, default, depends on, select, help (http://nightly.buildroot.org/#_config_files)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rockchip's rk3328 encapsulates the BL31 part of ATP but it needs
image in ELF format. This is extension to
2c4809e608
This commit introduces a BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF variable
to achieve this.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
At kconfig time, dependencies are not built, and therefore host-ccache
is not ready. Due to this, using $(HOSTCC) as the host compiler in
KCONFIG_OPTS does not work: a "make uboot-menuconfig" invocation from
a clean tree with ccache enabled fails.
This commit fixes this by using $(HOSTCC_NOCCACHE). We cannot rely on
the default value of HOSTCC passed by the kconfig-package
infrastructure, because $(UBOOT_MAKE_OPTS) also contains a HOSTCC
definition that would override the one passed by the kconfig-package
infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We already use $(MKIMAGE) instead of $(HOST_DIR)/bin/mkimage in xvisor, linux,
and cpio; use it here too.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As reported by Jeff Wittrock in bug #11396, the U-Boot environment
image checksum is invalid for big endian targets, because the test on
the BR2_ENDIAN Config.in option doesn't take into account that it is
double quoted.
The fix was provided by Jeff himself on bugzilla.
Fixes bug #11396.
Reported-by: Jeff Wittrock <jwittrock@faultrecorder.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When using the legacy buildsystem, the kconfig parser may still be used,
as reported by Thomas:
>>> uboot 2018.09 Configuring
...]
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
YACC scripts/kconfig/zconf.tab.c
bin/sh: 1: bison: not found
ake[3]: *** [scripts/kconfig/zconf.tab.c] Error 127
ake[3]: *** Waiting for unfinished jobs....
LEX scripts/kconfig/zconf.lex.c
bin/sh: 1: flex: not found
However, in that case, the kconfig parser is only generated during the
'configure' step, so we can add bison/flex as standard dependencies.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-Boot fails to build in a GitLab CI context because the kconfig-package
build stage is unable to find bison or flex even though they are
installed in HOST_DIR.
To fix this, set UBOOT_MAKE_ENV so that UBOOT_KCONFIG_MAKE uses the
correct PATH.
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Recent U-Boot no longer ship the flex/bison generated kconfig parser, as
of commit e91610da7c8a9fe42f3e5a75f06c3d1a0cb5f815 (kconfig: re-sync
with Linux 4.17-rc4).
So, add the conditional kconfig dependencies, as we just did for the
kernel.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
