They were differences against Das U-Boot versions 2015.07 and 2015.04.
Generating again helps to apply them with "git am".
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Improve the descriptions of the knobs to install mkimage, mkenvimage,
dumpimage, fw_printenv and fw_setenv.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise BR2_STRIP_xxxx setup is ignored and they are always stripped.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add an option to enable GDB simulator support, so
it can be used to test some no-MMU systems.
Newer GDB Blackfin Simulator need a workaround for in-tree compile.
It doesn't break for older Buildroot supported GDB Blackfin
Simulator.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow multiple file names to be listed in
BR2_TARGET_UBOOT_ENVIMAGE_SOURCE, concatenating them in the order
listed.
This allows the bulk of the environment to be shared across multiple
boards using a common environment file with board-specific values
supplied in a secondary environment source file.
Signed-off-by: Cam Hutchison <camh@xdna.net>
[Thomas: adjust indentation in the .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit ab74e09eb4 renamed the dtc host tool
provided by linux to linux-dtc to avoid clashes with the dtc host tool
provided by host-dtc.
However, external scripting may well rely on the existence of a device tree
compiler as $(HOST_DIR)/usr/bin/dtc, regardless of its source. Changing
these external scripts to use linux-dtc means that the scripts need to be
aware of the buildroot release they are working with, which is not very
nice.
Add a symlink dtc->linux-dtc when no $(HOST_DIR)/usr/bin/dtc is present.
When host-dtc is not enabled, the end result will be dtc and
linux-dtc representing the same thing.
When host-dtc is enabled, either it is build before linux and no symlink
is created at any time, or it is build after linux, and the 'install'
command in host-dtc will overwrite the symlink with a proper dtc. In both
cases, the end result will be dtc and linux-dtc representing a different
thing.
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
They're not necessary and look bad.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Many lines are not correctly wrapped to 72 column width, so rewrap them.
In addition, standardize all instances of ". " to ". ".
Signed-off-by: Martin Kelly <martin@surround.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for EXT4 filesystem.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update U-boot to the 2016.05 version and the kernel to 4.6.
U-boot 2016.05 needs the patch c510f2e436008 ("video: ipu_common: fix build
error") that is already in mainline to fix an IPU build error.
We can remove this patch in the future when we switch to U-boot 2016.07.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2015-8872 - if the third to last entry was written on a FAT12
filesystem with an odd number of clusters, the second to last entry
would be corrupted. This corruption may also lead to invalid memory
accesses when the corrupted entry becomes out of bounds and is used
late.
CVE-2016-4804 - the variable used for storing the FAT size (in bytes)
was an unsigned int. Since the size in sectors read from the BPB was not
sufficiently checked, this could end up being zero after multiplying it
with the sector size while some offsets still stayed excessive.
Ultimately it would cause segfaults when accessing FAT entries for which
no memory was allocated.
Converted package to autotools infra to match upstream.
The install options are now removals, enabled compatibilty symlinks and
exec-prefix set to / to match previous install names/locations.
Accounted for optional udev usage.
Dropped musl compatibility patch since it's upstream.
Add upstream patch to keep sectors a multiple of sectors per track since
it makes mtools cranky.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Free software library that interfaces with selected Z-Wave PC
controllers, allowing anyone to create applications that manipulate and
respond to devices on a Z-Wave network, without requiring in-depth
knowledge of the Z-Wave protocol
[Peter: also pass DOXYGEN=, add _MAKE_OPTS and use for build+install]
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package introduces batman-adv, a kernel module implementation of
the B.A.T.M.A.N. IV and V mesh network routing protocols.
While batman-adv exists in the mainline kernel tree, it can also be
built as an external out-of-tree module. This package adds the
flexibility to chose a more up to date version of the module than exists
in the official tree, and also allows for compilation against kernels
without batman-adv in-tree support.
https://www.open-mesh.org/projects/batman-adv/
Signed-off-by: Christian Stewart <christian@paral.in>
[Thomas:
- remove "default n", since it's the default
- fix indentation of Config.in help text
- license is GPLv2, not just GPL
- remove variable BATMAN_ADV_MAKE_OPTS, name it directly
BATMAN_ADV_MODULE_MAKE_OPTS as this is what is expected by the kernel
module infrastructure.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump batctl to the latest (2016.1) from 2015.1.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Generate a valid configuration for architectures with
FDPIC and BFLT support.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Added upstream commit to fix compilation when zlib is missing.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Removed 0001-cmake-use-the-standard-CMake-flag-to-drive-the-share.patch,
a similar patch was committed upstream:
ea55c8b5c1
Also remove empty line from Config.in.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It may be useful in some scenarios and size growth is marginal at best.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that .py files are globally compiled into .pyc files, we can get
rid of the samba4 specific logic doing this compilation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, each python package (be it the python interpreter package
itself or external python modules) is responsible for compiling its
.py into .pyc files. Unfortunately, this is not ideal as some packages
only install .py files without compiling them into .pyc files. In this
case, if the Buildroot configuration specifies to keep only the .pyc
files, the .py files are removed and lost.
To address this, this commit changes the logic by making the
compilation of .pyc files a global operation: the python interpreter
packages register a target finalize hook that is in charge of
compiling all installed .py files.
The *.pyc generation on a per package basis is disabled in the
python-package infrastructure by passing the "--no-compile" option to
setup.py.
The *.pyc generation for the Python interpreter internal modules is
disabled through --disable-pyc-build configure option.
A small helper script is used to perform the compilation, the purpose
of this script is to abort the compilation process if one of the .py
file cannot be compiled. It has been provided by Samuel Martin and
integrated into this commit.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
[Thomas:
- rework for python 3.5
- integrate Samuel proposal that allows to detect compilation
failures.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit bumpds the version of python-pyftpdlib to fix a
byte-compilation problem occuring with Python 3. The current version of
pyftpdlib contained a file that had mistakenly been added to the
release, and which wasn't Python 3 compliant. The new 1.5.1 version has
been released specifically to address this problem, see:
https://github.com/giampaolo/pyftpdlib/issues/381
Until now, this wasn't causing any problem as a byte-compilation problem
was not a fatal failure. But upcoming commits will make it a fatal
failure, so it needs to be fixed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As suggested by Samuel Martin, this commit adds the option
--no-run-if-empty xargs option to the "find ... | xargs ..." logic used
in the python and python3 target-finalize hooks to remove py/pyc/pyo
files. This ensures that the command doesn't fail if there are no files
matching the pattern.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rebase patch 1 in git format, and rebase patch 2 against 1.6.22.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently even if -pie flag is provided to LD dynamic relocations
won't be created. That in its turn will break U-Boot self-relocation
functionality.
This fix resolves mentioned problem.
Note as of today this is a sort of off-the-tree patch right from
our binutils guy but in coming day similar fix will be applied to
upstream binutils as well.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Closes#8911
When the kernel passes single in the command line, this translates
into an init -s option that is suppose to drop into a shell after
the sysinit and before the runlevel.
So, in busybox this is hardcoded - but, in sysvinit using the
sysinit action for the rcS means that it will always be executed
even when trying to get into single user mode for repair.
This change should run rcS in all of the expected runlevels
1-5 and should achieve the desired result compared to the busybox
and still allow a single user shell to get started as expected
before running rcS.
Signed-off-by: Charles Hardin <ckhardin@exablox.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add basic support for the roseapple pi board, a SBC in a RPI form factor
with an Actions Semiconductor S500 SoC. For details, see:
http://roseapplepi.org/
The vendor kernel unfortunately needs a minor patch to build the XHCI
driver, so include it here.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is the first level bootloader for the Actions Semiconductor S500 SoC,
which is used on boards like Roseapple Pi and LeMaker Guitar.
The bootloader performs basic configuration and chain loads u-boot for
futher setup.
This bootloader is unfortunately only available as a binary blob. It gets
configured for a specific board using a binary (32bit x86) tool based on a
.ini file (somewhat similar to sunxi .fex).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As explained on http://www.gnu.org/prep/ftp.en.html, the network of
GNU mirrors provide a generic address, http://ftpmirror.gnu.org/,
which automatically redirects to an up-to-date and local mirror. This
allows to greatly speed-up downloads, and also reduces the load on the
main GNU server.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
-Og (introduced in GCC 4.8) lets you optimize for debugging experience,
which can be useful for when you want optimized code that is nonetheless
debuggable.
Signed-off-by: Martin Kelly <martin@surround.io>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
