[Peter: adjust patch to do install -m 0644 and not -D]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The init script was expecting the binary to be called tinyhttpd, but httpd
was used. Fix it to install as tinyhttpd as httpd will conflict with other
web servers (E.G. the busybox one).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: misc fixes, make invocation, use install -D]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix two things in the giblib package:
1- fix prefix breakage
- s/STAGING/STAGING_DIR/ (Thomas)
- prefix is .../usr, not .../usr/lib or .../usr/bin
2- fix the configure.ac/Makefile.am breakage
- imlib2 sets IMLIB2_(LIBS|CFLAGS), not IMLIB_(LIBS|CFLAGS)
- autoreconf the package, install missing files
Note that both configure.ac and configure.in are present in the
package, so both are fixed, although only configure.ac is used
(configure.in is the legacy name).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The utmpx defines for when the target systems lacks utmpx is incomplete,
resulting in a build failure, so fix it.
This can be triggered by a uClibc toolchain that lacks UTMPX in the
configuration, or an older (<= 0.9.31) uClibc which lacks the
functionality.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Red Hat versions of perl do not honour the setting of LD_RUN_PATH
without this option. This leads to perl shared objects being installed
without an rpath set which causes problems for target tools when
searching for dependant shared libraries.
Signed-off-by: Will Newton <will.newton@imgtec.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Microperl will build host-microperl and install it into HOST_DIR/usr/bin,
where other packages will pick it up as _CONFIGURE_OPTS / _MAKE_ENV
prepends that to the path.
libxml-parser-perl didn't though, so it would still be built against
the system perl, causing host-intltool to fail when it would use
host-microperl together with libxml-parser-perl if the system perl
isn't compatible with host-microperl.
Fix it by using HOST_CONFIGURE_OPTS and ensuring it is built after
(host-)microperl if enabled.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The MICROPERL_INSTALL_TARGET_CMDS used the following construct in a
for loop:
[ -d $(@D)/lib/$$j ] && cp -af $(@D)/lib/$$j \
$(TARGET_DIR)/$(MICROPERL_MODS_DIR) ; \
[ -f $(@D)/lib/$$i ] && $(INSTALL) -m 0644 -D $(@D)/lib/$$i \
$(TARGET_DIR)/$(MICROPERL_MODS_DIR)/$$i; \
The problem is that when at the last iteration, the second test (-f)
fails, then the whole loop ends with a non-zero error code, and makes
aborts the build. This happens for example if the last Perl modules in
the list is Time::Local, because such modules are taken care of by the
first condition (that copies a complete directory).
By moving to full if statements, we ensure that the return code is
zero even if the condition was false.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As pointed by Sagaert Johan in the mailing list and further testing version
1.6.15 has some issues.
So move to version 1.6.14 which is far more stable and compliant.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make sure that liburcu (and the packages that select it) cannot be
enabled on the architectures that are not supported. At the moment,
only x86, x86-64, PowerPC and ARM are supported.
[Peter: add armeb as well]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
parted correctly depends on util-linux, but fails to select the
libuuid suboption of util-linux, causing the following build failure
if libuuid remains unselected:
checking for uuid_generate in -luuid... no
configure: error: GNU Parted requires libuuid - a part of the util-linux-ng package (but
usually distributed separately in libuuid-devel, uuid-dev or similar)
This can probably be found on your distribution's CD or FTP site or at:
http://userweb.kernel.org/~kzak/util-linux-ng/
Note: originally, libuuid was part of the e2fsprogs package. Later, it
moved to util-linux-ng-2.16, and that package is now the preferred source.
make: *** [/home/test/test/output/build/parted-3.1/.stamp_configured] Error 1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The build of libsigc 2.2.8 fails with gcc 4.6 with the following error
message:
In file included from signal_base.cc:20:0:
../sigc++/signal_base.h:48:11: error: 'size_t' does not name a type In file included from ../sigc++/signal.h:8:0,
The 2.2.9 version was released with a fix for this build problem, so
we directly bump to the latest version 2.2.10, which builds fine under
gcc 4.6.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libatomic_ops build fails on architectures such as MIPS or SuperH that
are not supported. So we make it possible to select the libatomic_ops
package only for the architectures that are known to be supported.
[Peter: add armeb as supported arch]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes the following problem:
checking whether NLS is requested... yes
checking for intltool >= 0.35.0... ./configure: line 12323: intltool-update: command not found
found
configure: error: Your intltool is too old. You need intltool 0.35.0 or later.
make: *** [/home/test/test/output/build/glib-networking-2.30.2/.stamp_configured] Error 1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes the following problem:
atd.o: In function `run_file':
atd.c:(.text+0x35c): undefined reference to `fork'
atd.c:(.text+0x75c): undefined reference to `fork'
daemon.o: In function `daemon_setup':
daemon.c:(.text+0x4bc): undefined reference to `fork'
collect2: ld returned 1 exit status
make[1]: *** [atd] Error 1
make[1]: Leaving directory `/home/test/test/output/build/at-3.1.12'
make: *** [/home/test/test/output/build/at-3.1.12/.stamp_built] Error 2
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes the following build problem:
checking for intltool >= 0.35.0... ./configure: line 17915: intltool-update: command not found
found
configure: error: Your intltool is too old. You need intltool 0.35.0 or later.
make: *** [/home/test/test/output/build/transmission-2.33/.stamp_configured] Error 1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: drop _INSTALL_TARGET = NO as it installs a shared lib]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Software is ancient, upstream is missing and the package hasn't seen any
significant changes since it was added in 2003.
Unless someone steps up to update it (E.G. to gentargets), it will
be removed during the 2012.05 cycle.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This modifies the definition of DOWNLOAD to receive two arguments:
the first one is the full URL of the file to download, whereas the second
(and optional) is the name the file will have once downloaded.
Same thing with the SOURCE_CHECK_WGET and SCP functions.
All calls to these functions have been changed to the shortest form of
the new API, except for toolchains acquisition. Since there is quite a
number of different toolchains this call to DOWNLOAD is better set to the
generic one.
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Stephan Hoffmann <sho@relinux.de>
Downloading Microblaze LE toolchain works on a clean install
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
