Commit 84ba2e8bf5 got the path to
board/friendlyarm/nanopi-neo4/ wrong in the DEVELOPERS file when
adding a new defconfig nanopi_neo4_defconfig. Let's fix the typo.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The layout of the package is not amenable to building both the library
and the utilities at once, so this package will only install the
library.
The other apparmor-related tools however will almost all want to always
link with the static library (it's hard-coded in their Makefiles, like:
AALIB = -Wl,-Bstatic -lapparmor -Wl,-Bdynamic -lpthread), so we also
force the build of the static library.
The kernel headers 3.16 at least are required, for CAP_AUDIT_READ.
We need to force the C standard to gnu99, otherwise:
- autoconf uses wchar_t in C99 test, so considers it to be missing
on toolchains without wchar, but wchar is not otherwise needed for
libapparmor;
- c99 is not enough, otherwise the build fails with errors like:
kernel.c:503:15: error: expected declaration specifiers or ‘...’ before ‘(’ token
extern typeof((__change_hat)) __old_change_hat __attribute__((alias ("__change_hat")));
^
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[yann.morin.1998@free.fr: strip down the patch to only build the lib]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Angelo Compagnucci <angelo@amarulasolutions.com>
This is a duplicate of python-pyasn1.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rhys has asked through private e-mail to be removed:
==
Please can I be removed as the developer, as I’m not longer involved.
Cheers Rhys
==
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Official ALSA Python binding, including hardware management, mixer and
sequencer control.
http://www.alsa-project.org/
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch add support for the low cost QMTECH XC7Z010 starter kit
board [1].
[1] http://www.chinaqmtech.com/xilinx_zynq_soc
Signed-off-by: Martin Chabot <martin.chabot@gmail.com>
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This project is an implementation of the TCG TPM 2.0 specification. It
is based on the TPM specification Parts 3 and 4 source code donated by
Microsoft, with additional files to complete the implementation.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
exFAT filesystem userspace utilities
We need a patch to fix:
error: unknown type name ‘ssize_t’
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The package is separated from the regular libfuse package, as it
contains new API (and can co-exist with libfuse).
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a duplicate of python-pyasn1-modules.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Apcupsd is a UPS control system that permits orderly shutdown of your
computer in the event of a power failure.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A defconfig for the nanopi_neo4 was added in
d1cd9cdf26, but then removed in
8af7b11bd8 because an ARM32 compiler was
needed to build ATF, and this was not supported back then.
Thanks to the addition of package/arm-gnu-a-toolchain/, we can now
re-introduce this defconfig.
Compared to the previous defconfig, the following changes were done:
- enable BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN
- bump kernel to 5.4
- increase default rootfs size to 70M
- use mainline u-boot
- switch to Marek Belisko as maintainer
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig supports the OLPC XO-1 platform.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There are muliple generations of OLPC laptops, x86 ones based on
Geode, VIA and ARM based with Marvell Armada. All of boot with
OpenFirmware and share some peripherals.
This patch adds the common files.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The support for MacchiatoBin board in U-Boot and Linux has been
significantly improved in the past years. So it no longer makes much
sense to have a separate build configuration based on older vendor
Linux kernel and U-Boot. This commit drops the configuration based on
vendor kernel and U-Boot and renames the mainline-based defconfig.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Thomas: add PSF-2.0 to the licenses and LICENSE.PSF to the license files.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Nanopi R1 board with below features:
- U-Boot 2019.01
- Linux 5.0
- Default packages from buildroot
Configuration files taken from Armbian:
https://github.com/armbian/build/blob/master/patch
Signed-off-by: Davide Viti <zinosat@gmail.com>
[Thomas: move U-Boot config and DT to board/friendlyarm/nanopi-r1/uboot/]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
pkcs11-helper is a library that simplifies the interaction with
PKCS#11 providers for end-user applications. Pkcs11-helper allows
using multiple PKCS#11 providers at the same time, enumerating
available token certificates, or selecting a certificate directly by
serialized id, handling card removal and card insert events, handling
card re-insert to a different slot, supporting session expiration and
much more all using a simple API.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Python library for the snappy compression library from Google.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pure Python CBOR (de)serializer with extensive tag support.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A Python implementation of the CANopen standard.
Signed-off-by: Attila Wagner <attila.wagner@onyxinsight.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Upcoming release of kodi 19.0 will add libudfread as optional
dependency: https://github.com/xbmc/xbmc/pull/17612
Please note that the removed support of libudf was added on the master
branch so we do not need to backport udf support to kodi 18.x:
558b54a79e
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr: two spaces in hash files]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Unbound: validating, recursive & caching DNS resolver with
DNSSEC, QNAME minimisation, DNSCrypt and DNS-over-TLS support.
Signed-off-by: Stefan Ott <stefan@ott.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds four new tests for the syslinux bootloader:
- Building on x86, for legacy BIOS
- Building on x86, for EFI BIOS
- Building on x86-64, for legacy BIOS
- Building on x86-64, for EFI BIOS
Runtime testing in Qemu would certainly be possible, but is left as a
future addition to these tests.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Jianhui zhao <zhaojh329@gmail.com>
[Thomas:
- add entry in DEVELOPERS file
- be more explicit with SSL options
- drop logic around luainterpreter since luajit is not properly
detected]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
jbig2dec is a decoder implementation of the JBIG2 image compression format.
Signed-off-by: Raphaël Mélotte <raphael.melotte@essensium.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since spice ver. 0.12.6 doesn't depend on cegui anymore
let's bump to the latest stable version and rename package.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
Linux 5.4
U-Boot 2020.01
Arm Trusted Firmware v2.2
Buildroot default packages.
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A number of AArch64 platforms need to build some bits of ARM32 code,
for example in TF-A (ARM Trusted Firmware) or other
firmware/bootloader.
This package allows to get a pre-built cross-compilation toolchain to
build bare-metal ARM32 code.
https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
[Thomas:
- drop empty LICENSE_FILES
- use VERSION variable in SITE variable
- simplify symlink creation
- drop visible Config.in.host option]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit 25033cfb86.
This perl package is deprecated and gives following recommendations while
building:
*** THIS IS NOT AN ERROR, JUST A MESSAGE FOR YOUR INFORMATION ***
Do you really need Crypt::SSLeay?
Starting with version 6.02 of LWP, https support was unbundled into
LWP::Protocol::https. This module specifies as one of its prerequisites
IO::Socket::SSL which is automatically used by LWP::UserAgent unless
this preference is overridden separately. IO::Socket::SSL is a more
complete implementation, and, crucially, it allows hostname
verification. Crypt::SSLeay does not support this. At this point,
Crypt::SSLeay is maintained to support existing software that already
depends on it.
However, it is possible that your software does not really depend on
Crypt::SSLeay, only on the ability of LWP::UserAgent class to
communicate with sites over SSL/TLS.
If are using version LWP 6.02 or later, and therefore have installed
LWP::Protocol::https and its dependencies, and do not explicitly use
Net::SSL before loading LWP::UserAgent, or override the default socket
class, you are probably using IO::Socket::SSL and do not really need
Crypt::SSLeay.
Before installing Crypt::SSLeay, you may want to try specifying a
dependency on LWP::Protocol::https.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Always use the --disable-dbengine configuration option, because we do
not support libjudy dependency that is required otherwise.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains a single module, which implements
a platform independent file lock in Python, which provides
a simple way of inter-process communication.
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A simple interface to SFTP. The module offers high level
abstractions and task based routines to handle your SFTP
needs.
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
[Thomas:
- add entry in DEVELOPERS file
- add -DRTTY_SSL_SUPPORT=OFF to explicitly disable SSL support
- fix license file name in the hash file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test case runs a simple pipeline for 100 frames to ensure that
gst1-python works properly.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
GStreamer Python binding overrides.
This package also includes a simple upstream patch that fixes building against
python-3.8.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- fix libpython-dir as noticed by Adam
- rewrap a comment
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This package is needed with Freescale i.MX8/i.MX8X defconfigs
version equal to 4.19.35_1.0.0
It is also subject to multi-version support.
The package version aligned with NXP BSP 4.19.35_1.1.0 is 2.3.1
Signed-off-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Reviewed-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The board support package includes the following components:
- U-Boot 2020.01
- Linux 5.4.26
- Buildroot default packages
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds EROFS userspace tool erofs-utils to buildroot,
which can be used to generate EROFS images.
Signed-off-by: Gao Xiang <hsiangkao@aol.com>
[yann.morin.1998@free.fr:
- add explicit --enable-lz4
- explain why autoreconf
- add DEVELOPPER entry
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tinyproxy is a small, efficient HTTP/SSL proxy daemon.
https://tinyproxy.github.io
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This file was created by utils/scancpan while adding other packages but
apparently not yet added in the repo.
Assign this test case to Bernd in the DEVELOPERS file since he is
listed as the maintainer for this package.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added via utils/scancpan, adding a host dependency to perl-try-tiny and
target dependency to openssl.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Dependency for perl-crypt-ssleay (added in a subsequent commit)
Added via utils/scancpan, without changes.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Dependency for perl-crypt-ssleay (added in subsequent commit).
Added via utils/scancpan, without changes.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a dependency for perl-lwp-protocol-https (added in a subsequent
patch).
Added via utils/scancpan, updating license only.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Note: even though the Chart.js developers make specific tarballs on GitHub
(i.e. not simply 'source code' tarballs), they cannot be used in Buildroot
because their names do not encode a version number, e.g. 'Chart.js.zip'.
This means that on upgrades, the same tarball name would have different
contents and thus a different hash.
Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added via utils/scancpan, without changes.
Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added via utils/scancpan, adding README.pod as license file and updating
license to Artistic-2.0.
Note that the license declared in META.{json,yml} ('perl') would mean either
Artistic or GPL-1.0, while the README.pod file only talks about
Artistic-2.0. Assume the author means the latter one.
Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added via utils/scancpan, without changes.
Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added via utils/scancpan, but removing the 'suspicious' dependency on
'host-perl-mojolicious'.
During configuration, the package warns:
Checking prerequisites...
requires:
! Mojo::Base is not installed
build_requires:
! Mojolicious::Lite is not installed
! Test::Mojo is not installed
ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions
of the modules indicated above before proceeding with this installation
Run 'Build installdeps' to install missing prerequisites.
But the build and installation continues correctly nonetheless.
Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added via utils/scancpan, without changes.
Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a dependency of perl-i18n added in a subsequent patch.
Added via utils/scancpan, without changes.
Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Convert the package to a meson package.
- Remove 0001-add-PYTHON_INCLUDES-override.patch as it no longer applies.
- Add gobject-introspection as a dependency.
- Add the package under myself in the DEVELOPERS file.
Because gobject-introspection is now a dependency of python-gobject, the test
must be updated at the same time.
- Change TestPythonPy2Gobject to TestPythonPy3Gobject as
gobject-introspection requires python3.
- Refactor test_python_gobject.py to no longer inherit the
TestPythonPackageBase class, as this class uses a base config that does not
support gobject-introspection.
- Update sample_python_gobject to use Glib to find the path of sh.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Belr is Belledonne Communications' language recognition library, written
in C++11. It parses text inputs formatted according to a language
defined by an ABNF grammar, such as the protocols standardized at IETF.
https://gitlab.linphone.org/BC/public/belr
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Belle-sip is a modern library implementing SIP (RFC 3261) transport,
transaction and dialog layers.
http://www.linphone.org/technical-corner/belle-sip
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: select mbedtls as support for crypto is needed in bctoolbox]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BearSSL is an implementation of the SSL/TLS protocol (RFC 5246) written
in C
https://bearssl.org
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gentoo scripts to initialize udev via openrc, to be used by eudev.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
[yann.morin.1998@free.fr: fix commit title]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
GObject introspection is a middleware layer between C
libraries (using GObject) and language bindings. The C library
can be scanned at compile time and generate a metadata file,
in addition to the actual native C library. Then at runtime,
language bindings can read this metadata and automatically
provide bindings to call into the C library.
There's an XML format called GIR used by GObject-Introspection.
The purpose of it is to provide a standard structure to access the complete
available API that a library or other unit of code exports. It's
language-agnostic using namespaces to separate core, language, or
library-specific functionality.
Cross-compiling gobject-introspection is not an easy task. The main issue is
that in the process of creating the XML files, gobject-introspection must first
run and scan the binary, which, if the binary is cross-compiled, would not
typically be possible from the host system.
Because of this limitation, we use several wrappers to call instead first out
qemu, which runs the native scanner to create the binaries.
There are seven total patches and four different wrapper files needed to
successfully cross-compile and run this package, many of them are from
open-embedded, but one of them is of my own doing.
1) Revert a previous, incomplete attempt at adding cross-compiling support.
2) Add support for cross-compiling with meson.
3) Disable tests.
4) Add an option to use a binary wrapper; this patch will force giscanner to
use a wrapper executable to run binaries it's producing, instead of
attempting to run them from the host.
5) Add an option to use an LDD wrapper, again, useful for cross-compiled
environments.
6) Add a --lib-dirs-envar option to pass to giscanner. (See patch for details.)
7) Add rpath-links to ccompiler: when passing the PACKAGE_GIR_EXTRA_LIBS_PATH
to the ccompiler.py script, ccompiler.py needs to add -Wl,-rpath-link to the
environment for the package to correctly link against the passed on paths.
8) Ignore error return codes from ldd-wrapper because prelink-rtld returns 127
when it can't find a library, which breaks subprocess.check_output().
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr:
- host-prelink-cross has no Kconfig entry
- reorder dependencies for arch deps first
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Prelink-cross emulates a runtime linker for a given sysroot. This is
necessary to allow gobject-introspection to build its typelib files
during cross-compiling.
We're using a sha1 on the cross_prelink branch, as we need the
RTLD-enabled variant of prelink-cross.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- drop HOST_ prefix for inherited variables
- fix licensing info to "or-later"
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some packages, like prelink-cross, want to use libiberty but do not bundle
their own instance (which is good!).
However, libiberty is made for being bundled in packages: all GNU
packages that use libiberty (gcc, Binutils, gdb, et al...) all have their own
bundled variant. This common practice means that there is no official upstream
for libiberty, the closest being as part of the combined Binutils-gdb tree.
So we introduce a new host-only package, that installs just libiberty from a
Binutils released tarball.
Again, as packages usually bundle libiberty, it usually only installs a static
version. Furthermore, it does not obey the usual --enable-shared and
--disable-static flags; it only ever builds a static version.
Furthermore, -fPIC is not used with this library, but some packages may pick it
to build shared objects. This behavior is the case for host-gdb, for example,
which accidentally picks that library instead of its internal one.
So, rather than fix the various gdb versions and variants we can use, we ensure
that the libiberty we install is usable in shared objects, and we always build
before host-gdb.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- fix DL_SUBDIR for a host-only package
- add licensing info
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
openFPGALoader is a tool for programming FPGA.
Signed-off-by: Jean Burgat <jeanburgat33@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The first time I worked on the Buildroot's toolchain infra
was to add support for the Sourcery Codebench Standard
(licenced) edition toolchain (from Mentor Graphics) for
x86 target [1]. The series was rejected though.
But the knowledge gained from this work served to refactor
the toolchain-external infra in Buildroot [2].
Nowadays, I'm using toolchains-builder project to do
some toolchain build testing to keep GNU tools up to date
in Buildroot.
[1] http://lists.busybox.net/pipermail/buildroot/2014-November/112036.html
[2] http://lists.busybox.net/pipermail/buildroot/2016-October/175433.html
[3] https://gitlab.com/kubu93/toolchains-builder/
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gstreamer 0.10 has been deprecated upstream since 2012 and is missing a lot
of features and (security) fixes compared to gstreamer1, so remove it.
All gstreamer-0.10 sub packages depends on gstreamer, so we only need to add
a legacy entry for that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
GLSL Sandbox standalone player allow one to run and render
(most of) nice shaders available online on the
http://glslsandbox.com/ website, but without the need of an
Internet connection, a web browser or any of its
dependencies. Instead, the only requirement of
glslsandbox-player is a working EGL and GLESv2 libraries.
This package is useful for stressing and testing GLES shader
compiler in GPU drivers.
https://github.com/jolivain/glslsandbox-player
Signed-off-by: Julien Olivain <juju@cotds.org>
[Arnout: add dependency on threads and make BUSYBOX_SHOW_OTHERS
conditional]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This also adds the new tests to the gitlab CI configuration.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
elixir is required to build RabbitMQ starting from v3.7
Signed-off-by: Frank Vanbever <frank.vanbever@essensium.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package provides an OpenVPN plugin for network manager.
Signed-off-by: Alex Michel <alex.michel@wiedemann-group.com>
[Peter: add Config.in, DEVELOPERS entry]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BlueZ 4.x is deprecated since a long time (BlueZ 5.x has been released
in 2012) so drop it.
For cwiid, sconeserver and ussp-push, replace bluez_utils by
bluez5_utils. All other packages already support bluez5_utils so just
drop bluez_utils.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Validates an archive can be installed and removed
- Builds an archives that uses postinst and prerm scripts
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The RocksDB library provides a persistent key value store. Keys and
values are arbitrary byte arrays. The keys are ordered within the key
value store according to a user-specified comparator function.
The library is maintained by the Facebook Database Engineering Team, and
is based on LevelDB, by Sanjay Ghemawat and Jeff Dean at Google.
http://rocksdb.org
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also add myself as DEVELOPER, as waf is currently orphan,
and I am the last one to fiddle with it.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The name of the package diverges slightly from upstream to maintain
consistency with other nginx modules already present.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The dependency on !BR2_STATIC_LIBS is due to missing Libs.private in the
libmodconfig pkg-config file making builds that statically link against
libmodsecurity fail.
Lua is disabled due to using the host libraries.
Yajl is disabled as enabling it forces the tests to be built. These tests have a
hard dependency on libmodsecurity.a which is not built when --disable-static is
used in the configuration. There is no flag to disable these tests.
Signed-off-by: Frank Vanbever <frank.vanbever@essensium.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ptm2human is a decoder for trace data outputted by Program
Trace Macrocell (PTM) and Embedded Trace Macrocell (ETMv4).
It deconstructs ID packets and data packets from the
formatter of ARM Coresight ETB, and then translates the
trace data to a human-readable format.
./utils/test-pkg --package ptm2human --all
44 builds, 29 skipped, 0 build failed, 0 legal-info failed
Signed-off-by: Julien Olivain <juju@cotds.org>
[yann.morin.1998@free.fr:
- drop the host variant
- introduce _ARCH_SUPPORTS
- comment why we need autoreconf
- drop spurious empty line
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
His e-mail address is bouncing:
Your message to bachmann@tofwerk.com couldn't be delivered.
bachmann wasn't found at tofwerk.com.
thomas.petazzoni Office 365 bachmann
Action Required Recipient
Unknown To address
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
His e-mail address is bouncing:
----- The following addresses had permanent fatal errors -----
<sbobroff@linux.ibm.com>
(reason: 550 5.1.1 <sbobroff@linux.ibm.com>: Recipient address rejected: User unknown in local recipient table)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove celt051 package as celt has been merged into the IETF Opus codec
and is now obsolete (see http://celt-codec.org/).
The only reverse dependency of celt051 is spice. Opus support on spice
has been added upstream 6 years ago with:
ce9b714137
Spice disabled celt by default since version 0.14.1 and:
72b0d603e1
Spice evens error out, by default, if Opus is missing but not explicitly
disabeld since:
f522473842
This will also fix a static build failure on spice with celt051 and opus.
Fixes:
- http://autobuild.buildroot.org/results/96c786f85d35f33508e9c71778043d16b87f72cd
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: slight rephrasing in legacy help]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A library to abstract stream I/O like serial port, TCP, telnet, UDP,
SSL, IPMI SOL, etc.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Peter: explain why we need to unconditionally pass --with-openssl]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
His e-mail address has been bouncing for quite some time:
From: thomas.petazzoni@bootlin.com To: neumann@teufel.de
212.91.255.190[212.91.255.190] reply 550 5.1.10 RESOLVER.ADR.RecipientNotFound
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the latest commit since there is no release since 1.2 (8 years ago).
While testing with test-pkg, the last build issue was
due to the gcc 4.8.3 compiler missing C++11 feature:
"std::list.erase(const_iterator pos) not implemented" [1]
arm-none-linux-gnueabi/include/c++/4.8.3/bits/vector.tcc:134:5: note:
no known conversion for argument 1 from '__gnu_cxx::__normal_iterator<const alure::Source*, std::vector<alure::Source> >'
to 'std::vector<alure::Source>::iterator {aka __gnu_cxx::__normal_iterator<alure::Source*, std::vector<alure::Source> >}
14beed2a86/src/context.cpp (L1357)
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=57158
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the kernel support for WireGuard getting mainlined, the upstream repo
has been split in a wireguard-tools repo for the userspace tooling and
wireguard-linux-compat for the kernel side (for 3.10+ legacy kernels).
Add a wireguard-linux-compat for the compatibility out-of-tree kernel
module, and update the Config.in.legacy handling to use it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With the kernel support for WireGuard getting mainlined, the upstream repo
has been split in a wireguard-tools repo for the userspace tooling and
wireguard-linux-compat for the kernel side (for 3.10+ legacy kernels).
So rename the package to wireguard-tools, use the new upstream and drop the
kernel module handling.
Also add Config.in.legacy handling for existing users.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Net::Ping is a Perl core module (ie. bundled with perl)
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
MIME::Base64 is a Perl core module (ie. bundled with perl)
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Math::BigInt is a Perl core module (ie. bundled with perl)
This package was never released with BR,
so no need to add an entry in Config.legacy
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Digest::MD5 is a Perl core module (ie. bundled with perl)
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Python dictionary with automatic and arbitrary levels of nestedness.
Signed-off-by: Adam Duskett <aduskett@greenlots.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
erlang-p1-iconv does not exist as a package in buildroot and cause warning
with get-developers :
./utils/get-developers -p erlang-p1-iconv
WARNING: 'package/erlang-p1-iconv/' doesn't match any file
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The hyperv integration services offer convenience features for guest
operating systems running on the microsoft hyperv virtualization
platform. They roughly are for HyperV what openvmtools are for VMWare.
The installed binary names are derived from what seems common in large
distros like RedHat:
linux kernel source name -> installed binary name
hv_vss_daemon -> hypervvssd
hv_kvp_daemon -> hypervkvpd
hv_fcopy_daemon -> hypervfcopyd
Each tool was introduced at different points in the kernel history, so
we need to check each of them.
We provide a single init script that is responsible for starting all
enabled programs. The global status will be the status of the last
program to fail to start, or empty (i.e. success) if they all started
successfuly.
However, we provide one systemd unit per program, because it is not easy
to use a single unit to start (and monitor) more than one executable.
Additionally, we do not provide a template that is filled at tinstall
time either, because it does not gain much (three simple units vs. a
template and some replacement code in the .mk).
Finally, the key-value daemon uses a few helper scripts to get/set the
network config. All are optional (their presence is checked before
running them), but one, hv_set_ifconfig. However, it is not strictly
speaking required either, so we just symlink it to /bin/true to avoid
any warning at runtime. Providing actual helpers is left to the end
user, to adapt to their own environment.
Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
[yann.morin.1998@free.fr:
- aggregate all three tools in a single sub-package
- introduce the main HV option, use a sub-option for each tool
- aggregate the three init scripts into one
- don't install the helpers; symlink the mandatory one
- don't create symlinks for systemd units (systemctl preset-all does
it for us now)
- expand commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
TinySSH is a minimalistic SSH server which implements only a subset of
SSHv2 features.
Might be useful for small systems.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
[yann.morin.1998@free.fr:
- add missing licence file, as noticed by Giulio
- update the version to bring two fixes
- update hash file accordingly (version and licence file)
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Lothar added the beaglebone and beaglebone_qt5 defconfigs, and has
been regularly maintaining them, so it makes sense to have him listed
as a contact for those two defconfigs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Theo added this defconfig in 2016, and is listed as the contact for
the pugixml package, so it probably makes sense to have him listed as
a contact for the beagleboardx15_defconfig as well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Theo Debrouwere <t.debrouwere@televic.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Masahiro is the last person who made significant changes to this
defconfig, so let's add him as a contact for it, so that he receives
notifications of build failures and gets Cc'ed on patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Nicholas was the most recent person to make significant changes to the
galileo_defconfig, so let's add him as a contact for this defconfig,
so that he receives notification of build failures and gets Cc'ed on
patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Nicholas Sielicki <sielicki@yandex.com>
Cc: Ray Kinsella <ray.kinsella@intel.com>
Cc: Padraig James Connolly <padraig.connolly@intel.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Joao added this defconfig a while ago, and is still active
contributing to Buildroot, so let's add him as the contact for this
defconfig, so that he receives build failure notifications and gets
Cc'ed on patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Julien originally added this defconfig in 2017, so let's add him as a
contact for it, so that he receives build failure notifications and is
Cc'ed on patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Julien Grossholtz <julien.grossholtz@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A custom ti version of libgbm for SGX graphics accelerator, required by
the binary libraries of the ti-sgx-um package.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Carlos Santos <unixmania@gmail.com>
[Thomas:
- fix LICENSE variable, as noticed by Yegor
- fix alphabetic ordering in package/Config.in
- add missing select BR2_PACKAGE_LIBDRM in Config.in, and the
corresponding dependencies
- add missing depends on BR2_PACKAGE_HAS_UDEV in Config.in
- use gbm.h as license file, instead of extracting the first 26 lines
of the header file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
FluidR3 is the third release of Frank Wen's pro-quality GM/GS
soundfont. The soundfont has lots of excellent samples, including all
the GM instruments along side with the GS instruments that are
recycled and reprogrammed versions of the GM presets.
This package contains Fluid General Midi (GM) soundfont in soundfont
2.0 (.sf2) format.
This soundfont can be used with a software synthesizer, like
FluidSynth.
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
[yann.morin.1998@free.fr:
- backport the patch from upstream now it'sapplied
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The lockfile package exports a LockFile class which provides a
simple API for locking files. Unlike the Windows
msvcrt.locking function, the fcntl.lockf and flock functions,
and the deprecated posixfile module, the API is identical
across both Unix (including Linux and Mac) and Windows
platforms.
The lock mechanism relies on the atomic nature of the link
(on Unix) and mkdir (on Windows) system calls. An
implementation based on SQLite is also provided, more as a
demonstration of the possibilities it provides than as
production-quality code.
Signed-off-by: Adam Duskett <aduskett@greenlots.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
PBR is a library that injects some useful and sensible default
behaviors into a setuptools run.
Signed-off-by: Adam Duskett <aduskett@greenlots.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
"tio" is a simple TTY terminal application which features a
straightforward commandline interface to easily connect to
TTY devices for basic input/output.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
[Thomas:
- license is GPL-2.0+ (noticed by Baruch)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
CCTZ is a C++ library for translating between absolute
and civil times using the rules of a time zone.
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
FluidSynth is a real-time software synthesizer based on the SoundFont
2 specifications and has reached widespread distribution. FluidSynth
itself does not have a graphical user interface, but due to its
powerful API several applications utilize it and it has even found its
way onto embedded systems and is used in some mobile apps.
http://www.fluidsynth.org/
Signed-off-by: Julien Olivain <juju@cotds.org>
Reviewed-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Louis Aussedat <aussedat.louis@gmail.com>
[yann.morin.1998@free.fr: fix leading spaces in Config.in]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Standard generated with utils/scancpan.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Standard generated with utils/scancpan.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Standard generated with utils/scancpan, manually updating _LICENSE and
adding openssl dependency.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
GitDB allows you to access bare git repositories for reading and
writing. It aims at allowing full access to loose objects as well as
packs with performance and scalability in mind. It operates
exclusively on streams, allowing to handle large objects with a small
memory footprint.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[Thomas: fix license]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Smmap wraps an interface around mmap and tracks the mapped files as
well as the amount of clients who use it. If the system runs out of
resources, or if a memory limit is reached, it will automatically
unload unused maps to allow continued operation.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
PipeWire is a server and user space API to deal with multimedia
pipelines.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Thomas:
- further bump to 0.2.7
- select BR2_PACKAGE_DBUS instead of depending on it]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Distributed tracing instrumentation for asyncio application
with zipkin.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
aiosignal: a list of registered asynchronous callbacks.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A list-like structure which implements
collections.abc.MutableSequence.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mixed sync-async queue to interoperate between asyncio
tasks and classic threads.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mako template renderer for aiohttp.web (http server for
asyncio).
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
SockJS server implementation for aiohttp.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
xdg-dbus-proxy is a filtering proxy for D-Bus connections, which can
be used to limit access to a set of services. Typically it is used in
combination with containers to provide them with access to certain
services running outside the container.
https://github.com/flatpak/xdg-dbus-proxy
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[Peter: license is LGPL-2.1+]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We've been using libyang, sysrepo, libnetconf2 and the Netopeer2 suite
of software for more than two years, so let's make this official.
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This configuration builds a 64bit image for RaspberryPi 4.
Signed-off-by: Arthur Courtel <arthur.courtel@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Add spidermonkey as a dependency.
- Add 0001-make-netgroup-support-optional.patch to allow building on musl.
- Add a runtime dependency on dbus.
- Add --disable-libelongind.
- Add --disable-libsystemd-login.
- Update dependencies for systemd pam support.
- Update dependencies for udisks.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
<daniel.nystrom@timeterminal.se>: host ASPMX.L.GOOGLE.COM[172.217.218.26] said:
550-5.1.1 The email account that you tried to reach does not exist. Please
try 550-5.1.1 double-checking the recipient's email address for typos or
550-5.1.1 unnecessary spaces. Learn more at 550 5.1.1
https://support.google.com/mail/?p=NoSuchUser o14si10209151edi.116 - gsmtp
(in reply to RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since Java 11 (and possibly earlier), OpenJDK now has its own official
repository at hg.openjdk.java.net which is referenced in all OpenJDK
documentation. This patch brings buildroot into line with that
source, reducing the opportunity for code injection, and allowing
consistent patching both across projects and for patches specific to
buildroot environments.
diff -ru shows that the only changes between the downstream and upstream files at
this point in time is the addition of a .hg_archive.txt file, containing:
repo: fd16c54261b32be1aaedd863b7e856801b7f8543
node: 7b6accc7c009304dd2979ea16c1cb15bf749a1fc
branch: default
tag: jdk-12.0.2+10
tag: jdk-12.0.2-ga
This does, however, change the hash for the tar.gz file (but not for the license).
With respect to the concern regarding upstream hash consistency, we have now been
using these archives for just over a year (since OpenJDK 11) and we haven't seen an
archive hash change in that time. This was a vast improvement on the previous
Mercurial forest. /archive is exactly as is sounds. It's an archive that doesn't
change, which is why it effectively negates the need for a "downstream" mirror.
Tests completed successfully (which is not surprising since there are no code changes here):
$ ./support/testing/run-tests -d ./dl/ -k -o test_dir tests.package.test_openjdk.TestOpenJdk
14:35:25 TestOpenJdk Starting
['Hello, World']
['Test: Get JNI Version passed', 'Test: Read Native String Constant passed', 'Test: Write Java String to Native Library passed', 'Test: Write Java Char Array to Native Library passed', 'Test: Write String Member to Native Library passed', 'Test: Set String Member from Native Library passed', 'Test: Execeute Java Function from Native Library passed', 'Test: Instantiate Java Class passed', 'Test: Call Native Library to Set System Time passed']
14:35:46 TestOpenJdk Cleaning up
.
----------------------------------------------------------------------
Ran 1 test in 20.614s
OK
Signed-off-by: Tudor Holton <tudor@tudorholton.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a simple test case that imports the module.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bubblewrap is a sandboxing tool based on kernel namespaces, typically
used as lower-level infastructure by other end-user tools e.g. Flatpak.
https://github.com/containers/bubblewrap
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[Peter: needs mmu and !musl toolchain]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Spidermonkey is Mozilla's JavaScript engine written in C and C++. It is used in
various Mozilla products, including Firefox, and is available under the MPL2.
There are 10 patches currently required to properly cross-compile spidermonkey:
1) allow-newer-autoconf-versions
- Spidermonkey is hardcoded to use Autoconf 2.13, which is from 1999!
The reasoning behind using 2.13 is because newer versions of Autoconf do not
work correctly with the custom m4 macros in the source code.
However: Because we are building just the Spidermonkey engine instead of the
entire Firefox package, newer versions of Autoconf work without issue.
See: See: https://bugzilla.mozilla.org/show_bug.cgi?id=104642
for further explanation.
2) allow-building-in-tree
- By default, spidermonkey must be configured and built out-of-tree, otherwise
the following error occurs:
FATAL ERROR PROCESSING MOZBUILD FILE
==============================
The error occurred while processing the following file or one of the files
it includes:
js/src/shell/moz.build
The error occurred when validating the result of the execution. The reported
error is:
The path specified in LOCAL_INCLUDES is not allowed:
.. (resolved to js/src)
Remove this check, as spidermonkey builds without issue in-tree.
3) allow-unknown-configuration-options
- By default, if an unknown parameter is passed to configure, an error is
raised. Replace the raise with a pass and continue.
Fixes: https://bugzilla.mozilla.org/show_bug.cgi?id=1379540
4) fix-building-with-musl
- The MIPS specific header <sgidefs.h> is not provided by musl.
The Linux kernel headers <asm/sgidefs.h> provide the same definitions.
5) add-riscv-support
- Submitted upstream:
See: https://bugzilla.mozilla.org/show_bug.cgi?id=1318905
6) copy-headers-on-install-instead-of-symlinking
- When installing, instead of linking the headers to the source directory,
copy them.
7) ensure-proper-running-on-64-bit-and-32-bit-be-platforms
- Taken from the Fedora RPM
Applied upstream.
Fixes: https://bugzilla.mozilla.org/show_bug.cgi?id=1488552
8) 0008-save-and-restore-non-volatile-x28-on-ARM64-for-generated-unboxed-obje
- Taken from the Fedora RPM:
Applied upstream.
Fixes: https://bugzilla.mozilla.org/show_bug.cgi?id=1375074
9) save-x28-before-clobbering-it-in-the-regex-compiler
- Taken from the Fedora RPM:
Applied upstream.
Fixes: https://bugzilla.mozilla.org/show_bug.cgi?id=1445907
10) always-use-the-equivalent-year-to-determine-the-time-zone
- Taken from the Fedora RPM:
Applied upstream.
Fixes: https://bugzilla.mozilla.org/show_bug.cgi?id=1415202
Typically, The Firefox source tarball is used to build spidermonkey; however,
this has two disadvantages:
- It's large. The Firefox source tarball is over 250M.
- It requires Autoconf 2.13
Instead, use a tarball with only the Spidermonkey source code in it with a
pre-setup configure file. This tarball reduces the size to 31M and prevents the
Autoconf 2.13 requirement.
Signed-off-by: Adam Duskett <aduskett@greenlots.com>
[Thomas: adjust how the libnspr arch dependency is handled]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Crontab module for reading and writing crontab files and accessing
the system cron automatically and simply using a direct API.
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cpuburn-arm burns CPU cycles to generate as much heat as possible.
Useful for stress testing.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[yann.morin.1998@free.fr:
- fix title (Thomas)
- simplify and rename _ARCH_SUPPORTS (Thomas)
]
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The test starts a simple container with an iperf3 server.
The container is using the tini init system, with a shared rootfs.
An iperf3 client is started from the host to check that the container
is really up and running.
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
[Thomas: fix typo in Config.in, disable installation to staging, both
were noticed by Yann E. Morin]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas: add missing entry to DEVELOPERS file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
uMTP-Responder is a lightweight USB Media Transfer Protocol (MTP)
responder daemon for GNU/Linux.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
[Thomas: license is GPL-3.0+]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The jailhouse package was added in commit
ee4990721c by Carlo Caione, but no entry
in the DEVELOPERS file was added. Let's fix this to ensure we have a
registered maintainer for the Jailhouse package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Carlo Caione <ccaione@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
New package which provides the driver and binary blob libraries for
the STM32MP157 vivante gcnano gpu. The precompiled libraries depend
on wayland and libdrm.
Signed-off-by: Jens Kleintje <scooby22@web.de>
[Thomas:
- add missing dependency on glibc
- add missing dependencies on threads (wayland, libdrm) and !static
(wayland)
- introduce GCNANO_BINARIES_LIB_VERSION,
GCNANO_BINARIES_DRIVER_VERSION and GCNANO_BINARIES_USERLAND_VERSION
variables to simplify code a bit
- greatly simplify the installation, by using more the available
libraries/files. This also avoids the installation of duplicate
release/debug libraries]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A C++ library for interacting with sd-bus and a C++ bindings generator.
The host build produces a code generation tool, sdbus++ while the
target build gives libsdbusplus.
The code generator requires host-python-pyyaml, host-python-inflection,
and host-python-mako. Since it isn't built for the target, the target
build does not require them.
The host package includes a code and documentation generation program,
which is useful for including in a buildroot SDK, even if no target
package needs it, so make it a user-selectable host package.
host-autoconf-archive is added as a dependency since configure.ac
uses the AX_PKG_CHECK_MODULES macro.
Signed-off-by: John Faith <jfaith@impinj.com>
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
[Thomas: use host-python3 when BR2_PACKAGE_PYTHON3=y]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
François has regularly updated this defconfig in the last few years,
so it makes sense to have him as a contact for it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Francois Perrad <francois.perrad@gadz.org>
Acked-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A Fast, Extensible Progress Bar for Python and CLI.
Signed-off-by: Louis Aussedat <aussedat.louis@gmail.com>
[Thomas:
- drop depends on BR2_PACKAGE_PYTHON3
- fix license information]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The upstream Alljoyn project is dead since the AllSeen
Alliance merged with the Open Connectivity Foundation
back in 2016. No other package depends on Alljoyn, so
it can be removed.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
[Peter: fixup legacy option text]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sysrepo is a YANG-based configuration and operational state
data store for Unix/Linux applications. It is a dependency
of Netopeer, a NETCONF server.
Both patches have been merged upstream.
Signed-off-by: Heiko Thiery <heiko.thiery@kontron.com>
[Arnout: fix sysvinit scripts to properly daemonize and to read
/etc/default]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Ogre needs host-swig with pcre support when python interpreter is
present on the target.
Otherwise the build stop with the following message:
"SWIG:7: Error: PCRE regex matching is not available in this SWIG build."
Ogre has been tested using the SampleBrowser binary but some demos
are not working due to missing optional dependencies (nvidia Cg plugin).
See: https://www.ogre3d.org/2019/05/01/ogre3d-1-12-released
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
That is useful and needed for upcoming introducing stm32mp157a-dk1 board.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This new package provides mdevd, a small daemon managing kernel hotplug
events similar to udevd.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
