Commit 94c72087f3 ("module-init-tools: remove package") removed the
module-init-tools package and therefore added the corresponding config
option in Config.in.legacy. However, the commit forgot to add the
"select BR2_LEGACY" that ensures the build cannot proceed until the
user has acknowledged the change (i.e kmod replacing
module-init-tools).
This commit adds this missing "select BR2_LEGACY".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_PACKAGE_QT_JAVASCRIPTCORE option was available to force the
activation or disabling of the JIT compiler in the Qt Javascript
interpreter. However, the JIT compiler is not available for all
architectures, so forcing its activation does not always
work. Moreover, Qt knows by itself for which architectures JIT support
is possible, and will automatically enable it if possible.
Therefore, this option was in fact useless, and causing build problems
when enabled on architectures for which the JIT support was not
available. This commit removes this option and there is no
replacement: Qt will enable JIT at compile time when possible.
Fixes:
http://autobuild.buildroot.org/results/aae/aaeb82753b7654eeca679ded5d0211ceebda3ea2/build-end.loghttp://autobuild.buildroot.org/results/367/3670e4f03ff0ce114c90bd7139243d82c427b52a/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When legacy symbols are selected, the menuconfig shows the explanation for
users, immediately followed by the line "Legacy options removed in 2013.08".
In order to visually keep these apart, we introduce a separator.
Note that a line with all spaces is not correctly shown by menuconfig (the
width will not be kept at 80 characters, so the output is '*** ***').
A dashed line seemed a logical alternative, and with another dashed line on
top, the description becomes a block.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch clarifies the message shown to users in the legacy menu.
It explicitly mentions the need to save the configuration before disabling the
legacy options.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The existing comments in Config.in.legacy are not entirely in-line with
current practice. The comments implies that BR2_LEGACY should not be set when
the conversion from old-to-new symbol can be done automatically using the
appropriate 'select' statements. However, none of the existing legacy options
does it this way. Moreover, I think it's intentional that the user is notified
of the change, so that the removal of the legacy options in later buildroot
versions no longer poses a problem.
Additionally, the comments now describe how to handle string options.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit removes the module-init-tools package and adds the
relevant Config.in.legacy entries to ease the migration for users.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
These 2 symbols were removed when the gcc has been converted to the
Buildroot package infrastructures.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As Arnout noted, we removed the BR2_ARM_OABI option without adding the
corresponding option in Config.in.legacy, so users upgrading to
Buildroot 2013.08 with an OABI configuration would get migrated
automatically to EABI without any warning.
This commit introduces such a legacy option, so that such users would
be explicitly warned about the removal of OABI support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we have a much better way of selecting between the various
VFP versions and capabilities, the BR2_VFP_FLOAT version no longer
makes sense. This commit gets rid of it, and adds the appropriate
Config.in.legacy code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Show the user how old the legacy options are, as a
subtle suggestion for him to update mopre often. ;-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Just introduce the symbol and options in arch generic Config.in.
Append FLAT format link flags to external toolchain wrapper.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The old BR2_PACKAGE_PTHREAD_STUBS option (kept for legacy support) now
selects the BR2_PACKAGE_XLIB_LIBPTHREAD_STUBS option, but this creates
a consistency warning from kconfig, because the new option has
BR2_PACKAGE_XORG7 as a dependency.
Since the old option also had BR2_PACKAGE_XORG7 has a dependency, we
make the legacy config option depend on BR2_PACKAGE_XORG7 to avoid
this warning.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Related to the changed directfb variables for
BR2_PACKAGE_DIRECTFB_DITHER_RGB16 and
BR2_PACKAGE_DIRECTFB_TESTS
adding a legacy check.
[Peter: fix DIRECTB_TESTS typo]
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit converts gdb to the package infrastructure, and therefore
moves it from toolchain/gdb to package/gdb.
The target package is now visible in "Package selection for the
target" => "Debugging, profiling and benchmark". The main option,
"gdb", forcefully selects the "gdbserver" sub-option by
default. Another sub-option, "full debugger" allows to install the
complete gdb on the target. When this option is enabled, then
"gdbserver" is no longer forcefully selected. This ensures that at
least gdbserver or the full debugger gets built/installed, so that the
package is not a no-op.
The host debugger is still enabled through a configuration option in
"Toolchain". It is now visible regardless of the toolchain type (it
used to be hidden for External Toolchains). The configuration options
relative to the host debugger are now in package/gdb/Config.in.host,
similar to how we have package/binutils/Config.in.host.
Since gdb is now a proper package, it is no longer allowed to 'select
BR2_PTHREADS_DEBUG' to ensure thread debugging is available when
needed. Instead, it now 'depends on
BR2_TOOLCHAIN_HAS_THREADS_DEBUG'. This option, in turn, is selected by
the different toolchain backends when appropriate. The
'BR2_TOOLCHAIN_HAS_THREADS_DEBUG_IF_NEEDED' option is removed, since
we no longer need to know when it is allowed to 'select
BR2_PTHREADS_DEBUG'. Also, the 'BR2_PTHREADS_DEBUG' option is moved to
appear right below the thread implementation selection (in the case of
the Buildroot toolchain backend).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Add Faraday FA526/626 as suggested on bug #1291
Note however that these cores are v4 and NOT v4t.
* Make the sa110 & sa1110 cores -> strongarm since they're the same.
* Drop all of the ARM variants lower than v4 including generic, there's
no point in supporting obsolete targets.
* Fix uClibc USE_BX logic, it was always on, this would break the new
FA526/626 support and broke StrongARM since it's a v4 core.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to match the new upstream name, rename the gdisk package to
gptfdisk. We add the relevant legacy configuration options to ensure a
smooth transition for users.
[Peter: fixup Config.in indentation]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This mechanism of root filesystem customization has been deprecated
since a long time, so let's remove it now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This makes sure that the most interesting ones are at the top.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The help text is moved to comments.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_PACKAGE_XSERVER_xorg and BR2_PACKAGE_XSERVER_tinyx options
used to select the style of X.org server to use are not named
consistently with the rest of the Buildroot options (in capital
letters and prefixed with the package name).
Therefore, we rename those options, and we take care to add the old
option names in the BR2_LEGACY infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In upstream X.org releases, pthread-stubs is named libpthread-stubs,
so for consistency reasons, we rename the Buildroot package
accordingly. Also, while we're at it, we add a xlib_ prefix to the
package to match other X.org libraries in Buildroot.
The necessary Config.in.legacy code is added to ensure that users
having .config files using the old configuration option name get a
warning.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We select BR2_PACKAGE_EVTEST automatically. This has only limited use:
when the LEGACY_CHECK menu is disabled in menuconfig (or even oldconfig),
it will also unselect BR2_PACKAGE_EVTEST again. Still, it can serve as a
hint of how to fix things.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As discussed in the BR developer days, we want to be more strict about API
changes in buildroot. I.e., we want to make it less likely that a user's
customizations break down after upgrading buildroot.
A first step is to make sure that the user is warned about API changes.
This patch introduces Makefile.legacy and Config.in.legacy, which will
issue clear error messages for such situations.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
