Now that 7.9 was added and 7.8.x is default we don't want to have a
dozen versions so mark it as deprecated.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we've got 7.9 added default to version 7.8.x
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add gdb version 7.9, and adjust the tarball logic to default to .tar.xz
(for 7.8 & 7.9), fall back to .tar.bz2 for 7.7.x and leave the rest
alone.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now when new shiny tools are released by Synopsys we're ready for
version update in Buildroot again.
More details about arc-2014.12 release are available here:
https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/tag/arc-2014.12
Following patches were removed from GCC since they are a part of release
now:
* 200-size_type_unsigned_int.patch
* 300-ptrdiff_type_int.patch
* 400-call-arc_hazard-before-branch-shortening.patch
* 401-fix-length-attribute-for-casesi_load-pattern.patch
* 402-fix-length-of-instructions-that-are-in-delay-slot-and-needs-to-be-predicated.patch
* 403-update-casesi_compact_jump-instruction-length.patch
But since arc-2014.12 tools are still based on GCC 4.8 following patches
ar still relevant so moving to the new folder to match ARC gcc bump.
* 100-libstdcxx-uclibc-c99.patch
* 910-gcc-poison-system-directories.patch
Binutils are still based on 2.23 so following patch still makes sense:
* 600-poison-system-directories.patch
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit bumps to 7.8.1, and updates the logic to use .tar.xz
tarballs so that it applies to all 7.8.x versions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds an option BR2_PACKAGE_HOST_GDB_PYTHON that allows to
enable Python support in the cross gdb built by Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is no need to name the option "GDB TUI support", since this
option is already visible "below" GDB in menuconfig/xconfig. Naming it
"TUI support" is therefore sufficient.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the default version has changed to 7.7, we can get rid of the
older gdb 7.6 version.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that gdb 7.8 is out, it's time to move to 7.7 as the default
version instead of 7.6.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds support for the 7.8 version of gdb. Note that the
tarball of this version is not available as a .tar.bz2, so we have to
add a special case and download the .tar.xz for this version.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now when new shiny tools are released by Synopsys we're ready for version
update in Buildroot.
Important change in this release is switching to combined "binutils-gdb" repo
in accordance to upstream move.
Following patch now is a part of the most recent relese:
e6ab8cac62
So dropping it.
package/binutils/arc-4.8-R3/0001-arc-Honor-DESTDIR-in-custom-Makefile.patch
Since arc-2014.08 tools are still based on GCC 4.8 following patch is still
relevant so moving to the new folder to matxh ARC gcc bump.
package/gcc/arc-4.8-R3/100-libstdcxx-uclibc-c99.patch ->
package/gcc/arc-2014.08/100-libstdcxx-uclibc-c99.patch
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Seems like I accidently picked v1 instead of v2 from patchwork.
BR2_PACKAGE_NCURSES is for ncurses on the target, not host.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a configuration option to compile host-gdb with the
--enable-tui switch.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We already default to 7.6 for all architectures (except AVR32, ARC and
Microblaze that have their specific versions), and we have added 7.7
recently.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes http://autobuild.buildroot.net/results/3e2/3e2b733758651f7a168832de2d3b34afc171609d/
We recently (dfc3cc23af: gdb: switch to 7.x for Blackfin) moved to the
normal 7.x versions for bfin, but Config.in wasn't updated, causing bfin to
still use the old 6.6a variant (but without the uClibc patch) if the
host-gdb isn't selected, breaking the build.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To prep for powerpc64le, we also disable gdb prior to 7.7.1 on
powerpc64le.
The default gdb on powerpc64le is set to 7.7.
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For some reason, we were keeping gdb version 6.6a specially for
Blackfin. However, it turns out that support for Blackfin was merged
in gdb 7.4 (cross-gdb and gdbserver, not native gdb on the
target). Therefore, we can simply remove the support for version 6.6a
and use 7.5 as the default.
Both 7.4 and 7.5 were built tested, including cross-gdb and gdbserver.
The original reason to switch to 7.x is that 6.6a doesn't build for
Blackfin FLAT, and while it builds for Blackfin FDPIC, it only builds
libiberty.a and does not actually build a cross debugger.
Fixes:
http://autobuild.buildroot.org/results/b47/b47f85553336b7f63ee4ecdf8598374ce4a225a3/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes http://autobuild.buildroot.net/results/858/8580840f6e41f198d2cfc0609e14765dbc2e7322/
kconfig uses the first 'default ... if' line that matches, so ensure the
arch specific ones come before the generic 7.5.1 default, otherwise
arc/microblaze ends up with 7.5.1 instead of their custom version.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gdb versions 7.2.x and 7.3.x have been deprecated since 2013.02 and thus can
be removed in 2014.02.
For legacy handling, version 7.5.x is automatically selected.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This avoids duplication of the version selection between these two files.
Cc: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to keep better track of when a feature got deprecated, and hence
when it can be removed, a new set of symbols BR2_DEPRECATED_SINCE_xxxx_xx is
introduced. These symbols are automatically selected when BR2_DEPRECATED is
selected, and thus are transparent to the user.
A deprecated feature will no longer depend on BR2_DEPRECATED directly, but
rather on the appropriate BR2_DEPRECATED_SINCE_xxxx_xx. If that symbol does
not yet exist, it has to be created in Config.in.
When removing a deprecated feature, one should also check whether this was
the last feature using the BR2_DEPRECATED_SINCE_xxxx_xx symbol, in which
case the latter can be removed from Config.in.
A followup patch will make sure the overview is added to the list of
deprecated features in the manual, so that a buildroot core developer can
easily determine which features to remove in a given development cycle.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The mainline gdb does not yet have AArch64 support at all, so let's
disable it for this platform. The external toolchain provided by
Linaro has gdbserver + cross-gdb, so it already provides what's
necessary to do some debugging.
Fixes
http://autobuild.buildroot.org/results/c330eb75bd2d3e2f002e7a362dd5b08c4fc7fafc/build-end.log.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When an external toolchain is used, and the user has chosen to copy
the external toolchain gdbserver to the target, then we should allow
the user to build a gdbserver and/or a cross-gdb: the ones of the
external toolchain should be used.
The reasoning is that one must use a gdbserver and cross-gdb of
identical versions to be sure that debugging will work properly.
Change suggested by Yann E. Morin.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit converts gdb to the package infrastructure, and therefore
moves it from toolchain/gdb to package/gdb.
The target package is now visible in "Package selection for the
target" => "Debugging, profiling and benchmark". The main option,
"gdb", forcefully selects the "gdbserver" sub-option by
default. Another sub-option, "full debugger" allows to install the
complete gdb on the target. When this option is enabled, then
"gdbserver" is no longer forcefully selected. This ensures that at
least gdbserver or the full debugger gets built/installed, so that the
package is not a no-op.
The host debugger is still enabled through a configuration option in
"Toolchain". It is now visible regardless of the toolchain type (it
used to be hidden for External Toolchains). The configuration options
relative to the host debugger are now in package/gdb/Config.in.host,
similar to how we have package/binutils/Config.in.host.
Since gdb is now a proper package, it is no longer allowed to 'select
BR2_PTHREADS_DEBUG' to ensure thread debugging is available when
needed. Instead, it now 'depends on
BR2_TOOLCHAIN_HAS_THREADS_DEBUG'. This option, in turn, is selected by
the different toolchain backends when appropriate. The
'BR2_TOOLCHAIN_HAS_THREADS_DEBUG_IF_NEEDED' option is removed, since
we no longer need to know when it is allowed to 'select
BR2_PTHREADS_DEBUG'. Also, the 'BR2_PTHREADS_DEBUG' option is moved to
appear right below the thread implementation selection (in the case of
the Buildroot toolchain backend).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
