I left DATACOM and will unlikely have access to the hardware required to
test the package.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit c45394c1b0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current address will soon become invalid so drop it before the
messages start bouncing.
Change-Id: If631cedcaaa55d927d99b18ff299324e9d439cb0
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit c2387c9604)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig was added in October 2016 and was never updated since
then. It currently fails to build because U-Boot is too old and
doesn't build with host-openssl in version 1.1.x.
On February 13, 2019, the original submitter was notified, but didn't
reply, so let's remove the defconfig for this platform.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/165766194
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Here is the list of the changes compared to the removed mongodb 3.3.4
version:
- Remove patch (not applicable anymore)
- Add patch (sent upstream) to fix openssl build with gcc 7 and
-fpermissive
- Remove 32 bits x86 platforms, removed since version 3.4:
https://docs.mongodb.com/manual/installation/#supported-platforms
- Change license: since October 2018, license is SSPL:
- https://www.mongodb.com/community/licensing
- https://jira.mongodb.org/browse/SERVER-38767
- gcc must be at least 5.3 so add a dependency on gcc >= 6
- Add a dependency on host-python-xxx modules:
https://github.com/mongodb/mongo/blob/r4.0.6/docs/building.md
- Use system versions of boost, pcre, snappy, sqlite, yaml-cpp and zlib
instead of embedded mongodb ones
- Add hash for license files
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Configuration contains:
- building tpl, spl and u-boot (forked u-boot repository)
- booting from SD card and network via PXE
- working ethernet, usb and uart
- minimal rootfs with busybox
- ready to flash SD card image
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add tool which allows to setup broadcom bluetooth
device via UART.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: add hash for license file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The qtuio package uses the obsolete qt4 package, which we are about to
remove, so remove qtuio as well.
CC: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The python-pyqt package uses the obsolete qt4 package, which we are about to
remove, so remove python-pyqt as well.
CC: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package adds NXP Layerscape and QoriQ reset config word
(RCW) / pre-bootloader (PBL) generation support.
The RCW is used to setup clocking and IO allocations and then launches
the next stage of boot (usually u-boot).
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
GstShark leverages GStreamers newest instrumentation subsystem by
installing a set of custom hooks to the trace points. A variety of
data analytics are extracted and presented to the user in a graphical,
friendly way.
https://developer.ridgerun.com/wiki/index.php?title=GstSharkhttps://github.com/RidgeRun/gst-shark
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: João Victor Oliveira <jv.oliveirag@gmail.com>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Igor Miranda <igorcmiranda3110@gmail.com>
[Thomas:
- fix package prompt to be gtk1-shark in Config.in
- license is LGPL-2.1+, not LGPL-2.1
- add entry to DEVELOPERS file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A free media server.
Stream your media to devices on your home network.
https://gerbera.io
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas:
- fix S99gerbera to be compliant with the init script pattern
that was recently put in place
- add -l option in init script for logging
- license code is GPL-2.0]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
http://autobuild.buildroot.net/results/afd/afdc598b80356a8301d890232466de421f7779d5/
Luacrypto fails to build with openssl 1.1.x. The package has not seen any
functional changes since it was added in 2013 and has no reverse
dependencies.
The upstream repository (https://github.com/starius/luacrypto) explicitly
states:
this project is deprecated, use luaossl
So remove the package.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Utility for testing pluggable authentication modules (PAM) facility.
While specifically designed to help PAM module authors to test their
modules, that might also be handy for system administrators interested
in building a centralised authentication system using common standards
such as NIS, SASL and LDAP.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Peter: drop spelling fix patch]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This tool is used to send commands to imx6 based hardware using NXP's
UTP protocol.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Vincent Prince <vincent.prince.fr@gmail.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains a set of tools to manipulate RTC devices. They
are written and maintained by the RTC subsystem Linux kernel
maintainer, Alexandre Belloni.
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a package for 'shim', an EFI bootloader for secure
boot chain loading.
While gnu-efi supports 32bit ARM, this is currently broken in shim.
Patches to fix this have been submitted upstream but are not included
here for now.
https://github.com/rhboot/shim/pull/162
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: use BR2_PACKAGE_GNU_EFI_ARCH_SUPPORTS, add separate depends
on to exclude ARM32 build.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds the Entertainment Arts Standard Template Library.
The initial version uses the latest hash so that the aarch64 support
is included vs Buildroot having to apply the aarch64 support patch.
Signed-off-by: Maury Anderson <maury.anderson@rockwellcollins.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- add missing BR2_INSTALL_LIBSTDCPP dependency
- use the github helper instead of the git site method, and adjust
hash consequently
- drop INSTALL_TARGET_CMDS, the default cmake-package implementation
works fine]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Ilya Averyanov <averyanovin@gmail.com>
[Thomas:
- add missing dependencies on expat and zlib
- add missing depends on C++ and dynamic library support, and the
corresponding Config.in comment
- add the missing entry to the DEVELOPERS file
- add the missing hash for the license file
- adjust indentation in the Config.in file
- use --disable-unittest instead of --enable-unittest=no.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
His e-mail address is no longer valid. Sending an e-mail to this
address says (yes, the actual text is in French):
Veuillez prendre note que cette adresse n'est plus valide à la suite du départ de l'employé.
which means:
Please take note that this address is no longer valid following the employee departure.
Therefore, it does not make sense to list Sebastien in our DEVELOPERS
file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Vicente is no longer working at Imgtec, and his e-mail is now
bouncing:
<Vincent.Riera@imgtec.com>: host
mxa-00376f01.gslb.pphosted.com[185.132.180.163] said: 550 5.1.1 User
Unknown (in reply to RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Orangepi Lite2 board with below features:
- U-Boot 2018.09
- Linux 4.19.0-rc8
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Orangepi One Plus board with below features:
- U-Boot 2018.09
- Linux 4.19.0-rc8
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libpagekite is a C implementation of the backend of the PageKite relay
protocol. It allows external access to embedded devices without public
IP address.
There is a bundled version of libev but we prefer to use the global
libev library.
Although the configure script has a --without-openssl option, it
doesn't actually build without openssl.
Patch 0001-configure.ac-fix-handling-of-with.patch is needed because
we want to explicitly pass --with and --without options, even if they
are the default. The way the AC_ARG_WITH macros were used, --with and
--without both had the effect of enabling the option.
Patch 0002-configure.ac-use-AS_HELP_STRING-for-with-openssl.patch is
not needed for Buildroot, but it is part of the same upstream PR and
would generate a conflict for the next patch.
Patch 0003-configure.ac-use-pkg-config-for-openssl.patch is needed to
pass -lz (needed by openssl) in static compilation.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
[Thomas:
- As noticed by Romain Naour, fix the prompt of the package in the
Config.in
- Add entry to DEVELOPERS file
- Drop the dependency on BR2_bfin, since this architecture has been
dropped from Buildroot.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas:
- rename BR2_PACKAGE_NETSURF_FRAMEBUFFER to BR2_PACKAGE_NETSURF_SDL,
and use "sdl" everywhere instead of "framebuffer", since really SDL
can display on something else than the framebuffer
- use a "depends on BR2_PACKAGE_LIBGTK2" instead of a "depends on
BR2_PACKAGE_XORG7 + many other depends on + select
BR2_PACKAGE_LIBGTK2"
- use PKG_CONFIG_HOST_BINARY for the pkg-config path]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Jobs scheduler for managing background task (asyncio).
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Control remote side information.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Security for aiohttp.web.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Server-sent events support for aiohttp.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Sessions for aiohttp.web.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Erico Nunes recently contributed this defconfig, we can safely assume
he is willing to maintain it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Lothar contributed this board not long ago, so let's assume he is
willing to take care of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
His e-mail @rockwellcollins.com is bouncing:
<bryan.brinsko@rockwellcollins.com>: host
mail05.rockwellcollins.com[205.175.227.28] said: 550 #5.1.0 Address
rejected. (in reply to RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This tool allows to verify if the OpenCL environment is set up correctly
and provides information related to the supported OpenCL platforms.
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Valentin Korenblit <valentinkorenblit@gmail.com>
[Thomas:
- use the libopencl virtual package
- add LICENSE to the license files]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A flexible forms validation and rendering library for
Python web development.
https://wtforms.readthedocs.io/
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
