The Blackfin architecture has for a long time been complicated to
maintain, with poor support in upstream binutils/gcc. As of April
2018, the Blackfin architecture has been dropped from the upstream
Linux kernel. Also, the Analog Device engineer who used to be in touch
with the Buildroot community also privately said we should drop the
support for this architecture, which Analog Devices is no longer
using, promoting and maintaining.
The BR2_BINFMT_FLAT_SEP_DATA option becomes unselectable, it will be
removed in a future commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For reproducible builds, SOURCE_DATE_EPOCH will be set to the git commit
date if it is not defined in the environment, but this was done by
explicitly using $(TOPDIR)/.git as the git repository, which would not
give the expected result if Buildroot had been put into a subdirectory
of another repository.
This commit removes that restriction, meaning that the default date will
now be the date of the git commit that contains Makefile, regardless of
what level above Makefile the repository is at. This works because the
current directory when the 'git log' command is executed will always be
the directory containing Makefile (it must be, since TOPDIR is set from
CURDIR).
In general this should be a sensible default, and in cases where a
different date is required SOURCE_DATE_EPOCH can be defined in the
environment before invoking make.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If SOURCE_DATE_EPOCH is not defined it was given a definition that
caused 'git log' to be executed each time the variable is referenced,
which is not very efficient given that the answer cannot change.
This commit moves the definition of BR2_VERSION_GIT_EPOCH after the
inclusion of Makefile.in (so that GIT is defined) and makes it a
simply expanded variable so that it is only evaluated once.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds the support for <pkg>-show-recursive-depends and
<pkg>-show-recursive-rdepends which respectively show the list of all
dependencies or reverse dependencies for a given package. The existing
show-depends and show-rdepends only show the first-level dependencies,
while show-recursive-depends and show-recursive-rdepends show
recursively the dependencies.
It is worth mentioning that while show-recursive-depends really shows
all dependencies, show-recursive-rdepends is a bit limited because the
reverse dependencies of host packages are not properly accounted
for. But that's a limitation that already exists in show-rdepends, and
that cannot easily be solved.
Signed-off-by: George Redivo <george.redivo@datacom.ind.br>
[Thomas:
- split from the patch that was also changing graph-depends
- rename show-rrdepends to show-recursive-rdepends
- add show-recursive-depends
- don't create GRAPHS_DIR.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This was present in Yann's original patch, but got dropped when I rebased
commit 7e9870ce32 (core: introduce intermediate BASE_TARGET_DIR variable) to
fix the Makefile conflicts.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Each of the intermediate, per-rootfs target directories, as well as the
intermediate tarball, can take quite some place, and is mostly a
duplication of what's already in target/. The only delta, if any, would
be the tweaks made by the filesystem image generations, but those tweaks
are most probably only meaningful when seen as root.
We normally do not remove intermediate files, but those can be quite
large, and are not directly usable by, nor accessible to the user.
So, get rid of them once the filesystem has been generated.
This does not need to be done in fakeroot.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
... which for now still points to the base target directory, but this is
a step forward.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Like we do for packages with the PKG variable, set ROOTFS to contain the
upper-case name of the rootfs currently being generated.
This will be useful in later patches, when we need more per-rootfs
variables, like a per-rootfs TARGET_DIR for example.
In Makefiles, per-rule variables trickle down the dependency chain, to
all dependencies of that rule, so we have to stop ROOTFS as soon as
we're not in a rootfs. This means we have to stop it at target-finalize
(which is a dependency of all filesystems), and for each package
individually, since some packages (host or target) can be direct
dependencies of filesystems as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new BASE_TARGET_DIR variable is set in stone to point to the real
location where packages will be installed. Its name is modelled after
its definition: it is located in $(BASE_DIR), and it is named 'target/',
hence BASE_TARGET_DIR.
The already-existing TARGET_DIR variable now simply points to the same
location, except that it is recursively expanded, so that we can later
change it depending on the context.
All locations that really need to reference the existing target/
directory, are changed to use BASE_TARGET_DIR; surprinsigly enough, they
all seem to be located in the main Makefile. :-) The rest is left with
using good-old TARGET_DIR.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If BR2_HOST_DIR is not the default, it can be difficult to find the
host directory (i.e., HOST_DIR always has to be passed explicitly in
addition to the output directory). For example, the Eclipse plugin
assumes that HOST_DIR=BASE_DIR/host.
Create a symlink from $(BASE_DIR)/host to $(HOST_DIR) if it is not the
default. Also remove it in the clean target.
When BR2_HOST_DIR is the default, HOST_DIR_SYMLINK will be empty so
there will be no additional dependency to dirs and nothing to remove
in clean.
Fixes https://bugs.busybox.net/show_bug.cgi?id=10151
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
HOST_DIR is defined twice: once to its default value before .config is
included, and once more to BR2_HOST_DIR after .config is included.
However, the rule that defines the mkdir for HOST_DIR comes between
these two, so it will always use the default definition. Therefore,
if a non-default BR2_HOST_DIR is used, there will be no rule to create
that directory, while the dirs target depends on it.
This happens to work at the moment, because in the dirs target,
$(STAGING_DIR) comes before $(HOST_DIR), so $(HOST_DIR) will be created
implicitly. However, this will fail in top-level parallel builds where
both will be created in parallel.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
After commit 6729050f3a nothing creates
$(HOST_DIR)/share/buildroot anymore, causing sdk to fail with:
/bin/bash: .../output/host/share/buildroot/sdk-location: No such file or directory
Add creation of that directory to the "sdk" build steps itself.
Signed-off-by: Stefan Becker <chemobejk@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that DEPENDENCIES_HOST_PREREQ is no longer used anywhere, we can
kill it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit moves the host-fakedate dependency handling from
DEPENDENCIES_HOST_PREREQ to a proper regular dependency handled by the
package infrastructure.
host-fakedate is added as dependency to all packages, except
host-skeleton, because we depend on it.
In addition, we make sure that host-fakedate does not grow a
dependency on host-{tar,xz,lzip,ccache} to avoid circular
dependencies. host-fakedate does not need any extraction tool and does
not need to build C/C++ code (the source code is just a shell script
available in Buildroot).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As part of the per-package SDK work, we want to avoid having logic
that installs files to the global HOST_DIR, and instead do it inside
packages. One thing that gets installed to the global HOST_DIR is the
minimal "skeleton" that we create in host:
- the "usr" symbolic link for backward compatibility
- the "lib" directory, and its lib64 or lib32 symbolic links
This commit moves this logic to a new host-skeleton package, and makes
all packages (except itself) depend on it.
While at it, use $(Q) instead of @ in the HOST_SKELETON_INSTALL_CMDS.
[Peter: drop host-patchelf reference in commit message]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages really want to use an UTF-8 locale, or they break.
However, there is no guarantee that any given locale is available on a
system. For example,, while most mainstream distros (Debian and
derivatives, Fedora...) do have the generic, language-agnostic C.UTF-8
locale, Gentoo does not provide it.
So, find the first UTF-8 locale available on the system, and take any
that is available. We however do favour using the user-set current
locale, then using the language-agnostic C.UTF-8, and eventually any
random UTF-8 locale.
Note: we only need to enforce LC_ALL, because setting it implies
everything else:
http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap08.html#tag_08_02
"""
1. If the LC_ALL environment variable is defined and is not null,
the value of LC_ALL shall be used.
"""
[Peter: use same regexp as in dependencies.sh]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is recommended that vendor trees store OS release information
in /usr/lib/os-release and that /etc/os-release should be a relative
symlink to /usr/lib/os-release.
For more details, see:
http://0pointer.de/public/systemd-man/os-release.html
[Peter: don't hide command, simplify ln invocation]
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This feature is not used by anyone in the core developpers and makes a
drastic simplification of the pkg-download infrastructure harder.
The future patch will move much of what's in the current pkg-download.mk
file into the dl-wrapper which is a shell script.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This merges the next branch accumulated during the 2017.11 release
cycle back into the master branch.
A few conflicts had to be resolved:
- In the DEVELOPERS file, because Fabrice Fontaine was added as a
developer for libupnp in master, and for libupnp18 in
next. Resolution is simple: add him for both.
- linux/Config.in, because we updated the 4.13.x release used by
default in master, while we moved to 4.14 in next. Resolution: use
4.14.
- package/libupnp/libupnp.hash: a hash for the license file was added
in master, while the package was bumped into next. Resolution: keep
the hash for the license file, and keep the hash for the newest
version of libupnp.
- package/linux-headers/Config.in.host: default version of the kernel
headers for 4.13 was bumped to the latest 4.13.x in master, but was
changed to 4.14 in next. Resolution: use 4.14.
- package/samba4/: samba was bumped to 4.6.11 in master for security
reasons, but was bumped to 4.7.3 in next. Resolution: keep 4.7.3.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, enabling more than one filesystem image will make
'show-targets' list a few host packages more than once.
This is because all filesystem images add the same set of
host-packages to their dependencies, which are then added as-is
to the package list.
Thus, host-fakeroot, host-makedevs and, if needed, host-mkpasswd will
appear as many times as there are filesystem images enabled.
Fix that by sorting the package list, thus eliminating duplicates from
that list. Also sort the rootfs list for good measure. Sort the two
separately, so that rootfses are last.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we do nothing about packages that touch the same file: given
a specific configuration, the result is reproducible (even though it
might not be what the user expected) because the build order is
guaranteed.
However, when we later introduce top-level parallel build, we will no
longer be able to guarantee a build order, by the mere way of it being
parallel. Reconciliating all those modified files will be impossible to
do automatically. The only way will be to refuse such situations.
As a preliminary step, introduce a helper script that detects files that
are being moified by two or more packages, and reports them and the
impacted packages, at the end of the build.
The list being reported at the end of the build will make it prominently
visible in autobuilder results, so we can assess the problem, if any.
Later on, calling that helper script can be done right after the package
installation step, to bail out early.
Thanks Arnout for the pythonist way to write default dictionaries! ;-)
Note: doing it in python rather than a shell script is impressively
faster: where the shell script takes ~1.2s on a minimalist build, the
python script only takes ~0.015s, that is about 80 times faster.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Peter Seiderer <ps.report@gmx.net>
[Thomas: rename script without .py extension.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 'include' directive in GNU make supports wildcards, but their
expansion has no defined sort order (GLOB_NOSORT is passed to glob()).
Usually this doesn't matter. However, there is at least one case where
it does make a difference: toolchain/*/*.mk includes both the
definitions of the external toolchain packages and
pkg-toolchain-external.mk, but pkg-toolchain-external.mk must be
included first.
For predictability, use ordered 'include $(sort $(wildcard ...))'
instead of unordered direct 'include */*.mk' everywhere.
Fixes [1] reported by Petr Vorel:
make: *** No rule to make target 'toolchain-external-custom', needed by '.../build/toolchain-external/.stamp_configured'. Stop.
[1] http://lists.busybox.net/pipermail/buildroot/2017-November/206969.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Petr Vorel <petr.vorel@gmail.com>
[Arnout: also sort the one remaining include, of the external docs]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
SOURCE_DATE_EPOCH is currently forcibly set (to either the git commit
date, or the last release date).
However, the spec mandates that it should not be modified if already
set: https://reproducible-builds.org/specs/source-date-epoch/
Build systems MUST NOT overwrite this variable for child
processes to consume if it is already present.
Abide by the rule, and only set it if not already set.
This will allow users to pass it from an upper-layer buildsystem (e.g. a
jenkins or gitlab-ci job, for example), when they have a reson to do so.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Reported-by: Einar Jón Gunnarsson <tolvupostur@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Einar Jón Gunnarsson <tolvupostur@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
That way packages included in that list like ccache will also be
regarded as a normal packages for targets like external-deps,
show-targets or legal-info
Signed-off-by: Alfredo Alvarez Fernandez <alfredo.alvarez_fernandez@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
It is used by Kconfig's merge_config.sh.
No alldefpackageconfig is added, since it's rather pointless: it would
only enable busybox.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rules for the *config targets are all very similar, so factor them
together using $@.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some macros, soon some variables, currently defined in the skeleton are
going to be used by other packages.
Some of those variables will be used as Makefile conditions (e.g. in
ifeq() conditions), so they *must* be defined before being used.
Since the skeleton package, starting with an 's', is included quite
late, those variables would not be available to most packages.
Offload the existing macros into the new system/system.mk file, that is
included early, before any package is. Rename the macros to appropriate
names.
Future commits will add new macros and variables in that file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We use a separate make target to build a relocatable SDK. We first
sanitize the RPATH in host tree. Next we also sanitize the
staging tree. Therefore "sdk" must depend on world.
Sanitizing staging is not really needed, in the sense that any rpath
in there is simply not going to be used. We want to sanitize staging
for the following reasons:
- To avoid leaking references to the original output directory. This
way, we can validate that the SDK is relocatable by running a simple
"grep -r ${BASE_DIR} ${HOST_DIR}". Obviously RPATH sanitization is
not sufficient (e.g. also the references to source files have to be
stripped), but it's a step in the right direction. This reason is
obviously only relevant for the SDK.
- To make sure that when an executable is copied to target that it
actually executes correctly. Since within Buildroot we never copy
stuff from staging to target, this is clearly only relevant for
the SDK.
Finally we install the script "relocate-sdk.sh" into the top directory
of the SDK (HOST_DIR) and the SDK location path is stored in the file
"HOST_DIR/share/buildroot/sdk-location"-
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We sanitize the RPATH of ELF files in the target tree to deal
with stupid packages that don't correctly use --prefix/DESTDIR
and that end up putting the full absolute build-time directory
in the RPATH.
We do it before copying the overlay and calling the post-build
script. The user is completely responsible for what happens
in the last two steps, and it should never be touched by us.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Up to now we created the $(HOST_DIR)/usr compatibility symlink as part
of the creation of $(HOST_DIR) itself. However, when the user specifies
a custom BR2_HOST_DIR, it is possible that the directory already exists
so this rule will never trigger.
Therefore, add an explicit rule for creating $(HOST_DIR)/usr and add
this rule to the dependencies of the dirs target. HOST_DIR itself goes
back to the standard rule for directories. The order-only dependency of
STAGING_DIR isn't needed any more either: HOST_DIR is implicitly
created if needed by mkdir -p, and we don't need to trigger the
HOST_DIR rule any more if the directory already exists.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This silences the annoying warning that there is no hash file for our
own COPYING file.
Also change the message so that it is more obvious what we're doing.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/bin' | xargs sed -i 's%$(HOST_DIR)/usr/bin%$(HOST_DIR)/bin%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now $(HOST_DIR)/usr is a symlink to $(HOST_DIR), it makes no sense to
still have it in BR_PATH.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently use $(HOST_DIR)/usr as the prefix for host packages. That
has a few disadvantages:
- There are some things installed in $(HOST_DIR)/etc and
$(HOST_DIR)/sbin, which is inconsistent.
- To pack a buildroot-built toolchain into a tarball for use as an
external toolchain, you have to pack output/host/usr instead of the
more obvious output/host.
- Because of the above, the internal toolchain wrapper breaks which
forces us to work around it (call the actual toolchain executable
directly). This is OK for us, but when used in another build system,
that's a problem.
- Paths are four characters longer.
To allow us to gradually eliminate $(HOST_DIR)/usr while building
packages, replace it with a symlink to .
The symlinks from $(HOST_DIR)/usr/$(GNU_TARGET_NAME) and
$(HOST_DIR)/usr/lib that were added previously are removed again.
Note that the symlink creation will break when $(HOST_DIR)/usr
already exists as a directory, i.e. when rebuilding in an existing
output directory. This is necessary: if we don't break it now, the
following commits (which remove the usr part from various variables)
_will_ break it.
At the same time as creating this symlink, we have to update the
external toolchain wrapper and the external toolchain symlinks to go
one directory less up. Indeed, $(HOST_DIR) is one level less up than
it was before.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
