When updating to libglib2 2.62.0, the file 0002-add-option-to-build-tests.patch
had to be refactored to work with the new build_tests checks. In the process of
refactoring, a missing check was overlooked in glib/meson.build causing
distributions with older versions of objcopy to fail because the older version
does not contain the --add-symbol argument.
Adding the check for the build_tests argument fixes the issue.
Fixes:
http://autobuild.buildroot.net/results/dcc2352a036aba9650eae8abaaa23819fc67332d
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
match.o: In function `SetMatchSpec':
match.c:(.text+0x9c): undefined reference to `re_comp'
match.o: In function `Match':
match.c:(.text+0xca): undefined reference to `re_exec'
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Remove second patch (already in version)
- Fix a missing error detection in ECJPAKE. This could have caused a
predictable shared secret if a hardware accelerator failed and the
other side of the key exchange had a similar bug.
- When writing a private EC key, use a constant size for the private
value, as specified in RFC 5915. Previously, the value was written as
an ASN.1 INTEGER, which caused the size of the key to leak about 1 bit
of information on average and could cause the value to be 1 byte too
large for the output buffer.
- The deterministic ECDSA calculation reused the scheme's HMAC-DRBG to
implement blinding. Because of this for the same key and message the
same blinding value was generated. This reduced the effectiveness of
the countermeasure and leaked information about the private key
through side channels. Reported by Jack Lloyd.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Change NILFS_UTILS_SITE to https://nilfs.sourceforge.io as this is the
official site with the official tarballs
- Remove first and third patch (already in version)
- Drop fourth patch and host-pkgconf from dependencies, not needed since
d5ce780856
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Remove all patches except first one (already in version)
- Update first patch
- Fix CVE-2019-6471: A race condition when discarding malformed packets
can cause BIND to exit with an assertion failure
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update to the latest version of libcamera, including a fix for toolchains
which require libatomic to be linked manually.
The patch which handles this locally is therefore removed.
Since the last version update, the option to disable building of the
unit tests has been renamed from '-Dtests=' to '-Dtest='
This is updated accordingly.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a new major release which brings in many improvements and new
features. For a complete list, please refer to the release notes:
https://webkitgtk.org/2019/09/09/webkitgtk2.26.0-released.html
A small patch is added which fixes a build failure when X11 headers
are not available (for example, when building a Wayland-only system)
The new support for the WPE renderer on Wayland and the new Bubblewrap
sandbox need additional dependencies and therefore are explicitly
disabled at the moment.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch sets the default floating point ABI based on the ISA
extensions that have been selected rather than defaulting to soft
float.
For 64-bit:
ISA 'D' selects lp64d
ISA 'F' selects lp64f
Otherwise select lp64
For 32-bit:
ISA 'D' selects ilp32d
ISA 'F' selects ilp32f
Otherwise select ilp32
This change was proposed by Palmer Dabbelt at SiFive.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
I am exclusively using my Gmail address for now on. Reflect this in
the DEVELOPERS file.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mathieu is no longer working at Savoir-faire Linux, update his email
address in the DEVELOPERS file.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following check-package warning:
package/libglib2/libglib2.mk:90: consecutive empty lines
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
New upstream at github. Update homepage link and download site.
Drop the custom extract command; we now get the source tree from github.
Drop patch #2; the code detects rpc support.
Add optional dependency on libtirpc.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes a security issue. From the annoncement:
A vulnerability exists in Mosquitto versions 1.5 to 1.6.5 inclusive.
If a client sends a SUBSCRIBE packet containing a topic that consists of
approximately 65400 or more '/' characters, i.e. the topic hierarchy
separator, then a stack overflow will occur.
The issue is fixed in Mosquitto 1.6.6 and 1.5.9. Patches for older versions
are available at https://mosquitto.org/files/cve/2019-hier
The fix addresses the problem by restricting the allowed number of topic
hierarchy levels to 200. An alternative fix is to increase the size of the
stack by a small amount.
https://mosquitto.org/blog/2019/09/version-1-6-6-released/
Also notice that 1.6.5 silently fixed a security issue:
CVE-2019-11778
A vulnerability exists in Mosquitto version 1.6 to 1.6.4 inclusive, known as CVE-2019-11778
If an MQTT v5 client connects to Mosquitto, sets a last will and testament,
sets a will delay interval, sets a session expiry interval, and the will
delay interval is set longer than the session expiry interval, then a use
after free error occurs, which has the potential to cause a crash in some
situations.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This would normally be enabled by systemctl preset-all however since we
don't have a host systemctl we need to enable the service manually.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Remove all patches except first one (already in version)
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Keep listing the test infra so the developer is included in reviews, but
trim the list of tests to those the developer are most interested in.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
MANIFEST may contains line like this:
"LICENSE LICENSE file (added by Distar)"
so, retains only the first word.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
http://autobuild.buildroot.net/results/a6247b95f1578fe1daec485589582310c75b5d84/
luksmeta-v9 generates man pages at build if a2x is available since:
commit 3fa51bb22350fee101fc52044949f6eb394114ae
Author: Daniel Kopeček <dkopecek@redhat.com>
Date: Fri Jul 13 01:52:45 2018 +0200
Generate manual page from source during build time
If a2x (asciidoc) is not available during configure time,
a warning will be generated and the manual page wont be
generated nor installed.
Man pages are not needed on target and the build step fails in certain
setups, so disable it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add hash for license file, and drop 'v' from version for compatibility with
release-monitoring.org.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Includes a number of post-0.12.2 fixes, including a python 3.7 compatibility
fix:
https://github.com/kvesteri/validators/blob/master/CHANGES.rst
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The JSON::PP Perl module is used at build time by the webkitgtk and
wpewebkit packages.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The project now ships a proper LICENSE file, with the complete license
text, so we use it instead of the README file. The license remains the
same as Perl, i.e Artistic license or GPL-1.0+.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The license file hash has changed, due to changes in the installation
instructions.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The copyright year in the LICENSE file was changed, which explains why
the hash is modified:
-This software is Copyright (c) 2000 - 2017 by David Rolsky.
+This software is Copyright (c) 2000 - 2019 by David Rolsky.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Remove patch (already in version)
- Change FIO_SITE to http://brick.kernel.dk/snaps to remove 'fio-'
prefix from FIO_VERSION to match what is given by
release-monitoring.org
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also:
Select PYTHON_SSL or PYTHON3_SSL as pip connects to https://pypi.org
making SSL mandatory for runtime.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libglib2 needs util-linux only for libmount, which is a configuration option.
Instead, check if util-linux-libmount is selected, and if so, set the option
to true.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Refactor 0002-add-option-to-build-tests.patch to work with the new version.
- Add the new option oss_fuzz=disabled to HOST_LIBGLIB2_CONF_OPTS and
LIBGLIB2_CONF_OPTS.
- Change -Diconv=gnu to -Diconv=external as the option has changed.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to latest syslog-ng version.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security vulnerabilities:
- ECDSA remote timing attack (CVE-2019-1547)
Severity: Low
- Fork Protection (CVE-2019-1549)
Severity: Low
- Padding Oracle in PKCS7_dataDecode and CMS_decrypt_set1_pkey (CVE-2019-1563)
Severity: Low
For more details, see the advisory:
https://www.openssl.org/news/secadv/20190910.txt
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In the SYSV init script allow /etc/default/vmtoolsd to override $ARGS
(if it present)
Signed-off-by: Simon Rowe <simon.rowe@citrix.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
