It's no longer used so farewell.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove BR2_INET_IPV6 select for predefined external toolchains.
Remove the (non)IPv6 option prompt since it's now mandatory.
And force the toolchain check now that internal uclibc is always built
with IPv6 support and external non-IPv6 toolchains are disallowed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Normally we'd deprecate them, but:
1) They don't support IPv6 and it's being removed so it makes no sense.
2) They're based on uClibc 0.9.30-ish which is very old and surely has
package build breakage all over it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For a multi-arch toolchain, gconv modules are in a sub-directory named
after the machine gcc targets. This is the case, for example, for the
Linaro ARM 2014.09 toolchain, which has the gconv modules in (relative
to the sysroot):
/usr/lib/arm-linux-gnueabihf/gconv
while the Sourcery CodeBench ARM 2014.05 (non-multi-arch) has them in:
/usr/lib/gconv
So, to catter for both cases, search both paths. We want to favour the
machine-specific gconv modules over potentially existing "generic" ones,
so we first search that (if it exists) and fallback to looking in the
generic location.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's required in some 32-bit architectures for the extended (64-bit)
atomic operations, like __sync_add_and_fetch_8.
These arches are at least: i386, mips & mipsel.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Distro toolchains, i.ie. toolchains coing with distributions, will
almost invariably be unsuitable for use with Buildroot:
- they are mostly non-relocatable;
- their sysroot is tainted with a lot of extra libraries.
Especially, the toolchains coming with Ubuntu (really, all the Debian
familly of distros) are configured with --sysroot=/ which makes them
non-relocatable, and they already contain quite some libraries that
conflict (in any combination of version, API or ABI) with what Buildroot
wants to build (i.e. extra libraries, some not even present in
Buildroot...) but also their mere preence when Buildroot does not expect
them to be already built (so that a package would enable features when
it should not).
So, try to detect those toolchains and black-list them; inform the user
that the toolchain is unusable for the reasons mentioned above.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's now unused so remove it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There's no need for toolchains or the user to declare largefile support
since it's now mandatory.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This will allow us to remove largefile handling in the tree without
breaking things while doing so.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As discussed on the mailing list drop the non-largefile option for
toolchains.
The size delta is minimal and it just complicates package dependencies.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently only check that the Buildroot configuration matches what is
available in the toolchain.
Since we're going to remove the check for LFS and make it a mandatory
feature, we will lose the corresponding buildroot option, so we won't be
able to use check_uclibc_feature as-is.
Introduce a magic value passed as the buildroot option name to recognise
checks for mandatory uclibc options that do not have a corresponding
option in buildroot.
If the buildroot option name is empty then the check is against a
mandatory uclibc option.
If a mandatory uclibc option is missing we reject the toolchain as being
unusable by buildroot.
[Thomas: minor tweaks in comment, remove space instead of tab.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The SuperH architecture is supported by the musl libc since some time
now, so let's enable it.
Tested via qemu_sh4_r2d_defconfig.
Signed-off-by: Lionel Orry <lionel.orry@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
musl 1.1.7 brings in experimental aarch64 support so enable it.
Tested via qemu_aarch64_virt_defconfig.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The internal toolchain was a "best effort" approach - we strived to make
it build properly and all but it's mostly untested.
Since it's got issues disable it until it's properly fixed and tested
and leave the official ADI toolchain instead.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this change we add pre-built external toolachins for DesignWare ARC
cores. All currently existed flavours are supported:
* ARC 700 and ARC HS cores
* Little- and big-endian configurations
These pre-built tools are built with build scripts available here
(https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/tree/arc-2014.12)
and correspond to arc-2014.12 release of sources.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
The computation of TOOLCHAIN_EXTERNAL_BIN has a special case for
Blackfin, where it's set to
$(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/$(TOOLCHAIN_EXTERNAL_PREFIX)/bin
instead of $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/bin for other
architectures.
However, this is actually only true for Analog Devices pre-built
toolchains. Other Blackfin external toolchains (such as ones built by
Buildroot) do not have this special organization.
Therefore, in order to make those non-ADI Blackfin toolchains work, we
need to change the condition from BR2_bfin to testing specifically for
the ADI toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The recommended form is without the trailing slash. Buildroot will add a slash
between FOO_SITE and FOO_SOURCE as appropriate.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a new option BR2_GCC_ENABLE_LTO that builds gcc and binutils with
LTO support.
Individual packages still have to enable LTO explicitly by passing '-flto' to
GCC, which passes it on to the linker. This option does not add that flag
globally. Some packages detect if the compiler supports LTO and enable the flag
if it does.
To support LTO, ar and ranlib must be called with an argument which triggers the
usage of the LTO plugin. Since GCC doesn't call these tools itself, it instead
provides wrappers for ar and ranlib that pass the LTO arguments. This way
existing Makefiles don't need to be changed for LTO support. However, these
wrappers are called <tuple>-gcc-ar which matches the pattern to link to the
buildroot wrapper in the external toolchain logic. So the external toolchain
logic is updated to provide the correct symlink.
[Thomas:
- Add a separate BR2_BINUTILS_ENABLE_LTO option to enable LTO
support in binutils. This is a blind option, selected by
BR2_GCC_ENABLE_LTO. It just avoids having binutils.mk poke
directly into gcc Config.in options.
- Remove the check on the AVR32 special gcc version, which we don't
support anymore.
- Adapt the help text of the LTO Config.in option to no longer
mention "Since version 4.5", since we only support gcc >= 4.5 in
Buildroot anyway.
- Fix typo in toolchain-external.mk comment.]
Signed-off-by: Peter Kümmel <syntheticpp@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This toolchain is AMD64-only so restrict it accordingly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for AMD steamroller optimizations, available in gcc 4.8+ as
bdver3.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These have been deprecated since 2014.02
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Default to glibc over eglibc where it's possible and/or convenient.
Since the eglibc project is basically gone and merged with glibc it
doesn't make sense to keep defaulting to it for architectures that
aren't uClibc-capable.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
External toolchain can also have been generated by Buildroot previously, as
the list that follows demonstrates. Rephrase the paragraph describing what an
external toolchain is as suggested by Thomas Petazzoni, to make it clearer.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For now we can only support glibc.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Slightly reword a comment to no longer mention avr32.
This part dealing with sysroot detection will have to be reworked, now
that we got rid of avr32: we can now require a fully sysroot-aware
toolchain, i.e. at least gcc-4.4.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, all the installation work of the toolchain-external package
is done during the install-staging step. However, in order to be able
to properly collect the size added by each package to the target
filesystem, we need to make sure that toolchain-external installs its
files to $(TARGET_DIR) during the install-target step.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Jérôme Pouiller <jezz@sysmic.org>
Getting the hashes from upstream is not always possible:
- Mentor's Sourcery: seems to require an account
- TI's Arago: not able to locate the upstream.
- Linaro: only signatures
- Misc other toolchains.
So, all hashes were locally computed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Those toolchains are downloaded from Sourceforge, and are therefore
affected by the Sourcefoge download issues. Therefore, this commit
adds the hashes for those toolchain tarballs.
Fixes:
http://autobuild.buildroot.org/results/fa5/fa5e38246dddd661f1d674f3521d21297796bce3/
(and other similar issues)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-pipe is causing some build failures in Linux kernel >= 3.17.
Also, nowadays, using -pipe does not gain as much as it used to back in
the days:
Measurements made with a 3.16.7 Linux kernel:
make linux-depends
time sh -c 'make linux-build >/dev/null 2>&1'
Without -pipe:
716.32user 54.44system 3:42.12elapsed 346%CPU
721.22user 54.47system 3:41.81elapsed 349%CPU
722.44user 54.00system 3:42.13elapsed 349%CPU
721.03user 53.81system 3:41.92elapsed 349%CPU
713.21user 53.63system 3:40.51elapsed 347%CPU
706.67user 52.42system 3:38.40elapsed 347%CPU
714.40user 53.18system 3:40.16elapsed 348%CPU
706.01user 53.09system 3:37.87elapsed 348%CPU
705.98user 53.01system 3:38.03elapsed 348%CPU
714.17user 53.55system 3:39.98elapsed 348%CPU
Average: 3:40.29elapsed
With -pipe:
720.13user 53.90system 3:41.98elapsed 348%CPU
713.38user 53.69system 3:40.44elapsed 347%CPU
711.60user 52.81system 3:39.06elapsed 348%CPU
708.66user 53.09system 3:38.59elapsed 348%CPU
711.76user 53.00system 3:38.48elapsed 350%CPU
717.85user 53.97system 3:41.77elapsed 348%CPU
716.77user 53.77system 3:40.91elapsed 348%CPU
717.48user 53.65system 3:41.24elapsed 348%CPU
721.44user 55.67system 3:43.45elapsed 347%CPU
724.61user 55.63system 3:43.35elapsed 349%CPU
Average: 3:40.93elapsed
The delta is well in the measurement noise.
Just get rid of it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The CodeSourcery toolchains have a very interesting feature: they warn
the user when an unsafe header or library path is used, i.e a path
that will lead host headers or libraries to leak into the build.
This commit adds a similar functionality into our external toolchain
wrapper, so that it can be used with all external toolchains, and can
also be tuned as needed. By default, the external toolchain wrapper
now gives warnings such as:
arm-linux-gcc: WARNING: unsafe header/library path used in cross-compilation: '-I /usr/foo'
arm-linux-gcc: WARNING: unsafe header/library path used in cross-compilation: '-L /usr/bleh'
but the compilation continues successfully. One can then easily grep
in his build log to search for occurences of this message.
Optionally, if BR_COMPILER_PARANOID_UNSAFE_PATH is defined in the
environment to a non empty value, the external wrapper will instead
error out and abort the compilation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Tested-by: Romain Naour <romain.naour@openwide.fr>
- Fix the help message for CodeSourcery MIPS toolchains
- Add a hash file
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some crazy folks use MIPS machines as build machines. ;-)
On MIPS, the only acceptable hash-style is 'sysv', because the MIPS ABI
defines that the GOT ordering to be the same as the symbols ordering,
while GNU hash requires symbols to be sorted by their hash.
Looking at binutils' code, it seems that only MIPS suffers from that
limitation.
Currently, we force the toolchain wrapper to be linked with both hash
styles, which breaks on MIPS.
So, fix that by singling out MIPS, and use sysv in that case, and both
otherwise.
Reported-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the C library being used is uClibc, the locale support can be
disabled. In this case, it does not make sense to show the "Generate
locales" option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Generating locales is possible in two situations:
- With the internal toolchain backend, when the uClibc library is
used. With uClibc, locales are generated at build time of the C
library, so with uClibc it's only possible with the internal
toolchain backend.
- With either the internal or external toolchain backend when the
glibc library is used. With glibc, locales can be generated
afterwards, using the host-localedef utility.
Until we had the musl C library supported in the internal toolchain
backend, the condition: BR2_TOOLCHAIN_BUILDROOT ||
BR2_TOOLCHAIN_USES_GLIBC was correct to capture the above two
situations. Now that we have musl support in the internal toolchain
backend, then BR2_TOOLCHAIN_BUILDROOT is incorrect, and we should use
BR2_TOOLCHAIN_BUILDROOT_UCLIBC instead.
Basic locale support in musl has appeared in musl 1.1.4, but we are
not yet capable of generating the locale files for musl.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump the ARM, ARMeb and AArch64 Linaro toolchains from 14.08 to
14.09. We can't bump to 14.10, because they completely changed the
toolchains and they are now completely broken: they switched from
Crosstool-NG to a new build tool to generate the toolchain, and now
the sysroot handling is completely borked.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the BR2_GCC_TARGET_TUNE value is always empty now, there is no
longer a point in using it in the external toolchain logic.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Refactor the toolchain-external Config.in file to use the
BR2_ARM_CPU_ARM*. All of the changes are purely mechanical, except for
the Arago ARMv5 toolchain: it had a 'depends on BR2_GCC_TARGET_ARCH !=
"armv5t"', but armv5t was not a possible value for
BR2_GCC_TARGET_ARCH. Since the toolchain is ARMv5TE, the only ARM
architectures we need to exclude are ARMv4 and ARMv4T.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Don't blindly install the /etc/nsswitch.conf file, it's useless for
toolchains that aren't (e)glibc-based and misleading.
Make the installation conditional on a (e)glibc toolchain.
[Thomas: use $(INSTALL) instead of cp.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 2d312b7b61 had a typo
"." instead of "_" in BR2_TOOLCHAIN_HEADERS_AT_LEAST_3.17.
This made selecting 3.17 as custom external headers version
impossible.
Signed-off-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Buildroot coding style defines one space around make assignments and
does not align the assignment symbols.
This patch does a bulk fix of offending packages. The package
infrastructures (or more in general assignments to calculated variable
names, like $(2)_FOO) are not touched.
Alignment of line continuation characters (\) is kept as-is.
The sed command used to do this replacement is:
find * -name "*.mk" | xargs sed -i \
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*$#\1 \2#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\]\+\)$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\ \t]\+\s*\\\)\s*$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\(\s*\\\)#\1 \2\3#'
Brief explanation of this command:
^\([A-Z0-9a-z_]\+\) a regular variable at the beginning of the line
\([?:+]\?=\) any assignment character =, :=, ?=, +=
\([^\\]\+\) any string not containing a line continuation
\([^\\ \t]\+\s*\\\) string, optional whitespace, followed by a
line continuation character
\(\s*\\\) optional whitespace, followed by a line
continuation character
Hence, the first subexpression handles empty assignments, the second
handles regular assignments, the third handles regular assignments with
line continuation, and the fourth empty assignments with line
continuation.
This expression was tested on following test text: (initial tab not
included)
FOO = spaces before
FOO = spaces before and after
FOO = tab before
FOO = tab and spaces before
FOO = tab after
FOO = tab and spaces after
FOO = spaces and tab after
FOO = \
FOO = bar \
FOO = bar space \
FOO = \
GENIMAGE_DEPENDENCIES = host-pkgconf libconfuse
FOO += spaces before
FOO ?= spaces before and after
FOO :=
FOO =
FOO =
FOO =
FOO =
$(MAKE1) CROSS_COMPILE=$(TARGET_CROSS) -C
AT91BOOTSTRAP3_DEFCONFIG = \
AXEL_DISABLE_I18N=--i18n=0
After this bulk change, following manual fixups were done:
- fix line continuation alignment in cegui06 and spice (the sed
expression leaves the number of whitespace between the value and line
continuation character intact, but the whitespace before that could have
changed, causing misalignment.
- qt5base was reverted, as this package uses extensive alignment which
actually makes the code more readable.
Finally, the end result was manually reviewed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Yann E. Morin <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's not supported and the build breaks.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new toolchain release fixes a number of issues found with the previous
one. In particular, the issues with fallocate64, prlimit64 and the
ill-installed linux headers seem to be fixed now.
Therefore, there's not need to sanitize the headers for this toolchain and some
packages should now build fine (e.g. fio).
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's now been replaced with BR2_ARCH_HAS_ATOMICS, annd all packages have
been changed to use that instead.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The fact that atomic operations are available is not really a
specificity of the toolchain, but rather of the architecture.
So, add a new option that architectures that have atomic operations
can select. This in turn selects the current toolchain atomic option,
until all packages have been converted, at which point the old
toolchain option can be removed.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
GCC has several builtin functions that implement atomic operations. Those
functions are architecture specific and may not be implemented by the
specific toolchain. In case of GCC for ARC those functions rely on
LLOCK/SCOND instructions which are optional in ARC CPU's. If ARC CPU doesn't
support those instructions but software tries to use them, then application
will be aborted with Illegal instruction exception. To avoid confusion user
should first specify that their CPU supports atomic extension, which will
allow selection of packages that use builtin atomic functions.
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported in bug #7172 [0], setting BR2_TARGET_LDFLAGS to a value
containing a $ sign can lead to unexpected results.
This is because it is very hard to know when the $ sign gets evaluated:
- in the Buildroot-level make
- in the shell called by the Buildroot-level make
- in the package's own build-system, either at configure time, in the
Makefile, in a shell in the Makefile...
So, it is very difficult to know how much escaping that would need.
A proposal is to use a shell variable to pass such values unmolested.
But it is not that simple either, since it still contains a $ sign, and
there is not much certainty as to when it would be evaluated.
Instead, just document this limitation, both in the help text for
BR2_TARGET_LDFLAGS, and in the known-issues section in the manual.
Does not really fix#7172, but at least the limitation is documented.
[0] https://bugs.buildroot.org/show_bug.cgi?id=7172
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Mike Zick <minimod@morethan.org>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The gconv libraries are used to translate between different character sets
('charsets', even 'csets' sometimes). Some packages need them to present
text to the user (eg. XBMC Gotham).
In (e)glibc they are implemented by the internal implemenation of iconv,
called gconv, and are provided as dlopen-able libraries.
Note that some gconv modules need extra libraries (shared by more than
one gconv module), so we must, when adding a subset of modules, scan the
installed modules in search of the missing libraries.
[Thomas: add general explanation in expunge-gconv-modules and fix
coding style.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Eric Limpens <limpens@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 2014R1 toolchain is provided in two flavours by Analog Devices:
one based on gcc 4.3.x, which is considered stable, and one based on
gcc 4.5.x, considered experimental. In commit
5a65b8e185 ("toolchain-external: add ADI
Blackfin 2014R1 toolchain, remove 2012R1") both variants were added.
However, after some testing in the autobuilders, and discussion with
the Analog Devices folks, it turns out that the experimental version
of the toolchain is too experimental. It causes numerous build
failures, and the Analog Devices folks clearly say that it's an early
release and that they expect quite a few problems to show up.
Therefore, this commit removes the experimental flavor and keeps only
the stable variant. Note that the removal/renaming of the Config.in
options is not a problem, since those options were added after the
2014.05 release.
Fixes:
http://autobuild.buildroot.org/results/2a9/2a9d9c332a206fdb46bc8ba022c74d23082a6312/http://autobuild.buildroot.org/results/e1c/e1ce0c1cdd0139208dddaa8f2441ab0e3ab2385e/http://autobuild.buildroot.org/results/993/993aca3f4719afaa4b37524f9136fb8cdc53a066/
and more.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit b2e88073db (toolchain: check ARM EABI vs. EABIhf for external
toolchains), check_arm_abi accepts a second parameter. Update the comment
accordingly.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since we only need to know whether the compiler runs successfully, and
stderr is empty for the success case, there is no need to redirect stderr to
/dev/null. Moreover, stderr output of the failing case reveals valuable
information on the real failure reason.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch migrates the toolchain and toolchain-buildroot packages to the
virtual package infrastructure, causing the log messages to change from:
>>> toolchain undefined Downloading
>>> toolchain undefined Extracting
...
to
>>> toolchain virtual Downloading
>>> toolchain virtual Extracting
...
and similar for 'toolchain-buildroot', simply because it looks nicer.
At the same time, the directory names also become toolchain-virtual,
toolchain-buildroot-virtual instead of the corresponding 'undefined'
variants.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
However, this toolchain is only usable for e500v2 with the SPE ABI.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
And while we're at it, factorize the definition of the musl version,
since it's common to the definition of the tarball names for the
various supported architectures.
[Peter: Adjust Config.in info to match new version]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds support for two ADI Blackfin toolchains: the 'stable'
2014R1 based on gcc 4.3, and the 'experimental' 2014R1 based on gcc
4.5.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
For some reason, there is no ARMeb toolchain available in the 2014.05
Linaro release.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The major changes are: switch to gcc 4.9 instead of 4.8, and switch to
glibc 2.19 instead of glibc 2.18.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Linaro toolchains are released so frequently (every month) that it
doesn't make much sense to support 3 consecutive versions. So, like we
do for ARM big-endian, let's support only one version at a time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Linaro toolchains are released so frequently (every month) that it
doesn't make much sense to support 3 consecutive versions. So, like we
do for ARM big-endian, let's support only one version at a time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When getting the sysroot used for the kernel headers version check,
passing TOOLCHAIN_EXTERNAL_CFLAGS causes a problem when used with
multilib toolchains, where only the main sysroot has the header files,
and the other sysroots only have the libraries.
Since the kernel headers version used is normally the same for all
sysroots, this commit solves this problem by removing the
TOOLCHAIN_EXTERNAL_CFLAGS argument when calling
toolchain_find_sysroot, so that it returns the main sysroot, in which
<linux/version.h> can be found for the kernel headers version check.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Since the introduction of the kernel headers Config.in options, the
external toolchain logic had a check for custom external toolchains to
verify that the kernel headers version entered by the user matches the
one of the toolchain. However, this check was not made for non-custom
external toolchains (i.e the built-in profiles, such as Linaro,
CodeSourcery and al.), making the assumption that the Buildroot
developers will do the right selection.
However, it is quite nice when bumping external toolchains to have
this automatic kernel headers version check, to ensure we select the
appropriate kernel headers version.
Therefore, this commit makes the kernel headers version check
applicable to non-custom external toolchains.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: fix BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_15 to select
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_14 and not itself.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The assumption that musl libc does not support microblaze
little endian mode is wrong. See
http://git.musl-libc.org/cgit/musl/tree/configure line
number 447-448.
Tested with qemu. Just revert previous commit as suggested by
Thomas Petazzoni.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Musl C library only supports Microblaze BE, not Microblaze LE, so
this commit adjusts the dependencies of the toolchain-buildroot
package to not allow the selection of Musl on Microblaze LE.
Cc: William Welch <bvwelch@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported by William Welch <bvwelch@gmail.com>, the Musl external
toolchain provided by the musl-cross project is only Microblaze
big-endian. In fact, Musl seems to only support the big endian variant
of the Microblaze architecture, with the microblaze-* tuple.
This commit makes sure the Musl pre-built external toolchain provided
by musl-cross can only be selected for a big-endian Microblaze
configuration.
Reported-by: William Welch <bvwelch@gmail.com>
Cc: William Welch <bvwelch@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This enables powerpc64 and powerpc64le. Currently, le needs at least
glibc 2.19 and gcc 4.9.0. For gdb, 7.7.1 works (added in an earlier
patch).
[Peter: also disallow gcc 4.8 for ppc64le]
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for powerpc64le-linux-gnu. This includes
needed patches to fakeroot and gmp.
gmp patch is from upstream HG tree.
fakeroot patch is from Ubuntu written by Adam Conrad.
Signed-off-by: Jeff Bailey <jeffbailey@google.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit cd32da8f79
("toolchain-external: add Linaro ARM big endian toolchain") a mistake
was made, probably due to a rebase conflict that was incorrectly solved:
the call to the post install staging hook that creates the necessary
symbolic links for a root filesystem based on Linaro 2014.02 to work
was removed.
This commit reinstates this call, which should fix the problem
observed by Maxime Hadjinlian while using Linaro 2014.02.
Reported-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently the check for EABI/EABIhf toolchains looks for the
Tag_ABI_VFP_args attribute in the crt1.o file which gcc adds in an
EABIhf toolchain.
In uClibc, however, crt1.o is not compiled from c but assembly, so the
Tag_ABI_VFP_args attribute is not added in the object file. This causes
the EABIhf check in the external toolchain logic to fail for
uClibc-based toolchains.
Fix by compiling a dummy .c file and trying to link the object against the
C library. Since it is impossible to mix EABI and EABIhf code, a mismatch
between the buildroot and toolchain ABI settings will be detected during
this link step.
Fixes bug #6842: https://bugs.busybox.net/show_bug.cgi?id=6842
[Peter: fix final 'fi']
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
[ThomasDS: do full link iso readelf test, update commit message]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
MIPS nommu never took off, the only MIPS processors without MMU are
microcontrollers and the only uclinux effort for them has non-upstream
patches against very very old versions.
See http://www.xiptech.com/uclinuxformips.htm
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Otherwise we're getting musl for everything except those who have a
default (mips64*).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds ten toolchains based on the musl C library that are
publicly available from the musl-cross project.
[Peter: fix ppc prefix, only for classic ABI]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit slightly improves the external toolchain backend, and the
gdb build logic to create a file named
$(STAGING_DIR)/usr/share/buildroot/gdbinit which can be used as a
gdbinit file using gdb -x option. This allows gdb to automatically use
the proper sysroot to find libraries.
The initial insight for this patch comes from the report of Oded
Hanson <OHanson@xsightsys.com>, who found an issue with the Eclipse
Buildroot plugin, which was setting a solib-path in gdb, but not a
sysroot. Setting a solib-path was enough to find shared libraries, but
not the dynamic linker. And since Eclipse doesn't allow to set the
sysroot in any other way than giving a gdbinit file, it makes sense to
have Buildroot generate a gdbinit file (which can be used in other
situations than Eclipse).
To achieve this, this commit introduces a gen_gdbinit_file helper in
toolchain/helpers.mk, and uses it for the internal toolchain and
external toolchain backends.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[ThomasDS: minor updates in commit message]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable the internal toolchain backend for aarch64.
Tested with arm_foundationv8_defconfig and ARMs foundation v8 emulator.
Both glibc & eglibc work.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The usual way to enable a package using the package infrastructure is to
use a config option so instead to add the toolchain package to the
TARGETS variable in the Makefile add a config option like all the other
toolchain packages.
[Thomas: remove comment that no longer made sense in the main
Makefile, and add a comment above the new hidden Config.in option to
explain what it is useful for.]
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Linaro has started to release ARM big endian toolchains, so we
integrate this toolchain in the external toolchain logic of
Buildroot. Since ARM big endian is probably going to be a lot more
uncommon than ARM little endian, we will only support one version at a
time of this toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The information "To use this toolchain, you must disable soft float
usage." which was visible in the help text of Linaro toolchains is no
longer useful, since those toolchains are only visible when the ARM
EABIhf ABI is selected, which by design is not compatible with
soft-float.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The Nios-II Sourcery external toolchain (the only Nios-II we currently
support) exports broken kernel headers. In particular, these kernels should
be exported using the "headers_install" rule which applies a set of fixes
on the kernel headers so they are suitable for userspace usage.
In order to fix this, add a post-install hook to perform the header fixes
ourselves. The result is equivalent to apply the "headers_install" rule.
Fixes:
http://autobuild.buildroot.net/results/c32/c32ad4bac5f651502e551f7733f702afaa0e742a/
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
